Testing of IDOC2FILE scenario of XI

Hi All,
I have been with the scenario, FILE2IDOC. I triggered the IDOC from R/3 system by using WE19. Here IDOC is successfully sent and i am sure that there is no stuck in SM58 also. Then i am trying to see the Message in SXMB_MONI, there is no message. In SXMB_MONI, i got the message: "No messages is available for selection".
In XI side, i gone throught the tcode WE05, here i got the message: I
"Doc: 0000000000005007 Status: Application document not posted &
Function module not allowed: APPL_IDOC_INPUTI".
Please try to understand my problem, and give me the solution for this issue.
I am very thankful to you in advance.
Thanks,
Nagarjuna.

Hi.
What is your scenario ? Is it IDOC To File or File To IDOC ?
As per the subject it is IDOC To file..if so in WE05/WE02 status of IDOC should show green in R3. and then you can check the status in SM58 so that you can ensure that IDOC is sent from R/3 to XI.
If so you should see the Message in SXMB_MONI.. Check the Start Timings [ Give 5 hours etc back]in the SXMB_MONI Screen..
As per the content of your post, File to IDOC scenario, if so you need to send the file and then need to see the processing steps for the same... check out the sender file channel is working fine..
Rgds, Moorthy

Similar Messages

How to test IDOC2FILE Scenario

Hi All,
Now i am working on IDOC2FILE scenario. I have done all ALE settings in R/3 side with RFC destination, port, Partner profile.
At XI side i created RFC destination, Port and Partner profile also.
And i pushed the idoc from R/3. I got the status messages like
"IDoc: 0000000000001018 Status: Data passed to port OK" and "IDoc sent to SAP system or external program".
But in XI, i got the following messages:
"IDoc: 0000000000005005 Status: Application document not posted" and
"Function module not allowed: APPL_IDOC_INPUTI".
All my design time and configuration time objects are done and activated.
Here i am using the business service for sender system. sender is R/3 system.
Anybody, came across this problem, could you please revert back to me with solution. I want step-by-step testing procedure.
Please getback to me with proper solution asap.
Thanks & Regards,
Nagarjuna.

Hi Sarvesh,
Thanks a lot. I already triggered the idoc in we19 and please go through the following once again:
I have done all ALE settings in R/3 side with RFC destination, port, Partner profile.
At XI side i created RFC destination, Port and Partner profile also.
And i pushed the idoc from R/3. I got the status messages like
"IDoc: 0000000000001018 Status: Data passed to port OK" and "IDoc sent to SAP system or external program".
But in XI, i got the following messages:
"IDoc: 0000000000005005 Status: Application document not posted" and
"Function module not allowed: APPL_IDOC_INPUTI".
All my design time and configuration time objects are done and activated.
Here i am using the business service for sender system. sender is R/3 system.
Anybody, came across this problem, could you please revert back to me with solution. I want step-by-step testing procedure.
Please getback to me with proper solution asap.
Thanks & Regards,
Nagarjuna.

How to test the B2B scenario ?

How to test the B2B scenario ?
Because the client may not give permition to test, then i heard one thing in RWB we can test the data, how and where we can test the data ?

Venkat,
Follow the below procedure.
Go to RWB, choose Component Monitoring , click Click Display
Expand Integration Server node -Click Integration Engine .
In the bottom of the page go to TestMessage tab.
In the Service/Interface/InterfaceNamespace enter the Sender Service & Outbound Interface details
Enter your username & pwd and choose the qos.
Paste the payload in the payload area.
Now click SendMessage .
Done!
raj.

IDOC2FILE scenario

Hi All,
I am going to develop idoc2file scenario in XI. Any body have the full documentation with step-by-step process(including R/3 settings & XI settings), Please send me ASAP.
I am very thankful to you in advance.
Thanks & Regards,
Nagarjuna.

Hi nagarjuna,
ALE configuration
Steps to do ALE Configuration with respect to IDOC:
Configuration in R/3:
1. Create a RFC destination using Transaction = SM59
2. Create the ports using we21 and refer the port to the created RFC dest in above Step.
3. Create a Logical System using Transaction BD54.
4. Create a partner profile using transaction WE20.
Also need to configure in XI:
1. Create a RFC destination using Transaction = SM59
2. Create the ports using Transaction IDX1 and refer the port to the created RFC dest in above Step.
3. The port has to be displayed in the IDX2 transaction and we should be able to view the idocs which we imported through integration repository otherwise we have to manually import the idocs from IDX2 using the port created above
Please refer to these blogs:
Complete process for Idoc to file scenario:
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
incase you are struck with any issues while creating the scenario refer to this blog;
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Hope this will help you:)
reward points if helpful
regards,
Nithiyanandam

Problem in TRFC queue (SM58) - IDOC2FILE scenario

Hi,
I am executing IDOC2file scenario. In the transaction we19, i have successfully posted the IDOC to external system (XI).
But the iDOC is still in TRFC queue. (SM58 or BD87).
Recipient details
Port : RFC in We21.
Partner No. : XI logical name.
Partner Type: Logical system.
Sender details
Port : SAPBIW
(This is the confusing part, I was told that first three letters should be SAP and next three should be SID of the SAP system).
Is this mandatory. But my TRFC (we21 in BW) didn't have any such port, so i created one.
Partner No. : BIW logical name.
Partner Type: Logical system.
I am getting this error in SM58
Transaction IDX1: Port SAPBIW, client 001, RFC dest contains error.
Now i want to know what is the problem because of which IDOC is not being to pushed to XI

Hi,
go to sm58 and release or delete that queue, next time idoc will not stuck in the queue.
<<<Port : SAPBIW
(This is the confusing part, I was told that first three letters should be SAP and next three should be SID of the SAP system)Is this mandatory
It is not mandatory, you can leave this option blank.
Thanks

ALE settings for IDOC2FILE Scenario

Hi All,
I have the requirement to work on IDOC2FILE scenario. i am not able to do the ALE settings well in both R/3 side and XI side. Anybody have the full documentation with step-by-step analysis, please send me ASAP. Please help me in this regarding.
I am very thankful to you all in advance.
Regards,
Nag.

Hi Nagarjuna kumar ,
The following websites give u step-by-step solution for ALE settings for IDOC2FILE Scenario:
A Step-by-Step Guide on IDoc-to-File Using Business Service in the XI Integration Directory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
How to convert an IDoc-XML structure to a flat file and vice-versa in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Introduction to IDoc-XI-File scenario and complete walk through for starters.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
IDOCs (Multiple Types) Collection in BPM
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
cheers!
gyanaraj
****Pls reward points if u find this helpful

How do u test the entire scenario in XI?

How do u test the entire scenario in xi?

Hi,
If you need to test only the mapping then you can go to Test tab in Message mapping or Test tab in Interface mapping and test it.
If you need to test the entire scenario without adapters you can go to ID and select the menu Test Scenario.
OR
You can go to Runtime Workbench and when you click on the Integration Server you will find the Test tab in the bottomthere you can test the same.
The above dose'nt include adapter, if you need to tes it with adapters then you need to test like actually realtime execution.
Regards,
Prakash

How can we testing the MDM Scenario

Hi
As per in XI we use to test the scenario by using SXI_MONI and other onesu2026Like this is there any process to test the MDM scenario ..
Thanku
yuga

Hi Yugandhar,
As far as I know,MDM has no such Monitoring Facility within the tool.
There are differnet parameters on basis of which you can monitor or test the performance by considering these factors while building the rep
- Parameters to be decided while creating the data model by proper selection of the field properties.
- Correct Sizing
- Taking backups
- Correct setting sin the server ini
- Configuration settings in the MDM client
- Proper setting for automation of importing and syndication
If you have XI in your landscape then you can use it for minitoring purposes.
Within MDM you can only Verfify and check your repository from time to time and take backups lin the form of archieve and duplicate repository for maintainence purpose.
You can also use the MDM workflow to control and monitor the flow of Data records and it enrichment.
You can also use Clix to monitor the MDM repository connection and protection using the command line interface
But there is no specified and dedicated testing feature in MDM.
Hope It Helped,
Thanks & Regards
Simona Pinto

Performence test and dcoument scenarios

Hi Experts,
i need Performence test and dcoument scenarios of the G/L Entry both ledgers.
any one please send one Performence test and dcoument scenario.( Related document)
Regards
Msr

I think as a BW user , you are supposed to do a application level checkout of the systems after BASIS finished the update.
Application level checkout is done to make sure that the connections between source systems, between BI (dev, test, prod) systems.
Application level check usually requires you to confirm to BASIS regarding ALE , TRFC level communications between systems.
A simple test would be to execute a simple known infopackage and verify the data from source systems. This verifies the conncetion between source and BI systems.
A transport between BI systems checks connections between them. Make sure that u donot transport into production before testing in CONS.
--Thanks
IM

Trigerring idoc in idoc2file scenario

Hi
how the idoc is triggered in scenario idoc2file,in which idoc is on sender side and file on reciever side.
regards
prasad

Hi,
Once you configured the ALE settings, ask your functional people to generate the idoc. then goto we02 take the IDOC number fom there and paste it in WE19 ( IDOC Test Tool)
And then u can send the IDOC from R/3 to XI in this way
ALE Settings
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Reposting IDocs instead of Recreating - For Testing
/people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi
IDOCXI-File Scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
REgards
Seshagiri

Error while testing sender SOAP scenario from XMLSpy-but can test from RWB

HI,
I developed one scenario with sender SOAP adapter and Receiver side ABAP proxy.
Now I want to test my scenario.
I tested my scenario successfully from RWB-->Integration server Integration Engine. ( it posted successfully and I can see checked flag in SXMB_MONI)
But when I tried to test the scenario fro XML spy it is throwing HTTP error 500.
When I type my URL in internet explores it is giving Message Servlet is in Status OK.
I am not sure what is the difference between there two type of testing.
What does it mean by successful from RWB and fails from XMLSpy?
Why I am getting this error from XMLSpy?

Dear Ashok,
if RWB showing you successful then message in not in error.
XML Spy giving error HTTP 500 not it is just server error.This might be due to large payload.
here is the description of all error related with 500+
5xx Server Error
The server failed to fulfill an apparently valid request.
Response status codes beginning with the digit "5" indicate cases in which the server is aware that it has erred or is incapable of performing the request. Except when responding to a HEAD request, the server SHOULD include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. User agents SHOULD display any included entity to the user. These response codes are applicable to any request method.
500 Internal Server Error
501 Not Implemented
502 Bad Gateway
503 Service Unavailable
504 Gateway Timeout
505 HTTP Version Not Supported
506 Variant Also Negotiates (RFC 2295)
507 Insufficient Storage (WebDAV) (RFC 4918)
509 Bandwidth Limit Exceeded
This status code, while used by many servers, is not an official HTTP status code.
510 Not Extended (RFC 2774)
first ping your server
Tcode for this is SM49>ping
Then in additional parameter put the server IP and execute it will show you its reachability.
if it is not reachable then contact the server vendor,
Else if it is timeout problemthen
you run Tcode SXMB_ADM>intregration engine configuration
put category RUNTIME
then click specific configuration
Then change/increase HTTP timeout
**PS: Reward points if useful**
Regards,
Sumit Gupta

How do I test Sender SOAP scenario?

Hi
Soap - IDOC.
The authorizations on the WS to send data is not yet provided to me.
thus, I m trying to send a sample data from Altova XML spy.
For this purpose I have created a WSDL from ID (Tools -> create WS)
in Receiver NS, receiver MI, I have given receiver side details only
but in sender side NS and MI and Sender service, I have given the Sender service that I have created in ID and the XI's local NS and receiver MI
For URL, I have selected on "Propose URL". Now will I be able to send data to the R3 server with this link?
(R3 is production server in my network)
now with that WSDL, I coudlnt validate in XML SPY.
have I provided the correct details?
Please suggest me is there any other way of testing Sender WS to IDOC?
Thanks and Regards,
Venkat.

oops I guess I have confused u
let me detail it again
Scenario : SOAP - XI - IDOC
The scenario is finished.
I dont have authorizations on WS to logon n send the data
Thus, I have created WSDL from ID (in XI)
now I want to send data to XI which inturn will post the data to R3 and create a IDOC
when I try to validate the WSDL created through XI using SPY, it couldnt validate and I couldnt send the request
I want to send the data from outside XI and I want to generate a IDOC with the test data I have specified.
how do I do it?
Hope I made it clear this time
Thanks,
Nikhil.

XI testing POS Integration Scenario

Hi Folks ,
I am new to XI environment and have a query:
I am configured a process integration scenario for sending TLOG to POSDM. Can you pl advice how can I go about testing my config. At present I do not have any POS-GM system running so I was wondering that I will have to put my *.txn file in the "Source Directory" specified folder...
How can I do a test ..pl advice.
thanks!!

Hi sunny,
No problem .........
Please go thru this simple file to IDoc scenario.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/fileToIDOC&
and if you want to explore more about XI .. sure you want to ...then check out the following step by step scenario guide
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/step-by-step+guides
It will be helpful ......
regards
Ashwin

How to test a webservice scenario...

Hi,
In SAP PI, I need to test a scenario that involves webservice. I can see in Integration directory
that a communication channel has been defined as sender with adapter type as File. So I assume that a file is being picked up
from the FTP server.
Also There is another comm channel of type receiver, adapter type as SOAP with a target URL.
Now I dont know how to test this ? Any pointers how to check
from where this request to webservice is initiated ? I have not worked
on web service scenario before, so need help to understand to test the end to end.
thanks

HI
Your's is a file to SOAP scenario, to test this follow this steps:
Now I dont know how to test this ? Any pointers how to check
from where this request to webservice is initiated ?
1. Do you have test data? any file that is archived in sender FTP under archive directory.If not then go to your
    mapping progrram->test tab-> fill test data (all mandatory fields)->switch to xml tab- Copy the whole content
    ->save it in a text pad->see the file name maitained in the sender file adapter->rename the file and place in
     the location mentioned in the sender FTP.
2. Check in RWB if the channels is active and you can see the file being picked in the log ,you can see SXMB MONI
also if there is checkerd flag.
3. To see if the soap posing has happened or not you can see the soap channel monitoring in RWB and read the log
    or you can confirm the posting with the team which received the data( portal /Webservice).
Regards,
$rinivas

Testing XI SOAP scenario via XMLSpy

I've completed the following -
1. Created the scenario SOAP => XI => RFC
2. Using XI config, generated WSDL specifying the Message Interface which triggers the scenario in XI.
http://<serverhost>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<ServiceName>:<Channel Name>
3. Transported this WSDL to local directory
4. Testing WebService by sending a SOAP message using XMLSpy. Option Soap=>Send request to Server.
I don't see any pop-up to enter xiappluser and password .
I get the following popup error message
HTTP error: could not POST file
'/XISOAPAdapter/MessageServlet?channel=:HTTP_LINK:testSoap&version=3.0&
Sender.Service=HTTP_LINK&Interface=urn%3Agoodyear.com%3AInfoLinkToSAP%5EInfoLink_XML_Req_Sync_Abs' on server 'xi0.goodyear.com' (404).
Please let me know if there is anyway to resolve this error condition.
Thank you.

Hi Prasad, thank you.
Niall Guerin wrote me a message in which he explained that some of my XI components are inconsistently patched. I will verify and correct that.
Thanks again.
Ivan
Hi Ivan,
Thanks for the patch level information above. Your components are not
up to date.
As you can see the following XI AFW components are inconsistently
patched:
sap.com SAP-XIAFC 3.0 SP12
sap.com SAP_XIAF 3.0 SP17
ALL XI components MUST be on the same patch level. This means:
XIAFC, XIAF, and XITOOLS must all be on SP17. The same goes for the
ABAP stack. Basis must be on SP17 and so must your J2EE Engine. With
XI, ALL patch levels must be consistent as a prerequisite. Please
refer to attached note: 750511.
In addition, it looks like you've got a PCK deployed on the XI host
as well? A PCK cannot co-exist with an XI installation, so please
ensure you did not do this and undeploy it if it was installed on top
of the XI host.
Please patch the XI Java components correctly and then reproduce the
SOAP Adapter problem after sending a soap request to the adapter.
For more information on the message status in your screenshot, refer
to the weblink below. This is an enhancement with SPS17 for the Runtime
Workbench:
Communication Channel Monitor
http://help.sap.com/saphelp_nw04/helpdata/en/44/2a1a8620323f0ee10000000a114a6b/content.htm
Kind Regards,
Niall Guerin

Testing of IDOC2FILE scenario of XI

Similar Messages

Maybe you are looking for