Tether data keeps resetting

I have an iPhone 5 with Sprint. I use the Personal Hotspot feature with a 2GB plan, so I want to monitor it carefully. I use the Cellular Usage feature in Settings>General>Usage>Cellular Usage to monitor the amount of "Tether data" that I'm using. Unfortunately, it keeps resetting itself to 0 rather randomly, without my clicking on "Reset Statistics." None of the other data amounts reset themselves, they seem rather accurate. So I have to go to the Sprint website to check my data usage.
I can't seem to see if there's anything I'm doing, like a hard reset, that would cause this. It just seems crazily random.
Any suggestions?

Well, iOS 5.1.1 does not have any good features so i was avoiding to upgrade my iOS..
Isnt there any solution with iOS 5.0.1.?

Similar Messages

  • IPhone 4S time and date keeps resetting, despite being set to automatically do so.

    After having recently upgraded my iOS to 7.0.4, my Verizon iPhone 4S has started to re-set the time and date every now and then at random. It does this, despite me having my Settings set to automatically set the date and time based on my location. I have called Verizon about this and all they had me do was to reset my network connections and reset my roaming capabilities...and despite me doing that this morning, the time re-set itself again this afternoon. I have found the only solution has been for me to power off my phone completely and then once on again, set the phone either into Airplane mode for a second - or to just wait until the Verizon signal switches the phone back to being the correct time and date on its own. I have also found that these issues have started to affect my ability to send and receive iMessages, as well. For some reason, when the date/time re-sets, the iMessage option becomes un-selected and I have to manually go back and turn that functionality back on. Anyone else having these same issues? It's incredibly frustrating and I'm not sure what else I can do save for constantly hard, re-starting my iPhone everytime I notice the time and date is out of whack. Also it's hard for me to tell if this is an Apple hardware issue/bug that just needs to be fixed - or something to do with Verizon. Any tips/info would be appreciated.

    Try setting your time to manual. This way, the iPhone is the one controlling the time. As you correctly understand, when it is on auto, it is controlled by Verizon and their individual towers. If after setting the time to manual it works, then I would say it isn't a phone issue, but a Verizon one. Do you frequent the same area when this occurs? It could very well be an issue with a particular tower in your area and Verizon would need to check that. If the time goes off again while on manual, then it could be the phone. User troubleshooting is restart, reset, restore from backup and restore as new. Try each in order until the problem is fixed. If it cannot be, then make an appointment at the Genius Bar at Apple to have the phone looked at for hardware issues.

  • EMate 300 Time and Date keeps Resetting

    I got an eMate 300 for Christmas 2013, and a problem I've come to notice is that when I set the time and date, and then tap the mini clock in the corner to re-open the clock, it's either corrupted, or it is reset to default. Is this the memory, or is it a bug? My documents have timestamps on them, and I don't want them to get scrambled up. Thank you in advance.

    Very few people have eMates anymore.   You might find the answer on http://www.lowendmac.com/
    or http://www.pda-soft.de/en/hardware/emate/disassembly/disassembly.html
    You might want to e-mail them to find out if a PRAM battery exists for it.

  • HT203066 Health App keeps resetting data and dashboard view

    Health up on my iPhone 5s (iOS v8.1.2) keeps resetting the data and dashboard views:
    - when I enter data in the 'Me' tab (Birthdate, Sex, Blood type), the data keeps disappearing when opening the application again
    - adding a dashboard (i.e. 'Weight') the dashboard shows (with no values) and disappears again
    - adding a data point in any dashboard manually does not show.
    Also - I am using MyFitness Pal & Withings Health App - no data is showing.
    I recently re-installed the phone as new (couple of weeks ago), I re-installed the third party apps (and deleted all data when asked)
    Any hints, pointers?
    Thanks in advance

    I'm having the exact same problem. I've even tried:
    1. Turn off all syncing by theirs-party sources.
    2. Delete all third-party apps that might sync data so that the Health App "Sources" list is empty
    3. Reset all settings on the phone.
    4. Reload third-party apps one by one
    5. Selectively turn on syncing by third-party apps and only sync categories I really want to see.
    All to no avail. The Health App crashes constantly and when trying to input data into third-party apps, those apps will crash also.
    I'm currently trying to sync data with:
    UP by Jawbone (UP24)
    Withings HealthMate (Withings WiFi scale)
    MyFitnessPal
    Runtastic
    Nike+

  • My Iphone 4 will not send regular SMS messages. I have tried resetting my phone and by restoring and making sure i have SMS turned on. I receive them but can not send them. imessages work also. Plus my cellular data keeps randomly turning off. any ideas?

    My Iphone 4 will not send regular SMS messages. I have tried resetting my phone and by restoring and making sure i have SMS turned on. I receive them but can not send them. imessages work also. Plus my cellular data keeps randomly turning off. any ideas? Thank you

    Yes I have turned imessage off a number of times and that does not seem to he doing the trick, and it is not delivering them then I have to press on the photo and either chose try again or send as text message, I have had the setting on to not allow sending pictures as texts (so they can only send as imessage) since I got my phone in January and it has always worked until now, I have turned that off to allow me to send them as picture messages now but it's still not working over iMessage, I have also tried it using 3G and not wifi

  • MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

    HI NOOB here
    I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
    1st: logo screen came on
    then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
    3rd: screen came up asking either f1 to go into bios f2 to load defualts
    i pressed f2 little dash flashes in the top corner
    rstarted with second {the same procedure as explained }try ubuntu live usb loads......
    after shutdown and installation of OS
    i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
    by going into the bios... which was totally from whats expected i.e. in colomns instead rows
    i was expecting bios style shown below however after thought i got adjusted to the new rows one
    http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
    loaded optimal settings, changed bios clock and date, adjusted boot preority
    saved AND EXITED
    BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
    AND>>>>>>>>>>>>>>>>>>>>>>>>>
    also found that it didn't go directly into the NEwly installed OS.....
    HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
    I'm its quit anoying knowing that this is my first ever computer build

    Quote from: npm1 on 18-November-10, 22:29:03
    it restarts as expected but it doesn't save it........and it continues saying no hard disk detected  low battery even though its connected to psu and say IDE....even though i have sata connectors......
    just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
    Quote
    it restarts as expected but it doesn't save it........and it continues saying no hard disk detected  low battery even though its connected to psu and say IDE....even though i have sata connectors......
    what message exactly you are getting at bios post screen?

  • IPad - after software upgrade the APN settings keep resetting by themselves. There are multilple accounts of this happening. Please help.

    Hello,
    I have a problem with an iPad 2. After the software upgrade to iOS 5 the APN settings keep resetting all by themselves (I set the APN, I get out of the setting by pressing the back arrow on the top left of the screen, I get back in there and the APN setting is gone). Of course, the internet connection si not working. I've seen other people having the same problem on their iPads after the upgrade.
    Does anyone have any idea what the problem could be?

    I too am experiencing this issue - on an iPad 2 using a UK BT DATA plan SIM. This is not an issue with the SIM, as I have tried it in a different iPad and it works without any problems.
    I have also tried all recent iOS updates, hoping it would overcome the issue - but no joy.
    Can we have some assistance from the fine people at Apple please???
    It is getting rather infuriating

  • Mac book pro settings keep resetting

    Hi, I am in need of anyone that can help me with my situation.
    About two days ago, when I booted up my Macbook pro, all the settings would have been resetted (dock is full of apps that I removed, exposes resetted etc).
    Whenever I would set up all the settings to how I had it, it would still keep resetting every single time I turned the computer on and off.
    Just yesterday, my Macbook also started becoming incredibly slow. The first time I boot it up, the screen would always freeze but I could still move my cursor with the spinning wheel. It requires me to manually press the power button to turn it on and off, sometimes twice.
    Please can anyone help me?

    Is your data backed up?  If not, you may need to do a data recovery.
    If your machine is under 4 years old, resetting the PRAM can help.
    If your machine is older than four years, the PRAM battery may need replacing.
    If your data is backed up, and resetting the PRAM hasn't helped, getting Alsoft Disk Warrior may work, if "Repair Disk" won't work by booting either the disc that came with the computer and running Disk Utility from the Utilities menu of the installer, or Disk Utility from the command-R boot sequence available on Macs with 10.7 or later installed.

  • Last_call_et keeps resetting, no other evidence of activity

    I'm trying to debug an issue with a process that pulls a bunch of data into an Access database from a couple of Oracle databases (yes, we're working on killing Access).  Almost everything I can see is telling me that Oracle is doing nothing and it's purely an Access issue but last_call_et in v$session keeps resetting itself which makes me believe that Oracle is doing something.  I'd be really appreciative if anyone can help me figure out what I'm missing.
    What I'm Seeing
    When I query gv$session, I'm seeing the session that Access opened.  Every time I look, the status is INACTIVE, sql_id is NULL, and prev_sql_id is a constant value.  When I look at gv$sql for that prev_sql_id, executions isn't increasing and executions = end_of_fetch_count.  So far, so good, Oracle's off the hook.
    However, when I pull in LAST_CALL_ET from gv$session, that value never gets above 10 seconds.  It's constantly resetting.  That makes me believe that Oracle is doing something every few seconds.  But I can't for the life of me think of anything that it could possibly be doing that wouldn't cause a change in prev_sql_id or a change in the number of executions of the SQL statement.
    Is there something that I'm overlooking here?
    Thanks!
    Justin

    JustinCave wrote:
    gv$session_wait_history is reporting events of
    SQL*Net message to client
    SQL*Net message from client
    It does appear that the Access changes resolved the overall issue.  But while Access was chugging away, I was still seeing LAST_CALL_ET getting reset with no other obvious signs of activity.
    Justin
    If it was changing between FROM and TO there must have been some message coming from Access and bouncing back without an error. Possibly some sort of OCI "ping" type call that didn't involve an SQL statement.
    Update:  something like a "set context" or "set client identifier" perhaps; possibly a (non-SQL) rollback or commit
    Regards
    Jonathan Lewis

  • Smart folders keep resetting

    Hi everybody
    I have made a number of smart folders but they keep resetting the rules that I have made for the folders.
    I have a suspicion that it happens every time I sync. with my .mac account. But I am not sure.
    Doe’s anyone have a good suggestion that can solve my problem.
    Best
    Lars Kudsk

    Hi Kudsk .
    Yes, this looks like a .Mac syncing issue.
    First of all, in Address Book do File > Back up Address Book, just in case something goes wrong while trying to solve the problem. It wouldn’t be the first time someone loses his/her entire Address Book because of syncing issues.
    Now, set up things the way you want, then go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.

  • System Prefs keep resetting

    I have this thing where some System Preferences keep resetting to defaults between restarts: particularly affected are Displays (switching the displays menu item off) and MenuMeters (switching all its menu bar displays off). This would happen on my old G4 Cube and my old PowerBook G4. Over the last month or so I have replaced both with a MacBook Pro and an alu-iMac, hoping the problem would go away, but it hasn't. Both new machines were set up with the migration assistant, so I suppose whatever the bad was on the old ones is still there. Where should I start looking?

    Considering that it reoccured, I would consider doing an archive and install. Since the problem was there and migration assistant was used, it'll probable continue. Delete the same preference file again before the reinstall, then immediately boot from the install disk. To bring yourself up to date quickest, use the 10.4.10 combo update.

  • My iMac sound keeps resetting to come out of left or right speaker only.  Why?

    I have a new iMac 5k Retina.  With this purchase I also started using some speakers through the headphone jack.  I've noticed this annoying pattern that quite often the sound from the iMac keeps resetting to come out of the left speaker only or the right speaker.  I keep having to reset it to balance them.
    Is there a way to stop this?
    Thanks.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Date keeps changing randonly

    Hello I have a 64gb 3rd gen Itouch with os 4, i connect to a pc with win 7 i tunes 10. As of lately as in the last 6 months i will wake up and use my ipod calander for meetings and inportant dates and times. when i turn it on in the morning the date had changed back 3-5 days this happends when it is not pluged in just off or asleep over night. I have tried the hard reset, the restore. Why is this happening it no like its 20 dollar mp3 player come on i would really like to use my **** calender with out the date keep changing backwards.

    Hello I have a 64gb 3rd gen Itouch with os 4, i connect to a pc with win 7 i tunes 10. As of lately as in the last 6 months i will wake up and use my ipod calander for meetings and inportant dates and times. when i turn it on in the morning the date had changed back 3-5 days this happends when it is not pluged in just off or asleep over night. I have tried the hard reset, the restore. Why is this happening it no like its 20 dollar mp3 player come on i would really like to use my **** calender with out the date keep changing backwards.

  • My macbook keeps resetting to 2008 and then won't function. Any suggestions on how to fix this?

    My MacBook keeps resetting itself to 2008.  Also the batter was fully charged when I went to bed last night and then when I picked up the computer this morning it was dead. When powered up it was on 2008 again after I had just reset it last night.  Any ideas? or suggestions?

    The time and date, as well as other settings, are kept by the PRAM battery when your machine is off.
    It sounds like your pram battery is dead and the regular power battery is dying or defective. The Pram battery replacement is difficut and best left to an Apple service provider. The Power battery is user replaceable if it is removable.
    Links to how to replace the pram battery in case you have the skills and tools needed.
    http://www.ifixit.com/Guide/MacBook+Core+Duo+PRAM+Battery+Replacement/297
    http://www.ifixit.com/Guide/MacBook+Core+2+Duo+PRAM+Battery+%28Santa+Rosa-Penryn %29+Replacement/689

  • Date/time resets when battery runs out on E51

    Any ideeas how to solve the problem?

    There is a little auxilliary in the phone. This is the battery that keeps the clock going when the main battery is removed or flat.
    Usually the date/time resets when there is a fault with this auxilliary battery. You can get it replaced at your nearest Nokia Care Point.
    You can find your nearest Nokia Care Point at:
    For UK
    http://www.nokia.co.uk/A4228006
    For Europe:
    http://europe.nokia.com/A4388379
    For Asia-Pacific
    http://www.nokia-asia.com/A4416070
    Elsewhere:
    http://www.nokia.com select your country, go to the support section, then select repair. 

Maybe you are looking for