Testing while doing the database upgrade from 9.2.0.6 to 11.2.0.2 apps ?

Dear Experts,
Please note that we are in process of doing database upgrade from 9.2.0.6 to 11.2.0.2 ?
We have gone through the interoperablity note id for 11i 11gr2 ?
Step 1
upgrading the database from 9.2.0.6 to 9.2.0.8 ?
Step 2-
Upgrading the Forms patchset to 19 ?
Step-3
Applying the Rollup-6 patch ?
Step -4
Upgrading the database from 9.2.0.8 to 11.2.0.2 ?
We would like to know whether after each step do we have to do any kind of testing on the Oracle Application Instance and the database?
Please advise.
Regards
Mohammed.

We would like to know whether after each step do we have to do any kind of testing on the Oracle Application Instance and the database?There is no such a list. However, you can refer to the documents referenced in each task above and it should cover if any testing need to be done or not (for example, the Developer Patchset doc). For the rest of the docs you will have to do your regular testing (test the application/database and make sure it is working properly).
Also, make sure you review (Known issues on Top of 11i.ATG_PF.H. delta.6 (RUP6) - 5903765 [ID 459353.1]).
ATG RUP 7 is the latest 11i.ATG_PF patch.
About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
Known Issues On Top of 11i.ATG_PF.H.delta.7 (RUP7) - 6241631 [ID 858801.1]
Thanks,
Hussein

Similar Messages

  • While doing the most recent firmware upgrade, my iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

    While doing the most recent firmware upgrade, my new iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

    If you tried resetting the ipod and it still keeps having the same issue you described, try setting the ipod to disk mode.
    Here is an article from the apple support website on setting the ipod to disk mode.
    http://docs.info.apple.com/article.html?artnum=93651
    If you can get the ipod into disk mode, connect it to the computer and rrestore the ipod using itunes.
    if the ipod will not go into disk mode, you can return the ipod or set the ipod up for service via the apple ipod service depot.
    http://depot.info.apple.com/ipod

  • HT1414 I lost all my data while doing the latest software upgrade, how do I get it back if I dont have a backup on iTunes?

    I lost all my data while doing the latest software upgrade, how do I get it back if I dont have a backup on iTunes?

    If you don't have a backup, then all your pics/text/notes are gone.
    You can sync back music and app.  If you were syncing your contacts with a program in itunes, then you'll get that back.
    Not sure why you didn't do a backup, especially prior to doing an upgrade.

  • Forms HOST command no longer works after database upgrade from 10g to 11g

    Hi,
    After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
    1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
    2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
    I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
    Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
    The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
    Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
    Anyway, I was hoping someone would help with either of these.
    1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
    2) OR be able to upload directly to the database server - wanted to do that originally
    Any help would be appreciated

    Solution for those interested and for anyone else searching this forum for a solution
    I found this on My Oracle Support:
    <h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
    Applies To: Oracle Forms - Version 11.1.1.1.0 and later
    Sun SPARC Sun OS
    Symptoms:
    When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
    Steps to be followed:
    1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
    2) Locate the following environment variable:
    LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
    3) Comment out this variable. After the changes, it will look like the following:
    #LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
    3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
    LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
    (This makes HOST AND RUN_REPORT_OBJECT work fine).
    4) Save the file and execute your forms. The Host() built-in will work as expected
    The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

  • Database upgradation from 10.2.0.3 to 11 R2

    Hi
    I am planning to upgrade my production database from 10.2.0.3 to 11.2. Before doing into production am testing it into our Test server in Linux OS. I got manual procedure of database upgradation from metalink. I installed Oracle 11g as software only into my test server. Now in step 2 , they describe as under
    $ sqlplus '/ as sysdba'
    SQL> spool upgrade_info.log
    SQL> @utlu112i.sql
    SQL> spool off
    SQL>
    My query is : I will run the script utlu112i.sql from which home ? Oracle 10g ? oracle 11g?
    Please give me your wise suggestion.
    Regards
    Rabi

    Hi Rabi,
    First of all go to location (Oracle 11g) $ORACLE_HOME/rdbms/admin and
    copy the utlu112i.sql script to /tmp directory.
    Now login to 10g database “/ as sysdba” and startup the 10g database, then:
    SQL> spool /tmp/upgrade_info.log
    SQL> @/tmp/utlu112i.sql
    SQL> spool off
    Hope this will help you.
    Regards
    Malay

  • EnvironmentFailureException thrown while recovering the database!

    While recovering the database, an EnvironmentFailureException with LOG_FILE_NOT_FOUND was thrown. The exception was thrown after some data was recovered, and the left data can not be recovered because of the EnvironmentFailureException.
    I upgraded the je to 4.1.7, but the data still can not be recovered!
    Caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid because of previous exception: (JE 4.0.92) /home/admin/shopcenter/cdncleaner fetchTarget of 0x64/0x3b8f73 parent IN=8811763 IN class=com.sleepycat.je.tree.IN lastFullVersion=0xffffffff/0xffffffff parent.getDirty()=true state=0 LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is invalid and must be closed.
         at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1241)
         at com.sleepycat.je.tree.Tree.searchSubTreeInternal(Tree.java:1858)
         at com.sleepycat.je.tree.Tree.searchSubTree(Tree.java:1682)
         at com.sleepycat.je.tree.Tree.search(Tree.java:1548)
         at com.sleepycat.je.dbi.CursorImpl.searchAndPosition(CursorImpl.java:2054)
         at com.sleepycat.je.Cursor.searchInternal(Cursor.java:2088)
         at com.sleepycat.je.Cursor.searchAllowPhantoms(Cursor.java:2058)
         at com.sleepycat.je.Cursor.search(Cursor.java:1926)
         at com.sleepycat.je.Cursor.getSearchKey(Cursor.java:1351)
         at com.sleepycat.util.keyrange.RangeCursor.doGetSearchKey(RangeCursor.java:966)
         at com.sleepycat.util.keyrange.RangeCursor.getSearchKey(RangeCursor.java:593)
         at com.sleepycat.collections.DataCursor.doGetSearchKey(DataCursor.java:571)
         at com.sleepycat.collections.DataCursor.initForPut(DataCursor.java:812)
         at com.sleepycat.collections.DataCursor.put(DataCursor.java:752)
         at com.sleepycat.collections.StoredContainer.putKeyValue(StoredContainer.java:322)
         at com.sleepycat.collections.StoredMap.put(StoredMap.java:280)
         at com.taobao.shopservice.picture.core.util.BdbStoredQueueImpl.offer(BdbStoredQueueImpl.java:118)
         at com.taobao.shopservice.picture.core.service.CdnClearServiceImpl.clearCdnCache(CdnClearServiceImpl.java:45)
         at sun.reflect.GeneratedMethodAccessor484.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:304)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.taobao.shopservice.common.monitor.ProfileInterceptor.invoke(ProfileInterceptor.java:26)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy74.clearCdnCache(Unknown Source)
         at com.taobao.shopservice.picture.core.service.PictureWriteServiceImpl.movePicturesToRecycleBin(PictureWriteServiceImpl.java:302)
         at com.taobao.shopservice.picture.core.service.PictureWriteServiceImpl.deletePictures(PictureWriteServiceImpl.java:207)
         at sun.reflect.GeneratedMethodAccessor483.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:304)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.taobao.shopservice.common.monitor.ProfileInterceptor.invoke(ProfileInterceptor.java:26)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy77.deletePictures(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor482.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.taobao.hsf.rpc.tbremoting.provider.ProviderProcessor.handleRequest0(ProviderProcessor.java:222)
         at com.taobao.hsf.rpc.tbremoting.provider.ProviderProcessor.handleRequest(ProviderProcessor.java:174)
         at com.taobao.hsf.rpc.tbremoting.provider.ProviderProcessor.handleRequest(ProviderProcessor.java:41)
         at com.taobao.remoting.impl.DefaultMsgListener$1ProcessorExecuteTask.run(DefaultMsgListener.java:131)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: java.io.FileNotFoundException: /home/admin/shopcenter/cdncleaner/00000064.jdb (No such file or directory)
         at java.io.RandomAccessFile.open(Native Method)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:98)
         at com.sleepycat.je.log.FileManager$1.<init>(FileManager.java:993)
         at com.sleepycat.je.log.FileManager.openFileHandle(FileManager.java:992)
         at com.sleepycat.je.log.FileManager.getFileHandle(FileManager.java:888)
         at com.sleepycat.je.log.LogManager.getLogSource(LogManager.java:1073)
         at com.sleepycat.je.log.LogManager.getLogEntry(LogManager.java:779)
         at com.sleepycat.je.log.LogManager.getLogEntryAllowInvisibleAtRecovery(LogManager.java:743)
         at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1225)
         ... 49 more
    2011-03-24 00:00:27,967 INFO [org.quartz.core.JobRunShell] Job DEFAULT.cdnCleanerJobDetail threw a JobExecutionException:
    org.quartz.JobExecutionException: Invocation of method 'clearCdn' on target class [class com.taobao.shopservice.picture.core.job.clearcdn.CdnCleaner] failed [See nested exception: com.sleepycat.je.EnvironmentFailureException: (JE 4.0.92) Environment must be closed, caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid because of previous exception: (JE 4.0.92) /home/admin/shopcenter/cdncleaner fetchTarget of 0x64/0x3b8f73 parent IN=8811763 IN class=com.sleepycat.je.tree.IN lastFullVersion=0xffffffff/0xffffffff parent.getDirty()=true state=0 LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is invalid and must be closed.]
         at sun.reflect.GeneratedConstructorAccessor102.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:85)
         at org.springframework.scheduling.quartz.MethodInvokingJobDetailFactoryBean$MethodInvokingJob.executeInternal(MethodInvokingJobDetailFactoryBean.java:283)
         at org.springframework.scheduling.quartz.QuartzJobBean.execute(QuartzJobBean.java:86)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
    * Nested Exception (Underlying Cause) ---------------
    com.sleepycat.je.EnvironmentFailureException: (JE 4.0.92) Environment must be closed, caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid because of previous exception: (JE 4.0.92) /home/admin/shopcenter/cdncleaner fetchTarget of 0x64/0x3b8f73 parent IN=8811763 IN class=com.sleepycat.je.tree.IN lastFullVersion=0xffffffff/0xffffffff parent.getDirty()=true state=0 LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is invalid and must be closed.
         at com.sleepycat.je.EnvironmentFailureException.wrapSelf(EnvironmentFailureException.java:197)
         at com.sleepycat.je.dbi.EnvironmentImpl.checkIfInvalid(EnvironmentImpl.java:1403)
         at com.sleepycat.je.Database.checkEnv(Database.java:1772)
         at com.sleepycat.je.Database.openCursor(Database.java:619)
         at com.sleepycat.collections.CurrentTransaction.openCursor(CurrentTransaction.java:416)
         at com.sleepycat.collections.MyRangeCursor.openCursor(MyRangeCursor.java:54)
         at com.sleepycat.collections.MyRangeCursor.<init>(MyRangeCursor.java:30)
         at com.sleepycat.collections.DataCursor.init(DataCursor.java:171)
         at com.sleepycat.collections.DataCursor.<init>(DataCursor.java:59)
         at com.sleepycat.collections.StoredContainer.getValue(StoredContainer.java:301)
         at com.sleepycat.collections.StoredMap.get(StoredMap.java:241)
         at com.taobao.shopservice.picture.core.util.BdbStoredQueueImpl.peek(BdbStoredQueueImpl.java:131)
         at com.taobao.shopservice.picture.core.util.BdbStoredQueueImpl.poll(BdbStoredQueueImpl.java:169)
         at com.taobao.shopservice.picture.core.job.clearcdn.CdnCleaner.clearCdn(CdnCleaner.java:194)
         at sun.reflect.GeneratedMethodAccessor641.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.util.MethodInvoker.invoke(MethodInvoker.java:283)
         at org.springframework.scheduling.quartz.MethodInvokingJobDetailFactoryBean$MethodInvokingJob.executeInternal(MethodInvokingJobDetailFactoryBean.java:272)
         at org.springframework.scheduling.quartz.QuartzJobBean.execute(QuartzJobBean.java:86)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
    Caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid because of previous exception: (JE 4.0.92) /home/admin/shopcenter/cdncleaner fetchTarget of 0x64/0x3b8f73 parent IN=8811763 IN class=com.sleepycat.je.tree.IN lastFullVersion=0xffffffff/0xffffffff parent.getDirty()=true state=0 LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is invalid and must be closed.
         at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1241)
         at com.sleepycat.je.tree.Tree.searchSubTreeInternal(Tree.java:1858)
         at com.sleepycat.je.tree.Tree.searchSubTree(Tree.java:1682)
         at com.sleepycat.je.tree.Tree.search(Tree.java:1548)
         at com.sleepycat.je.dbi.CursorImpl.searchAndPosition(CursorImpl.java:2054)
         at com.sleepycat.je.Cursor.searchInternal(Cursor.java:2088)
         at com.sleepycat.je.Cursor.searchAllowPhantoms(Cursor.java:2058)
         at com.sleepycat.je.Cursor.search(Cursor.java:1926)
         at com.sleepycat.je.Cursor.getSearchKey(Cursor.java:1351)
         at com.sleepycat.util.keyrange.RangeCursor.doGetSearchKey(RangeCursor.java:966)
         at com.sleepycat.util.keyrange.RangeCursor.getSearchKey(RangeCursor.java:593)
         at com.sleepycat.collections.DataCursor.doGetSearchKey(DataCursor.java:571)
         at com.sleepycat.collections.DataCursor.initForPut(DataCursor.java:812)
         at com.sleepycat.collections.DataCursor.put(DataCursor.java:752)
         at com.sleepycat.collections.StoredContainer.putKeyValue(StoredContainer.java:322)
         at com.sleepycat.collections.StoredMap.put(StoredMap.java:280)
         at com.taobao.shopservice.picture.core.util.BdbStoredQueueImpl.offer(BdbStoredQueueImpl.java:118)
         at com.taobao.shopservice.picture.core.service.CdnClearServiceImpl.clearCdnCache(CdnClearServiceImpl.java:45)
         at sun.reflect.GeneratedMethodAccessor484.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:304)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.taobao.shopservice.common.monitor.ProfileInterceptor.invoke(ProfileInterceptor.java:26)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy74.clearCdnCache(Unknown Source)
         at com.taobao.shopservice.picture.core.service.PictureWriteServiceImpl.movePicturesToRecycleBin(PictureWriteServiceImpl.java:302)
         at com.taobao.shopservice.picture.core.service.PictureWriteServiceImpl.deletePictures(PictureWriteServiceImpl.java:207)
         at sun.reflect.GeneratedMethodAccessor483.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:304)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.taobao.shopservice.common.monitor.ProfileInterceptor.invoke(ProfileInterceptor.java:26)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy77.deletePictures(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor482.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.taobao.hsf.rpc.tbremoting.provider.ProviderProcessor.handleRequest0(ProviderProcessor.java:222)
         at com.taobao.hsf.rpc.tbremoting.provider.ProviderProcessor.handleRequest(ProviderProcessor.java:174)
         at com.taobao.hsf.rpc.tbremoting.provider.ProviderProcessor.handleRequest(ProviderProcessor.java:41)
         at com.taobao.remoting.impl.DefaultMsgListener$1ProcessorExecuteTask.run(DefaultMsgListener.java:131)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: java.io.FileNotFoundException: /home/admin/shopcenter/cdncleaner/00000064.jdb (No such file or directory)
         at java.io.RandomAccessFile.open(Native Method)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:98)
         at com.sleepycat.je.log.FileManager$1.<init>(FileManager.java:993)
         at com.sleepycat.je.log.FileManager.openFileHandle(FileManager.java:992)
         at com.sleepycat.je.log.FileManager.getFileHandle(FileManager.java:888)
         at com.sleepycat.je.log.LogManager.getLogSource(LogManager.java:1073)
         at com.sleepycat.je.log.LogManager.getLogEntry(LogManager.java:779)
         at com.sleepycat.je.log.LogManager.getLogEntryAllowInvisibleAtRecovery(LogManager.java:743)
         at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1225)
         ... 49 more

    I mean that i can open the database and read some data from it, which was stored before the database was closed, and than the exception was thrown.
    here is exception stack with JE 4.1.7:
    com.sleepycat.je.EnvironmentFailureException: (JE 4.1.7) F:\job fetchTarget of 0x64/0x4735f7 parent IN=7847269 IN class=com.sleepycat.je.tree.IN lastFullVersion=0x66/0x927f09 parent.getDirty()=false state=0 LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is invalid and must be closed.
         at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1337)
         at com.sleepycat.je.tree.IN.fetchTargetWithExclusiveLatch(IN.java:1278)
         at com.sleepycat.je.tree.Tree.getNextBinInternal(Tree.java:1358)
         at com.sleepycat.je.tree.Tree.getPrevBin(Tree.java:1240)
         at com.sleepycat.je.dbi.CursorImpl.getNextWithKeyChangeStatus(CursorImpl.java:1754)
         at com.sleepycat.je.dbi.CursorImpl.getNext(CursorImpl.java:1617)
         at com.sleepycat.je.Cursor.retrieveNextAllowPhantoms(Cursor.java:2488)
         at com.sleepycat.je.Cursor.retrieveNext(Cursor.java:2304)
         at com.sleepycat.je.Cursor.getPrev(Cursor.java:1190)
         at com.ppsoft.bdb.test.Main.main(Main.java:52)
    Caused by: java.io.FileNotFoundException: F:\job\00000064.jdb (No such file or directory)
         at java.io.RandomAccessFile.open(Native Method)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:98)
         at com.sleepycat.je.log.FileManager$1.<init>(FileManager.java:995)
         at com.sleepycat.je.log.FileManager.openFileHandle(FileManager.java:994)
         at com.sleepycat.je.log.FileManager.getFileHandle(FileManager.java:890)
         at com.sleepycat.je.log.LogManager.getLogSource(LogManager.java:1074)
         at com.sleepycat.je.log.LogManager.getLogEntry(LogManager.java:778)
         at com.sleepycat.je.log.LogManager.getLogEntryAllowInvisibleAtRecovery(LogManager.java:742)
         at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1320)
         ... 9 more

  • R3load -testconnect fails while doing the Export Prepare

    Hi All,
    R3load -testconnect fails while doing the Export Prepare for the Unicode Conversion. I have upgraded the CRM system from CRM 4.0 to SAP Netweaver 7.0 with EHP1. Now I doing the Unicode Conversion. While using the sapinst as root to start the unicode conversion I am getting the following error:
    /usr/sap/CSX/SYS/exe/run/R3load -testconnect [E]
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    /usr/sap/CSX/SYS/exe/run/R3load: START OF LOG: 20090603143131
    /usr/sap/CSX/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
    /usr/sap/CSX/SYS/exe/run/R3load: version R7.01/V1.4
    Compiled Mar 10 2009 23:03:11
    /usr/sap/CSX/SYS/exe/run/R3load -testconnect [E]
    (DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
    (DB) ERROR: DbSlErrorMsg rc = 20
    /usr/sap/CSX/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/CSX/SYS/exe/run/R3load: END OF LOG: 20090603143131
    Regards
    Karthik Ravoori

    Hi,
    These note May help you.
    where are you placing the New executables.Always use /sapmnt/SID/exe.If you are placing them in /usr/sap/CSX/SYS/exe/run/ then you always get the error.
    I found in one of the note the same error that you are getting.
    Search in note with text DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
    Note 459899 - SAP BW 3.0A Server Installation: UNIX/Oracle
    This Note Talks about the verson you should have for the kernel
    Note 898181 - Corrupt cluster record creates signal 11
    Thanks
    Rishi Abrol

  • Error While doing the Asset Credit Memo -ABGL

    HI,
    While doing the Asset Credit Memo -ABGL,i am getting the below error.Kindly help me with your inputs.
    Balance for transaction type group 10 negative for the area 01
    Message no. AA629
    Asset affected: 406000000004-0000
    Diagnosis
    With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
    System response
    The system rejects this posting.
    Procedure
    Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
    Thanks
    Supriya

    Check your config in OABN / OADB
    The depriciation area 01 can allow you post values only postive .. in OADB
    it has maintained Acquisition values Postive or zero values and net book
    values has miantained Postive or 0 values. so based on this setting u cannt
    post any negative values for this asset.

  • Error while doing the Usage Decision in transaction QA32

    Hello Friends,
    While doing the goods receipt for customer returns from customer, system generated a inspection lot with inspection type 06.
    So in QA32 transaction, system is showing that inspection lot, but in same screen, against the column InspPlan: Material, system is not showing any entry.
    Later on after analysis, i found that no inspection plan was assinged to the material, Plant for which that inspection lot was created. When i checked that inpection lot in transaction QA03, in Insp. Specifications tab, agaisnt the Assigned Specification section, system was not showing any entry in fields Group, Group Counter, Plant, Usage.
    And against that inspection lot,status CRTD, PREQ, CHCR are active.
    Because of  which, when user is trying to do the UD against this lot system throwing the error message as Status check error.
    When i checked again i found that status CRTD is throwing the error message.
    Hence friend, i want to do the Usage decision  for that inspection lot than how to do?
    Now user has assigned the material, plant to the inspection plan in QP02.
    Should i go to QA02 transaction, and in Insp. Specification tab, for fields group, group counter, usage, Plant, maintain the values?
    Will this allow me to do the usage decision against the inspection lot which got generated when no inspection plan was assingned to that material, plant?
    Waiting for your valuable inputs.

    For Result Recording and Ud the inspection lot status must be REL as u told ur status is CRTD it Mean Some master
    is missing in inspection lot,generally inspection plan for that u run QA02 enter inspection lot no go to specification tab
    there a button assigned specification there click on that as u click on button u will find that plan for above material copied to lot and it will show u plan detail line group and group counter no.
    then go to next screen Sample if sample management is active and click on sample then system will calculate sample size then save ur lot. it would get Status As REL now ui can enter result or take UD
    for QM setting Refer
    http://sap-questions.blogspot.com/

  • Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

    Hi,
    We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
    Error: 4014, Severity:20, State: 11.   A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
    SQL Server Data Tools and SQL Server Database Engine reside on the same server.
    We tried the following:
    Disabling TCP Chimney Offload
    Installed Windows Server 2008 SP1
    Splitting our SSIS code into multiple steps so it is not all one large continuous operation
    The error occurs during a BulkDataLoad task.
    Other options we are investigating with the engineering team (out-sourced, so delayed responses):
    Firewall configurations (everything is local, so this should not make a difference)
    Disabling the anti-virus scanner
    Are there other things we can try?
    Any insight is greatly appreciated.
    Thanks!

    Hi HenryKwan,
    Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
    Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
    Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
    Set "RetainSameConnection" Property to FALSE on the all the connection managers.
    Reference:
    https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
    If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Error while opening the database.--urgent---pls help...

    Hi,
    Got the below error while opening the database.
    Database version is :10.1.0.4.0
    database is in noarchive log mode.
    the database is coming in to no-mount state and mount state quite easily but not able to open the database.
    Got the below error while opening the database.
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    Mon Sep 29 15:32:39 2008
    Errors in file /xxx/udump/aaa_ora_18737.trc:
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    Mon Sep 29 15:32:41 2008
    DEBUG: Replaying xcb 0xc0000000350c1c18, pmd 0xc0000000353b21f0 for failed op 8
    Doing block recovery for file 2 block 9483
    No block recovery was needed.
    on Sep 29 15:34:01 2008
    Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    Mon Sep 29 15:34:04 2008
    Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    PMON: terminating instance due to error 472
    Instance terminated by PMON, pid = 18723
    Please help me....................

    Hi..
    This ORA-600 refers to a mismatch has been detected between Redo records and rollback (Undo) records.Is better to lock a call with oracle support.Secondly, apply latest patch on the DB.
    I had expereiced the same error, but my DB was in open mode, so i created a new undo tablespace and changed the undo_tablespace parameter and it worked.
    Anand

  • Error while Registering the Database with Catalog..

    I m creating recovery catalog in same database, and getting the errors.
    1. I have created TOOLS tablespace
    2.CREATE USER RMAN2
    SQL> CREATE USER rman IDENTIFIED BY cat
    2 TEMPORARY TABLESPACE temp
    3 DEFAULT TABLESPACE tools
    4 QUOTA UNLIMITED ON tools;
    CREATE USER rman IDENTIFIED BY cat
    ERROR at line 1:
    ORA-01920: user name 'RMAN' conflicts with another user or role name
    SQL> ed
    Wrote file afiedt.buf
    1 CREATE USER rman2 IDENTIFIED BY cat
    2 TEMPORARY TABLESPACE temp
    3 DEFAULT TABLESPACE tools
    4* QUOTA UNLIMITED ON tools
    SQL> /
    User created.
    3. GRANT RECOVERY_CATALOG_OWNER
    SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
    Grant succeeded.
    4. To create the recovery catalog:
    1. Connect to the database that will contain the catalog as the catalog owner.
    H:\>rman catalog rman2/cat@rock
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to recovery catalog database
    2. Run the CREATE CATALOG command to create the catalog.
    RMAN> CREATE CATALOG;
    recovery catalog created
    3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
    H:\>sqlplus
    SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter user-name: rman2/cat
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> select count(*) from cat;
    COUNT(*)
    91
    SQL> ed
    Wrote file afiedt.buf
    1 select owner, table_name, tablespace_name
    2 from dba_tables
    3* where table_name='DB'
    SQL> /
    OWNER TABLE_NAME
    TABLESPACE_NAME
    RMAN2 DB
    TOOLS
    RMAN DB
    ABAMCO_TEST
    Next step is to registering the Database in the Recovery Catalog.
    Registering a Database in the Recovery Catalog
    H:\>rman TARGET / CATALOG rman2/cat@rock
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-04005: error from target database:
    ORA-01031: insufficient privileges
    I m getting above error while registering the Database with Catalog,
    Can anybody help me how can I register the Database with Catalog.????
    Waiting for Reply!!!!!!!

    Dear Manoj I can log in at TARGET Database.
    H:\>rman
    Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    RMAN> connect target sys/rock
    connected to target database: ROCK (DBID=3255117147)
    RMAN>
    ============================================================
    USING CONNECT STRING as you said.
    H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
    Argument Value Description
    target quoted-string connect-string for target database
    catalog quoted-string connect-string for recovery catalog
    nocatalog none if specified, then no recovery catalog
    cmdfile quoted-string name of input command file
    log quoted-string name of output message log file
    trace quoted-string name of output debugging message log file
    append none if specified, log is opened in append mode
    debug optional-args activate debugging
    msgno none show RMAN-nnnn prefix for all messages
    send quoted-string send a command to the media manager
    pipe string building block for pipe names
    timeout integer number of seconds to wait for pipe input
    checksyntax none check the command file for syntax errors
    Both single and double quotes (' or ") are accepted for a quoted-string.
    Quotes are not required unless the string contains embedded white-space.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00552: syntax error in command line arguments
    RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
    RMAN-01007: at line 0 column 16 file: command line arguments
    H:\>rman
    It didnt work either.
    I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog.

  • Compensation Planning - Error while doing the planning for Employee

    Hi Friends,
    We have implemented standard MSS Business package.
    Line Mangers are using the Compensation Planning Iview and are facing errors while sending it for further approvals.
    In the steps.
    In the last step they get  RFC_ERROR_SYSTEM_FAILURE.
    A critical error has occurred. Processing of the service was terminated.
    Access via NULL Object reference not possible.,error key : RFC_ERROR_SYSTEM_FAILURE.
    Also to note that while doing the planning we get " No budget Data available"
    Is budget data mandatory to complete planning. However in test systems we were able to run the complete cycle even without the budget data we were able to complete one cycle.
    Kindly advise .
    Thanks
    Santosh

    Hello..
    This might point to an unhanded exception. There should be a backend dump (ST22) available and that would help in more analysis. You might need a ABAPer to look into the dump. You may paste the dump here for more analysis.

  • Error while starting the Database

    Hi,
    I am getting the following error while starting the Database instance.
    ORA-03113: end-of-file on communication channel.
    How to fix this issue? i tried some of the options mentioned in docs in metalink. But still i am not able to fix.
    Anypointers on this is appreciated.
    Thanks & Regards,
    Srikanth

    Can you paste lines from alertlog file..

  • Error while doing the repository export

    hi,
    I am getting error while doing the export repository,Message: GEN-13, Additional Message: Dictionary is not available on this database, can anyone help me how to resolve this issue.
    thanks,
    Sundar M

    Hi Sundar,
    Please provide the export repository command, what you used and the log file to review.
    The error "Dictionary is not available on this database" will pop up when Siebel Repository is not present in DB.
    For export process you have to give repository name as "Siebel Repository" and it will export schema in to *.dat file.
    NOTE: Do not change Siebel Repository name for export process.
    Thanks,
    Shilpi

Maybe you are looking for

  • How to run a 10g report from command line ?

    Good Afternoon, Please advise if there is a way to run a 10g report from command line. We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to

  • Must declare the scalar variable

    I Am getting error as Must declare the scalar variable "@Imageid" for the following code,while executing, exec spGetPager  ' ' , ' ', ' 3 ', ' ' In my coding I pass querystring value like 1,2,3 etc CREATE PROCEDURE spGetPager       @PageNo int = 1,  

  • No Log Found

    Hi, Just looking for some conformation, Within OBIEE when I try to view Log I get the log not found error, From what I have read there was a patch if you were running 1.1.3.0 but this was fixed in version 1.1.4.0 I am currently running 1.1.5.0 yet ge

  • Convert Flash to iPod

    Hi everyone, Do you know of a way to convert a Flash file (.slf) to .mp4 or another format that the iPod video/classic will accept? I googled it and I can only find PC versions of applications that will do this...what about for the Mac faithful? Plea

  • BDC Error Processing

    hi all while uploading large amount of data thru BDC session mtd if an error occurs while the process how to know how much of the records are inserted into the database . Is there any specific function to do so. Please tell me how to do this.