TestStand Component Locator Database Editor - can't set crosshairs

The help file in the Component Locator Database Editor says
"Select a component from the list. Use the image scrollbars to center the component in the image. Set the magnification with the zoom controls so the details of the image such as the component identifiers are easily visible. Set the mouse cursor on the item in the image and left click. A crosshair will appear on the image at the cursor position and the coordinates and magnification will be entered into the table next to the item. This process may be repeated to re-enter the data."
I can't get this to work. I select the component. I can see the crosshairs at the bottom left of the picture. I can't get the crosshairs to move.
Does this work?

This doesn't sound like National Instruments TestStand, if it's something from Sierra Instruments then you would be better to contact them or the supplier of this equipment.
Regards
Ray Farmer

Similar Messages

Can FCS be set up in multiple offices - Would that be one database or can we synchronize several - I need general architecture concept

Can FCS be set up in multiple offices/locations - Would that be one database or can we synchronize several databases - I need general architecture concept

If you want to link to separated location which are too far from each other to connect via Ethernet or FC you can't. What you can do is build another FCS with a completely independent DB and link both with XML and scripting (or if you have a very good DB knowledge). Other than that you can put the FCS DB in one location and make the clients on the other connect to the first one. But if the issue is to ingest media from both locations to the same DB then you better have a nice and big Ethernet connection between both locations.
Hope this help

How can I set the workgroup templates file location in Office 2013 to point at a folder stored on Sharepoint (2010/2013)?

Hi All,
Been doing quite a bit of research on this but drawn nothing but blanks or alternative suggestions, none of which are viable.
So the outline of the issue:
Deploying Office 2013 suite to organisation and wanting to have custom templates available for users to choose from, but want those templates to be centrally stored and managed on a SharePoint site.
In Word 2013, for example, when you create a new document, you are presented with a page to choose from 'Featured' templates (or blank document)
So, if you wanted to have custom corporate templates, you could modify the file location for work group templates, thus creating a Custom Office Templates folder locally on your PC.
Great. This means when you select 'New' in Word 2013 you can pick from the 'Featured' templates, or the 'Personal' templates area.
However, I have a collection of test corporate templates (for Word, Excel, PowerPoint etc). These are stored on a SharePoint site internally.
If I try to modify the work group templates location in Word 2013 to point towards my SharePoint site (or any HTTP address for that matter) it won't work.
I know that I could point it towards a Network Share location instead, but I don't want to do that.
Is there any way of getting it to point towards a SharePoint site, any way of modifying it? Or perhaps an even better solution that I could use?
Any help, thoughts or ideas would be massively appreciated! And forgive me if any of my logic is off, but it does seem like this should be a straight forward thing to do given that Office and SharePoint are both developed by Microsoft and you
would like to think they would inherently have better links!
NOTE: Going to Office 365 is also not an option either!
Eagerly awaiting an answer from someone incredibly clever!

Hi Tony,
Thanks for your response but this is not what I was looking for.
Those articles relate to setting a default template in a SharePoint document or form library.
I will try to be more concise.
What I want is:
(1) For users to be able to load MS Word 2013 on their laptops/desktops (connected to corporate Wireless/LAN)
(2) Once they have opened MS Word 2013, I want them to be able to choose a template from the welcome screen. (There are MS Word Defaults like 'Blank Document' or 'Cover Letter' etc)
I want to add a second tab which is called 'Personal' or 'Corporate'.
(3) MS Word 2013 allows you to create custom WORD templates and save them locally on your machine (either in the default location for templates, or a user-specified custom location (e.g. My Documents, Desktop etc).
(4) In advanced settings, there is an option to modify file locations. This is where you can point MS Word 2013 towards the folder (locally) that contains the personal templates that you have designed which you want to use.
(5) QUESTION: Is there a way to have lots of corporate WORD templates (perhaps one for Marketing, Sales, Procurement, Project etc) - Basically LOTS of different templates all stored in one location on SHAREPOINT, or in a SharePoint document
library. THEN... once those templates (documents) are stored on SharePoint,
IS THERE A WAY to go back into the advanced settings within MS WORD 2013 and modify the file location for templates so that it points towards the SharePoint document library?
I want all the templates to open in MS Word 2013, not within a browser, and I don't want users to have to go to SharePoint to find a template, I want it to be integrated into their local MS Word 2013 so they can choose a corporate template the moment they
load up MS Word 2013.
When I have tried to modify the custom file location for templates, I can only set it to an address locally on my machine, or a network address (mapped network drive).
However, I do not want the templates to be stored on a shared network folder, I want them to be in a SharePoint Document Library.
The issue I have found is that I cannot enter a SharePoint Library URL as my file location, nor can I enter any HTTP address.
IS THERE A WAY AROUND THIS?

How can i set a image dinamically in a image component (ADF Mobile)?

Hello everybody,
I have to consume a rest service and get a url. This url is redirected to one image. After reading this image, how can i set he in a adf mobile image component?

Hi,
bind the mobile image component URL to a managed bean and have the managed bean. Then use the bean setter to set a new URL string and ensure (when creating the Java class for the managed bean) you have JDeveloper creating the property change event handlers.
Frank

How can I set the data binding between Web Dynpro & Database table

Dear friend,
I am a beginner of Web Dynpro. I want to develop my simple project like these:
1. Create my own database table via Dictionary Project such as TAB_USER and have 3 fields: USER_ID, USER_NAME, USER_POSITION and I have already deployed & archived it.
2. Create my own Web Dynpro Project, and create the input fields as User ID, User name, User position and icon 'Save' on the selection screen and I have deployed it already.
For the process, I want to input data at the screen and save the data in the table, please give me the guide line like these:
1. How can I set the data binding between Web Dynpro and Database table ?
2. Are there any nescessary steps that I will concern for this case?
Sorry if my question is simple, I had try to find solution myself, but it not found
Thanks in advances,
SeMs

Hi,
You can write your own connection class for establishing the connection with DB.
Ex:
public class ConnectionClass {
static Connection con = null;
public static Connection getConnection() {
try{
Context ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("jdbc/TSPAGE");
con = ds.getConnection();
return con;
}catch(Exception e){
return null;
You can place the above class file in src folder and you can use this class in webdynpro.
You can have another UserInfo class for reading and writing the data into the DB .
Regards, Anilkumar
PS : Refer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/simple java bean generator for database.pdf
Message was edited by: Anilkumar Vippagunta

Can we Set the Default SAP Component while Creating Support Message

Hi Friends,
I Have got requirement like, when we create the support desk message from any application system by default the sap component should get selected which we have determined in Solman.Our Business secnario is too complex user give create the support message without giving the Sap Component or they give wrong sap Component, so we want to set the sap component get selected by default while creating the support desk message, guide me in solving this issue.
Regards
Charan

I think your logic is reversed. I think it's better to let users create messages from the application areas from which they are having the problem. Based on the standard SAP component which defaults into the component field, the ticket can be routed to one of your 20 teams. This is where the agent detemination rule for support team can be configured. There are a number of message on the forum regarding support team configuration. This way, if your 20 teams can't solve the problem (for example SAP defect) then the message can be forwarded directly to SAP using the correct component. Good luck.

Where can i set the location of the LogonTicket cookies in the visual admin

hello:
where can i set the location of the LogonTicket cookies in the visual administrator?
thanks!!

Hi,
When the SAP LOGON ticket Expired or if we need to update the dates, it is generally done at the Visual Administration Level. SAP Logon Ticket is represented as cookie in the Browser which will help us for SSO.
In Visual Admin under keystore admin where our Old Portal certificate exists.
We will need to delete the old portal certificate, then we need to generate new ceritificate and a pop box will appear.. where we need to provide our System details like SID, Client. After these details are given we can get a new certificate in which validity period dates are automatically generated. And also we can import teh same into Portal at Sys Admin->sys config->key store admin for it to be available as .PSE or .DER file for SSO.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/59bba290-0201-0010-468b-cd12efda573a
check the above for EP security guide which might help you in the same.
Regards,
Ravi

How can I set the field ICt in component table of the Tasklist as "Input" ?

Hi experts,
How can I set the field ICt (BOM's Item Category (POSTP)) in component table of the Tasklist as "Input" Status (The system is in gray now).
I can define the different Category value by IB01 or IB02,then I can select them at the Tasklist's component table.But sometimes I need batch input such as LSMW,so pls kindly tell me how to setup it,thanks!
Yinjun

Hi,
BOM is created with some component and item category.
In task list when you go to component, in normal case one selects and copies BOM over there by clicking component selection button.
Once BOM is copied over there the BOM item category will get copied. As it is BOM item category in Task list it is greyed and it will get copied automatically from BOM.
You specify item category required by you in IB01 or IB02 and then use that BOM in task list. Go to componenet tab and click component selection button. Once BOM is copied over there the BOM item category will get copied

HT5429 How can I set back phone settings to go from a searched location in safari to apple maps rather than google directions?

How can I set back phone settings to go from a searched location in safari to apple maps rather than google directions?

Click Here enter destinations, link to page in iWeb or iFrame it by clicking on "Link to Page" from Google map. This may seem ironic but if you are looking for something the best way to find it is by searching Google. For instance Googling "google map directions" will send you to referenced page. for a sub-$20 app I find it hard to believe you find it hard to believe Apple hasn't integrated this feature into the software.
Hope that helps!

How can I set PCTUSED and PCTFREE in Warehouse databases?

Hi,
There are many Schemas in our database and some are used for OLTP and some others are used for Warehouse. Also our tablespaces are Local Managed.
Could you help me please how can I set PCTUSED and PCTFREE for Warehouses and OLTP.
What are your suggestions? What should be optimum?
DB version is 9.2.0.8.
thanks & regards

If you are using locally managed tablespaces with ASSM then the pctused parameter would no longer apply. In all cases dictionary vs locally managed with or without ASSM you should set pctfree based on how much of the data row column values are present at initial row insertion and how likely any column is upated to a larger size after initial row insertion.
In a warehouse I would expect most of the tables to have 100% of the row data present at initial insert and for the data to never be updated. For tables meeting this requirement a pctfree of 3 - 5% would likely be a good choice. I never like to use 0% since the day may come when you add another column to the table.
With OLTP tables the ideal pctfree value varies more from table to table. Most table so seem to work well enought with the default 10% but I have seen tables that need 50% pctfree to prevent row migration since only the key column values existed at initial insert and most all the other column data was added later.
Where ASSM is not in use I like to set pctused to 95 - pctfree. Over the last 15 years I am not sure I ever found a need to change the pctused from this once set. I have set a lot of tables up over the years from the old default of 40% to use 60% and 80% before resetting everything during a server platform migration as I mentioned above.
HTH -- Mark D Powell --

Can I set autoSubmit="true" and partial trigger in Application Def. Editor?

Hello Expert,
Can I set autoSubmit="true" and partial trigger or other properties through JHeadstart Application Definition Editor?
If I have changed the layout or add item though the Def. Editor, I have to regenerate and the manually modification
on jsff will be overridden. Any suggestion to solve this problem?
So far I know the page generation can be disabled, however, what if I have to regenerate the definition but want
to remain the manual modification in Jsff?
Thanks
Neon

Neon,
You can use the "Depends on Item" property in the application definition editor. You can set this property on an item, or an item region, region container.
The items that is specified as depends on item, will get autoSubmit="true" and the dependent items of region will get partial triggers that listen to the depends on item.
Even if you need settings you can't generate, there is no need to switch off generation of the entire page.
We never do this, we always specify custom templates for the bits and pieces of the page that we want to customize.
Have you read section 4.7 "Customizing Using Generator Templates" in JHeadstart Developer's Guide?
Steven Davelaar,
JHeadstart team.

HT4061 i had my ipad stolen on monday. I set it to remote wipe when next switched on. It came on yesterday and was wiped, but it did not tell me its last location. How can I find this out.

i had my ipad stolen. I set it to remote wipe when next switched on. It came on yesterday and was wiped, but it did not tell me its last location. How can I find this out.

I beive that its too late now if the iPad has been wiped. The means of communicating with the device has been reset so there's no talking to it now.

How can I set my database instance to start in OPEN mode after my computer

Hi all,
Sometime, I have to reboot my computer. After it rebooted, my instance is automaticaly executed. But, my database is not set to the OPEN mode (automaticaly). On some development computers, my status is set to OPEN after a reboot. On some computers, the local database is set to the IDLE instance.
How can I set my database instance to start in OPEN mode after my computer has rebooted?
Thank your for any help.

but i could not run command emctl start dbconsolor lsnrctl..
What error you are getting? If you are not able to run both of them then the ORACLE_HOME is not set properly.
i set oracle_home and oracle_sid in thereWhere? Is it set in your user variable part of system variable. It is good to set it in the system variable, so that it will be common for all the users who use the system.
To check whether the variable is set or not go to the command prompt and type
setIf you see your ORACLE_HOME variable then it is set or else not.

Can I Set Pres10 Video Express Project Location?

Howdy,
Win7... Pres10 Video Express
In Pres9 Video Creator you could set the path to where you wanted the video project files to live.
There does not appear to be this option with Pres10 Video Express, correct?
Thanks,
A

Hi There,
In Presenter 10 Video Express, when you close the project then it will prompt to save it and it will get saved to by default location C:\Users\ User account\Documents\My Adobe Presenter Video Projects and you cannot change that location.
You can also publish your project to your Computer by clicking on Publish and it will get published to the C:\Users\ User account\ Documents\ My Adobe Presenter Video Projects Published and you cannot change that location as well while publishing to your computer but after publishing your output then you can move the published output folder to the location where you want to place the output.
Regards,
Ajit

HELP !!! How can I set the size of each component separately

Please tell me, when adding components (a mix of
labels , buttons etc.) on a container (swing), how can I set the size
of each component separately.
for example:
the code here has a mix of button and a grid that is actually another JPanel. Its a part of a bigger
program. When running the grid is cut (not seen in its full size).
So, please try to anser also about the specific acse of frame contining another frame in it , and the interior should be right sized.
The relevant part of the code:
=========================================
public class Reversi extends JFrame {
public static void main(String[] args) {
Reversi ourGame = new Reversi();
public Reversi() {
super("Grid Reversi");
setSize(new Dimension(300, 300));
setDefaultCloseOperation(EXIT_ON_CLOSE);
Grid g = new Grid(); // the grid was built at another part..
ReversiGame ourGame = new ReversiGame();
JButton b;
JFrame f = new JFrame("Hello Java");
f.setSize(new Dimension(300, 300));
f.setDefaultCloseOperation(EXIT_ON_CLOSE);
Container c = f.getContentPane();
c.add(g,BorderLayout.NORTH );
c.add(b = new JButton("Hola"), BorderLayout.CENTER);
//f.pack();
f.show();

BorderLayout chooses the sizes of each of the components added to it. Choose a different layout manager (or set the placement/size manually with a 'null' layout)
http://java.sun.com/developer/onlineTraining/GUI/AWTLayoutMgr/shortcourse.html

TestStand Component Locator Database Editor - can't set crosshairs

Similar Messages

Maybe you are looking for