Tether problems in Aperture 3 with D3x & D3s - No HUD + other issues.

Running Aperture 3 with 10.6.2 on a fast MacPro.
I'm able to tether with both D3x and D3s, but the Tether HUD does not show up.
Tried all the usual, cables, restarts, 64bit vs. 32bit, etc. Nothing. Still useable, but nice to have the HUD.
Also, something I was REALLY hoping for in A3, but very disappointed not to see: I often shoot in RAW+JPEG in the studio. JPEG to give me B&W images that could even be used for finals if they are just right, and the RAW as backup in case I don't like the cameras' B&W conversion, or decide to use color.
The new A3 IMPORT features for RAW+JPEG are great, but when I tether, it usually shows the RAW right away, and then sometime later the JPEG shows up. Usually. Not all the time. If it doesnt show up, and I take another shot, the previous JPEG shows up, followed by the next RAW !
Would be great if there was a way to tell Aperture to ONLY show me the JPEG. Alas...

Using a track to place the pins automatically works fine - within the limitations of Aperture 3 just using minutes and hours and not seconds to place pins.
Moving an automatically placed pin to a different place on the track and letting adjust Aperture the other pins moves them to the next pin location previously used by Aperture and not by the same time offset of the manually moved pin.
Images associated with pin on location 1 get moved to pin of location 2… At least this is what happened the one time I tried that feature.
On top of that Aperture uses some dumb smart filtering and every of the locations require to deselect that filter in the search field of the browser. I guess that's the reason why you get missing images, they just got filtered out from display.

Similar Messages

Problem in BPEL with payload xsd that include other payload xsd.

Hi,
We have a payload xsd that includes other payload xsd. JDev does not complain when we validate or compile the BPEL project but when we try of create a variable of that type in JDev it fails. Any ideas?
<xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.oracle.com/retail/integration/payload/XItemDesc"
xmlns="http://www.oracle.com/retail/integration/payload/XItemDesc"
>
<xs:include schemaLocation="RIBDate.xsd"/>
<xs:element name="XItemSupCtyDesc">
<xs:complexType>
<xs:sequence>
I imported both(XItemDesc.xsd + RIBDate.xsd) the xsd to JDev but it still fails.
Thanks,
Prantor

There are known limitations to XSDs with imports and includes.
Look at metalink and log a SR.
Oracle support ignores this, but with every SR the pressure is increased...
(My SR (XSD importing XSD) was classified not as bug but as enhancement request for the next release)

Having a problem with itunes store and some other issues

ok i'm trying to edit my credit card info in the itunes store right now i put all my info down i get this message
"your credit card information does not match your bank's records. please enter a us credit card and matching billing address."
now i did all that i even went to my bank's website and looked at my statements and even put my info in CAPS like it shows on the bank statement and it says the same now my bank card isn't a credit card is bank check card (or depoit card whatever samething) and still i get the same message. it won't let me get any apps or anything
and i did try the whole
reedit it or put none and do it over and over and still nothing
now as i edit everything millions of times when i try to order something it says theres no secruity code on it so when i edit it again it goes back to credit card info is not the same as the bank's records when it is.
so what am i doing wrong?

Try this: http://www.macworld.com/article/2010185/fix-passbooks-app-store-error-in-ios-6.h tml

Outlook 2011 problem syncing contacts with address book

I am aware that Lion has broken the sync ability of Outlook 2011 with Address Book. Hopefullly this will be fixed at some point.
So my problem is that I have decided to use a workaround to get my Address Book contents into Outlook 2011. I am not concerned with further syncing at this point. I just want to get my addresses into Outlook and hope a better fix is offered at some point.
About the only way I could figure out how to do this was to export my Address Book as vCard. I then imported the vCard file into Gmail and then exported that as a CSV file. It contained 550 addresses. I opened it in Excel and it contained 550 rows. Great so far.
I then Imported into Outlook 2011 and chose import a text file. When the mapping window opened, it showed over 890 files instead of 550 and the fields were not mapped correctly. I could not complete the import because it was so screwed up.
So I'm back to square one and very frustrated. There must be others who have the same issue and maybe have figured out a way to do this. Please help.

Hi Michael Erb1,
As per your issue, i.e Outlook 2011 problem syncing contacts with address book, activation of this issue is usually can solve out through various ways. One of the simplest way, i.e by restarting Outlook 2011 application and need to chase few necessary steps which are clearly mentioned below blog link, from where you can utilize this method and can get a proper solution for Sync Outlook 2011 for Mac with Mac Address Book.
Source link: http://www.blogs.olmtopst.com/how-to-sync-outlook-2011-for-mac-with-mac-address- book.html
Hope this information will assist you and makes you competent to Sync Outlook 2011 for Mac with Mac Address Book easily.

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0

Problem synching aperture photos with iPad/iPhone ios8

Updated to Yosemite. Attempting to sync select photos (Aperture) with iPad Air (ios8) or iPhone 6 (iOS 8.1) with iTunes. When I click Photos in the left-hand column of iTuns I get is an endless loading loop icon in the middle of the screen. No option to select Aperture or the albums, etc. What's going on? Thanks, Bruce

Just two edits
1/ Sync works with the new Photos app.
2/ iTunes does display Apertures folder / project tree in the photos sync section (allowing you to pick what to sync) yet does NOT display the corresponding number of pictures

Problem Using Aperture as an External Editor

I'm having a problem using Aperture as an external editor for iPhoto. I've set preferences to "Edit in Aperture" and selected the Aperture application. When I click edit a photo in iPhoto, Aperture fires up as expected, but it does not load my photo. Nothing seems to be exported from iPhoto into Aperture.
I can export the same photo to my desktop and then load it into Aperture fine.
When I set preferences to edit in CS2, this works fine, only Aperture seems to be the problem.
What am I doing wrong?
I'm using the following versions:
- iPhoto 7.0.2
- Aperture 1.5.4

If you have Photoshop CS2 then you'd have a better editor using it within iPhoto as follows:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Green Box Problem in Aperture

Hey All,
I've been having a problem in Aperture 2.1.4. Every now and again, I get an ugly green box instead of my image. It can happen when I zoom in, when I crop, when I zoom out, or just about any time I am changing the view of the image. I'm on a 20" iMac (2.16 GHz Intel Core 2 Duo) with 3 GB of RAM and am running Snow Leopard 10.6.2.
I took the machine into an Apple store and they ran extensive tests on the video card and other hardware and everything checked out. Any idea on what's going on? It looks like this:
http://idisk.mac.com/fourmoshers//Public/GreenBox.tiff
Message was edited by: Terry Mosher

Do as the above poster said (terence devlin) and submit a bug report to Apple. You can do it from within the program via the Aperture or File menu (forgot which at the moment).
The short answer to your assumption is that yes SL does break the use of Aperture for some. (I am one of them). It is not necessarily the Aperture program update (2.1.4) itself as I have reinstalled Aperture on Leopard with all updates (10.5.8 and 2.1.4) and have had no issues.
As far as I can tell, the problem lies in the card drivers, Snow Leopard Code and Aperture programming code regarding OpenGL and/or CoreGraphics.
To answer your anticipated question about my trouble shooting:
I have done (in no particular order) the font, plist, permissions, new user account, new library, rebuild library, vacuum library, visual inspection of the motherboard (internal) capacitors, voltage/current checks on power supply, new ram, new HD...it became a quest as you can see.... I changed system settings, tried hidden parameter settings, ran developer toolkit utilities to search for error messages and odd behavior. I ran console and watched each line by line message as I performed each Aperture adjustment/task (or at least tried to...)
Finally I reinstalled both Operating Systems (Leopard and Snow Leopard) separately on new drives AND installed Aperture 2.1.4 with a 150GB 30,000 image library on each drive separately. No peripherals, clean systems. No haxies (I do not use them) Nothing but the OS and Aperture and the same library. Aperture performed flawlessly on an external bootable drive in Leopard but not in Snow Leopard..in fact it performed worse and I had the corruption duly noted above and elsewhere.
In my opinion, Apple should be shamed for being so tight lipped about this. It is a serious flaw that should be acknowledged to users. But to admit this without a patch or software solution in the works is an unspoken implication to have customers purchase new computers for a fix.
Anyone notice the released updates for Logic Pro (2 since the release of SL) and Mainstage (also 2 since the release of SL) and Remote Desktop (also 2 since release of SL).....you get the idea? Aperture? Zilch.

Problem syncing Aperture to iPad

Has anyone else had a problem syncing Aperture to the iPad after upgrading to Mountain Lion? I have attempted to sync selected albums from Aperture, but no new images were transferred.
Thanks -
Dudley

I agree, it appears to be screwed up. I've only been able to do limited tests, but it appears you CANNOT choose "Selected Albums, ...." WITHOUT specifying something other than 'no Events'. In other words, you can't simply select an album or smart collection, you MUST choose an event. And I've found even if I choose 'all events', I only get a small subset of the photos in the library included as part of the sync. What's an event, anyway? It's not part of Aperture's nomenclature.
This whole process looks pretty stupid to me, and I don't have time to spend with it right now. In the limited syncing I've done, I've always used the other way, i.e., NOT Aperture. Unless I'm totally missing the boat here, looks like I will have to continue doing that.

Using Aperture with a Network Attached Storage (NAS)

Hi,
I would like to make my Aperture library accessible from severals Macs and for different users on these Macs --- not at the same time. The idea is that only one user from one Mac can use Aperture at a given time.
The basic idea is to install the Aperture library on a Network Attached Storage (NAS) --- either will all photos included or with all photos stored in a separated folder structure --- next to the library ("externally referenced masters").
The NAS I am planning to use is a QNAP TS 239 Pro II+, which will be attached to a Gigabit Ethernet network (to which all Macs are connected too). Following the reviews, the QNAP should be capable to deliver a read/write performance in the order of 70 Mb/s ... hence performance-wise there should be no problem.
I've read through various forums and found many messages telling that using Aperture with a NAS is not possible or at least not a good idea. The posts in the forum were partially a bit confusing; people were telling contradictory things. I also had the impression that the answers depend on the actual version of Aperture. Apple itself put in the release notes of Aperture 3.1.1 about Vaults: "Fixes an issue that could sometimes cause Aperture on a computer with Mac OS X v10.5.8 Leopard to stop responding while updating a vault stored on a network volume." Hence, it seems that Aperture 3.1.1 can work with a NAS ... at least it can use vaults that are stored on a NAS. On the other hand, it's exactly the topic of vaults where many people say that this does not work with a NAS ...
To clarify things, I try to get some clear and competent answers here. The questions are:
Can one store and use the Aperture library on a NAS (whose disk is formatted using a UNIX file system, e.g. EXT4) ?
If yes, does this work in both configurations: (a) with a library containing the masters, and (b) with a library with externally referenced masters (that are also located on the NAS) ?
If a user on a given Mac on the network has opened Aperture (and thus the library on the NAS), is this library the blocked for other users ? (That should ideally be the case.)
If it is NOT possible to use an Aperture library on the NAS, is it then possible to store it on an external, HFS+ formatted drive connected to the NAS via USB ? (QNAP allows to format its external drives with HFS+).
I know that putting everything on an iSCSI target volume on the NAS is a solution, but is iSCSCI properly working under OS X (10.6). I read that one has to install an iSCSI Initiator software first ... which is not from Apple itself.
What about Vaults: According to the Aperture 3.1.1 release notes, it seems to be possible to use vaults on a NAS ... is this really the case ?
Is usage of Aperture on a NAS depending on the file protocol used to transfer the data ? I read also that if one uses the AFP protocol (supported in a QNAP NAS) then everything's fine ... Is this the case ?
Thanks a lot in advance for any clear and correct answer!
Rainer

Can one store and use the Aperture library on a NAS (whose disk is formatted using a UNIX file system, e.g. EXT4) ?
Not reliably, no. You will encounter issues. You could use Mac OS X disk images on the server, mount them on a client, and work that way. Note only one machine can mount the disk image at a time.
If yes, does this work in both configurations: (a) with a library containing the masters, and (b) with a library with externally referenced masters (that are also located on the NAS) ?
(a) no (b) no.
If a user on a given Mac on the network has opened Aperture (and thus the library on the NAS), is this library the blocked for other users ? (That should ideally be the case.)
Aperture does no locking. There is a very high likelihood you will corrupt the library if you do this.
If it is NOT possible to use an Aperture library on the NAS, is it then possible to store it on an external, HFS+ formatted drive connected to the NAS via USB ? (QNAP allows to format its external drives with HFS+).
How would you be accessing it then? If it's over a file protocol (SMB or NFS or ...) it likely won't work.
I know that putting everything on an iSCSI target volume on the NAS is a solution, but is iSCSCI properly working under OS X (10.6). I read that one has to install an iSCSI Initiator software first ... which is not from Apple itself.
Right. There is no Apple-provided iSCSI initator. I don't know how well 3rd party initators work.
What about Vaults: According to the Aperture 3.1.1 release notes, it seems to be possible to use vaults on a NAS ... is this really the case ?
I've done vaults reliably for years using a Mac OS X disk image stored on the NAS, that I mount before backing up. I wouldn't do it "naked" (i.e. stored directly on the NAS).
Is usage of Aperture on a NAS depending on the file protocol used to transfer the data ? I read also that if one uses the AFP protocol (supported in a QNAP NAS) then everything's fine ... Is this the case ?
AFP might have a better chance than other protocols but... frankly... it's a bad idea. If you MUST share a library across many machines, use something like a Promise DS4600 (direct attached) and plug it into a machine when you're using it.

How can I export photos from Aperture with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.

How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?

Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby.

Can't run this version of Aperture with Snow Leopord?!?!

I decided to do a clean install of Snow Leopard on my MacBook Pro. It went fine and I then tried to re-install Aperture. That went fine. However, when I try and run it, I get a message telling me:
"You can't use this version of the application Aperture with this version of Mac OS X. You have Aperture 2.1"
I tried re-installing Aperture, but no joy. This obviously can't be the case. Any idea what is going ok?
Thanks.

You said you deleted Aperture from the Applications folder. Maybe the Aperture file that's causing the problem didn't get deleted. You could try zapping it with AppZapper.
download a trial here:
http://appzapper.com/
Not sure if there's a SL version.
But before you do that, look at this thread, and make sure you don't have the same problem.
http://discussions.apple.com/thread.jspa?threadID=2179417&tstart=0
Note: that poster was starting from 1.5.6 not 2.1
DLS

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Tether problems in Aperture 3 with D3x & D3s - No HUD + other issues.

Similar Messages

Maybe you are looking for