Testing the 4110 in Cal Exec 3.6

We are trying to get rid of our XP computers so upgraded Cal Exec from 3.4.1 at the same time.  The new 4110 test has 4 added sections.  There is no README file so I am stumbling through.  First, I discovered that it really wants you to use the their PXI-4071 DMM.  Next,  I was able to step through and find that there are 10 new resistive loads I will need to complete the Load Regulation tests.  However, it chokes on Line Regulation.  At this point, it starts calling for an adjustable supply instead of the APS-4100 external supply that was used for all tests up to this point.  Of course, there is nothing to tell what supply it wants me to use.  Does anyone use this?  Can you fill me in on what additional resources are required?
Thanks,
George

We just upgraded from 3.4.1 on an XP machine to 3.6 on a Win7 machine.  After I posted my question, I was given a link with all kinds of useful information.  It does not list the load values or show any connections, but it does list recommended equipment.  Great link: http://digital.ni.com/manuals.nsf/websearch/2742A60E930DE92186257CED0077EBB7
 

Similar Messages

  • How do the limits in cal exec for vertical sensitivity of a 5911 relate to the vertical sensitivity spec (noise referred to input) in the 5911 user manual?

    One of our 5911's came back from calibration and it failed 'Vertical Sensitivity" at...
    Range = 20V
    Sample Rate = 2.5MS/s
    Reading: 145.119 dBfs/sqrt(Hz)
    High Limit: 152.000 dBfs/sqrt(Hz)
    and...
    Range = 0.2V
    Sample Rate = 1MS/s
    Reading: 113.859 dBfs/sqrt(Hz)
    High Limit: 128 dBfs/sqrt(Hz)
    How do these limits relate to the "Vertical Sensitivity" (Input Ranges) on page A-3 on the NI PCI-5911 User Manual?  http://www.ni.com/pdf/manuals/322150e.pdf  For 20V the user manual spec is 174 dBfs/sqrt(Hz) and for 0.2V is  the same 128 dBfs/sqrt(Hz).  
    How might this impact previous error calculations?
    Thanks,
    Darrow

    Hi Darrow,
    First I will link to the Manual Calibration Procedure and Specifications for this board for reference.
    There are a couple of sources of noise on this module that need to be taken into account. One shown in the vertical sensitivity table which you have already referenced.  This is amplifier noise density which is dependent on gain settings.  The second is ADC noise density.  This is dependent on sampling rate.  These values can be found in the Dynamic Range section of the Specifications.
    The two noise sources are uncorrelated, and depending on your combination of sample rate and range, one will typically dominate and can be used as an estimate.  Otherwise you can obtain the RMS total through the root sum of squares method.  This total is what is used in the calibration tests.
    There is a VI that has been set up for calculating the noise-floor of the 5911.  You can find it here if you wish to see an illustration of the calculation (check out the block diagram).
    If your module is failing calibration for any reason, you cannot rely on it meeting the accuracy specifications. This specific type of failure will impact the dynamic range/noise floor of the board.  Likely tens of dB that you have lost given the measurements you report.  Small signal measurements will definitely be affected.  I recommend repair or replacement to ensure the quality of future measurements.
    Jennifer O.

  • Are we Beta testing the N97 for Nokia?

    Because if i was given this as a beta release i would have told them what i thought, the current launch version on the N97 with V10 firmware is barely an Alpha release, this phone was a rush job thrown out on the market to coincide with the launch of the iphone 3Gs.
    This is my fourth N series, N80, N95, N95 8gb (the best N series yet), and now this N97 what should be Nokia's flagship, but being stripped of apps and filled with Trial versions to please the accountants at Nokia.
    Day one and it locked up twice, corrupted my contacts when synced with OVI, and ran down to less than 4mb on the C drive, day 2 i found the GPS was not working, it was a joke, walking down the road under a clear sky and it could not hold a signal lock, driving was worse barely holding a signal for a few seconds and as for sitting spinning it round for an age to get the compass to work........forget it id rather be lost than look like a **bleep**.
    Deleting apps and reinstalling them on the mass memory frees up some space, but why should we have to do this, the whole phone is badly thought out and configured.
    Soon after the stylus supplied with the phone and attached to the phones only tie point scratched my screen, what was wrong with a rear cover with a bump and a thin PDA style stylus, no not good enough for Nokia, a fat thing on a string will do for them. 
    New Firmware release 4 days after UK launch and still not available to most users as it has not been network approved yet, 3 network say its Nokia's job and they are delaying things, Nokia say its the networks delay. Come on if it was needed that quickly why leave most of your customers waiting, or just get to work on a layered OS with a standardised core with a network layer, so everyone can have the updated without waiting.   
    4 weeks in on this phone, i too have the scratched camera lens, still No working GPS, and having some good negotiations with Three to try to reverse the contact upgrade, as i don't think another N97 will last any longer than this one.
    I see Nokia spending Millions on punting the N97, TV, Billboards, Net adds, why push so hard on what is a sub standard product, could you imagine Joe public trying to free off some memory by moving apps, tell the care centres to brace themselves the N97 flood will be coming their way.
    What next, well if 3 don't cancel the upgrade, then Nokia will have to fix my phone again and again and again untill it works as advertised, in the mean time i am off to get in touch with watchdog so they can let Joe Public know what to expect from an N97.
    Rob 
    Solved!
    Go to Solution.

    I don't believe we're beta testing the N97 for Nokia. Beta testing suggests it is in a state prior to production. Nokia's track record (at least to me) seems that leading edge phones never reach a stable plateau.
    What I believe happens is the phone is released and remains unstable until they sort of perfect the platform, then a new handset is released bringing a whole new world of bugs and problems and so the cycle continues.
    By the time the phone is suitable for every day use it is, by today's technological stance, ancient and the damage has already been done to the reputation.
    S40 phones seem to fare much better, mainly because it is much more widely used within Nokia. S60 is up against some fine competition from vendors who will rush fixes out.. Nokia only ever seems to rush phones out. It isn't the same and it shows (see their forcast for the next 6 months)
    I honestly would not be surprised if this flagship phone limps on in a partially functional state until it is superceeded by a budget blackberry clone.
    Sad? Very! Am I being cynical, or telling it like it is.
    I'd be real interested to know if any exec at Nokia used the N97 in the weeks before it was released.. Not that I'm a fan, but we all know Stevie J used an iphone long before it was released.. I kind of get the impression they must all use very basic "corporate" s40 handsets and assume their flagship product must be of the same calibre.
    Next release, why not give 100 people N97 for testing, real testing.  It seems Nokias quality assurance team is out of touch with what a $700 handset demands.. ooooh, I gasp in awe at your 30 MB of free capactity when you remove ALL the applications you can. (It's like having a 2TB hard drive in a computer and continuing to boot from a floppy)
    I appreciate there are product time lines to meet, but if Nokia were aiming to compete with the likes of the pre, iphone and the various android handsets (not even mentioning windows mobile) rushing out a phone like this was very wide of the mark. Concept wise, the N97 is a great design.. the implementation of both the hardware and software just isn't going to cut it in todays market.. 
    (but this is what they want? you'll get bored with the handset and buy a replacement! yeay!)

  • Calibrating a 6552 using Cal Exec.

    I am trying to calibrate a 6552 card.
    What does Cal Exec mean when its asking me to "Select the switch device strings" "SCXI slot 0" and "SCXI slot 1"?
    I have never seen this before?

    Hi,
    The "Switch in SCXI Slot 0" and "Switch in SCXI Slot 1" string entries show up in Calibration Executive's DUT Selection configuration window when NI 6551/6552 cards are being calibrated. They expect a string in the DAQmx format (e.g. dev0) and it should be the Device ID of the Switch. 
    NI SCXI-1193 cards are needed for this calibration setup.
    More information can be found on the help file of the Calibration Executive under "Calibration Executive Help - Device Calibration Procedures - Modular Instruments - HighSpeed Digital - NI 6551/6552 Calibration Procedure"
    Best Regards,
    Mark N
    Applications Engineer
    National Instruments UK & Ireland

  • Error while testing the endpoints in Service Registry

    Hi,
    I am getting the following error while testing the endpoint in the Service Registry
    Invalid Response Code: (404) Not Found. The request URL was:"http://<server>:8000/sap/bc/srt/wsdl/bndg_DD73518A3AD471F18558001D0910D3CA/wsdl11/binding/ws_policy/document?sap-client=800". Check, whether the URL is correct, and the Web Service that you are requesting is up and running.
    I have created an Enterprise Service at the backend and have published to the Service Registry of the CE server , but while testing the endpoint in service registry i am getting error.
    Can any one please help me to solve this issue.
    Thanks & Regards,
    Hamsa Shree

    Hi hamsa,
    Have you tested the service? If It works, maybe there's something wrong with your destination configuration.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/705459a3-bf1c-2b10-8a9d-d300ada5f0fc
    You may find a solution in the above article.
    Good luck!
    Wenhao

  • Can not test the web service in JDeveloper.

    Hi there...
    I created an AppModule, added two custom methods, and generated a webservice for that. When I want to test the webservice I get the error "The Webservice Tester cannot be invoked because the WSDL document of the selected service cannot be read."
    If I right the webservice and select run, I can view the web page to invoke the methods, However I am wondering why I can't test the service inside the developer.
    The settings of my system are as follows:
    OS: windows 7 64bit
    JDeveloper: Studio Edition Version 11.1.1.3.0 , Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
    I did not install any update for JDeveloper...
    So if anyone is having an idea what this problem is let me know.
    thanks .

    It seems that even if the test web service option does not work and i get the error, it is possible to run the web service, and then by clicking on the link in the log the tester in jdeveloper appears.
    Don't know the reason for such strange behavior.

  • Is there a method I can use to test the space cost of a Java program?

    I am trying to test the space cost of a Java program (or a few lines of executed codes), however...
    Firstly I tried to use the method freeMemory() in runtime class at start and end of a number of lines tested on, and then find the differences between them. But because I don't know when JVM releases memories, this idea seems not working.
    I also tries to use the -verbose:gc to print the GC actions, which is also hard to be automatically collected (Computing the results one by one by hand is too burdensome).
    Is there a method in some classes can be used for doing this? Could anyone help me on this, please?

    Up _+ ...                                                                                                                                                                                                                                                       

  • How Can I Test The Health of my Mac?

    Hello, I have a Mid-2012 13 inch MacBook Pro with 2.5 GHz, and an Intel Core i5 processor. I got this Mac about 14 months ago for Grade 8 high school work purposes (I'm in a special Digital Immersion program where all work is done on Macs). My Mac's performance and speed while using OS X has started to decline over the past few months, in a slow and gradual manner. I am not sure if this is something that I should be worried of, or not. I have 186 GB free from my 400 GB Mac OS X Mavericks partition, and 54 GB free out of 100 in my Windows partition. I use my Mac quite heavily for things like video editing with Final Cut Pro, photo editing with Photoshop, word processing, surfing the web, and the occasional game on Steam. I want to test the health of my computer to ensure it is okay. I used a Geekbench test and found with a single core my score is 2576, and with multi core 5177. The closest model I have found to mine is a Mid 2012 13 inch Macbook Pro, but with Intel core i7 instead of my i5, and this model on average scored about 2900. My hard drive in the past has failed which about 8 months ago required a wipe and reinstall of OS X. So, do I have anything to worry about? And what are some alternative methods to check the health of my Mac

    EtreCheck version: 1.9.15 (52)
    Report generated September 16, 2014 at 4:59:11 PM PDT
    Hardware Information: ?
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 4000 - VRAM: 1024 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.2 (13C64) - Uptime: 3 days 21:25:16
    Disk Information: ?
      APPLE HDD ST500LM012 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 399.25 GB (186.49 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 100 GB (54.19 GB free)
      HL-DT-ST DVDRW  GS41N 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Configuration files: ?
      /etc/hosts - Count: 20
    Gatekeeper: ?
      Anywhere
    Kernel Extensions: ?
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
      [loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) Support
      [loaded] com.logmein.hamachi (1.0) Support
      [not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.SwitchBoard.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.logmein.hamachi.plist Support
      [running] com.memeo.WDMemeod.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.surfeasy.ShieldService.plist Support
      [loaded] com.teamviewer.Helper.plist Support
      [failed] com.teamviewer.teamviewer_service.plist Support
      [not loaded] org.eyebeam.SelfControl.plist Support
      [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    Launch Agents: ?
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.adobe.AdobeCreativeCloud.plist Support
      [loaded] com.avast.userinit.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [failed] com.logmein.hamachimb.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [failed] com.teamviewer.teamviewer.plist Support
      [failed] com.teamviewer.teamviewer_desktop.plist Support
      [loaded] org.macosforge.xquartz.startx.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [failed] com.adobe.ARM.[...].plist Support
      [loaded] com.avast.home.userinit.plist Support
      [not loaded] com.spotify.webhelper.plist Support
      [loaded] com.valvesoftware.steamclean.plist Support
      [failed] com.Wondershare.TunesGoWatchDemo.plist Support
      [running] ws.agile.1PasswordAgent.plist Support
    User Login Items: ?
      uHD-Agent
      Bartender
      MyDriveConnect
      iTunesHelper
      VMware Fusion Start Menu
      SurfEasy VPN
      Inklet
    Internet Plug-ins: ?
      JavaAppletPlugin: Version: Java 8 Update 20 Check version
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      Default Browser: Version: 537 - SDK 10.9
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      SharePointBrowserPlugin: Version: 14.1.0 Support
      AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
      DirectorShockwave: Version: 12.1.1r151 - SDK 10.6 Support
    Safari Extensions: ?
      wrc
      Searchme-2
      Amazon Shopping Assistant
      Ebay Shopping Assistant
      Slick Savings
      AdBlock
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins ?
      BlueStacks Install Detector: Version: Unknown
      Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes: ?
      Flash Player  Support
      Java  Support
    Time Machine: ?
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 371.83 GB Disk used: 198.15 GB
      Destinations:
      My Passport- Harman [Local] (Last used)
      Total size: 931.16 GB
      Total number of backups: (null)
      Size of backup disk: Adequate
      Backup size 931.16 GB > (Disk used 198.15 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          4% WindowServer
          4% CalendarAgent
          3% hidd
          1% PluginProcess
          1% Creative Cloud
    Top Processes by Memory: ?
      238 MB Safari
      217 MB com.apple.WebKit.WebContent
      78 MB installd
      66 MB com.apple.WebKit.Networking
      57 MB softwareupdated
    Virtual Memory Information: ?
      632 MB Free RAM
      1.67 GB Active RAM
      496 MB Inactive RAM
      715 MB Wired RAM
      2.77 GB Page-ins
      177 MB Page-outs

  • How can you test the video card?

    I just got a cinema display and I am having trouble calibrating it.
    I just notice that when I open up bridge CS4 it takes awhile for it to refresh. When I go to film strip view and click on a picture it will not diplay it.
    Then I change views and there is a line down the middle of the display where it gets update but the left side does not.
    Any thoughts on what it could be?
    Video card of is it the monitor?
    How can I test it?

    The only ways I can think of to test the card are XBench and the Apple Hardware Tests (insert Install DVD and restart while holding down 'd')

  • Is there an easy way to run an Ajax function from input type=file to test the file name in DB?

    I've had the <input type="file">  ... <cffile ...> thing going for a few years now. 
    There is a database where the uploaded file names are stored once the files are uploaded to the server.  It sees things in terms of problems and stores uploaded file name accordingly with the ProbID prepended onto the file name; e.g., MyPicture.jpg would end up in the designated directory and databawe as P416_MyPicture.jpg.  This allows user to store pictures with the same name in different problems without a conflict.  There has been an issue with certain characters (e.g., spaces, +, #, etc.) causing problems when they are in file names so we have come up with a way using the <cffile ... rename> to replace these chars with _.  This means that MyPic+.jpg would end up being P416_MyPic_.jpg. 
         This is where the problem appears.  If someone were to upload MyPic+.jpg after someone else uploaded MyPic_.jpg in the same problem, then the + file would overwrite the _ file before the system knew they had a problem.  And there is now way to restore the original file without going to the system backup and doing so – which is a whole other story … especially, if the person doesn’t tell anyone.
         The logical solution would be to be able to test the new final file name (the name after making the substitutions mentioned above) against the existing files in the database before you went from the page where the <input type=file> control to the associated _action.cfm page where the <cffile> object is located.  Given that this seems to be the province of Ajax, this would seem like a natural use of the really interesting technology.  I have can determine the file name from the onChange action on the <input type=File> so that this would be the place for Ajax to come to the rescue by looking up the final file name and then letting the user know whether the resultant name is a unique within the database or not.  If so, I'll just enable the Add button which sets right next to the <input > control and let them upload it.  If not, I'll put up an error message telling them that this file already exists in the system.
         This would be the perfect solution.  It would let me do some Ajax stuff like I've wanted to do for the past year, but never have had the time to do because this is the project that won't go away.  This is, in fact, the last thing of any consequence that remains to do on this 2-1/2 year nightmare – be careful what you wish for.  If I can get this done this week, then maybe I can finally take a weekend off … maybe it will finally come to an end.
         Which finally leads to my question:  I'm looking for some tips on how to get this thing going since I can barely spell Ajax.  I've got a book and looked at some stuff online about CF and Ajax, but a good example or two or three would be worth a day's worth of poking around on the web and in my books.
         Thanks in advance for any suggestions, ideas, help, whatever.
    Len

    Adam,
         Thank you for your suggestion, but, after spending the night working with Ben Forta's CF8, vol 2, Chap 34, working with <cfajaxproxy>, I was able to do exactly what I wanted and it appears, after some testing, to work exactly as I had envisoned it should. 
         I am now calling a JavaScript function (testFileName) from the onChage event on the <input type="file"> or Browse button, which calls my proxy.cfc that contains the server side of the equation.  This funciton testFileName (I've run out of cleaver function/file names).  The query contained therein hits the database to see if the passed in parameters can pull up an existing file.  If they do, the particulars (file name, data attahced, etc.) are returned to the JavaScipt procedure that puts up the error notice.  The user can then chose to either overwrite the file or quit.  Quiting leaves the your on the Attachment PopUp where he/she started with nothing being uploaded. 
         Thanks again for your suggestion.  I appreciate your taking the time to do so.
    Len

  • Error when I run report RSCMST to test the content server.

    when I run report "RSCMST" to test the my content server.    I get the error:
    header        HTTP/1.1 401 Authorization Required
                  date: Fri, 05 Dec 2008 20:20:45 GMT
                  server: Apache/1.3.41 (Unix) SAPCS/640
                  x-servertime: 20:20:45
                  x-query: create&pVersion=0046&contRep=ZTEST001&docId=020D3949CA03445AE10000000A14022B&compId=data&docPro ..
                  t=rud&accessMode=c&authId=CN%3DCPJ&expiration=20081205142027&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYC
                  x-serverdate: 2008-12-05
                  x-pversion: 0046
                  x-errordescription: URI signature has expired
                  x-serverid: server="content01.ivo.com.cn";serverPort="1090"
                  x-servertype: SAP HTTP Content Server
                  content-length: 752
                  connection: close
                  content-type: text/plain
                  ~remote_addr:
                  ~uri_scheme_expanded: NONE
    want                 201
    bad           401
    time              17.974
    It seems that the "bad 401" means a http error.    I do not know how to configure it ?
    my content server uses the maxdb,  and http is apache, they are all running on redhat linux ese 5
    who can give me some advices?  thanks

    Victor,
            Looks like a web server authentication issue. I suggest you raise this issue in a basis/ web application server forum,
    Sojan

  • Getting error when testing the webservice in webservice navigator

    hello experts,
    i created the rfc for to delete the calender appointments it was working fine and i created the webservice for this . when i'm trying to test the webservice  with ws navigator  i can insert the values on request screen , but result is this error.
    webservice response :  
    HTTP/1.1 200 OK
    Set-Cookie: <value is hidden>
    content-type: text/xml; charset=utf-8
    content-length: 481
    sap-srt_id: 20110721/115816/v1.00_final_6.40/D40C9E37E8642547AA79FB54A42976E7
    server: SAP Web Application Server (1.0;700)
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><n0:YAPPT_DELETE_N_T2Response xmlns:n0="urn:sap-com:document:sap:rfc:functions"><ERROR_MSG><MSG_ID>BC</MSG_ID><MSG_TYPE>E</MSG_TYPE><MSG_NUMBER>020</MSG_NUMBER><MSG_VAR1>D</MSG_VAR1><MSG_VAR2></MSG_VAR2><MSG_VAR3></MSG_VAR3><MSG_VAR4></MSG_VAR4><FIELDNAME>MAINT_INDI</FIELDNAME><TABLEINDEX>000001</TABLEINDEX></ERROR_MSG></n0:YAPPT_DELETE_N_T2Response></soap-env:Body></soap-env:Envelope>
    can anybody guide me how to rectify this problem .help will be greately appreciated.
    thanks for coming help
    regards,
    sashi.

    hello madhu,
    i have got the sollution. in the webservice i'm giving the input (03D86AFB7EE7D14585EF515C59B5F559) same as in data base .while testing the webservice  internally the value should be converted into bytes bcoz  in the domain  the data type was RAW .
    so db didnt recognise that value thats why i got the error.
    so i use the fm  GUID_CONVERT and convert that as db format
    thanks for ur response .
    regards,
    sashi.

  • Error while testing the Webservice

    HI,
    When I Tried the Same It is showing an Error"Error in Sending the Soap Data"
    When i teted the configuration it is showing an error in message interface,but is there and running fine when tested
    Hi,
    When I am Testing the same in the Altova,I am Getting an error as Below
    "<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    <SOAP:Body>
    <SOAP:Fault>
    <faultcode>SOAP:Server</faultcode>
    <faultstring>System Error</faultstring>
    <detail>
    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
    <context/>
    <code>RCVR_DETERMINATION.MESSAGE_INCOMPLETE</code>
    <text>Message is incomplete. No Sender found</text>
    </s:SystemError>
    </detail>
    </SOAP:Fault>
    </SOAP:Body>
    </SOAP:Envelope>
    I Configured all the Required in Id and Tested the Design in the IR.
    Thanks,
    Srinivasa

    Hi Srinivas,
    Check these threads..
    RCVR_DETERMINATION: MESSAGE_INCOMPLETE
    BPM Message is incomplete. No Sender found
    cheers,
    Prashanth
    P.S Please mark helpful answers

  • Error while testing the webservice through SOAMANAGER

    Hi All,
    I have created a webservice from a Function module ( RFC enabled). I am getting an error while testing the webservice from the SOAMANAGER but the function module is working fine giving proper output.
    The error is
    REQUEST:
    POST /sap/bc/srt/rfc/sap/zws_test_cms_bp_fac/600/zws_test_cms_bp_fac/zws_test_cms_bp_fac HTTP/1.1
    Host: ed1app.corp.fcc.ca:49000
    Content-Type: text/xml; charset=UTF-8
    Connection: close
    Authorization: <value is hidden>
    Content-Length: 654
    SOAPAction: ""
    <?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap/features/session/"><enableSession>true</enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:ZSRAV_TEST_CMS_BP_FAC xmlns:ns1='urn:sap-com:document:sap:rfc:functions'><IT_BP_LIST><item><BP_NUMBER>9999990013</BP_NUMBER></item></IT_BP_LIST><IV_COMPANY_CODE>FCC</IV_COMPANY_CODE></ns1:ZSRAV_TEST_CMS_BP_FAC></SOAP-ENV:Body></SOAP-ENV:Envelope>
    RESPONSE:
    HTTP/1.1 500 CX_ST_REF_ACCESS:XSLT exception.An error occurred during serialization in the simple transformation program /1BCDWB/WSSE2B50F3FDFC9C2A94B7.Access to the table ref. node 'ZSCMS_FAC_CAG_DETAILS' outside a loop
    Set-Cookie: <value is hidden>
    content-type: text/xml; charset=utf-8
    content-length: 0
    accept: text/xml
    sap-srt_id: 20100202/041112/v1.00_final_6.40/4B67E41A4BC41B7CE10000000A013104
    server: SAP Web Application Server (1.0;700)
    please do the needful.
    Thanks in advance

    Hi,
    Here is a very smart tool for webservice test:
    [soapUI|http://www.soapui.org/]
    It works fine for me!
    bg,
    attila

  • Error while testing the Service Provider

    Hi All,
    I have developed a WebService model for Purchase Requisition scenario and followed all the steps of the Duet Developer Guide up to creating the SCL Business Object.
    While testing the service on SAP side, when I execute the server proxy and in XML editor I passed the inpur values
    Release Group :B1
    Release Code : A1  for bapi    BAPI_REQUISITION_GETITEMSREL,
    Got the errors as below:
    - <n0:StandardMessageFault xmlns:n0="http://myDuet.com/xi/PR">
    - <standard>
      <faultText>Proxy Class (generated)</faultText>
    - <faultDetail>
      <severity>error</severity>
      <text>Non-Retriable Exception with message: The SAP system could not process your request. Contact your administrator</text>
      <id>110(/IWFND/CM_COS)</id>
      </faultDetail>
    - <faultDetail>
      <severity>error</severity>
      <text>0 GSI implementations for Object Type 'ZPRGET_ITEMS_REL', Version 'ECC_604', Consumer ''</text>
      <url>http://DUETBCCPL.bharathicement.com:8000/sap/xi/docu_apperror?ID=NA&OBJECT=%2fIWFND%2fCM_COS010&LANGUAGE=E&MSGV1=0&MSGV2=ZPRGET_ITEMS_REL&MSGV3=ECC_604</url>
      <id>010(/IWFND/CM_COS)</id>
      </faultDetail>
    - <faultDetail>
      <severity>error</severity>
      <text>The SAP system could not process your request. Contact your administrator</text>
      <url>http://DUETBCCPL.bharathicement.com:8000/sap/xi/docu_apperror?ID=NA&OBJECT=%2fIWFND%2fCOD011&LANGUAGE=E</url>
      <id>011(/IWFND/COD)</id>
      </faultDetail>
      </standard>
      </n0:StandardMessageFault>
    And got the status message as
    Call Failed
    I tested the bapi in SAP Backend system, its working fine.
    Can any body look into it where it is going wrong.
    Thanks & Regards,
    Kris

    Hi all,
    Issue has been resolved.
    Thanks
    Kris.

Maybe you are looking for