TestLog Not Displayed in Error Reports

Hello,
when I run a load test and errors are produced I am not seeing the "Test Log" in the details section of the error report, I see it occasionally for some errors but not for all the errors.
Has anyone seen this issue before?
Thanks

By default only the logs of the first 200 failing tests are stored. See the "Maximum test logs" property of the run settings.
Clicking on the top of the details column should sort the test details on that column and so bring all the test logs to the top (or bottom, so click again) of the list.
Regards
Adrian

Similar Messages

  • How to not display the error message ?

    hi everybody,
    I would like to know if it is possible to not display the error message in BO XI R2 when I try to refresh my reports ?
    (like "the query bla bla does not fetch any data...")
    Thanks for your help,
    Mario

    I've found this method to not display this error message but  the problem is that the prompt message when you refresh the report are not displayed:
    Has someone an idea ?
    Private Sub Document_BeforeRefresh(Cancel As Boolean)
    Application.Interactive = False
    End Sub
    Private Sub Document_AfterRefresh()
    Application.Interactive = True
    End Sub
    Edited by: Pascolo Mario on Oct 22, 2008 4:35 PM

  • BEx hierarchies not displayed in Crystal report parameters

    Hi All,
    I am trying to using a Bex query that has a cost center hierarchy with a variable that allows users to select specific nodes or even cost centers. In BEx reports, this query works fine and gives the users the view of the cost centres in a hierarchial manner. However, in Crystal reports, the query provides a drop down menu displaying a simple list of all the cost centres (not in a hierarchial manner). This confuses the user as to which element is a node and which is a cost centre
    Kindly suggest how can we achieve the cost centre hierarchy to appear in the parameters in Crystal.
    Thanks

    Hi,
    this is a duplicate to this entry:
    key figures are not displayed in crystal report
    Please do not post the same problem multiple times
    regards
    Ingo Hilgefort

  • Enabled UDF's are not displaying in XL Report Composer.

    Hi,
    I Enabled User Defined Fields (UDF) under manage user defined fields. But itu2019s displaying only Light dimensionu2018s fields. But Dimension attributeu2019s fields are not displaying in XL Report composer. How we can display Dimension attribute fields in XL Report.
    Regds,
    Sampath Kumar.

    Hi,Danie Posthumus
    First of all we are not able to see my User define filed in report composer except for light dimensions type. Only we are getting Light Dimension Data Item type only we are not getting Dimension Attribute Data item type.
    Regds,
    Sampath Kumar Devunuri.

  • About display driver error report

    My operating system is windows 07. I have pentium 4 intel prosessor and motherboard is p pavilion 06 asteron. when i'm working the display shut for a moment and displays the display driver error report that "display driver stopped responding, has been solved". the display driver is ATI RADEON EXPRESS 200 series. if the matter with display driver how can i get proper one.

    Hi again dasuncj,
    Thank you for the quick reply!
    So that I can better diagnose the error message with your specific brand of HP Pavilion 06, I will need to know both the model and product number. This can be found by using this video below:
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • 0.00 is currency not displaying in ALV REPORT......

    Hi All,
    There is a currency field in the internal table which is not displaying only value 0.00 if the value is 0.03 then it is displaying in ALV.
    I have checked the Internal Table passed in the FM: REUSE_ALV_LIST_DISPLAY but it is carrying the value 0.00. But while displaying it is not displaying in the report.
    I have also checked the Field catalogue there is no such conditions mentioned.
    Kindly help me.
    Thanks in Advance.
    MP

    Hi MP,
    while handling witht eh currency fields make sure that the following are taken care of
    in the field catalog use:
    gs_field-datatype = 'CURR'.
    gs_field-inttype = 'C'.
    also the following
    fieldcatalog-no_zero = 'X'. should be taken care of otherwise it will not display the zeros appearing in the final internal table for ALV display.
    Hope its helpful
    Thanks,
    Srikanth.P

  • Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

    Hi,
       I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
    can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
          CLASS lcl_report DEFINITION
    CLASS lcl_report DEFINITION.
      PUBLIC SECTION.
        METHODS:
          display  IMPORTING l_table  TYPE string
                             l_fcat   TYPE string.
    ENDCLASS.                    "lcl_report DEFINITION
          CLASS lcl_report IMPLEMENTATION
    CLASS lcl_report IMPLEMENTATION.
      METHOD display.
        DATA: gr_table   TYPE REF TO cl_salv_table.
        DATA: gr_columns TYPE REF TO cl_salv_columns_table,
              gr_column  TYPE REF TO cl_salv_column_table,
              ls_fcat    TYPE slis_fieldcat_alv.
        DATA: gr_display TYPE REF TO cl_salv_display_settings.
        DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
              l_field    TYPE string.
        FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                        <ft_fcat>     TYPE STANDARD TABLE.
    Get the ALV object refering to the output table
        ASSIGN (l_table) TO <fs_table>.
        ASSIGN (l_fcat)  TO <ft_fcat>.
        TRY.
            cl_salv_table=>factory(
              IMPORTING
                r_salv_table = gr_table
              CHANGING
                t_table      = <fs_table> ).
          CATCH cx_salv_msg.                                "#EC NO_HANDLER
        ENDTRY.
    Add basic default functionality in the ALV report
    Functions
        l_o_functions = gr_table->get_functions( ).
        l_o_functions->set_all( abap_true ).
        gr_columns = gr_table->get_columns( ).
        gr_columns->set_headers_visible( abap_true ).
    Display the list
        gr_table->display( ).
      ENDMETHOD.                    "extract
    ENDCLASS.                    "lcl_report IMPLEMENTATION
    *& start-of-selection declaration
    START-OF-SELECTION.
      PERFORM :
      get store codes
        get_storecodes    USING      p_stfile
                          CHANGING   it_t001w,
      fetching mard data
        read_mard_data,
      preparing fieldcatalog for Final Data
        create_filedcat   USING      it_t001w
                                     it_site
                          CHANGING   it_fieldcat,
      preparing structure & internal table for Final Data
        create_final_table_structure  USING  it_fieldcat,
      prepare output data
        prepare_final_data.
    *& end-of-selection declaration
    END-OF-SELECTION.
      PERFORM :
      display data
        display_data    USING l_table
                              l_fcat.
    *&      Form  get_storecodes
    FORM get_storecodes  USING    p_p_stfile
                         CHANGING p_it_t001w  LIKE it_t001w[].
      DATA  :
    internal table for RAW
      lt_raw    TYPE truxs_t_text_data,
      rs_site   LIKE LINE OF rt_site,
      l_index   LIKE sy-tabix.
      FIELD-SYMBOLS :
    field symbol for it_t001w
      <fs_t001w>   LIKE LINE OF p_it_t001w.
    calling function module to get Stores Data from File
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_line_header        = 'X'
          i_tab_raw_data       = lt_raw
          i_filename           = p_p_stfile
        TABLES
          i_tab_converted_data = p_it_t001w[]
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      SORT p_it_t001w BY werks.
      CLEAR rs_site.
      rs_site-sign   = 'I'.
      rs_site-option = 'EQ'.
      rs_site-low    = p_dccode.
      APPEND rs_site TO rt_site.
      IF it_t001w[] IS NOT INITIAL.
        LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
          l_index   = sy-tabix.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input  = <fs_t001w>-werks
            IMPORTING
              output = <fs_t001w>-werks.
          MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
          IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
          append site to ranges
            CLEAR rs_site.
            rs_site-sign   = 'I'.
            rs_site-option = 'EQ'.
            rs_site-low    = <fs_t001w>-werks.
            APPEND rs_site TO rt_site.
            CONTINUE.
          ENDIF.
        ENDLOOP.
        SORT p_it_t001w BY werks.
        SORT rt_site.
      ENDIF.
    ENDFORM.                    " get_storecodes
    *&      Form  create_final_table_structure
    FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                    p_it_site       LIKE it_site[]
                           CHANGING p_it_fieldcat   LIKE it_fieldcat[].
      FIELD-SYMBOLS :
    field symbol for p_it_t001w
      <fs_t001w>     LIKE LINE OF p_it_t001w,
    field symbol for p_it_site
      <fs_site>      LIKE LINE OF p_it_site.
      DATA :
    fieldname
      l_fieldname    TYPE slis_fieldname,
    workarea for site ranges
      rs_site        LIKE LINE OF rt_site.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = p_dccode.
      PERFORM
    prepare fieldcatalog
      build_fieldcatalog USING :   'MTART'      'CHAR'        '5'  ,
                                   'MTBEZ'      'CHAR'        '25' ,
                                   'MATKL'      'CHAR'        '6'  ,
                                   'WGBEZ'      'CHAR'        '20' ,
                                   'MATNR'      'CHAR'        '18' ,
                                   'MAKTX'      'CHAR'        '30' ,
                                    l_fieldname 'CHAR'        '17' .
    create header for excel
      PERFORM create_excel_header USING  : 'Division',
                                           'Divsion Description',
                                           'MC Code',
                                           'MC Description',
                                           'Article',
                                           'Article Description',
                                            l_fieldname.
    loop for creating fieldcatalog
      LOOP AT it_site ASSIGNING <fs_site>.
        READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                                  BINARY SEARCH.
        IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
           <fs_site> IS ASSIGNED  AND <fs_site>-stock GT 0.
          CLEAR : l_fieldname, rs_site.
          l_fieldname    = <fs_site>-werks.
        prepare fieldcatalog
          PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
        create header for excel
          PERFORM create_excel_header USING  l_fieldname  .
          CONTINUE.
        ENDIF.
      ENDLOOP.
      l_fcat  = 'it_fieldcat[]'.
    ENDFORM.                    " create_final_table_structure
    *&      Form  build_fieldcatalog
    FORM build_fieldcatalog  USING    p_fieldname      TYPE slis_fieldname
                                      p_datatype       TYPE datatype_d
                                      p_length         TYPE intlen.
      DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
      CLEAR  : ls_fieldcat.
      ls_fieldcat-fieldname   = p_fieldname.
      ls_fieldcat-datatype    = p_datatype.
      ls_fieldcat-intlen      = p_length.
      APPEND ls_fieldcat TO it_fieldcat.
    ENDFORM.                    " build_fieldcatalog
    *&      Form  create_final_table_structure
    FORM create_final_table_structure  USING    p_it_fieldcat.
    Create dynamic internal table and assign to FS
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = it_fieldcat
        IMPORTING
          ep_table        = t_table.
      ASSIGN t_table->*  TO <ft_final>.
    ENDFORM.                    " create_final_table_structure
    *&      Form  create_excel_header
    FORM create_excel_header  USING    p_p_fieldname.
      DATA : ls_header  LIKE LINE OF it_header.
      CLEAR ls_header.
      ls_header-col_name  = p_p_fieldname.
      APPEND ls_header TO it_header.
    ENDFORM.                    " create_excel_header
    *&      Form  prepare_final_data
    FORM prepare_final_data .
      DATA          : l_matnr       LIKE g_matnr,
                      l_werks       LIKE g_werks,
                      l_index       LIKE sy-tabix.
      FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
    Getting No. of Lines in IT_MARD internal table
      DESCRIBE TABLE it_mard LINES g_lines.
      LOOP AT it_mard ASSIGNING <fs_mard>.
        l_index    = sy-tabix.
        IF l_matnr IS INITIAL.
          l_matnr  = <fs_mard>-matnr.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          UNASSIGN : <fs_value>, <fs_final>.
        Create dynamic work area and assign to FS
          CREATE DATA t_line LIKE LINE OF <ft_final>.
          ASSIGN t_line->*   TO <fs_final>.
          ASSIGN COMPONENT 'MATNR'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_mard>-matnr.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        getting Article Type,MC & its Descriptions
          PERFORM get_other_data    USING     l_matnr
                                              l_werks.
        ELSEIF l_matnr <> <fs_mard>-matnr.
          APPEND <fs_final> TO <ft_final>.
          CLEAR l_matnr.
          l_matnr  = <fs_mard>-matnr.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          UNASSIGN : <fs_value>, <fs_final>.
        Create dynamic work area and assign to FS
          CREATE DATA t_line LIKE LINE OF <ft_final>.
          ASSIGN t_line->*   TO <fs_final>.
          ASSIGN COMPONENT 'MATNR'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_mard>-matnr.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        getting Article Type,MC & its Descriptions
          PERFORM get_other_data    USING     l_matnr
                                             l_werks.
        ELSE.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        ENDIF.
        IF l_index = g_lines.
          APPEND <fs_final> TO <ft_final>.
        ENDIF.
      ENDLOOP.
      l_table  = '<ft_final>[]'.
    ENDFORM.                    " prepare_final_data
    *&      Form  get_other_data
    FORM get_other_data  USING    p_l_matnr
                                  p_l_werks.
      FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                      <fs_t023t>    LIKE LINE OF it_t023t,
                      <fs_t134t>    LIKE LINE OF it_t134t,
                      <fs_makt>     LIKE LINE OF it_makt.
      READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
      IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
        ASSIGN COMPONENT 'MTART'  OF STRUCTURE <fs_final> TO <fs_value>.
        <fs_value>        = <fs_mara>-mtart.
        ASSIGN COMPONENT 'MATKL'  OF STRUCTURE <fs_final> TO <fs_value>.
        <fs_value>        = <fs_mara>-matkl.
        READ TABLE it_makt  ASSIGNING <fs_makt>  WITH KEY matnr =  <fs_mara>-matnr   BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
          ASSIGN COMPONENT 'MAKTX'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_makt>-maktx.
        ENDIF.
        READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl  BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
          ASSIGN COMPONENT 'WGBEZ'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>      = <fs_t023t>-wgbez.
        ENDIF.
        READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart  BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
          ASSIGN COMPONENT 'MTBEZ'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>      = <fs_t134t>-mtbez.
        ENDIF.
      ENDIF.
    ENDFORM.                    " get_other_data
    *&      Form  display_data
          text
    FORM display_data  USING    p_l_table
                                p_l_fcat.
      DATA:
    Variable for Object Creation
      o_report TYPE REF TO lcl_report.
      CREATE OBJECT o_report.
      o_report->display( EXPORTING l_table = p_l_table
                                   l_fcat  = p_l_fcat ).
    ENDFORM.                    " display_data

    I don't know how to read the code you pasted or I would have checked this myself.
    Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
    I made a method inside my local class to add the names:
            call method set_colname
              EXPORTING iv_tab = alv_tab
                        iv_colid = 'xxxx'  "fieldname from the table
                        iv_stxt = text-t54
                        iv_mtxt = text-t55
                        iv_ltxt = text-t55.
    METHOD set_colname .
      data:
              alv_cols type REF TO cl_salv_columns_table,
              alv_col type REF TO cl_salv_column.
      TRY .
    *... Change fieldnames
            call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
            call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
            IF iv_stxt <> ''.
              CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
            ENDIF.
            IF iv_mtxt <> ''.
              CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
            ENDIF.
            IF iv_ltxt <> ''.
              CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
            ENDIF.
       CATCH cx_salv_not_found.
      ENDTRY.
    ENDMETHOD. "set_colname

  • Sub total icon is not displaying in alv report output

    Hi friends ,
    In alv report display on menu bar the icon : subtotals is not displaying at the output , I should not give subtotal in each field catalog .
    Plz give me solution, points will be rewarded.
    with regards,
    prasad.

    Hi,
    I think u r using PF-STATUS parameter in function module,
    if u use this parameter, you sholud give the icon name etc..
    otherwise by default it will appear.
    Check your code again.
    Give me exact requirement, if possible paste the code.
    Regards,
    Chandu

  • Do not display field in report output using ALV

    Hello friends,
    I have a dilemma here. I sorted my report using a dummy field named asset_dum. now, this is my basis of sub totals but I do not need to show it in the display. Is there a way or an option to do this?

    Hi,
    The problem with NO_OUT is that if the user changes the layout he can see the field and there is nothing in the system that would stop him from displaying the same.
    However TECH field should be useful in your case.
    TECH
    If this field is set, the relevant field is not displayed on the list and cannot be shown interactively. The field is only known in the field catalog. (For example, it must not be specified as a sorting criterion).
    Regards,
    Ravi
    Note : Please close the thread if the issue is resolved and mark all the helpful answers

  • ITune is not working, Send Error Report

    before i updated to the newer 7.0.2 iTunes it used to work perfectly fine. Now after i installed it, quick time and iTunes seem to be having a problem. I click on Quick time and it says, Buffer Overrun detected.(then it says my file directory in program files). A buffer overrun has been detetced which has corrupted the programs internal state.The program cannot safely continue execution and must now be terminated.
    Itunes starts up, this agree to liscense agreement pops(sometimes this does not even pop up) up. I check yes and then the iTunes library pops up for about 3-5 seconds. iTunes has encountered a problem and needs to close. We are sorry for the incovenience. (Send error report, Dont send). How do i fix this?

    replying to Duvack
    I click on Quick time and it says, Buffer Overrun detected.(then it says my file directory in program files). A buffer overrun has been detetced which has corrupted the programs internal state.The program cannot safely continue execution and must now be terminated.
    the QuickTime problem will probably be causing your itunes problem. (itunes needs a properly functioning QuickTime in order to work correctly.)
    let's try swapping out your QuickTime.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

    Hello Experts,
    I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
    For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
    I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
    And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
    And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
    For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
    I am in confusion where the exact issue will be.
    If any body faced this kind of scenario is your project, kindly reply me.
    For any more clarifications i will respond you immediately.
    Thanks,
    SN

    Hi,
    check aggregates,index etc for cube
    check key figure selection as well in Multiprovider for respective Infoprovider
    just create test query on Infoprovider and then on Multiprovider and see..
    Check RSRT - regenerate the query
    also see there are various options like execute+debug has ....just check them
    Thanks and regards
    Kiran

  • Amounts not displayed correctly in reporting

    Hello,
    We are facing a problem with data displayed in a created workbook. Amounts are multiplied by 100000.
    We have loaded via file into BPC NW, and the information that is stored in the cube is 1.00000 (with 5 decimals), but what is displayed in the report 10,000.00 u2013 so it is reading the information as it is in the cube and putting two decimal places, which is not correct.
    We have been checking in the Application Set and the Application parameters, but could not any related parameter to set this property.
    I have been looking note 1231909, but does not apply to our case; our flat file does not contain thousands separators.
    Could someone help with this issue?
    Thanks&Kind regards,
    Begonia

    HI,
    Not sure if I got your query correctly. But in general when you load an amount lets say 1500 from a flat file, the format in which this 1500 gets store in the cube is 1.500 (in the cube the decimal digits appear after a 'comma' ) ... And in your report in BPC this same value appears as 1,500 ... I think the decimal places can be removed from the workbook by formating the cell to not show the decimal values.
    Hope this helps.
    Thanks,
    Prasanth.

  • Arabic Numerical font is not display in PDF report output

    I am facing an issue with Arabic Numerical font, If Query the data from form it is displaying Numeric data in Arabic font, If run a report for same data it is display in Normal format[Arabic font is not displaying].
    The below settings i had done
    1. I added font path to REPORTS_PATH
    2. Set the NLS_LANG
    3. I set font aliases properly in unifont.ali
    4.REPORTS_ARABIC_NUMERAL=CONTEXT
    5.REPORTS_BIDI_ALGORITHM=UNICODE
    Oracle Reports Developer 10.1.2.3
    NLS_LANG=AMERICAN_AMERICA.AR8ISO8859P6;
    REPORTS_PATH=$ORACLE_HOME/forms/custom:$ORACLE_HOME/guicommon/tk/admin:$ORACLE_HOME/bin:$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/samples/demo:$ORACLE_HOME/reports/integ:$ORACLE_HOME/reports/printers:${REPORTS_PATH}; export REPORTS_PATH
    [ PDF:Subset ]
    Arial..... = "arial.ttf"
    Arial...Bold.. = "arialbd.ttf"
    Arial..italic... = "ariali.ttf"
    Arial..italic.Bold.. = "arialbi.ttf"
    Tahoma..... = "tahoma.ttf"
    Can any one Please help me to fix this Issue.
    I search lot of sites and blogs but one gave any solution for this problem.
    Excepting Positive reply's
    Regards,
    Avinash

    Hi, check this two link...
    1. Re: PDF Reports in Unicode / Arabic & English
    2. http://www.orafaq.com/forum/t/162197/149761/
    Hope this helps
    If someone response is correct or helpful, mark it.

  • Error Message not displaying full error msg in screen

    Hi Frds,
    Need to display the error message as my specified words.... . I have created a message class also... even though its not displaying mesage properly
    My Message i passed here . R&D Material already exists.........

    Hello Kabil,
    If you use '&' then your message will be truncate in Status bar message. Best option would be use 'and' instead of '&' the your problem will be resolved.
    Cheers,
    Vadamalai A

  • Detail sections not displayed with Crystal Reports 2010 Runtime (SP1 also)

    I have migrated a VB app from RDC 9 to Crystal Reports 2010 and I'm experiencing a very strange issue.
    In a report with 6 nested groups, the detail part is splitted in 7 section, and the whole detail has the "keep together" flag activated. At runtime, some detail sections are not displayed. There is no suppress condition on the detail section. The missed sections are those near bottom of the page. I suppose that when there is no room to print the section on the page and it should go on the next page, Crystal forget to display it.
    I exported the report in Crystal format and reopened with Crystal Reports designer and the missed section are displayed.
    The same report is displayed correctly using RDC 9.
    If I show the group tree and select the missed section group, the section is correctly displayed on a separate preview page.
    I've some screenshot to better demonstrate the problem.
    I hoped SP1 will resolve the issue but unfortunately it didn't.
    Pier Alberto Guidotti

    This issue has been escalated for a fix. tracking number is TE5000325237. For anyone wanting to attach to this thread with a similar issue, please note the behavior as decribed in the TE below. If the description does not match your issue exactly, please create a new thread.
    Description - Steps to Reproduce;
    1) Run the report in the CR 2008 designer - note the second page
    2) Run the report in VS2010 app using CRVS2010 SP1:
    CrystalReportViewer1.ReportSource = <path to report>
    3) Look at page 2 and compare to page 2 from the CR2008 designer (also, see attached compare.jpg file which is a screen shot of both views) - note missing group on page 2
    4) Export to PDF, DO, RTF - same issue
    5) Print to printer using the viewer print button - same issue
    6) Same issue print to printer using code:
    Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
    crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
    crReportDocument.PrintToPrinter(1, 1, 1, 2)
            MsgBox("Done")
    7) Same issue print to printer using code:
    Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
    crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
    Dim rcd As ISCDReportClientDocument
            rcd = crReportDocument.ReportClientDocument
            rcd.PrintOutputController.PrintReport()
            MsgBox("Done")
    8) Export to RPT file format - view this export in the CR2008 Designer - report looks as it should
    9) Add report to the .NET2010 project. trying to view the repor tin the .NET2010 IDE results in .NET crashing.
    - Ludek

Maybe you are looking for