Testing the windows file server documents in KM

Hi all,
   I have configured WINDOWS as file server in KM.
   After configuring i should be able to share or access the docuemnts from the WINDOWS in KM
   How should i test WINDOWS documents in KM.ie., where can i find all the documents from WINDOWS in order to access it.
Is it in the ROOT folder of the KM Content in Content administration or somewhere else?
thanks in advance.
Regards
Sireesha.

Hi,
I have configured WINDOWS as file server in the following way.
1. Created a WINDOWS system in the system land scape.
2. Configured servlet Engine User .
3. Created a Network path
4. Configured a File repository in the Content Management
5. User mapping is done.
Now my doubt is where should i go and check the WINDOWS documents or files after configuring it.
Do v need to do anything else to get the all the files which are in WINDOWS.
Pls guide me.
Thanks in advance.
Regards
Sireesha.

Similar Messages

Migrate documents from the windows file server into km

Hi All,
I have around 100 GB of documents in a file server and i want to migrate the same data in to KM.
I am sure that there should be some standard process to do this,can any one please help me out in solving this.
Thanks
Ajay

Hi Ajay,
what do you mean by migrate? You could use a Windows Filessystem KM-Repository to integrated these files directly into KM (http://help.sap.com/saphelp_nw70/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm)
Otherwise you could use WebDAV (http://help.sap.com/saphelp_nw70/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm, http://help.sap.com/saphelp_nw70/helpdata/en/43/9600e5391e25dee10000000a1553f7/frameset.htm) or the Portal Drive (http://help.sap.com/saphelp_nw70/helpdata/en/42/c99b91341a6bade10000000a1553f6/frameset.htm) to copy these files in a (for example) DB repository.
Regards,
Holger.

When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this.

When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this?

Look for a program called BlueHarvest. I'm not sure if it still works with Mountain Lion.
I believe your file server can be set up to handle the metadata files, but I suppose that would depend on the Server software and your IT staff.

Portal on Unix cannot mount Windows File server

Hi Experts,
We had installed a NW 7.0 portal onto HP-UNIX server and integrated it with MS AD server. Now, we are facing an issue that we cannot mount windows files server when we tried to configured it with TREX. Had anyone tried this function or it is the limitation? Is the following statement still correct or do we have workaround solutions?
"If you are using the Microsoft Active Directory Service, you can only integrate documents into a Windows portal. The combination of Microsoft Active Directory Service and a UNIX portal is not supported."
Best Regards

Hi Tom,
have a look at this link:
[http://help.sap.com/saphelp_nw04s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm]
Your issue should work, but the prerequisite is for using the windows permissions:
"If you are using Microsoft Active Directory Service, you have to operate the Windows domain in mixed mode". If it is running in Native mode you cannot use the windows permissions. Nevertheless integrating documents into KM should work. The KM uses its own permissions instead.
Best regards,
Denis

Urgent: integrating windows file server into ep using KM.

hi..
can somebody give me detail steps of integrating windows file server into ep using KM.
when i give password in the network path it is not accepting the password of the windows....
Good answers will be rewarded points...
bye....

Hi,
You can check:
System Administration-System Configuration-KM-CM-Repository Managers-File System Repository-create a new item
Root Directory can be:
machine\sharedirectory
and in CM-Global Services-Network Paths->create a new item
in Network Path field:
machine\sharedirectory
enter your password
user: domain\user
Integrating Documents from a Windows System into KM
http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm
Patricio.

How can I open the windows file directory in "WHEN-BUTTON-PRESSED" trigger

Dear All,
How can I open the windows file directory in “WHEN-BUTTON-PRESSED” trigger?

Blessan Joseph,
The solution is dependent on your Forms version and if your applications is traditional Client/Server (CS) (Forms 6i and lower) or web deployed (Forms 6i and higher). For CS, you would use the Get_File_Name() built-in as Faa demonstrated. For Web, you will need to use the WebUtil library function Client_Get_File_Name() as Sarah (OGIR) demonstrated. Both of these functions will return the full path to a file. Note: WebUtil is an external library so it requires you to perform some configuration on your developer client as well as on the Application Server. WebUtil is included with Forms 9i and higher, but you must download it for Forms 6i.
My requirement is user should able to select windows directory for the output.Do you really need to allow the user to write to a file in the Windows directory? This is very dangerous and you should not allow users or programs to write to the Windows directory. Users should only be able to write files to "User" directories (\My Documents\<Directory name>).
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Query on integrating windows file server into SAP KM using WEBDAV

hi
I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
Regards,
Ganesh N

Hi Ganesh,
this should work in principle.
However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
Best regards,
André

Problem while integrating windows file server into SAP KM using WEBDAV

Hi
I am trying to integrate windows file server into SAP KM using WEBDAV . I have downloaded the kerberos ini filter and included in the windows system. I am only trying to bring the files in the same system into KM but with no luck. When i check the log file in the kerberos folder i am getting
<b>12:02:22 10828/10476 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter (&(objectCategory=person)(objectClass=user) (userPrincipalName=xxxx))</b>.
In the log i am getting the following
ERROR! Delegation Flag:Use any authentication protocol: NOT ACTIVE
                       Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                       Right-click 'IDBSRV8' and choose 'Properties'.
                       Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                       Select 'Use any authentication protocol'.
                ERROR! The Trusted-to-Authenticate-for-Delegation flag is not set for SPN 'HOST/idbsrv8.idbhq.org'.
                       Please check the SPN by calling 'setspn -l IDBSRV8'.
                       If the SPN is well known, configure the Trusted-to-Authenticate-for-Delegation flag:
                       Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                       Right-click 'IDBSRV8' and choose 'Properties'.
                       Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                       Select 'Use any authentication protocol' and choose 'Add'.
                       Select 'Users or Computers' and enter IDBSRV8 as object name.
                       Add the ServicePrincipalName HOST/idbsrv8.idbhq.org.
Can anybody please help me in this regard???
Regards,
Ganesh N
Message was edited by:
        Ganesh Natarajan

Hi Ganesh,
this error message tells you that there is no user in your active directory that has the userPrincipalName xxxx.
The SSO22KerbMapModule works as follows.
1. It receives a SAP Logon Ticket from the WebDAV request.
2. If valid the SAP username is extracted. In your case the SAP username is xxxx.
3. It then searches for a user in AD. It does so using the attribute in the ini-file that has been specified to contain the SAP username. In your case the SAP username should be identical with the userPrincipalName.
So you have to make sure that the portal user id (j_user) is mapped to the same AD user attribute that is specified in the ini-file .
Best regards,
Andre

Can't open the illustration. There is not enough room for the window. Increase document area and try again?

When i double click on a file in AI (CS6) I get the message: Can't open the illustration. There is not enough room for the window. Increase document are and try again

We can't know. We know nothing about your system nor your documents since you haven't told us.
Mylenium

Can I store referenced master files on a shared folder on a windows file server?

I have a windows file server where I have setup shared folders that my Macbook can access. Is it a supported configuration to keep my referenced master files on the windows share?

I hardly ever use the Bridge. I mostly use the Bridges to work one groups of new image RAW to edit metadata and create ACR settings. I don't use bridge features like collections or use the bridge to organize my image and I also don't use Lightroom. I mostly use Photoshop and Window's File explorer with my Image files. I have installed FastPictureViewer Codeg package to get thumbnails for RAW and PSD files in a Window's dialog. I don't like the delays introduced in workflows that are cause by the overhead requires for Bridge Cashes and Lighroom Databases.
However for you with 50 users sharing assets on network drives I would think you would need a library system above and beyond Bridge and Lightroom. A library system that provides access and version processes so users don't step on each others work.
If you want to use the bridge I do not believe it would be possible to use a shared cashed where multiple instances of the Bridge could concurrently maintain a common cache. I do not believe either Bridge or Lighroom design would have the locking protocols required for shared concurrent use.

Can't connect to the window application server.

I have installed the Sun Secure Global Desktop Software 4.2,
the client can connect to the unix application server but can't connect to the window applicaiont server.
What can i do?
Thank you.

Hi.
Are you sure you're using a Windows server which support Terminal Services? In other words, try (on the Windows server) by escaping to the CMD prompt and issue the
netstat -n
command as to see if port 3389 is listed in LISTEN state.
Best,
Rob

The Applications File Server could not open the file

Hi All,
We have shared appl_top between 2 nodes.
When running concurrent request such as active user report, i got the following error:
The Applications File Server could not open the file oXXXXX.out for read
I have found metalink note
The Applications File Server could not open the file o611681.out for read (Doc ID 1311372.1)
The $APPLCSF are all fine and so are the permissions.
I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?
i thought i can start up all node at the same time.
am i right to say that the last node run adautocfg is the primary node?
Thanks in advance

I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?Do you have PCP implemented? If yes, you do not need to start the CMs on the second node and running adcmctl.sh script on the first node would be enough.
i thought i can start up all node at the same time.What exactly do you start?
am i right to say that the last node run adautocfg is the primary node?Please explain what components are running on each node.
All the URLs Accessing EBS Are Getting Redirected to the Web Node Where Autoconfig Last Ran [ID 1349509.1]
Thanks,
Hussein

FSCT - Having Error "There were errors during running WordFileClose.dll scenario" when running the FSCT in controller & non-windows file server

I encounter 2 errors in the controller when running FSCT.
- "There were errors during running WordFileClose.dll scenario"
- "There were errors during running WordFileClose.dll scenario"
Does anyone has any ideas for this errors?
I am using the following server to run the FSCT:
- AD Server: Windows 2008 R2 SP1 x64
- FSCT Controller: Windows 2008 R2 SP1 x64
- Client: Windows 7 x64
- File Server: Non-Windows Server (EMC Isilon)
And the commands are as follows:
> fsct prepare dc /users 10 /clients testing /password password
> fsct prepare controller
> fsct prepare client /server ofscluster /password password /users 10 /domain abc.local /server_ip 192.168.2.16
> fsct prepare server /clients testing /password password /users 10 /domain abc.local /volumes \\ofscluster\fsroot1 /workload HomeFolders /create_only_fileset
> fsct run client /controller fsctcon /server ofscluster /password password /domain abc.local
fsct run controller /server ofscluster /password password /volumes \\ofscluster\fsroot1 /clients testing /min_users 2 /max_users 10 /step 2 /duration 360 /workload HomeFolders

Dear all,
The errors were:
<Error>1264 DeviceIoControl 1{WINERR}</Error>
<Error>Error executing scenario: WordFileOpen.dll</Error>
<Error>943 DeviceIoControl 50{WINERR}</Error>
<Error>Error executing scenario: WordFileClose.dll</Error>
Do you have any idea about what the errors mean?
Thanks,
Rayson

Publishing point is not starting in the windows media server

In the setup VCS expressway starter pack is used as call controller & the endpoints are registered to it. TCS is used for recording. A existing publishing point is used for live streaming using windows media server. This publishing point is not started when the recording starts for this recording alias. Windows media server is running locally in the TCS. I could see the below in the server logs. Please note that this setup has worked with this configuration for more than a year and it stopped working now. Your help on this greatly appreciated. Thanks.
13   2015-05-05T14:15:55+03:00   Info: Incoming call [address = 1000, address_type = CALLADDRESS_E164_ALIAS, call_id = 1, protocol = H323, rate = 5952]
14   2015-05-05T14:15:55+03:00   Info: Getting conference binding [booking_address = 003] - No binding found, proceeding with ad hoc call
15   2015-05-05T14:15:55+03:00   Info: Checking recording start time [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , record_delay = off]
16   2015-05-05T14:15:55+03:00   Info: Creating recording [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = ]
17   2015-05-05T14:15:55+03:00   Info: Handling RTP packet [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , time_since_first_packet = 1907] - Started writing media
18   2015-05-05T14:15:55+03:00   Info: Creating call [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, remote_address = 5001]
19   2015-05-05T14:15:55+03:00   Info: Updating temp RTP filename in DB [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, temp_rtp_dump_file = e:\livedata\RTP150505141555_1.ogg.tmp]
20   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
21   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
22   2015-05-05T14:15:56+03:00   Diagnostic: Setting playback main video frame rate [frame_rate = 30]
23   2015-05-05T14:15:56+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 128, channel = audio, payload_type = AAC-LD]
24   2015-05-05T14:15:57+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 4000, channel = video, payload_type = H.264]
25   2015-05-05T14:15:57+03:00   Info: Decoding video, Message from decoder [call_id = 1, decoder = Codian Video, message = Initialized H.264 decoder]
26   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
27   2015-05-05T14:15:57+03:00   Info: Finding output size; bucketing [optimal_output_size = 1280x720(16:9), output_bucket = 796x448, size_ext = 1280x720(16:9), size_main = 512x288(16:9), squared_ext = 1280x720(16:9), squared_main = 512x288(16:9)]
28   2015-05-05T14:15:57+03:00   Info: Transcode settings [extended_frame_rate = 0, extended_size = 1280x720(16:9), layout = 2, main_frame_rate = 0, main_height_ratio = 0, main_size = 512x288(16:9), negotiated_bitrate_kbps = 4128, output_bitrate_kbps = 800, output_frame_rate = 30, output_frame_rate_max = 30, output_size = 796x448(199:112), quality = 2, quality_bitrate_kbps = 800]
29   2015-05-05T14:15:57+03:00   Info: Setting up encoding [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, template = <transcode conference_id="904e92bb-9152-4ced-bf29-165f521e34b2" thumbnail_path="E:\data\www\slides\904e92bb-9152-4ced-bf29-165f521e34b2\thumbnails\"><clips action="transcode"/><metadata name="mxe-unicast" speaker="" copyright="" keywords="" description="" date="1430824555"/><writer source="pipnopip"><template codec="windowsMedia" delivery="DELIVERY_ON_DEMAND" qualitybitrateK="800" layout="pipnopip" piplocation="top/right" quality="Medium"/><output type="file" guid="e1ab0747-bbb4-44f0-b7de-2644e3921e63" directory="E:\data\media\"/><output multicast="false" multicast_address="" multicast_port_start="0" multicast_ttl="0" type="serverpush" guid="e952a7fc-87dc-4944-b26a-064c9897c3de" wwwdir="E:\data\www\" server_name="xxx.xxx.xxx.xxx" username="admin" password="********" port="8080" publishing_point_copy="" publishing_point=""/></writer><callinfo bitrateK="4128" hasaudio="true" hasextended="true" hasvideo="true" videoFrames="0" extendedFrames="0" duration="0" mainres="512x288" maindar="16:9" extres="1280x720" extdar="16:9"/></transcode>]
30   2015-05-05T14:15:57+03:00   Diagnostic: Setting thumbnail timer zero point [call_id = 1, zero_point = 0]
31   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
32   2015-05-05T14:15:57+03:00   Info: Decoding audio, Message from decoder [call_id = 1, decoder = Codian Audio, message = Initialized AAC-LD decoder 128000bps]
33   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
34   2015-05-05T14:15:58+03:00   Last message repeated 5 times
35   2015-05-05T14:15:58+03:00   Info: Setting output path [call_id = 1, path = e:\livedata\143082455700-82801609.wmv]
36   2015-05-05T14:15:58+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
37   2015-05-05T14:16:04+03:00   Last message repeated 25 times
38   2015-05-05T14:16:04+03:00   Info: Checking memory use [private_MB = 460, private_MB_previous = 118, ram_free_MB = 3245, vm_used_MB = 597, vm_used_MB_previous = 201, working_set_MB = 184]
39   2015-05-05T14:16:08+03:00   Warning: Reporting Windows Media writer status, Error occurred in WMT_ERROR [call_id = 1, address = http://xxx.xxx.xxx.xxx:8080/_3868463432921, error = error code = (0x80072eef)]
40   2015-05-05T14:16:08+03:00   Info: Adding Windows Media serverpush output [call_id = 1, async = 0x80072eef] - After wait

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

Mount windows file server over vpn

I have a Windows(2003SP2) file server within some LAN with IP 192.168.10.10 and with shared folder structure like
/Sity/District/
I am authorised to connect to this LAN over VPN (it works) and to connect to /Sity, but I am authorized only to see and modify files within /District folder.
With the command 'smbclient -U username //192.168.10.10/Sity' in Terminal I can connect to the server and e.g. get all the files from /Sity/District/. However, neither mount_smbfs in Terminal nor Connect to Server in Finder can mount the share - error is
mount_smbfs: negotiate phase failed: syserr = Connection refused, Finder complain about the username and the password. The /etc/nsmb.conf has the following structure
[default]
minauth=none
Is there a way to mount such share?

Yes, it replies 'could not connect to the server because the name or password is not correct'.
Same for almost all combinations of smb://WORKGROUP;user:password@IP/Sity[/District]
I also tried different options for mount_smbfs like '-I' with no result. Error reads
mount_smbfs: negotiate phase failed: syserr = Connection refused
There is also no network browsing (mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.)
But the smbclient works and I can get the folder structure.

Testing the windows file server documents in KM

Similar Messages

Maybe you are looking for