Tethered Shooting in LR3

Where can I find a listing of the cameras LR3 supports for tethered shooting?  Wondering if my Nikon D700 is supported.

I have a Nikon D80 and I am dying to do tethered shooting with Lightroom 3. Does anyone know when it is likely to become available for my camera and Mac OSX 10.6?
Is it a matter of Adobe making it available or of Nikon writing a driver?
I am aware of Sofortbild, and tried using it, but it interferes with the synchronization with my SB-600 flash.
Thanks
Larold7

Similar Messages

  • Tethered shooting and Canon live view

    When using tethered shooting with LR3, is it possible to see the live view image (Canon 1dsIII)? I looked for a setting, but couldn't find any.
    Jonathan

    Jonathan,
    No, you can't. Tethering isn't as feature-rich as folks would like.
    Hal

  • LR3 Tethered Shooting setting issue (image preview/loading)

    Hello everyone, I've got a LR3 Tether issue I hope can be resolved with your help. I recently completed an on-location event portrait session with great turnout. The only issue was the resulting lines that had formed, at times 10+ clients.
    My setup involved photographing the client, then having them review their photos immediately after to pick their choices. This was great until I had a line. LR3 in my setup automatically loads the most recent picture taken. At one point I tried to shoot a client, and have an assistant review photos with the previous client. This was disastrous in that every time I clicked the shutter, the computer would go from whatever photo was being reviewed and load the most recent shot. After trying this with one client, I went back to shoot, review, shoot next. Everyone was given the experience I wanted to provide, I'd just like to make it a little faster/smoother in the future.
    Question is: Can I change a setting in LR3 to stop the automatic loading/viewing of the most recent picture capture while tethered shooting?

    I am having the exact same issue. I had to revert back to lightroom 2 (which dosnt do this when you place images in a collection) and use DIY photobits for tethered capture as I was getting that f@$king annoyed with this bug. I have looked at every setting and nothing seems obvious. Hopefully its not engrained in the software.
    Im just about to send adobe an email or attempt to to find out if this was done to purposely piss people off.
    And as for people who leave feedback saying "i dont know the answer" dont bother leaving feedback, it is completely pointless.
    FogleBR if you find a solution to this problem then please contact me and likewise if i find a solution.
    wurd.

  • LR3 Tethered Shooting glitch

    I often shoot tethered to LR3 with two different Canon cameras and it works flawlessly. However, when I try to connect with a few Nikon cameras (that are on the LR Release Notes as compatible), the cameras can not be found.  I’ve tried all the usual procedures (turning off and on the cameras, starting and stopping the Tethered Shooting in LR, closing and reopening LR).  All to no avail.  Canon Cameras are OK, Nikon can not be "found".
    Any ideas on how to solve this?
    My OS is Mac v10.6.8 and LR is v3.6.

    I'm shooting with a Nikon D3 and am having the same trouble. Specifically, I'm getting the "No Camera Detected" message in the Lightroom tethered window.
    All of my software is up to date. I'm running:
    OSX 10.6.8
    Lightroom 3.6
    D3 USB set to MTP/PTP
    Firmware version 2.02 (for A & B)
    And no luck. Any suggestions?

  • Tethered shooting with D7000

    Hi All,
    Does anyone know if tethered shooting works with the Nikon D7000 in Lightroom 3.3?
    If not, is it already announced when?
    Thanks

    It looks like it is going to be a while before Adobe addresses tethered shooting on the D7000. I just saw the product details for the Lightroom 3.4 release candidate and tethered shooting is still not going to be an option with this camera. http://labs.adobe.com/technologies/lightroom3-4/?tabID=details#tabTop
    Too bad, I upgraded to LR3 for the tethering but I just happen to have a popular, mainstream dslr that is getting left out. 

  • Lightroom 3 Tethered shooting and printing

    I have a very specific question.  I need to shoot guests at a part in a "photo booth" style.  I want to shoot tethered directly into LR3 and then have my assistant print the images as I continue to shoot the guests.  However, I'm having a problem setting up the workflow.  When we are in the print dialog setting up an image to print if I shoot another picture, LR3 automatically updates the working image to the newest capture.  Basically this means that we can't simultaneously shoot and print at the same time. Does anyone have any suggestions about how to get around this?  Thank you, I really appreciate it.
    Jacob

    I'm at work now, I'll try it when I get home.  I spent I don't know how much time looking through the menus for an option just like this.  It sounds like it will do exactly what I need it to.  Thank you,
    Jacob

  • How to keep a copy of the image file on memory card when using tethered shooting with a Nikon D800?

    I love tethered Shooting but as default (at least for Nikon) Lightroom does only save the file on the computer, not on the memory card.
    Now I want to have a backup of the image file on the memory card additionally to downloading it. The tethering software digiCamControl can do this with my camera, so it is technically possible.
    So how can I achieve this using Lightroom tethering?

    Thanks. FWIW I'm very keen on improving tethering and lobbied Adobe endlessly until they added the overlay for shooting into layouts because it was a major reason why some of my clients were unable to switch to Lightroom from PhaseOne. But we have to be realistic and remember that tethering just isn't a key market for Adobe as it is for PhaseOne, so progress is painfully slow. For example, where is live view or setting exposure which are in PhaseOne? I'd be amazed if we get those features for a few versions, and that's why I point serious tethered shooters to other solutions. And realistically, assuming your understanding of the SDK is correct you shouldn't expect a change until the next full version of Lightroom.  Good if it happens, but I wouldn't bet on it.

  • Canon 7D Mark II fails to connect with LR 5.7 for tethered shoot.

    Canon 7D2 fails to connect with LR 5.7 for tethered shoot.  
    The camera connection does work with Canon EOS Utility.
    LR sees the camera but fails to establish and maintain connection.  See small video clip to view the camera and computer behaviour while attempting to connect.
    https://dl.dropboxusercontent.com/u/28457054/7D2%20tethered%20test.m4v
    I also have the Canon 5D3 and have no issues connecting with various software (EOS Utility, LR, Helicon Remote) on that computer.  I have a MacBookPro mid-2009 running OS X 10.8.5.  Lightroom, Camera Raw and EOS Utility are up to date, same goes for the 7D2 firmware.

    It usually takes many months and perhaps more than one version of LR before tethering is supported after raws are supported.  The first hurdle is for the camera manufacturer to release a new SDK with the camera supported, so Adobe can’t have tethering ready when raw support is because a camera isn’t added until after it is announced.  Canon has added the 7D.2 to their SDK about two weeks after the camera was available, so the ball is in Adobe’s court:
    http://www.usa.canon.com/cusa/consumer/standard_display/sdk_homepage

  • Lightroom 3.2 Tethered shooting with Nikon D7100

    I have a laptop Windows Vista which will not allow me to upgrade Lightroom 3.2 to 5.3. I have bought a Nikon D7100. Is it possible to
    enable the older version of LIghtroom 3.2 to recognise the Nikon D7100 for tethered shooting?
    Cheers.

    No, Lightroom 3.2 does not recognize D7100 RAW files, and cannot tether to it.

  • Setting and holding White balance during tethered shooting

    I came to Apeture from Capture One Pro.  I used Capture when working for a photo studio, when I started shooting for myself I went with the much more affordable Apeture.  I have been very happy with the workflow, but Apeture seems to be missing one of most basic settings for tethered shooting, setting and maintaining custom gray balance. I realize that I can shoot a frame with a gray card and white balance that frame, but the following frames revert to the pre-whitebalanced color settings.  In Capture One, I would balance my first frame to a gray card, even add a manual tweek, and all subsequent frames would follow the new color settings.  Perhaps there is a setting I have missed, some sort of automatic inheriting of the last frames adjustments.  I realize that it is easy enough to adjust my color settings after the fact, but my color is off during shooting, and clients are not always able to envision the finished product.  I really hope I'm missing something, because it's the most important feature to me for shooting tethered, right after the ability to shoot tethered.

    It forces this yucky uber warm white balance. Just to make sure it was not shot that way, I then selected "as shot". It immediatly went to the color of the shoot and looks great.
    When you select 'As Shot' do the Temp and Tint settings change? How about other settings, do any of them change? Just trying to determine what is actually causing the color change.
    Did you try creating a new preset with the same settings, and see how it behaves when you uncheck White Balance? The original preset file may have been corrupted (i.e. damaged) and resaves are not fixing it. If this doesn't resolve the problem then it is likely a bug with tethered mode operation. Please let us know.

  • Tethered Shooting with Nikon does not save on CF/SD Cards

    Has Lightroom 5 now a solution for the tethered shooting with Nikon cameras where no save on the CF/SD cards takes place?
    If not, will this covered in the future?

    An external HDD does not help for the most common image loss during tethered shooting: Transfer problems.
    When any transmission problem occurs while shooting and the images are not stored on the memory card, they will be gone. I can't tell you how many images I lost because I had some cable problem while being tethered.
    Tethering without a copy on memory card is not a good idea, really. So since the feature is available (otherwise it wouldn't work in digiCamControl, they don't install a new firmware or use super secret camera drivers or anything) I can't understand why Adobe does not support it.

  • Tethered shooting with Canon 1Ds MarkII?

    I am curious if Lightroom allows for tethered shooting. The Canon software leaves much to be desired and Capture One Pro is a bit steep at $399. I'd like to trash the Canon software and replace it with something more efficient.

    Lightroom3 has 2 options to tether directly or
    through the EOS Utility software.

  • Tethered Shooting with Nikon D7000 - when?

    I was quite surprised (as, it seems, have others) to discover that tethered shooting is not yet supported with the Nikon D7000 in the latest Lightroom 3.3 release.
    Has Adobe made any statements regarding the availability of this feature?
    Does anyone know of any workarounds for the Mac, other than the ridiculously overpriced Nikon Capture?

    I keep shaking the magic 8-ball, and all that keeps coming up is:
    "Answer uncertain. Ask again later."
    Strangely non-random results, too.
    There is at least one free reverse engineered camera control wedge for Nikon cameras on OS X. It worked well enough to drop photos in a watched folder for me. It may have improved somewhat since. If I can find the link I'll pass it on, but I recall I just found it via a web search.
    [Later]
    A quick search led me to http://www.sofortbildapp.com/ and http://stefan.hafeneger.name/blog/category/sofortbild/
    Works with auto import.

  • Does Lightroom 5.7 support the Canon 7D MkII for tethered shooting?

    I have two computers with LR 5.7. I can not get the Canon 7d II to do tethered capture on either one. The tethering tool bar flashes between " Canon 7D Mk II" and "No Camera Detected". The 7D MkII is not one of the cameras listed on the Adobe web site that will do tethered shooting. Given that LR5.7 supports that camera for Camera RAW, why wouldn't it also be able to do tethered capture? Or is there something else I'm missing?

    According to the document Tethered camera support in Lightroom the new 7d II is not currently supported in Lr 5.7.

  • Tethered Shooting with 5d Mark II and Aperture 2.1.4 not working

    Is the 5d mark II not supported by aperture 2? I've been successful shooting tethered with the EOS utility (version 1.6), but whenever I use aperture 2, my camera freezes up and the buttons won't work. I have to power down and disconnect the USB. On the tethered HUD, it says that the 5d mark II is connected, but i'm unable to take a picture. Anyone else have this problem, or know how to solve it?
    Thanks for your help!

    Unfortunately, the 5D Mark II isn't yet have support for tethered shooting as does the 5D Mark I. There is an Automator action you can set up with a "Hot Folder" using the EOS capture utility that is a decent work around. Been using this technique for several months now. I'm sure an update or next version will include tethered support.

Maybe you are looking for

  • Runtime error in Dreamweaver CS4

    When trying to start to work with Dreamweaver CS4 I get a runtime error Afther building a website in in div's and css and saving it I had no problems. Afther closing the computer and starting to work the next morning I got the error. I've restarted m

  • How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

    How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo: I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb I try many time, but after restart bootcamp partition, apple show blinking folder error I

  • How to share 3G with other Apple devices

    Hi, I just updated my iPad to iOS 4.3 and I can't find how to share my Internet connection with other devices. Could you help me? Thanks,

  • Trying to hook speakers up to MacBook PHOTO

    [IMG]http://i61.tinypic.com/2ni4cna.jpg[/IMG] http://tinypic.com/r/2ni4cna/8 Trying to hookup speakers via speaker wire to my MacBook Pro. This is the other end of an adapter I have that the speaker wire goes into, however, there's no longer an input

  • Lists won't refresh in Contacts and Calendar

    I've been syncing successfully with a Motorola V551. I had created a custom contacts list (a subset of my Address Book) which synced OK (not a smart list, since those didn't show up or sync). Then I added/deleted some iCal Calendars. Now only two of