Teststand 3.5 deployment error: "Error: The following file(s) could not be copied:"

I am trying to deploy a project in TestStand 3.5 and I am using LabVIEW 8.2.  When I build my project, I always get the following error message "Error: The following file(s) could not be copied:".  Then it lists about 20 VI's that it is apparently unable to copy.  The VI's listed appear to be randomly chosen from the 8 LabVIEW libraries I included in my TestStand workspace file.  What are the possible reasons that TestStand is unable to copy these VI's?
As a side note, I have successfully mass compiled all the VI's without any errors.

Hello Casey,
I have created a new workspace from scratch with some simple VI's that demonstrate the issue.  Please look at the attached folder that includes the code and a text file of the build status log.  This log looks a little different from my original, but it still has the same error.  This code was generated in TestStand 3.5 and LabVIEW 8.2.1.
It appears to give this error on (some) files that have a decimal point in the filename.  This error started occurring when I upgraded from LabVIEW 7.1 to 8.2.
Thank you.
Attachments:
Test 1.zip ‏47 KB

Similar Messages

  • Error Message: The following disk images could not be opened

    When downloading the free trial for CS6 for Mac, I get an Error message stating that "the following disk images could not be opened: Photoshop_13_LS16.dr invalid checksum.
    Please help!!!

    Is there any messages within the Adobe Download Assistant?  This error can happen if you try mounting the DMG before the download is complete.

  • I am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad.  an unknown error occurs (1631).  what do I do??

    am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad.  an unknown error occurs (1631).  what do I do??

    The search bar can be very valuable...........
    In using it, I found out other's have had this issue and it likely means you have a 3G iPad?  If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

  • When trying to sign in to the iTunes store I get the following message, "We could not complete your iTunes Store request. An unknown error occurred (5002). There was an error in the iTunes store. Please try again later."  How do you resolve this?

    When trying to sign in to the iTunes store I get the following message, "We could not complete your iTunes Store request. An unknown error occurred (5002). There was an error in the iTunes store. Please try again later."  How do you resolve this?  Has been going on for days now.

    I started getting this message a couple of days ago.
    Started a thread of my own before I saw your post. https://discussions.apple.com/thread/4660828

  • Has anyone a solution to two update having the following popup-"We could not complete your request.  There was an error in the App store.  Please try again later.?"  I've tried over 4 days without any change.

    Has anyone a solution to two update having the following popup-"We could not complete your request".  There was an error in the App store.  Please try again later.  I've tried over 4 days without any change.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Since downloading Yosmite on my MAC I have not been able to download photos to LR 5. Error message: "the following files were not imported because they could not be read (335).I have been working with several forums and have dtried going into preference

    LR 5 - using it on a MAC-
    Error message: "the following files were not imported because they could not be read (335).
    I have been working with several forums and have tried all recommendations and none have worked.
    I have tried reloading new LR 5 - and it worked for a short time and then stopped.
    Very frustrated that I cannot talk with someone at Adobe.
    The folks that have made recommendations are great but once their suggestions dont work they drop the link,
    Is there someone or someplace I can take my computer to fix this issue.
    It seems to be a problem between LR and Yosemite.

    The permissions have been changed on the destination folder where the photos are to be copied into.
    You must make sure that the permissions are set to Read and Write.
    Or perhaps the destination folder has been changed accidentally to something else, and you need to change it back to whatever it used to be.

  • I get an error message "the following files were not imported because they could not be read (266)..

    I get an error message "the following files were not imprted because they could not be read (266) on Lightroom 4 on my desktop.
    No problems importing the files onto my laptop.  Using a SANDISK card reader and card.  What's going on on the desktop?

    Leanne, check the write pernissions on the folder/drive you are attempting to import into on your desktop. The message usually means "cannot be written" - a not so clear message.

  • Error The following product(s) could not be activated

    Can somebody help me, I received this error while I'm trying to activate the said product.
    NI Product Activation 
    Step 2: Review Your Confirmation 
    Error The following product(s) could not be activated 
    National Instruments is unable to provide activation codes for the following items in your request. Possible causes could include: serial number was not found; serial number was found, but does not match feature/version; serial number is found, but is not yet active. 
    Serial Number Product Version   
    xxxxxxxxx Vision Acquisition 8.6   
    Serial number is not found, is found but does not match feature/version, or is found but not yet active   

    Time to talk to NI.
    Sometimes corporate firewalls can cause problems with activations.

  • When restoring and updating my iPhone I am getting the following message " iTunes could not update to the carrier settings for your iPhone.an unknown error occurred (1630)

    When restoring and updating my iPhone I am getting the following message " iTunes could not update to the carrier settings for your iPhone.an unknown error occurred (1630).can anyone please with a knowledge tell me what I should do please. Thank you

    The search bar can be very valuable...........
    In using it, I found out other's have had this issue and it likely means you have a 3G iPad?  If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

  • How to fix error message "the iTunes update server could not be contatced"

    What is the cause of error message
    "The iTunes update server could not be contacted. Please check your internet connection or try again"
    I have set SSL 3.0 to on
    used the itunes diagnostic to check internet connection and the reoprt is
    Network connectivity
         Network interfaces verified OK
    ITunes Store connectivity
         Internet connectionverified OK
         Secure link to iTunes store failed  Red dot= NOT OK
    deleted the SC file in SC info directory  no success.
    Any Suggestions
    searchin for an answer

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I am having issues with Time Machine. Error message "The backup disk image could not be created.

    Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset  to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
    TM sees it and it is mounted but cannot go any further. HELP?!!!!
    Thanks
    -A

    How should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
    I can usually fix most my comp problems myself, but this new ExHD has stumped me.
    Thanks for your help.
    -A

  • HT3775 I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. I get this error message: The document "ANDREW_McD_MEDIA_VERSION.avi" could not be opened. A required codec isn't available.

    I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade.  Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
    I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.

    Hi,
    I had exactly the same problem & found the answer here  https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie

  • Received error message "the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll.  unable to launch ICloud.  Any suggections?

    received error message  - the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll.  unable to launch iCloud.  Any suggections?

    I had roughly the same error. I fixed it by running the iCloud control panel update from apple software update. The problem cropped up after I ran the most recent iTunes update, I've personally been having issues with iTunes updates being finicky since upgrading to Windows 8.1, I've had to download installers rather than running the update directly through Software Update, so it's possible Apple is not fully addressing compatibility issues for newer versions of Windows. Ultimately it seems to be a missing file issue, so any update, installer, or install verification/repair that directly addresses the iCloud files should see and replace the missing file.
    Also it looks like Apple is either unaware of this problem or not addressing it at all, there are about a dozen support requests from within the last month all asking this same question regarding iCloud, just with different specific files unable to be found. None of them have answers.
    Hopefully this works for you

  • Error 445: The Credential Security Service could not be found:

    Hello,
    We are trying install Adobe LifeCycle Reader Extensions 6.1 on WebSphere 5.1. But when we access the web page: http://hostname:9080/ares, upload a file, click next, web page generate an error:
    An Error Has Occurred
    Error 407: An unexpected internal error occurred: 'java.lang.IllegalStateException: javax.servlet.ServletException: Error 474: The credential permission settings could not be processed: 'com.adobe.solutions.ares.ARESException: Error 445: The Credential Security Service could not be found: 'javax.naming.NameNotFoundException: Context: ISDAPP15/nodes/ISDAPP15/servers/server1, name: /ejb/com/adobe/solutions/credentialsecurity/CredentialSecurity: First component in name CredentialSecurity not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]'.'.'.
    I check Adobe website, there is one article (http://www.adobe.com/support/products/enterprise/knowledgecenter/c4690.pdf). But the solution in this article does not work for me.
    Any help will be appreciated.
    Thanks,
    Grace

    Well ticket system seems slower.
    samsung |
    kadın |
    saç modelleri

  • I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software.  I could not install it.  Where do I go from here?

    I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software.  I could not install it.  Where do I go from here?

    Photoshop 4.0 is not compatible with MAC 10.9.3 . You will face issues as when Photoshop 4.0 was launched there was no MAC Mavericks and Adobe has not tested the version on new MAC OS.
    If you want you can download the latest version of Photoshop CC 2014 and you can use it as a trial for 30 days and you can plan to switch to the latest version.
    http://www.adobe.com/products/photoshop.html

Maybe you are looking for