Testing

Hi SAP guru,
Can u please help me in knowing the testing of following scenarios.
1.IDOC to file scenario
2.File to HTTP
Thanks & Regards
Vijaya

Hi,
For Idoc to File Scenario.
IN SAP
first send idoc through ALE testing tool we19 from SAP.
and then check whether the idoc is succesfully created or not in we02/we05.
and check whether the idoc successfully sent from SAP or not in Tcode tRFC port sm58.
In XI.
Check in IDX5 whether the XI is receiving Idoc or not.
in sxi_monitor check for message processing.
In RWB.
Check the file adapter status in communicational channel monitoring.
Rgds,
siva

Similar Messages

Unit Testing, Null, and Warnings

I have a Unit Test that includes the following lines:
Dim nullarray As Integer()()
Assert.AreEqual(nullarray.ToString(False), "Nothing")
The variable "nullarray" will obviously be null when ToString is called (ToString is an extension method, which is the one I am testing). This is by design, because the purpose of this specific unit test is to make sure that my ToString extension
method handles null values the way I expect. The test runs fine, but Visual Studio 2013 gives includes the following warning:
Variable 'nullarray' is used before it has been assigned a value. A null reference exception could result at runtime.
This warning is to be expected, and I don't want to stop Visual Studio 2013 from showing this warning or any other warnings, just this specific case (and several others that involve similar scenarios). Is there any way to mark a line or segment
of code so that it is not checked for warnings? Otherwise, I will end up with lots of warnings for things that I am perfectly aware of and don't plan on changing.
Nathan Sokalski [email protected] http://www.nathansokalski.com/

Hi Nathan Sokalski,
Variable 'nullarray' is used before it has been assigned a value. A null reference exception could result at runtime.
Whether the warning above was thrown when you built the test project but the test run successfully? I assume Yes.
Is there any way to mark a line or segment of code so that it is not checked for warnings?
There is no built-in way to make some code snippet or a code line not be checked during compiling, but we can configure some specific warnings not to be warned during compiling in Visual Basic through project Properties->Compile
tab->warning configurations box.
For detailed information, please see: Configuring Warnings in Visual Basic
Another way is to correct your code logic and make sure the code will not generate warning at runtime.
If I misunderstood you, please tell us what code you want it not to be checked for warnings with a sample so that we can further look at your issue.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Previewing on local testing server

When previewing a file in the Dreamweaver development
environment, Dreamweaver loads the file, say testfile.html, in the
browser with its file system address, eg
file://Applications/MAMP/htdocs/jsMath/test/testfile.html. However,
the local website address of this file is
http://localhost:8888/jsMath/test/testfile.html.
This leads to a security error
Security Error: Content at
file:///Applications/MAMP/htdocs/jsMath/test/testfile.html may not
load data from
http://localhost:8888/jsMath/plugins/autoload.js.
The problem can be circumvented by avoiding the Dreamweaver
preview and hand-loading the file directly as
http://localhost:8888/jsMath/test/testfile.html
Surely the preview feature must not be bound by this
restriction. What might be done to get preview to work properly
with this local testing server?
-dao

daoliver wrote:
> Surely the preview feature must not be bound by this
restriction. What might
> be done to get preview to work properly with this local
testing server?
You need to define the testing server correctly in your site
definition.
In your case, the Testing server folder field should be set
to
Applications/MAMP/htdocs/jsMath/test/ and the URL prefix to
http://localhost:8888/jsMath/test/.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

SSL TEST IN R12

Hi,
we are about to implement SSL in ebs r12.0.4 to ensure that the user name and password get passed over the browser as encrypted(by default which is passed as simple text).
Now i am following metalink document Enabling SSL in Release 12 [ID 376700.1]
Initially i was testing with the demo certifcatest at the $INST_TOP/certs/Apache.
All the middle tier setups has been done.Then when i restarted the Application and tried to connect my url that get redirected to the SSL port correctly but then failed with following:--
500 Internal Server Error
java.lang.NoClassDefFoundError     at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:161)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)Please help.
Edited by: Susmit on Dec 24, 2010 4:24 PM

Hi;
please check below notes:
"500 Internal Server Error - java.lang.NoClassDefFoundError: oracle.apps.fnd.profiles.Profiles" on 10G [ID 567554.1]
R12: Troubleshooting 500 Internal Server Error in Oracle E-Business suite [ID 813523.1]
Regard
Helios

Open and close posting periods on test system

Hello together,
to open and close posting periods is only allowed on the develepment und the production client, but not on the test client.
It is an customizing object, but the flag "current settings" is set, so you also can change the settings on the production system.
In the test system, it only can be changed by opening the system for customizing using SCC4 und change to "Changes without automatic recording".
Is there a way to allow open and close posting periods on the test system without opening the client for customizing?
Regards,
Michael

Hi Michael,
Please, refer to the note 356483. Proceed as following:
Call transaction SE54
Enter the Customizing object (view or table)
Select "Generated objects"
Choose "Create/change"
Select "no, or user, recording routine" in the bottom part of the screen
Save the change
The view in your case is V_T001B.
Regards,
Eli

Dunning report difference in dev,testing and prod server in sap

Hi all..
we are facing a problem while executing the tcode f150 in dev,tsting and production server.
while giving the same run on and identification,the different parameters are coming and the status is geting changed.
in ker,the process is getting compelted,in testing the process is getting sceduled,complete but getting the status as"process completed but job deleted".
and in production,the status like testing server is coming but some tabs(from the too bar where delete,etc lies)are not getting to see,its not showing up.
please tell me if we can check it through some tcodes,or eliminate the eorr.
we are not able to locate the cause behind.thanks in adv.

Hi chandu,
In my previous Organisation we got exactly the same landscape for BW as you described.BCS(BAYER COPSCIENCE LTD) operates a BW System Landscape with one centralized Global Development System and three regional Quality Assurance and Production Systems located in Europe, Asia Pacific and Americas. This Landscape is to ensure consistent data models to be available in all regional systems as well as to minimize development efforts and make use of respective synergies.
This is perfectly working for BCS ,and I think, this is the most approriate way of handling of resources.
Regards
CSM Reddy

GT70 2PC – Software testing and performance report.

It is so excited here again. Currently, my first/only object after work is playing Titanfall.
I intended to share another performance testing today. But I didn’t. I found there are too many great open box posts on different forums. Therefore, I decide to dig the MSI software compatibility and do a touring. What can I say? I’m Mr.Curiosity who really desires to know every built-in application in system. That is why I share this article with you, my friends. I would like to discuss with everybody who is interested in MSI software. Of course, I have some performance reports for you, too. Please also remind me if you find any typo/wrong in this post. Thanks in advance.
1. MSI Boot Configure
This is the first software which pops up immediately. It is thoughtful design because we can choose enter the [Windows 8.1 metro] or [desktop] by ourselves now. I give it two thumbs up!!!
Select your favorite boot configuration and press [OK]. If we want it work immdiately, we can logout the system and re-login again.
2.   MSI Remind Manager
Honestly, I didn’t know what it is in the beginning. The cute robot shows every time when I login the system. I found this is a reminder for product registration. Good, I would like to have best MSI support and warranty for my lovely GT70 2PC. But don’t worry, if you don’t want to get this message again, you just need to select the right option and close it.
3.   Synaptics TouchPad
This is a driver for mouse. [Mouse property] will show if we do the double clicks on TouchPad icon in tray. You can choose enable/disable internal pointing device when external pointing device is attached. This is brilliant. A tough guy (like me…HA! HA!) didn’t like to play game with touchpad. Because the character in game will be weak and slow if I control it by touchpad. Of course, I need the external mouse all the time and don’t want the interference from touchpad.
4.   System Control Manager (SCM)
We can enable/disable the WLAN/BT/camera devices by SCM. Besides, it can control the display brightness, volume, screen on/off and ECO. ECO is special mode for gaming watching movie.
5.   Sound Blaster CINEMA
Sound Blaster CINEMA is come from an old school audio company – CREATIVE. The software can adjust the surround sound easily. We also can adjust 5.1/7.1 surround sound for the internal speakers and external headphone. That is great, isn’t it?
Besides, we can also adjust CRYSTALIZER/BASS/SMART VOLUME/digital output by ourselves.
6.   Killer Network Manager
This is a major feature of MSI NB.
In Killer Network Manager, we can set the network priority for each of applications and we also can abandon the connection from malicious software.
[Performance] shows current status of network. We can find out which application occupied the most greedy resources by it.
[Network -> Test Network Speed] will detect the network environment automatically. Furthermore, it will adjust the priority for applications.
[Killer Ethernet] show the LAN connection info.
[Killer Wireless] show the router info.
7.   SteelSeries Engine
This is another major feature of MSI NB
If we do the right click on icon in tray, the menu will show following list. We can select [Launch SteelSeries Firmware Update Tool], [Updates]…and so on.
If we select the [Settings]. It can help us change default language and set application auto running when system power on.
I.   Buttons
Double click to open the SteelSeries Engine. I think it can set 4 different keyboard settings for each of profiles. And it can switch by FN+1~4.
[Keypress Marc] can record what you input. And [Record Delays ] can modify the delay time. HA! No game can block us anymore. Please remember to press the [SAVE] for your setting
[Launch Application] can launch any application immediately. I suggest to set the cold key for this function.
Here is example. I use [PgUp] to quick start the 3D Mark11. See, it will pop up when I pressed [PgUp].
It is simple to use [TextMarco] set our own phrase. Now I become a quick speaker in my team. One key, only one key can help me to type a lot of words.
Are you tired to press some keys that you never want to touch in game (Like WIN KEY)? It is not the problem now. [Disable Key] will do the favor and disable any key which you hate.
II.   [Colors] can change the color of backlight keyboard. Also, you can set different modes (Gaming/Audio…etc) on it.
We can change the color zone. There is not only 4 or 5 colors. The engine provides thousands of colors for us. [Audio mode] is the coolest. It will change colors by itself when we play music by speakers. I like to dance with my keyboard.
III.   We can select different languages by [Settings].
IV.   [Properties] can save our hard works of settings reliably.
V.   If you want to defeat your competitors, it is important to know your enemy. However, It is more important to know yourself. [Statistics] can help us observe which keys are most popular by our fingers.
Right click on [Profile]. It can modify/export/import/delete the profiles.
Mouse can use the same kind of settings as keyboard.
DPI setting for mouse.
Save files.
We can record the mouse, too.
8.   Norton
Norton Internet Security: Anti-Virus software, MSI provides 60 days for free.
Norton Online Backup: Online data backup software, MSI provides 30 days for free.
Norton Anti-Theft: Anti-Theft software, MSI provides 30 days for free.
If you like Norton’s products, you can buy it online.
If you don’t, I believe we can uninstall it directly.
So, the decision is ours.
Introduction from Norton official website
9.   Dragon Gaming Center
I.   System Monitor:
It can monitor CPU/GPU loading and temperature. We also can find the network speed and fan speed in it.
II.   Utility:
You can set your favorite apps in [Add new Utility].
E.g. I added a [MSI Afterburner]. Click [Open] to build the link. Do you feel familiar with something? Exactly, [Launch Application] of [SteelSeries Engine] can do this, too.
III.   Instant Play:
We can define [Fn+F4] to enable the quick start. But there is more secret.
We can also use [Browse] to assign the game which we want.
Click the icon of game and [Fn+F4] will be ready. We can only use 1 program at once.
I usually change the brightness, volume and mouse sensitive before the game. As you know, every games are different. It is sweet because we can use [Apply Setting] to do this.
I can’t believe it. We also can find the clock feature in it. How convenient it is!
IV.   Hybrid Power is another MSI feature.
It can provide the power by AC adapter and battery in the same time. We can monitor the status in here.
10. BurnRecovery
It can create the recovery CD/DVD/USB for MSI NB.
Here can select Recovery disc/USB/ISO.
I will make a ISO file first.
We can select where to put the ISO.
Creating the recovery file...
Finish!
Open the folder and we can find 4 ISO files in it.
Well…[BurnRecovery Help] provide the details spec.
In my opinion, everyone should create their own recovery image. You will need it in one day.
11. Battery Calibration
This is software for battery calibration. In order to keep our battery good, we should do the calibration every three months. Don’t forget to plug-in the AC adapter and battery during the process..
Press [Start] to begin the process. It will make the battery fully charged first.
Then, it will empty the battery like this.
System will shut down after the empty process. At last, fully charged again. It will take 4~5 hrs to complete the process.
12. MSI Dragoon Army /MSI Facebook /Web site /YouTube
Those are MSI forums/Facebook/official website/YouTube and links.
[MSI Dragoon Army] is the official forum for MSI. We can find NB, MB and AIO info in it.
Facebook Quick Link for many countries of world.
MSI official website
YouTube channel of MSI.
13. Super-Charger
There is no message when I click this app at the first time. But when I attached my IPAD, it pops up the [Super-Charger]. It is amazing because IPAD can’t be charge by this USB port. As far as I know, the USB 3.0 only provides maximum 900mA for its device. IPAD will need 2.1A for charge process. I have no idea how MSI NB make IPAD charging okay.
14. XSplit GameCaster
This is one of important features. I saw many different first class gaming machines this year. All of them have the broadcast software. (Like PS4, Xbos ONE)
It can switch the default language after we login.
Twitch/YouTube / Facebook/ Twitter/Google+ can be used by [Accounts]. It is easy to start the live show.
We can modify the resolution and use twitch by [Setting]
We can configure FPS/CPU loading/where to show on display by [Status label].
Hotkey configuration.
Videos storage.
Press [Ctrl+Tab] to call Gamecaster in game. And we can twitch or modify setting. I will provide my gaming video for you later.
15. Power DVD
This is a famous video player. Also, it can support BD format.
We can use the [Setting] to change our language.
We can change 5 times for default country .
It is glad that I’ve finished the introduction of GT70 software.
Performance report:
Um…Now is late at night. I should go to my lovely bed. Following is the testing report for the reference.
1.   FurMark
1920*1080, 15 minutes.
2.   AIDA 64
CPU and GPU stress testing, 30 minutes.
3. 3D Mark 11
4. 3DMark Vantage
5.   3DMark 2013
6.   Heaven Benchmark 4.0
7.   CINBENCH 11.5
8.   FINAL FANTASY XIV Benchmark
9.   PCMARK 7
10.   HD Tune Pro 5.50
11.   AS SSD Benchmark
12. Crystal Disk Mark
I didn’t forget my promise. Here is my gaming videos
http://youtu.be/tCd5Lnj2U0I

Editors' Choice Award. Good job MSI !!
http://www.computershopper.com/laptops/reviews/msi-gt70-dominator-893#review-body

How to open a popup win within a PDF file (c:\test.pdf) as Column Link

I have a interactive report based on a Table (EMP). I need to create a column link that opens a pdf file within the employee curricula
All the curriculum are stored in a windows folder, and in the EMP table there is a field named PATH containing the full path name.
Thxs,
Giuseppe.

Hello, Sebastian
I've tested your suggestion and in effect it works.
I think is good solution if the files are readonly (pdf, images, etc).
In my case the files are updatable by the end user.
Consider that I'm using the following configuration:
APEX 4.0, DB 11.2.0.1 and EPG
This means that:
a. All the files need to be loaded in the XML_DB via PL/SQL or via WebDAV (let's say in... /i/mydocs)
b. When the end user opens the file via the "Column link" this is read-only in the browser, to modify it, the end user need to save updated version in (/i/mydocs), replacing the existing ones, .. and this is a bit complicated .
Any other suggestion will be appreciate.
Regards,
Giuseppe.

I "upgraded" to FF4, now it doesnt work properly, wont open pages, will open blank tabs when i click on a link, tried to go back to the older one but that doesnt work now either, have tested it with Safari and it opens everything fine. Any ideas?

After upgrading to firefox 4 im now having a lot of problems using the browser.
if i try an open a link in a new tab it will just open up a blank tab, if i click on links or even type in the google search bar at the top it doesnt do anything, it just says "done" and the circle thing stops as if im on the page already, have tested it with Safari doing the same things and Safari works fine. I'd swap but all my bookmarks and passwords are in Firefox so id rather stay with that.
I tried going back to the older version of firefox (3.5 or something) but seems the bugs are here to stay now.......so.......any ideas? because its really annoying, shouldn't have "upgraded".
Is there a new patch coming out anytime soon or should i start getting used to Safari?
Thanks for your help.
Mark Lavery (Melbourne)

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

How can I add/change e-mail account password? How can I test the account?

For several days I have been unable to send or receive messages using Thunderbird. Works OK with another mail client. This problem started right after installing a security update 24.4.0 (20140316131045). I went to Options/Security/Passwords and deleted all the saved passwords. When I try to download messages, however, the system is not asking me to enter a new password. Thunderbird regrettably lacks a "Test" button to test access to the accounts.
Any suggestions?

If you're not being prompted for the password Thunderbird is unable to reach the server.
Verify your firewall settings and make sure Thunderbird isn't blocked.
You can easily verify your password using webmail.

Is there a way to create a database with Test Stand?

Anyone know of a way to have Test Stand create a database? My company standard MS Office suite is Microsoft Access 2010, and TestStand does not support the .accmdb extension type(format), so I have to create new databases using old formats. I'm worried about backwards compatability down the road since good ole Microsoft doesn't seem to care about legacy formats.
I'm still a beginner with databasing, so any suggestions would be greatly appreciated.

TestStand 2012 SP1, and we are using a modified Generic Recordset (NI). The problem we are having right now is that the Build SQL instructions are not creating the database tables the way we are configuring them from the "Statements" and "Column/Parameters" tabs under Database Options.
What is happening is when we validate the schema, and drop all schema tables, it empties all the database tables, but then when you build using the TestStand generated sql file, we get errors(shown below) we are not understanding, and we can no longer write to the database and LabVIEW throws a "Data type mismatch in criteria expression" error like this
"Possible reason(s):
ADO Error: 0x80040E07
Exception occured in Microsoft JET Database Engine: Data type mismatch in criteria expression. in NI_Database_API.lvlib:Conn Execute.vi->TSData - Query Actions.vi->Retrieve Test Data.vi->ARA-63 Data Miner.vi->ARA-63 Data Miner.vi.ProxyCaller"
==================================================================================================== > CREATE TABLE UUT_RESULT ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, STATION_ID VarChar(255), BATCH_SERIAL_NUMBER VarChar(255), TEST_SOCKET_INDEX Long, UUT_SERIAL_NUMBER VarChar(255), USER_LOGIN_NAME VarChar(255), START_DATE_TIME DateTime, EXECUTION_TIME Double, UUT_STATUS VarChar(32), UUT_ERROR_CODE Long, UUT_ERROR_MESSAGE VarChar(255), PART_NUMBER VarChar(255), TSR_FILE_NAME VarChar(255), TSR_FILE_ID VarChar(64), TSR_FILE_CLOSED Bit, PART_NAME VarChar(255), PRG VarChar(255), Comment VarChar(255), Operator VarChar(255)) Command issued.
> CREATE TABLE STEP_RESULT ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, UUT_RESULT Long, STEP_PARENT Long, ORDER_NUMBER Long, STEP_NAME VarChar(255), STEP_TYPE VarChar(255), STEP_GROUP VarChar(32), STEP_INDEX Long, STEP_ID VarChar(32), STATUS VarChar(255), REPORT_TEXT VarChar(255), ERROR_CODE Long, ERROR_MESSAGE VarChar(255), CAUSED_SEQFAIL Bit, MODULE_TIME Double, TOTAL_TIME Double, NUM_LOOPS Long, NUM_PASSED Long, NUM_FAILED Long, ENDING_LOOP_INDEX Long, LOOP_INDEX Long, INTERACTIVE_EXENUM Long, CONSTRAINT STEP_RESULT_FK FOREIGN KEY (UUT_RESULT) REFERENCES UUT_RESULT (ID)) Command issued.
> CREATE TABLE STEP_SEQCALL ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, STEP_RESULT Long, SEQUENCE_NAME VarChar(255), SEQUENCE_FILE_PATH LongText, CONSTRAINT STEP_SEQCALL_FK FOREIGN KEY (STEP_RESULT) REFERENCES STEP_RESULT (ID)) Command issued.
> CREATE TABLE PROP_RESULT ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, STEP_RESULT Long, PROP_PARENT Long, ORDER_NUMBER Long, NAME VarChar(255), PATH LongText, CATEGORY Long, TYPE_VALUE Long, TYPE_NAME VarChar(255), DISPLAY_FORMAT VarChar(32), DATA Double, FORMATTED_DATA VarChar(255), CONSTRAINT STEP_NUMERICLIMIT1_FK FOREIGN KEY (STEP_RESULT) REFERENCES STEP_RESULT (ID)) Command issued.
> CREATE TABLE PROP_NUMERICLIMIT ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, PROP_RESULT Long, COMP_OPERATOR VarChar(32), HIGH_LIMIT Double, LOW_LIMIT Double, UNITS VarChar(255), STATUS VarChar(255), HIGH_LIMIT_FORMATTED VarChar(255), LOW_LIMIT_FORMATTED VarChar(255), CONSTRAINT STEP_NUMERICLIMIT2_FK FOREIGN KEY (PROP_RESULT) REFERENCES PROP_RESULT (ID)) Command issued.
> CREATE TABLE PROP_RESULT ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, STEP_RESULT Long, PROP_PARENT Long, ORDER_NUMBER Long, NAME VarChar(255), PATH VarChar(255), CATEGORY Long, TYPE_VALUE Long, TYPE_NAME VarChar(255), DISPLAY_FORMAT VarChar(32), DATA VarChar(255), FORMATTED_DATA VarChar(255), CONSTRAINT PROP_MULTINUMERICLIMIT1_FK FOREIGN KEY (STEP_RESULT) REFERENCES STEP_RESULT (ID), CONSTRAINT PROP_MULTINUMERICLIMIT1_FK FOREIGN KEY (PROP_PARENT) REFERENCES PROP_RESULT (ID)) Command failed with the following error...: Table 'PROP_RESULT' already exists. (-2147217900)
> CREATE TABLE PROP_NUMERICLIMIT ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, PROP_RESULT Long, COMP_OPERATOR VarChar(32), HIGH_LIMIT Double, LOW_LIMIT Double, UNITS VarChar(255), STATUS VarChar(255), HIGH_LIMIT_FORMATTED VarChar(255), LOW_LIMIT_FORMATTED VarChar(255), CONSTRAINT PROP_MULTINUMERICLIMIT2_FK FOREIGN KEY (PROP_RESULT) REFERENCES PROP_RESULT (ID)) Command failed with the following error...: Table 'PROP_NUMERICLIMIT' already exists. (-2147217900)
> CREATE TABLE PROP_RESULT ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, STEP_RESULT Long, PROP_PARENT Long, ORDER_NUMBER Long, NAME VarChar(255), PATH VarChar(255), CATEGORY Long, TYPE_VALUE Long, TYPE_NAME VarChar(255), DISPLAY_FORMAT VarChar(32), DATA VarChar(255), FORMATTED_DATA VarChar(255), CONSTRAINT PROP_RESULT_FK FOREIGN KEY (STEP_RESULT) REFERENCES STEP_RESULT (ID)) Command failed with the following error...: Table 'PROP_RESULT' already exists. (-2147217900)
> CREATE TABLE PROP_ANALOGWAVEFORM ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, PROP_RESULT Long, INITIAL_T DateTime, DELTA_T Double, INITIAL_X Double, DELTA_X Double, UPPER_BOUNDS VarChar(32), LOWER_BOUNDS VarChar(32), DATA_FORMAT VarChar(32), DATA LongBinary, ATTRIBUTES LongText, CONSTRAINT PROP_ANALOGWAVEFORM_FK FOREIGN KEY (PROP_RESULT) REFERENCES PROP_RESULT (ID)) Command issued.
> CREATE TABLE PROP_DIGITALWAVEFORM ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, PROP_RESULT Long, INITIAL_T DateTime, DELTA_T Double, UPPER_BOUNDS VarChar(32), LOWER_BOUNDS VarChar(32), TRANSITIONS LongBinary, DATA LongBinary, ATTRIBUTES LongText, CONSTRAINT PROP_DIGITALWAVEFORM_FK FOREIGN KEY (PROP_RESULT) REFERENCES PROP_RESULT (ID)) Command issued.
> CREATE TABLE PROP_ANALOGWAVEFORM ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, PROP_RESULT Long, INITIAL_X Double, DELTA_X Double, UPPER_BOUNDS VarChar(32), LOWER_BOUNDS VarChar(32), DATA_FORMAT VarChar(32), DATA LongBinary, ATTRIBUTES LongText, CONSTRAINT PROP_IVIWAVE_FK FOREIGN KEY (PROP_RESULT) REFERENCES PROP_RESULT (ID)) Command failed with the following error...: Table 'PROP_ANALOGWAVEFORM' already exists. (-2147217900)
> CREATE TABLE PROP_ANALOGWAVEFORM ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, PROP_RESULT Long, INITIAL_X Double, DELTA_X Double, UPPER_BOUNDS VarChar(32), LOWER_BOUNDS VarChar(32), DATA_FORMAT VarChar(32), DATA LongBinary, ATTRIBUTES LongText, CONSTRAINT PROP_IVIWAVEPAIR_FK FOREIGN KEY (PROP_RESULT) REFERENCES PROP_RESULT (ID)) Command failed with the following error...: Table 'PROP_ANALOGWAVEFORM' already exists. (-2147217900)
> CREATE TABLE PROP_BINARY ( ID COUNTER CONSTRAINT TABLE_CONSTRAINT PRIMARY KEY, PROP_RESULT Long, UPPER_BOUNDS VarChar(32), LOWER_BOUNDS VarChar(32), DATA_FORMAT VarChar(32), DATA LongBinary, CONSTRAINT PROP_BINARY_FK FOREIGN KEY (PROP_RESULT) REFERENCES PROP_RESULT (ID)) Command issued.

Write a progarm to test two parts at the same time

Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012

From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments

How to load Test data from a Text file in ECATT

Hi,
I have created a test configuration with a test script, system data container, and test data container.
I have done the recording of a transaction and created the script. Parameterization is done for the script and have imported those parameters from script in to the data container.
I am trying to load a the data from a text file on the local work-station. The data is not being read.
Please explain this in detail (step by step) as I am very new to ECATT.
I am trying this on SAP ECC 6.0 IDES server.
Thanks in Advance
Vikas Patil

Please explain this in detail (step by step) as I am very new to ECATT.
Thanks in Advance
Vikas Patil

Using a variable in Spry conditional tests included in a Spry Tooltip

I have the following code:
<div spry:region="company" id="tooltip">
<div spry:repeat="company" spry:choose="spry:choose">
<div spry:when="'{name}'==memberName">
<table>
<tr>
<td
align="center"><h2>{name}</h2></td>
</tr>
<tr>
<td align="center"><img src="{headshot}"
alt="{name}" width="227" height="350" /></td>
</tr>
<tr>
<td align="center">{description}</td>
</tr>
</table>
</div>
</div>
</div>
<script type="text/javascript">
var tooltip_trigger_one = new
Spry.Widget.Tooltip("tooltip","#trigger", {showDelay: 200,
hideDelay: 200, offsetX: 250, offsetY: 200} );
</script>
where the variable "memberName" is set elsewhere to a value
that matches one of the occurrences in the column "name" in the
dataset "company". I can see, using debugging tools, that the
variable is being set correctly. But.... when the tooltip is
triggered, only a small few-pixel square box opens up.
If, instead of using the variable "memberName" in:
<div spry:when="'{name}'==memberName">
I use a string, as in
<div spry:when="'{name}'=='John Doe'">
then the code works correctly and I get a large tootlip
showing me the correct information for that member of the company.
I have tried different tests (spry:if and spry:test for
instance), tried various combinations of quotes and parenthesis and
tried placing the code at various places both inside and outside of
the <body> -- but always get the same results.
Is it not possible to test against a variable or am I doing
something else incorrectly?
Thanks,
Janet

OK.... some progress to report.
I was setting memberName onmouseover-- which is also the
trigger for the tooltip-- thusly:
<p><em onmouseover="memberName='John Doe'"
id="trigger">John Doe</em></p>
It seems that the variable is being set, but too late, as the
trigger has already caused the div... id="tooltip"> to be
evaluated with "memberName" not equal to any of the names in the
dataset. I tried using a function call to set "memberName" and
tried putting the onmouseover in the <p> tag and leaving the
trigger id in the <em> tag. but neither of those appear to
change the outcome. "memberName" still appears to be set to the
value I initialized it to up the the <head> section at the
time the tooltip <div> is evaluated. Although it is set
correctly if I check it's value using Firebug after I have
mouse-overed it.
Incidentally, using a Firebug breakpoint just before the
<div spry:when...> and checking the value of memberName was
how I discovered that "memberName" still seemed to have a value of
"initialized" which is what I set it to up in the <head>
section.
Having written all of this, I am wondering though, shouldn't
the value of "memberName" be equal to "John Doe" the second time I
mouseover it? Or, if there are more than one trigger "names" on the
page, shouldn't "memberName" be equal to the name of the previous
trigger that I moused-over? And with memberName having a legitimate
value at that point, shouldn't the tooltip now show the correct
display information rather than just that little few pixel square
box that I am getting when I mouse-over the trigger name?
Clearly there is something that I just am not understanding.
Janet

Error while generating the report on Test env (for divide condition)

Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advance

Is anyone having any idea about it...

Error while testing a sample web dynpro

Hi All,
When i try to test a web dynpro sample program it gives me below error message "Data no longer available when SALV_WD_TABLE GET_MODEL called ". can you please let me know what the exact problem is?
Thanks,
Mars

HI Deepthi,
I have already done the things mentioned in the thread you have provided but still i get the same error message as shown below:
The following error text was processed in the system ECD : Data no longer available when SALV_WD_TABLE GET_MODEL called
The error occurred on the application server ecddb_ECD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_SALV_WD_COMP_TABLE_IF~GET_MODEL of program CL_SALV_WD_C_TABLE============CP
Method: GET_MODEL of program /1BCWDY/JYCZZVEP6VGSEEQER4SX==CP
Method: IWCI_SALV_WD_TABLE~GET_MODEL of program /1BCWDY/JYCZZVEP6VGSEEQER4SX==CP
Method: WDDOINIT of program /1BCWDY/EPLQDEK9FFWV5CP4BWEF==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/EPLQDEK9FFWV5CP4BWEF==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP

Testing

Similar Messages

Maybe you are looking for