Tethered 30D will not write to CF card

When tethered to Lightroom 3.3 my Canon 30D will not write to the CF card although the tether functions ok.
I understand I can go through Eos Utility but I would rather not use it due to problems caused by cable unplugs etc.
Anyone solved this problem yet ?

Hi Pete,
Thanks for your quick response. But the 30d has only a setting to shoot with or without card, either setting are with the same result only writing the files to the computer.
B.M.

Similar Messages

I updated my 3gs and it wiped all my apps, now when trying to rebuy the apps it is asking for a postcode(i live in ireland where there are none)and it also will not accept my payment card type.any help greatly appreciated

I updated my 3gs and it wiped all my apps, now when trying to rebuy the apps it is asking for a postcode(i live in ireland where there are none)and it also will not accept my payment card type.any help greatly appreciated

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan

IPhoto 9.2 photo descriptions will not write - after a few letters words self erase!

iPhoto 9.2 photo descriptions will not write - after a few letters words self erase! Program update downloaded earlier today, 24.10.11. Fine on my laptop, but my desktop is having problems.

Rebuild the main library.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

App Store will not accept my credit card

App Store will not accept my credit card info

1. You can use Visa, Master or American Express
2. Make sure credit card and billing address is the same
3. Counter check your credit card number, expiry date and approval code (3 or 4 digit on card)

Code will not write to text

Hello to all:
Can someone give advice to why the code below will not write to the text that I save. In other words, when I write a text file then save it then open the text file again, all of the words that I have written are not seen.
     private File workingFile = null;
private JTextArea jta;
private void saveFile()
               if (workingFile != null)
                    try
         FileOutputStream fos = new FileOutputStream(workingFile);
                         fos.write(jta.getText().getBytes());
                         fos.close();
                                        //write the file out through FileWriter
               PrintWriter outFile = new PrintWriter(new FileWriter(workingFile));
               outFile.print(area.getText());
               outFile.close();//close the text file
                    catch (IOException e) { e.printStackTrace();
               else
       JFileChooser jfc = new JFileChooser();
               jfc.setDialogTitle("Save Document");
               int option = jfc.showSaveDialog(null);
               if (option == JFileChooser.APPROVE_OPTION)
               try
          FileOutputStream fos = new FileOutputStream(jfc.getSelectedFile());
                         workingFile = jfc.getSelectedFile();
                         fos.write(jta.getText().getBytes());
                         fos.close();
                    catch (IOException e) { e.printStackTrace();
          }

ok, I found the line that is causing the exception. Line333 which is in
the second if statement , the following:fos.write(jta.getText().getBytes());
Now how would I fix that besides deleting itCan you post the first few lines of that stacktrace? Either jta or fos
(or both) are null; the stacktrace shows you which one caused the
NullPointerException.
Of course you can add a few debug prints just before that line:System.out.println("jta: "+jta);
System.out.println("fos: "+fos);kind regards,
Jos

My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

My Mac OS X 10.4.11 will not write DVDs and gets error code 0x80020022, what is wrong?

That code is not really useful since it just means it can't write DVD's (or probably CD's). The only thing you can do is first to try a different brand of DVD's, higher quality. You could also try burning at a slower speed.
Based on the fact that you are using an OSX that's no long supported, there's probably not much you can do to correct this issue if it is software related. You may also have a failing Super Drive, another consequence of an older Mac.

OPC will not write to AB L32E - Will Read

OPC will not write to AB L32E - Will Read.
I have been able to set up a OPC Server using the NI OPC Server, using the ControlLogix Ethernet driver for the AB 1769-L32E PLC.
All of the tags can be seen. The Lookout 6.7.1 will see real time data, but anything I write too, never shows up in the PLC.
Using the OPCclient in Lookout. Their is No alarm's, other than a value has been adjusted by direct user input..
Their is no comm errors.
I just purchased this software last month.
The NI OPC Server, Events, no errors.
Thanks.
Dave
Solved!
Go to Solution.

Thanks for your posts because I knew this should be possible. Here is what I found. Check step 4 of your channel in case your value updating is wrong or Step 11 of device is set to do not create on startup.
Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.
Step 1: In NI OPC Server Create a new Channel. Channel Name can be whatever you want.
Step 2: Device driver will be ControlLogix Ethernet. You can also enable diagnostics if you want.
Step 3: Network adapter. I used default setting.
Step 4: Write only latest values. Duty at 10. ( These are default settings and are recommended.)
Step 5: Finish new Channel setup
Step 6: Click on Icon to create new device
Step 7: Device Name can be whatever you chose.
Step 8: Select Device Model in this case CompactLogix 5300
Step 9: Device ID For me was IP Address XXX.XXX.XXX.XXX,1,0 (Note the 1 directs path to backplane. The 0 to the slot where processor is)
Step 9: Device timing. Leave at defaults.
Step 10: Auto demotion leave unchecked.
Step 11: Leave at defaults Do not generate on startup Delete on create and allow subgroups
Step 12: Port and watchdogs at default settings
Step 13: Project options leave at default. (In my case I changed to short as that is what most of my tags were)
Step 14: Create tagname from device.
Step 14: Finish Device setup.
You now have two options.
Option 1: Start creating tags as you need them. (This is what I did)
Option 2: Right Click newly created device and select properities. Then select database creation and click auto create.
Go To Lookout and create new driver.
Select OPC Client
Server name will be from dropdown menu. National Instruments:NIOPCServers
Click okay
You should be done and smiling.

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

Most likely the phone is locked to a carrier that you haven't tried yet.

Maxl Script will not write to error file for data laod.

Sorry Glenn here is the new thread. I re ran without the semi colon after data 3 and the same error came up without anything being written to the error file.
I purposely removed a member from the orginal outline that is included in the data loaded but yet the error file is not written to. I tried doing the load manually but executing it in the background, error file is to be created on my local HD but it does not write it there. Checked the output and it is written to a directory located on the server. Although i think this is normal.
Could it be that it will not write to a local drive? I am going to try specifying a spot on the server to see if it runs there.
thanks
Original post below.
Hello,
I am also having this issue.
I will include my script below but will state some details before
We are on Essbase 11.1.1.3
I am running Admin Console from my client PC that connects to the server in the script and I read that in this set up the error file will not get written to. This documentation was for v 9.1.3
Here is my script (i changed some of the names)
login 'user' 'password' on server';
create application 'Money1' as 'Money2';
spool stderr on to 'errorfile';
import database 'Money1'.'Main' data
from local text data_file 'Money1_Data.txt'
using server rules_file 'Data3'
on error append to 'dataload.err';
execute calculation 'CALC ALL;' on 'Money1'.'Main';
logout;
spool off;
exit;
here is the error output i get:
code line: on error append to 'dataload.err';
Statement executed with warnings.
(3) Syntax error near ['$']
I don't see a dollar sign anywhere in my code and the error file does not get produced.
Also do error files get written too if the actins are executed in the background?
Thanks!
Alex

This works for me in a MaxL script run through essmsh.exe:
import database appname.dbname data from local text data_file "d:\\datafilename.txt" using server rules_file "rulename"
on error write to "d:\\errorfilename.err" ;Sometimes EAS (I think you are running it through that) does weird things to MaxL. I eschew MaxL in EAS as much as possible (like 100% of the time).
NB -- the datafilename and errorfilename and their drive letters are local to wherever you're running this process through the MaxL shell. I don't know how that works when you're running EAS -- are drives local to your session, local to the EAS server? Dunno. Leave EAS behind, buy TextPad (no I am not the author of that fine product) and download the MaxL syntax library, and be happy. :)
Regards,
Cameron Lackpour
Edited by: CL on Oct 7, 2010 7:12 AM
Put the MaxL into a code block to get it to display correctly.

Desktop manager for mac will not read the memory card

I have a Storm and the desktop manager does everything correctly except it will not recognize the media card for music. It says "please insert a media card in your device." Ive got the 8GB microSD card and it shows up in the phone memory but i cant load any music from my computer.

OK, I spent an hour and a half on the phone with RIM support this morning trying to fix this very thing with SUCCESS!!! Here is what you need to do. Keep in mind that this fix can only be done on a PC and NOT a Mac. Sucks, but its reality. Click on the link below and make sure that the PC your doing this on has the BB desktop manager installed on it. I went to my dads house and used his PC. After the tech and I learned that the DM has to be installed before you start the fix we were able to resolve the problem and the DM on the mac recognizes the media card. I'm also able to see the BB1 and BB2 icons on the desktop now so I can drag and drop if I want. I hope this helps you all. If you need additional help with this please ask. I may not be the most tech savy person here but I may be able to help a little. Here you go:
NOTE: MAKE SURE THAT THE DESKTOP MANAGER IS INSTALLED ON THE PC YOUR USING FIRST. I ONLY INSTALLED THE ENGLISH VERSION WITHOUT MEDIA SYNCH (to reduce download size and time) AND IT WORKED GREAT.
http://www.blackberry.com/btsc/documentLink.do?externalID=KB19717
Follow the directions to the tee and it should work fine.
PS: If you have problems with your blackberry and you cant find the fix here or on CB call your carrier tech support. If they cant resolve they are pretty quick at getting RIM on the case and resolving without you getting charged for it. Verizon was helpful at that and when I spoke with BB tech support they were extremely helpful. I was very impressed.
I hope this helps all of you with this problem. Good luck out there!!!!

Help to restore my iphone and it will not write error 1002

help to restore my iphone 3gs and it will not write error 1002

Click 1002 > iOS: Resolving update and restore alert messages

It will not take my debt card how do i fix this?, it will not take my debt card how do i fix this?

It will not take my debt card online so I can buy music, how can I fix this?

You might try contacting Apple custormer support for iTunes on this link:
http://www.apple.com/contact

IPad will not remember my client card number for online banking since ios7 update

iPad will not remember my client card number for online banking since ios7 update

Generally speaking, your bank would use a cookie to store your card number (bad) or to associate your browser with its list of saved card numbers (less bad). If you have cookies cleared after each session, then you may be blocking this feature.
To check your cookie handling for your bank's site, when you are on the site, right-click the page and choose View Page Info, then Permissions. Under "Set Cookies" most likely the "Use Default" checkbox is checked. The actual setting will appear in gray.
If the actual setting is not Allow, then uncheck "Use Default" and check "Allow." This will take effect the next time you start Firefox or if you clear the site's cookies on the Security tab (View Cookies button) and then revisit the site.
If the actual setting already is Allow, then some other feature (e.g., clearing history when you exit) or program (e.g., a security suite) is clearing the cookie.
This article has more tips on troubleshooting problems with cookies that don't save: [http://support.mozilla.com/en-US/kb/Websites%20say%20cookies%20are%20blocked Websites say cookies are blocked | Troubleshooting | Firefox Help].
Any luck?

Could not write on SD card after upgradation

After upgrading my HP slate7 to KitKat version, I could not write on SD card. What is the solution for this????

Perhaps this article can help explain how Google changed Android KitKat 4.4:
KitKat and SD cards — what's fixed, what's broken and what's misunderstood.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Tethered 30D will not write to CF card

Similar Messages

Maybe you are looking for