Testing of Idoc to file scenario

Hi Gurus,
I have completed the Idoc to file scenario, But how should I test the whole scenario??!!
Because of my functional guy is absent for this week and I do want to test my scenario, whether its working properly or not??!!
Note: As I knew, we19 tcode, it asks some Idoc number and other info to do the same.. could you please help me out?!!
Thanks.,
Stallin

Hi
Just for testing purpose..you can use WE19..
First goto transaction WE02 and put Basic type : MATMAS03 as filter criteria, change your creation date to select little old idocs and run...on next screen your will see number of idocs "MATMAS03" with green status(if there is any in that period..otheriwse change period again).
Then goto WE19 and put existing idoc number in the field existing idoc and and presss F8...On next screen press "Standard outbound processing".
Can also use we19 and change control record ( Double click in EDIDC segment) to your sender / recever partner profile.. and run
Thanks

Similar Messages

How can we do the Testing in Idoc to File Scenario( With out using We19)

Hi All,
As all we know we can generate the Idocs from SAP R/3 to XI using the change Pointers,this we will apply in Production time.
But as of now in the Test system we can'd do it daily.
So we have already created materials in the SAP R/3 system.
I want to send the Idoc to XI by selecting some n number of materials.means i want to generate the Idoc for materials.this is like i have to do repeatedly for testing purpose.
Is there any T-code
How can we do this
Regards

Hi Vamsi,
   For the Message Type ORDERS you can configure Output Type (txn NACE) for IDoc generations and then you can trigger the IDoc using transaction WE15.
Selection Parameter will be as follows
Output application: This will be from Output Type
Object key          : Order Number
Output type         : Output Type name, that you configured
Transmission medium : A
Check the checkbox "Send Again".
Thanks,
Punit

How To Test Idoc To File Scenario in ID From Tools- Test Configuration

Hi All,
Can any body help me in step by step process including screenshots for testing Idoc to file scenario in integration directory from tools->test configuration.
My scenario is passing the PO Idoc data from R/3 into a file using XI.
i have processed the idoc from R/3 and now i went to sxmb_moni in XI system and took the payload xml data.
In ID I have navigated to test configuration from tools then i have provided the following information.
Sender Service : Business system of R/3 b'coz here R/3 is the sender.
Sender Interface : ORDERS.ORDERS6
Receiver Service : Business system of XI b'coz here XI receives the data and         places it into a file
In payload text box i have copied the xml code which i have taken from sxmb_moni and clicked the run button. then i got the following error:
Sender Agreement
Internal Error
                 HTTP connection to ABAP Runtime failed.
                 Error: 403 Forbidden
                 URL: http://bxdci.boewe.custservice.de:8093/sap/xi/simulation?sap-client=100
                 User: PIDIRUSER
Kindly look into it and correct me if iam wrong or is there any other way to test this scenario in ID please suggest.
Thanks & Regards,
Venkat

Hi Venkat,
Specify the test confisuration as follows.
<b>Sender</b>
Service   : Business System of SAP R/3 System
Interface : The outbound message interface name of type the IDOC.
Namespace : will automatically loaded when u select the Interface. Check if it the correct namespace.
<b>Receiver:</b>
Service : Business System name for the Fle system.
Paste the payload that u copied from the sxmb_moni.
Now click on Run and test ur Scenario.
Was the scenario sucessfull in the Message Monitor.
Regards
Santhosh

Test IDOC to File scenario

Hey guys
i m doing a IDOC to File scenario and am stuck at testing it.i went in we19 but dont know how should i test my scenario there.
any idea how should i test my scenario
thanx
ahmad

Hi Ahmad,
IDOC to File
R3 system.
1. Create SM 59 RFC destination to XI,.
2. We21 - Create port to XI.
3. We 20 -- Maintain Partner Profile for the outbound Idoc.
XI SLD
1. Create technical system for R3 system
2. Create Business System for the Client of the R3 system.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
These are the required steps for IDoc to File scenario...
In R3 (i.e., your IDES system)...
RFC dest to XI (sm59) - any name
Logical system (bd54) - any name
Port to XI (we21) - any name
Partner profile for the logical system (we20) - use Logical system name created in bd54
In XI...
RFC dest to R3 (sm59) -
Port to R3 (idx1) -
create metadata for the idoc (idx2)
In sld...
create business system for R3 with Logical system name as r3 sys.
In we19
and give in control record as
Sender : Port ; Partner
Receiver : Port = <Port created in WE21> ; Partner = <Partner created in we20>
Regards..
Ramesh.

Unable to Test Idoc to File scenario

Hi All,
I am doing Idoc to file scenario.But dont know how to test this scenario.
I have done all the configuration in Backend and XIServer system.
Please help me out.
Thanks in Advance.
Regards,
Vikas

HI
Chech that these steps have been done
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
One these are done
1) U can trigger the the IDOC by scheduled job in BD87 immediately after the document is saved in R/3
2) Using transactions like bd10 and bd12 u can trigger IDOC for master data
3) While creating the partner profile there is a option trigger immediately . By enabling this option the idoc gets triggered.
4) Using the transaction WE19 u can trigger the IDOC mannually
Regards
Santhosh

IDOC to file scenario testing error --

Hi experts ,
When doing an IDOC to file scenario the status of the IDOC in XI (the Trace section @ SXMB_MONITOR) shows that
PARTY &SERVICE NOT DEFINED
the failure occurs at message splitting stage .
more details :
the sender is represented as a business system
the receiver has no party and has only a business service
By chance when i tried to check message status in INTEGRATION ENGINE @ RWB
i was able to find that XI is trying to send the mesasage to Receiver with party name 12345 this 12345 is the same which i gave in we20 as the partner number .
What could be the reason ?

This is the error
Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party 0000002569 and receiver service</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) 0000002569 DELINS.DELFOR01</Trace>

Problem in idoc to file scenario

hi
while creating the idoc to file scenario i am facing few problems.
1) My design time objects are working fine. i have checked my message mapping, message interface etc.. (all design time objects are in active mode).
2) In ID, i have tested my configuration in test configuration, its working fine there as well (in ID i am using 2 business service one for sender, one for receiver)
3) i am using my ecc6 training server as my sender and using my XI server as receiver.
4) i am sending idoc from ecc6 and converting it to file in XI server and saving it in XI server itself(my receiver in this case).
my error:
i send my idoc from we19 transaction, and i see a error message stating
that 'RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC'
my doubts.
1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
kindly help me with this issue.
regards
manoharan

>
manoj murugesan wrote:
> 1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
>
> 2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
>
> 3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
>
>
> kindly help me with this issue.
>
>
> regards
> manoharan
and to 1 & 2 ref. below,
Configuration steps required for posting idoc's(XI) -
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
ALE configuration for pushing idocs from SAP to XI -
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
3. NFS protocol is used to read/write files to the XI server itself. If you have to write to a local machine then use FTP

ALEAUD in IDOC to File Scenario

Hi,
I have a IDOC to file scenario in which im sending the PAYEXT IDOC from SAP to a bank as the IDOC-XML.
ie the user will create a payment in the SAP system , this shoud trigger an IDOC to XI. XI puts the IDOC-XML sturcture into a FTP folder path from which the bank will pick it up. Now the bank has to send an acknowledgement(asynchronously) that the payment was processed. And this response should be captured and returned to the user.
can we use ALEAUD as the acknowledgement or does using ALEAUD make no sense here?

Hi,
Assuming that the bank will send you a file to the FTP server you can simply pick up this file and mapi it to the Systat IDoc. I would assumt that the IDoc status's would not be in the file so you would have to do some value mapping or other logic to determine the IDoc status codes that you want.
The IDoc is very simple with few fields so the mapping should not be a problem.
Please note you do not use BPM for this scenario. In essence this would be a new flow of File --> PI --> IDoc
Import the STATUS.SYSTAT IDoc into the Design and play from there, you can make a POC now and test the functionality which would probably be best for you at this point.
Let me know if you need more details
Edited by: Alexander Ong on Jul 14, 2009 4:57 PM

Idoc to file scenario error

Hell Experts,
I have done desgin and configuration from Idoc to File Scenario in XI Intergration server.
Source is R/3 and Target system is File. I have successfully configured each and every step. Send Idoc from R/3 to Intergration server and run sxi_cache. But I didn't get successful results, always the error message shows in SXMB_MONI as follows:
Ackn Status contains system error
During the application mapping com/sap/xi/tf/_CUST_MMAP_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeExcep
tion in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
My system Patche level as follows:
SAP_BASIS     640        0012        SAPKB64012
SAP_ABA     640     0012                SAPKA64012
PI_BASIS     2004_1_640 0009        SAPKIPYI69
SAP_BW     350     0009                SAPKW35009
The above error is related to patches problems or any Mapping problems ?
Please help me.
Advanced Thanks.
Regards,
Chandra

Hi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
i am not sure of the patch levels.
Regards,
Anirban.

IDOC to File scenario Configuraton settings

hi,
   I am doing IDOC to FILE scenario.I am sending IDOC from R/3 to XI and then to XML file.That mean smy scenario is as Follows ( R/3XIfile ) These are my queries
-->I have created RFC Destination from R/3 to XI.should I need to create RFC destination from XI to R/3 ( i mean In XI )??
-->I have created one Port in R/3 and I have linked that port with RFC Destination that i have created.here i am sending IDOC from R?# to XI...SO we call this PORT as SENDER PORT or RECEIVER PORT??
-->and DO we need to create PORT in XI also??is it require for my scenario??
-->DO we need to create Partner Profiles in XI also??
-->DO we need to create LOgical system in XI to represent the XI system?? (as we created LS in R/3 to represent sender system)
--->Here is my big doubt..
               when we test IDOC ..by sing we19 TCODE,
   We need to fill the corresponding details as below,
Receipent                                  Sender
Port                                              Port
PartnerNo                                      PartnerNo
PartnerType                                   PartnerType
my Doubt is,
-->>In which field we need to specify the Port that we have created in R/3..Receipent side OR Sender Side..?? and Why??
-->>Same for ParnerNo..where we need to specify the Logical system which we have created in R/3 should specify??Why??
Please give reply ASAP..with detailedexplanation..
points will be rewarded..
regards,
murali

HI
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You donu2019t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You donu2019t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD u2013 System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system names
cheers
reward poins if found useful

37 Status code in IDoc to File Scenario

Hi Experts,
I developed Idoc to file scenario, in the PI side all the design time and configuration objects are good .
while I am testing from SAP backend system (All required configuration steps are also good).
I was send the Vendor information details (CREMAS05) by using the Transaction code WE19 , after that I was test with IDoc list by using Transaction code WE05(IDoc list) I am getting status code 37 . what might be the problem.
please help me.
Thanks in advance,
Regards,
Sudeepth.

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

ABOUT DATA SENDING IN idoc TO file SCENARIO

How the data is sended in idoc to file scenario?
what is the difference in sending data through BD10, BD14 and WE19 ?
Is the data is sended through XI OR R/3 SYSTEM?

Hi Rammohan
>> How the data is sended in idoc to file scenario?
     Makeing settings in SAP R/3 side then based on the RFC
     destination,port,parterner profiles.....
     Idoc can hold the data with out any direction but RFC port will direct where to
    go ...based on the partner profiles (Out buond IDOCS)
>>what is the difference in sending data through BD10, BD14 and WE19 ?
    BD10,BD11,BD12,BD13,BD14 will be to send the master data automatically
    generally will be in the production(But not for testing) and this will be depending
    on the declaration of profiles in the BD64
    --- But we19 will be used to test the Idocs with any data
        but here we need to give all the parameters like senders,receivers,ls,idoc...
>> Is the data is sended through XI OR R/3 SYSTEM?
     Data will send through XI i.e XI will receive the Idoc and Convert into XI specific
     SOAP XML message and process all the pipe line steps ...based on the target
     it will send
     Here target is file so choose the file adapter as target and give all parameters
     it will work fine
I hope this will answer your question
regards
--- prasad

Error Resource not Found in SXMB_MONI while doing IDoc to File Scenario

Hi Experts,
I am doing IDoc to File Scenario and I am facing Following Error in SXMB_MONI,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>193c0e01-bd37-11dd-850c-d879ac131b1f</SAP:P1>
<SAP:P2>http://clarityPOC</SAP:P2>
<SAP:P3>com/sap/xi/tf/_MM_Timesheets_iDocToFile_.class</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have tested the same file in test tab of mapping, execution of mapping is successful there.
Regards,
Nitin Patil
Edited by: Nitin Patil on Dec 5, 2008 7:09 AM

Hi Dharmveer I have done the cache refresh ID in XI Data Cache Refresh using link
http://sapnbipoc:50000/rep/support/admin/index.html
but still same error persisting
and in Integration Builder> Environment>Cache Status Overview >Problem tab
following error (initial part of the error pasted) is shown
Thrown:
com.sap.aii.ib.bom.landscape.SLDElementNotFoundException: Adapter Engine af.npi.sapnbipoc not found in SLD
     at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:56)
     at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:41)
     at com.sap.aii.ib.server.abapcache.logons.IR_LogonData.<init>(IR_LogonData.java:26)
Regards,
Nitin Patil

Error in TRFC for IDoc to File scenario while sending IDoc

Hi,
Configured of 'IDoc to file' scenario is completed. Executed a stand alone program to post IDocs to XXI system using a RFC destination with required previleges.
Outbound IDoc has status successful, but it is blocked in the source system and can be viewed in TCode: SM58 (Transaction RFC). The error status is set as ':00'.
When I tried menu item 'Edit>>Execute LUW', I got the status message as 'Function module does not exist or EXCEPTION raised'.
For your information, User used in RFC destination is communication user with SAP_ALL profile(in XXI system).
Can anybody help me out in resoving the error?
Regards,
Suraj Kumar

Hi,
Thanks for your reply.
It is successfully tested and FYI as the user specified in RFC Destination is a communication user in destination system (XI), it does not have remote logon.
Hope I am clear.
Please let me know, if you need any further information.
Regards,
Suraj

Idoc to file Scenario not working

Hi ALL,
I have created one Idoc -XI-File scenario.I have done all the preconfiguartion in Backend and XI.
Now when i am testing in we19, it is showing that Idoc is sent and saved in the database but when i am going to sm58, there it is showing Status field "No service for system SAPSAI, client 800 in Integration directory
Can anybody tell where i am going wrong???
Thanks in Advance
Regards
Vikas

Hi,
Now i am able to see the message in sxmb_moni , it is showing Green status, but still am not getting the file in reciever side.
In communication channel monitoring it is showing green status,but not giving any messages theres
Any suggestions what do to next to get the file??
Thanks
Regards
Vikas
Message was edited by:
Vikas Agarwal

Testing of Idoc to file scenario

Similar Messages

Maybe you are looking for