Testing RAC installation

Hi all,
I followed http://www.oracle.com/technetwork/database/clustering/overview/rac112014-ovm-tmplt-test-config-365617.pdf to setup a 2 node rac using Oracle VM manager. I have went through all the steps, and now i am wondering how to test the setup and see if the RAC functioning correctly.

Hi,
if you have access to support.oracle.com you can download a testplan from the RAC Startekits, which would help you find corresponding test cases.
If your VMs are running a "crash" of a server can easily be simulated by using "xm destroy" on the commandline of the OVM server.
Storage errors are more difficult to reproduce, since the "xm block-detach" does not work if the lun is still accessed by the VM. So testing a storage error is difficult in these environment.
Don't think a DD can simulate a storage error => it doesn't !
Regards
Sebastian

Similar Messages

How can I test the RAC installation

Hi All,
I would like to test my RAC installation is done properly or not. How can I use Oracle Cluster Verification Utility this software.
thanks,
Venkat.

Post-checks for hardware and operating
runcluvfy.sh stage -post hwos -n node1,node2
Shared Storage Check
sh runcluvfy.sh comp ssa -n rac1,rac2
Post-checks for cluster services setup
cluvfy stage -post crsinst -n rac1,rac2
Verify Cluster Integrity
cluvfy comp clu -n rac1,rac2 -verbose
Verify Cluster Manager Integrity
cluvfy comp clumgr -n rac1,rac2 -verbose
Verify Node Applications
cluvfy comp nodeapp -n rac1,rac2 -verbose
Verify CRS Integrity
cluvfy comp crs -n rac1,rac2 -verbose
Verify OCR Integrity
cluvfy comp ocr -n rac1,rac2 -verbose
also check:
crsctl check crs.
votingdisk check:
crsctl check css votedisk
ocr check:
#ocrcheck

Oracle 11gR2 RAC installation with DNS

Dear Guru's,
I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
O.S: RHEL5.4(64 bit)
Oracle Version: 11gR2(11.2.0.2)
Note: Am creating nodes in VMware ESXi server.
Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
Bala :)

Hi Bala,
I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
- http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
- http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
- http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
Very good videos:
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
Hope it helps,
Best regards,
Gena

Oracle RAC installation failover

Hi,
I have an Oracle RAC installation with 2 nodes with the data stored on a shared OCFS partition. I had a client test the connection using jdbc string for RAC failover. I tried shutting down one of the nodes on the RAC installation and the client could not connect to the oracle cluster database for the next 5 to 10mins.
I understand that the client would failover to the next available listener (On the next retry connection) if the node it is currently listening to has failed. Is there any configuration i should make to increase the failover efficiency?
Thanks for any advice.

Hi,
Server side failover is arranged by setting the remote_listener parameter.
Client side failover is set by using T(ransparent) A(pplication) F(ailover) (9i and higher)
or F(ast)C(onnection)F(ailover). Both are documented in the Net administrators manual for the version you didn't care to mention.
As far as I know, both TAF and FCF are not supported by the JDBC thin driver.
Sybrand Bakker
Senior Oracle DBA

Consultancy Services for RAC installation and Internet Security Audit

Dear All,
"Warm greetings from Venkatesh"
We are proud to announce that, we have started a leading Database, Networking and Internet security Consulting organization at PUNE with a global presence through which we offers a focused, Excellence Solutions for Database, Networking and internet security for vulnerabilities and ethical hacking to the organizations to achieve a sustainable performance and results, and to contribute to the delivery of Quality Product, Solutions and Services to transform the human lives every day.
We offer a customized Consulting and Corporate Training Services at competitive sizes of organization in all major verticals for Performance Excellence as under with six months maintenance support after RAC installation
Design and Implementation of Oracle RAC (Real Application Cluster)
- Oracle solution for High Availability & Grid Computing
- Versions: Oracle 10gR2, 11gR1 & 11gR2
- Operating System: Linux, Windows, Solaris, AIX
- Storage: ASM, OCFS2
- ASM Cluster File System (ACFS) in Oracle 11gR2
- Building RAC setup in VMware Environment
- Feature: Load Balancing, Failover, Dynamic addition of Nodes to Grid
Design and Implementation of Oracle Data Guard
- Oracle solution for Disaster Management
- Primary & Secondary Sites
- Logical & Physical Standby Database
Internet Security Audit for Vulnerabilities and Ethical Hacking
- Penetration testing
- Source code audit
- Information security training
- Website design and development
- Data Centre audit
- ISO 27701 consultancy
We also offer Corporate Trainings for
- Oracle RAC Administration
- Automatic Storage Management (ASM)
- Data Guard
Please feel free to revert back for any queries.
Regards
Venkatesh
mail: [email protected]
Edited by: vjpune on Apr 17, 2010 4:44 AM

Hi! keyur,
Greetings from venkatesh
Sorry for delay, i was busy with some assignments.
Actually, we are consultancy service provider for those organization who needs to Install Oracle RAC server. We provide entire services i.e. from designing to implementation of RAC server, provide solution for load balancing, desaster management and so on.. what i had mention in the earlier post.
Also we offer corporate training to the organization in RAC administration, ASM, Data Guard.
I think this info will get you to understand our services..
we welcome inquires if any from your end.
Regards
Venkatesh
mail: [email protected]

Error during RAC installation

Dear all,
I am having a big issue when installing oracle RAC on windows 2003 service pack 1. during oracle cluster configuration assistants step an error takes place and the installation terminate
the following is the complete log file data.
Using paramFile: E:\10201_clusterware_win32\clusterware\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
E:\10201_clusterware_win32\clusterware\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\temp\OraInstall2009-02-02_06-13-03PM"
The commandline for unzip:
E:\10201_clusterware_win32\clusterware\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\temp\OraInstall2009-02-02_06-13-03PM"
The commandline for unzip:
E:\10201_clusterware_win32\clusterware\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\temp\OraInstall2009-02-02_06-13-03PM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 100.INFO: Environment Variables:
INFO:      ORACLE_HOME =
INFO:      PATH = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
INFO:      CLASSPATH =
INFO: Username:oracle
INFO: Oracle Universal Installer version is 10.2.0.1.0
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO:
*** Welcome Page***
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: E:\10201_clusterware_win32\clusterware\stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.crs, 10.2.0.1.0, >0.0.0.0.0, [ 912 ][OH:1]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Complete'. Received the value from the default settings.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Complete'. Received the value from the default settings.
INFO: The selected install type is "Complete".
INFO: install properties filename: C:\temp\OraInstall2009-02-02_06-13-03PM/oracle.crs_Complete.properties
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'E:\oracle\product\10.2.0\crs'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraCr10g_home'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to 'E:\oracle\product\10.2.0\crs'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom C:\temp\OraInstall2009-02-02_06-13-03PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.crs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_crs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.cfs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_crs_wincfs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.crs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.has.crs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.4.2.8.0' to 'E:\oracle\product\10.2.0\crs\jre\1.4.2'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.ewt_3.4.38.0.0' to 'E:\oracle\product\10.2.0\crs/ewt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.help_4.2.6.1.0' to 'E:\oracle\product\10.2.0\crs/help'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.jewt_4.2.33.0.0' to 'E:\oracle\product\10.2.0\crs/jewt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.share_1.1.18.0.0' to 'E:\oracle\product\10.2.0\crs/oracle_tools_share'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.ice_5.2.3.6.0' to 'E:\oracle\product\10.2.0\crs/ice'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oem.oemlt_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oemlt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.buildtools.common_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_buildtools_common'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.buildtools.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_buildtools_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.dbjava.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.emdw.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.emdw.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.common_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_rsf_has_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_ldap_rsf_cmp'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.network.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.rsf.ic_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.network.rsf.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_nlsrtl_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf.lbuilder_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_nlsrtl_rsf_lbuilder'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ons_10.1.0.3.0' to 'E:\oracle\product\10.2.0\crs/opmn'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oracore.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.oracore.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.perlint_5.8.3.0.2' to 'E:\oracle\product\10.2.0\crs\perl'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.precomp.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_rsf_precomp_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.crs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.rdbms.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf.ic_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.rdbms.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rsf_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.rsf Product Location: Empty path specified.

*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to 'racdbsrv1.bog.gov.sa'. Received the value from the default settings.
INFO: Defaulting prerequisite location to 'E:\10201_clusterware_win32\clusterware\stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.crs_Complete_install
INFO: Starting Prerequisite checks : Mon Feb 02 18:13:28 AST 2009
INFO: Checking CertifiedVersions
     This is a prerequisite condition to test whether the Oracle software is certified on the current O/S.
INFO: Expected result: One of 5.0,5.2
Actual Result: 5.2
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking ServicePackChecks
     This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking TotalMemory
     This is a prerequisite condition to test whether the system has sufficient physical memory.
INFO: Expected result: 256MB
Actual Result: 2047MB
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
     This is a prerequisite condition to check whether the Oracle Home specified by the user already contains an installed product which is incompatible with the product being installed.
INFO: Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleHomeSpace
     This is a prerequisite condition to check whether the specified Oracle Home contains any spaces in the path.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking InstallOnRoot
     This is a prerequisite condition to test whether installation is done at the root of a drive.
INFO: Checking the ORACLE HOME.... :E:\oracle\product\10.2.0\crs
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking Detectnverify92RAC
     This is a prerequisite condition to check whether all the selected nodes are part of the existing Oracle 9.2 RAC.
INFO: hostNameFromIpAddr :racdbsrv1.bog.gov.sa
INFO: hostName :racdbsrv1
INFO: Identifying windows system directory :C:\WINDOWS\system32
INFO: is92Cluster State:false
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking Detectnverfiy10iSI
     This is a prerequisite condition to check if local CSS is shutdown and deconfigured on all the nodes of the cluster.
INFO: hostNameFromIpAddr :racdbsrv1.bog.gov.sa
INFO: hostName :racdbsrv1
INFO: is92Cluster state :false
INFO: Reg Key exists status:false
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking ExistingEnvChecks
     This is a prerequisite condition to ensure that ORACLE_HOME, ORACLE_SID, ORACLE_CRS_HOME variables are not set in the environment.
INFO: Checking Oracle home from the env... :
INFO: Checking Oracle Sid from the env...:
INFO: Checking Oracle CRS home in the env.... :
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Mon Feb 02 18:13:29 AST 2009
INFO: *** Entering Component: oracle.crs installation
INFO: Setting variable 'sl_votedrivelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_vipHosts' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_tableListClone' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_selectedNodes' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_publicNodeNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_pubNodes' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_privatenamelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_privateNodeNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_nodenumberlist' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_hostnames' to ''. Received the value from the variable calculation.
INFO: Calling Query ClusterQueries10.2.0.1.0 PrivIntr
INFO: Query Returned: public 10.10.10.0 PRIVATE 255.255.255.0,Local Area Connection 5 169.254.0.0 UNKNOWN 255.255.0.0,priv1 192.168.0.0 PRIVATE 255.255.255.0,Local Area Connection 4 169.254.0.0 UNKNOWN 255.255.0.0,priv2 192.168.0.0 PRIVATE 255.255.255.0,Local Area Connection 2 169.254.0.0 UNKNOWN 255.255.0.0
INFO: Setting variable 'sl_defaultPrivIntrList' to 'public:10.10.10.0:2:255.255.255.0,Local Area Connection 5:169.254.0.0:1:255.255.0.0,priv1:192.168.0.0:2:255.255.255.0,Local Area Connection 4:169.254.0.0:1:255.255.0.0,priv2:192.168.0.0:2:255.255.255.0,Local Area Connection 2:169.254.0.0:1:255.255.0.0'. Received the value from the variable calculation.
INFO: Setting variable 'sl_VDSKPartitionsOnRAW' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_VDSKDisksOnRAW' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PrivIntrColHeaders' to 'Interface Name,Subnet,Interface Type'. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceVDSK' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceSelectedVDSK' to ',0,0,20'. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceSelectedOCR' to ',0,0,100'. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceOCR' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHPartitionsAndSpace' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHPartitionAndSpaceSelected' to ',0,0,3072'. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHDrives' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_IntrNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_IntrChoices' to 'Public,Private,Do Not Use'. Received the value from the variable calculation.
INFO: Setting variable 'sl_HostList' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_Drives' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DiskNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DiskNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFPartitionsAndSpace' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFPartitionAndSpaceSelected' to ',0,0,3072'. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFDrives' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_ConfigTypes' to 'Oracle Home and Datafiles,Select this configuration if your shared drives has enough space for Oracle software and database datafiles. Choosing this option will place the Oracle Cluster Registry (OCR) and the Cluster Synchronization Services (CSS) voting disk on the same drive as the datafiles.,Oracle Home ONLY,Select this configuration if your shared drive has only enough space for your Oracle software. You will be asked to specify two raw devices later, one for the Oracle Cluster Registry (OCR) and the Cluster Synchronization Services (CSS) voting disk.,Datafiles ONLY,Select this configuration if you want multiple copies of your Oracle software, one per instance.,Neither,Select this configuration if your non-shared drive has only enough space for your Oracle Clusterware software.
You will be asked to specify two raw devices later, one for the Oracle Cluster Registry (OCR) and the Cluster Synchronization Services (CSS) voting disk.'. Received the value from the variable calculation.
INFO: Setting variable 'sl_92NodeNos' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_92NodeList' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_votedsk' to 'votedsk'. Received the value from the variable calculation.
INFO: Setting variable 's_votedisklist' to ''. Received the value from the variable calculation.
INFO: Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.installer.NatLibDir
INFO: Query Returned: C:\temp\OraInstall2009-02-02_06-13-03PM\
INFO: Setting variable 's_tmpDirLocation' to 'C:\temp\OraInstall2009-02-02_06-13-03PM\'. Received the value from the variable calculation.
INFO: Setting variable 's_svrConfigLocFileName' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_storageTypeVdsk' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_storageTypeOcr' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_srvconfig_loc' to 'srvconfig_loc'. Received the value from the variable calculation.
INFO: Setting variable 's_srvcfgMirr' to 'ocrmirrorcfg'. Received the value from the variable calculation.
INFO: Setting variable 's_srvcfg' to 'ocrcfg'. Received the value from the variable calculation.
INFO: Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.installer.silent
INFO: Query Returned: false
INFO: Setting variable 's_silent' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 's_setif' to 'setif -global '. Received the value from the variable calculation.
INFO: Setting variable 's_script3' to 'rootdeinstall.sh'. Received the value from the variable calculation.
INFO: Setting variable 's_script2' to 'rootdelete.sh'. Received the value from the variable calculation.
INFO: Setting variable 's_script1' to 'rootdeletenode.sh'. Received the value from the variable calculation.
INFO: Setting variable 's_responseFile' to 'default'. Received the value from the variable calculation.
INFO: Setting variable 's_rawDeviceName' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_quorum' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_pubNodeNum' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_path' to ''. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 getOSName
INFO: Query Returned: NT_X86
INFO: Setting variable 's_operatingSystem' to 'NT_X86'. Received the value from the variable calculation.
INFO: Setting variable 's_onsnodelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_ocrLocFileName' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_nodevips' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_nodelist' to ''. Received the value from the variable calculation.
INFO: Calling Query LangQueries1.3.6.4 GetNlsLang
INFO: Query Returned: AMERICAN_AMERICA.WE8MSWIN1252
INFO: Setting variable 's_languageid' to ''AMERICAN_AMERICA.WE8MSWIN1252''. Received the value from the variable calculation.
INFO: Calling Query areasQueries10.2.0.1.0 getProductHome
name = oracle.jdk
startVersion = 1.4.1
endVersion = 9.9.9
acceptCompatible = null
INFO: Query Returned: E:\oracle\product\10.2.0\crs\jdk
INFO: Setting variable 's_jreLocation' to 'E:\oracle\product\10.2.0\crs\jdk\jre\'. Received the value from the variable calculation.
INFO: Setting variable 's_hostnamelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_finalIntrList' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_endOfInstallMesg' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_dirPermissions' to '775'. Received the value from the variable calculation.
INFO: Setting variable 's_cvuNodelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_clustername' to 'crs'. Received the value from the variable calculation.
INFO: Setting variable 's_clusterNodes' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_allocationUnitOH' to '4'. Received the value from the variable calculation.
INFO: Setting variable 's_allocationUnitDF' to '1024'. Received the value from the variable calculation.
INFO: Setting variable 's_addFlag' to 'add_config'. Received the value from the variable calculation.
INFO: Setting variable 's_VdskMirrorNotReqd' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberVDSK' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberOCRMirr' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberOCR' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_OHDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_OCRdeviceList' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_JavaFlag' to '-Dsun.java2d.noddraw=true'. Received the value from the variable calculation.
INFO: Setting variable 's_IntrIps' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_InstCrsVer' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberVDSK' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberOCRMirr' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberOCR' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DFMirrorDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DFDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_CfsOcrRoot' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_CfgTypeRet' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_CSS' to 'OracleClusterPreinstService'. Received the value from the variable calculation.
INFO: Setting variable 's_92CFSLocation' to ''. Received the value from the variable calculation.
INFO: Setting variable 'ret_PrivIntrList' to 'NO_VALUE'. Received the value from the variable calculation.
INFO: Setting variable 'n_storageTypeVDSK' to '1'. Received the value from the variable calculation.
INFO: Setting variable 'n_storageTypeOCR' to '1'. Received the value from the variable calculation.
INFO: Setting variable 'n_NTvdskCounter' to '0'. Received the value from the variable calculation.
INFO: Setting variable 'n_Choice' to '0'. Received the value from the variable calculation.
INFO: Setting variable 'b_win92' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_votingdiskfirsttime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_validateOnce' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_removedClusterPreinstService' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_ocrpartitionfirsttime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_launchConfig' to 'true'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 isCurrentPlatformInGroup
platGroup = WINDOWS
INFO: Query Returned: true
INFO: Setting variable 'b_isWindows' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_isVdskRAW' to 'false'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 isCurrentPlatformInGroup
platGroup = UNIX
INFO: Query Returned: false
INFO: Setting variable 'b_isUNIX' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isOCRPrimaryOnRAW' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isOCRMirrorOnRAW' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isNonCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isCluster' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_flag' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_firsttime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_emptyFlag' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_displayWinStorageDlg' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_WinDeinst' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_VipListFirstTime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_VdskRAW' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_VdskCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_Use92Cfs' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_StartedClusterPreinstService' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_StartClusterServiceFirstTime' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_StartClusterPreinstService_retval' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_ServiceRunning' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_ServiceFound' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_PrivNameListFirstTime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_OhOnlyOnCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_OcrRaw' to 'false'. Received the value from the variable calculation.
INFO: Calling Query fileQueries10.1.0.2.0 exists
filename = /var/opt/oracle/srvConfig.loc
INFO: Query Returned: false
INFO: Setting variable 'b_DisplayOcrDialog' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_DebugFlag' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_CssStillRunning' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_CssAlreadyStopped' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'bRAC9_2_exists' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'bRAC10i_exists' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'CLUSTER_CONFIGURATION_FILE' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHPartitionsAndSpace_valueFromDlg' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query WindowsGeneralQueries10.2.0.0.0 getWindowsSystemDirectory
INFO: Query Returned: C:\WINDOWS\system32
INFO: Setting variable 's_windowsSystemDirectory' to 'C:\WINDOWS\system32'. Received the value from the variable calculation.
INFO: Setting variable 's_usergroup' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_policyFile' to '-Djava.security.policy="E:\oracle\product\10.2.0\crs\srvm\admin\srvm.policy"'. Received the value from the variable calculation.
INFO: Setting variable 's_orahomeSwitch' to '-orahomeE:\oracle\product\10.2.0\crs'. Received the value from the variable calculation.
INFO: Setting variable 's_jreBin' to 'E:\oracle\product\10.2.0\crs\jdk\jre\\bin'. Received the value from the variable calculation.
INFO: Setting variable 's_hostname' to 'racdbsrv1.bog.gov.sa'. Received the value from the variable calculation.
INFO: Setting variable 's_WinDeinst' to 'del -nn '. Received the value from the variable calculation.
INFO: Calling Query areasQueries10.2.0.1.0 productInstalled
location = E:\oracle\product\10.2.0\crs
name = oracle.crs
startVersion = 10.1.0.0.0
endVersion = 99.9.9.9.9
acceptCompatible = false
INFO: Query Returned: false
INFO: Setting variable 'b_isUpgrade' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isShared' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_isLinux' to 'false'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getHostIPAddress
INFO: Query Returned: 10.10.10.31
INFO: Calling Query netQueries10.2.0.1.0 getHostNameForIPAddress
ipAddress = 10.10.10.31
INFO: Query Returned: racdbsrv1.bog.gov.sa
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query ClusterQueries10.2.0.1.0 getClusterState
nodeName = racdbsrv1
INFO: Query Returned: 0
INFO: Setting variable 'b_CoExist' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'OwnerId' to 'Administrator'. Received the value from the variable calculation.
INFO: Setting variable 'ORA_CRS_HOME' to 'E:\oracle\product\10.2.0\crs'. Received the value from the variable calculation.
INFO: Setting variable 's_windowsCommandLine' to 'C:\WINDOWS\system32\cmd /c call '. Received the value from the variable calculation.
INFO: Setting variable 's_vipcaClasspath' to '";E:\oracle\product\10.2.0\crs\jlib\srvm.jar;E:\oracle\product\10.2.0\crs\jlib\srvmhas.jar;E:\oracle\product\10.2.0\crs\srvm\jlib\vipca.jar;E:\oracle\product\10.2.0\crs\jlib\ewt3.jar;E:\oracle\product\10.2.0\crs\jlib\jewt4.jar;E:\oracle\product\10.2.0\crs\jlib\share.jar;E:\oracle\product\10.2.0\crs\jlib\oracle_ice.jar;E:\oracle\product\10.2.0\crs\jlib\oemlt-10_1_0.jar"'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 getenv
name = TMPDIR
INFO: Query Returned:
INFO: Calling Query generalQueries10.1.0.3.0 getenv
name = TEMPDIR
INFO: Query Returned:
INFO: Calling Query generalQueries10.1.0.3.0 getenv
name = TEMP
INFO: Query Returned: C:\temp
INFO: Setting variable 's_tmpDir' to 'C:\temp'. Received the value from the variable calculation.
INFO: Setting variable 's_cvuClassPath' to '"E:\oracle\product\10.2.0\crs\jlib\srvm.jar;E:\oracle\product\10.2.0\crs\jlib\cvu.jar;E:\oracle\product\10.2.0\crs\jdk\jre\lib\rt.jar"'. Received the value from the variable calculation.
INFO: Setting variable 'b_launchVIPCA' to 'true'. Received the value from the variable calculation.
INFO: Calling Query ClusterQueries10.2.0.1.0 IsItVendor
INFO: Query Returned: false
INFO: Setting variable 'b_isVendor' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'sl_tableList' to 'NULL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName =
INFO: Query Returned:
INFO: Calling Query netQueries10.2.0.1.0 getIPAddressForHostName
hostName =
INFO: Query Returned: 127.0.0.1
INFO: Calling Query netQueries10.2.0.1.0 getHostNameForIPAddress
ipAddress = 127.0.0.1
INFO:
Query Exception: UnknownHostException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
INFO: Error getting hostname for the given IP address.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = Error getting hostname for the given IP address.
INFO: Query Returned:
INFO: Setting variable 'sl_nodeNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_OcrVdskMirror1RetVal' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_ocrpartitionlocation' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_ocrMirrorLocation' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_votingdisklocation' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_VdskMirror2RetVal' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query ClusterQueries10.2.0.1.0 getClusterState
nodeName = racdbsrv1
INFO: Query Returned: 0
INFO: Setting variable 'sl_HostList' to 'racdbsrv1.bog.gov.sa'. Received the value from a code block.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Calling Query ClusterQueries10.2.0.1.0 PrivNodeName
nodeName = racdbsrv1.bog.gov.sa
PathName = E:\oracle\product\10.2.0\crs
INFO: Query Returned:
INFO: Setting variable 'sl_HostList' to 'racdbsrv1.bog.gov.sa,racdbsrv1-priv.bog.gov.sa'. Received the value from a code block.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Setting variable 'sl_HostList' to 'racdbsrv1.bog.gov.sa,racdbsrv1-priv.bog.gov.sa,racdbsrv1-vip.bog.gov.sa'. Received the value from a code block.
INFO: Calling Query ClusterQueries10.2.0.1.0 getCssInfo

10g RAC installation fails....

Hello All,
I am new to RAC installation.while doing the installation in 2node cluster,till the configuration assisstants windows everything went fine. in CA while checking the status,the oracle clusterware config assistant failed with the following log....
INFO: Starting Install on nodes 'server004'
INFO: Saving Cluster Inventory
INFO: Running command 'C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 -paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=server003,server004 CRS=true "INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory" LOCAL_NODE=server004 -remoteInvocation -invokingNodeName server003 -logFilePath "C:\Program Files\Oracle\Inventory/logs" -timestamp 2010-05-18_11-41-42AM' on the nodes 'server004'.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Creating service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Starting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Stopping service OracleOUIOraCr10g_homeService on nodes server004.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools5
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Clusterware current size: 1
INFO: No of ExitOnly Tools in this session: 0
INFO: cf session for perform has hashcode: 1040982
INFO: detached tool list getting prepared fo comp: Oracle Clusterware
INFO: cfsession hashcode for exit only tools: 1040982
INFO: hashcode for action: 17596838
INFO: No of ExitOnly Tools: 0
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1073741819)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Have 1GB RAM in both the nodes.
could any one help me to solve this?
Thanks,
Derick
Edited by: user4487322 on May 18, 2010 1:46 AM

Thank you madrid.I am installing the RAC in windows2003 sp2 server.in the link till the step no#12(12. The Configuration Assistants page appears.)everything went
fine.while checking the 'Virtual Private IP Configuration Assistant',the installation fails with following error.....
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/racgons.exe add_config server003:6200 server004:6200
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "Local Area Connection"/10.28.25.0:public "Local Area Connection 2"/10.10.10.0:cluster_interconnect
INFO: Configuration assistant "Oracle Private Interconnect Configuration Assistant" succeeded
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
I am able tp ping all my IP's from both the nodes,with host name &alias specified in the host file.
any thing else to be checked to fix "Virtual Private IP Configuration Assistant"?Any help?

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Oracle 11gr2 RAC installation

Hi Gurus,
In new project we have proposed to have 2 nodes single site RAC database Oracle 11gR2 64 Bit . We are going to have OEL 5.4 64 Bit Linux as OS and IBM as machine .
We are migrating standalone 10g R2 database to 11r2 Rac and from HP-UX to OEL Linux . We are migrating from different datacenter .
What would be the pfile configuration (i mean memory size doubles ) in RAC ?
We are going to use IBM storage . Need light on followings . Pls help me out
1>Requirements for installation
2>Grid installation requirements
3>ASM instance is physical database instance or just service ?
4>Any oracle document for installation of 11gR2 Grid and RAC?
If you provide me authorized links of RAC installation that would be better .
Thanks & Regards

1>Requirements for installation
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10840/toc.htm
2>Grid installation requirements
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10812/toc.htm
3>ASM instance is physical database instance or just service ?
Resp.: ASM is a database instance (i.e. just the memory structures, no physical files). See this link:
4>Any oracle document for installation of 11gR2 Grid and RAC?
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10813/toc.htm (RAC), the GI is in item 2 above.
Always check the documentation site 1st: http://www.oracle.com/pls/db112/homepage

Sources for G3 Ibook Hardware test and Installation Disks

Greetings All!
Subject says it all. I bought my 14" 900mHz G3 iBook with insurance off eBay last Feb and it's been working just great (just know how to handle it like a baby!). Since it came without the Hardware test and installation CDs in case of emergency, what source options do I have?
Thanks!
James Greenidge

You may want to try _calling Apple_ to see if they have the CD's available. If they do, they will send them to you (for a fee).

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Best practice of 11G release 2 Grid & RAC installation on Solaris 10

Hi Experts,
Please share 11g Release 2 Grid infrastructure and RAC installation experiennce on Sun SPARC.
Appreciate if you can provide documentation which provde complete information from server setup to database setup(other than oracle documentaion)
Also please let me know which is the best storage option( NFS , ASM,...) and pros and cons
Regards,
Rasin M

Hi,
Appreciate if you can provide documentation which provde complete information from server setup to database setup(other than oracle documentaion)Check this in MOS:
RAC Assurance Support Team: RAC Starter Kit and Best Practices (Solaris)
https://support.oracle.com/CSP/main/article?cmd=show&id=811280.1&type=NOT
Regards,
Levi Pereira
http://levipereira.wordpress.com

Steps For Oracle10gR2 RAC installation on windows 2003 enteprise edition

can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN

Hi,
Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
Check: System architecture
Node Name Available Required Comment
rac11 unknown 32-bit failed
rac22 unknown 32-bit failed
Result: System architecture check failed.
Can anyone throw more light to resolve this issue.
Note that i have successfully does this on Windows 2003.
Any help will be highly appreciable.
Thanks
Nilanjan

10gR2 SE RAC installation on Windows 2003

Hello,
I want to install RAC on two nodes with Windows 2003 operating system.
I have the following questions:
Do I need Windows Clustering Software installed before I go for RAC clusterware installation?
If not, how do I setup shared drive so that both systems can see and access OCR and voting disks?
Is there any good documentation for RAC installation on Windows platform?
Thanks
J

Hi,
Do I need Windows Clustering Software installed before I go for RAC clusterware installation? No, you dont need any Windows clustering software for implement Oracle RAC.
If not, how do I setup shared drive so that both systems can see and access OCR and voting disks?You need install the clusterware pre-requisites before install the Oracle Clusterware, you must see the next documentation. There explain how configure the shared disk and other pre-requisites for Clusterware, for example raw devices and other settings.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14207/storage.htm#sthref244
Is there any good documentation for RAC installation on Windows platform?Yea, there is a good documentation for RAC Installation on Windows, look the next URL for more information.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm
Luck.
Have a good day.
Regards.

Problems with RAC installation with Windows 2000 Advanced Server

Hello,
I've two servers in cluster mode with W2K Advanced Server, and a RAID-5 array of 4 disks shared by both of them. My problem is that I've installed The Cluster Service of Windows in order to have an active/passive configuration of my servers, because I have a common directory structure that is accessed by the PC's of the LAN.
By another hand, I want to install Oracle Real Application Cluster to manage my Oracle database but after create the extended partition and the logical drives when I execute the file \preinstallation_rac\clustersetup\clustersetup.exe to create the cluster, when I select the option Create a cluster the following error message appears me:
"Any disk Oracle partition has been found. Stop this wizard, create an Oracle partition and try it
again."
I'd like to know if it's possible to have the Service Cluster of Windows 2k and the Oracle clusterware?¿ Altough before begining the installation I've stopped my Cluster Service as documentation suggests. If somebody knows what it's happening to me I'd be really very grateful.
Thanks in advance,
Isabel

Hello Joel,
I've already read all documentation provided by Oracle about Real Application Clusters
and I've not found anything to solve my problem. Certainly I want to use OCFS but when I
try to execute preinstall_rac\clustersetup.exe to install CFS the error appear and I can't
continue with RAC installation.
Besides I've tried command "lsnodes -v" and got :
Could not load CM.dll
Could not initialize cluster
And when I've tried to run "clustercheck" I've got :
** Copy File: Create Directory failed - Error 183
** Directory = \\192.168.1.111\Cy$\Temp\opsm
Created directory \\192.168.1.112\Cy$\Temp\opsm
Could not copy file to other nodes [error = 183]
I've read metalink Note 186130.1 Clustercheck Fails with Windows Error 183 and the only
proof I haven't done is get the clustercheck.exe release1(9.0.1).
Any suggestion will be very appreciated.Thanks,
Isabel

Testing RAC installation

Similar Messages

Maybe you are looking for