Tethering and the Canon EOS Digital Rebel

Aperture site says its supported but all I get when connected is the HUD will the button in ready mode but when you click capture or take a picture with the camera, nothing. I have connected by PTP and it will not see the camera. I have removed the card and taken pictures with the camera and still nothing.
Is there something I have missed?

canon changed the tether protocols...over a year ago....all canons from the last year cannot be used tethered in aperture....please do us all a favor and contact apple support and put in a request to finally have this fixed...the more write in, the better our chances are....
this is the 3rd thread on the first page of the forum on the same subject....apple please listen...

Similar Messages

Support for tethered shooting for Canon EOS Digital Rebel T1i

I just read online that Apple Aperture 3.1.2 won't tether to my Canon EOS Digital Rebel T1i under OS X 10.6.7. Is this true? If so, is there a workaround or some software I can install?
Thanks,
Joe

BTW - in case anyone is wondering, I've tested this... Canon T1i does work with tethering. (this camera is natively supported by Aperture for purposes of tethering)
For any cases where there is a camera which is not supported directly, there is also a work-around which should work for almost any camera.
Go to the Aperture plug-ins page: http://www.apple.com/aperture/resources/plugins.html
Look for a plug-in called "Aperture Hot Folders" (direct link is here: http://www.apple.com/downloads/macosx/automator/aperturehotfolder.html?cmp )
The plug-in monitors a folder (of your choosing). Any image which shows up in that folder will automatically be imported into an Aperture project (it's on-the-fly). Essentially you'd use the Canon EOS Utility to do the tethering, which requires that you pick a target folder where it'll save all pictures you shoot during the tethered session. You then tell Aperture Hot Folders to monitor that same folder and import any images found into an Aperture project. It gives you the ability to create tethering support for any camera that can do "tethering" even if Aperture doesn't directly support the specific camera (by using the manufacturer's own tethering utility.)

How can I get my computer to recognize the canon eos digital rebel

I have not used this camera for more than 2 years. I now have a laptop with windows 7. This computer will not recognize this camera when I plug it in to usb to download pictures. I have tried everything except what is going to work.

Do you happen to have the original discs? Or, was EOS utility previously installed on that computer? If not, you need to do a bit of shinanigans to get around Canon's protection (which I still don't understand, either you own a Canon, or the software is no use to you). It's not hard, but you have to rewrite a registry file to make the software think it was previously loaded on your computer.
Go here (providing you're in the US) to download EOS utility:
http://www.usa.canon.com/cusa/support/consumer
It's an "updater". So again, you need to have had a previous version on your computer or it won't install. Once it installs all you do is plug in your camera and turn it on and a window pops up offering a couple different options like File Transfer or Tethered Shooting.

Missing photos after import - Canon EOS Digital Rebel

Hi,
After two calls to Apple Support I have solved this issue for this digital roll of 12 raw format images. Here are details for whoever might be interested.
For some reason, iPhoto 6.0.6 was unable to import all of the images from a Canon EOS Digital Rebel camera. 7 out of 12 downloaded fine, however iPhoto seemed to stall at 5 remaining.
Further efforts to rebuild photo library did not help, and the images were never transferred from the camera to the iPhoto 6.0.6 on MacBook Pro Intel (not in original folder).
Then I tried to import the images to the iPhoto 6.0.6 on MacBook Pro Intel via a different user. Then I deleted the first 7 images from the memory card, and tried to import with iPhoto and with ImageCapture. None of these worked.
Then a new memory card with 4 test images (2 large, 2 raw) did import to iPhoto ok.
Then I used Canon File Viewer Utility to drag the 5 images from the first memory card to the desktop. And then I reformatted that memory card.
Before deleting or reformatting the memory card I was also able to import the 12 images to a 12in PowerBookG4 with iPhoto5 version 5.0.4 ok.
From now on however I will be counting the images from card to iPhoto.
MacBook Pro Mac OS X (10.4.9)

this is answered per calls to Apple Support

Canon - EOS Digital Rebel T1i

Hi! I want to buy Canon - EOS Digital Rebel T1i 15.1-Megapixel Digital SLR Camera - Black, and on bestbuy website says: "digital camera that features an 18-55mm image stabilized zoom lens" But when I come to store, I saw this camera and this kit lens without IS. How it can be?? is it different products, in local store and in online store?? Thank You.

_Hungry wrote:
I don't know what the lens was there, but "Stabilizer" or something like this isn't on it , and the bestbuy worker said that this kit camera doesn't have IS.
Ask to see an unopened box that includes the kit. If it claims that the lens has IS, purchase the unit and open the box in the parking lot to verify that it is an IS lens. Hard for them to argue that you pulled a swap if you come immediately back from the parking lot. (The longer you wait to open, verify, and return, the harder it is to return an "inconsistent" unit.)
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Does LR6 support tethering for the Canon EOS 70D

Hi
does LR finally support tethering for the Canon EOS 70D ?
Uli

Hi Ulrich,
It seems Canon EOS 70D is still not support in Lightroom6.
Please refer the following the list of supported cameras.
Tethered camera support in Lightroom
Hope this helps.
Regards,
Sumit Singh

HT4757 installer for canon eos digital rebel xt for mac 7.10.5

I need to know why my camera isnt downloading my photos anymore. I couldn's find my installer, and it should be on my compter. Is there an online download for this camera with this latest system?

BTW - in case anyone is wondering, I've tested this... Canon T1i does work with tethering. (this camera is natively supported by Aperture for purposes of tethering)
For any cases where there is a camera which is not supported directly, there is also a work-around which should work for almost any camera.
Go to the Aperture plug-ins page: http://www.apple.com/aperture/resources/plugins.html
Look for a plug-in called "Aperture Hot Folders" (direct link is here: http://www.apple.com/downloads/macosx/automator/aperturehotfolder.html?cmp )
The plug-in monitors a folder (of your choosing). Any image which shows up in that folder will automatically be imported into an Aperture project (it's on-the-fly). Essentially you'd use the Canon EOS Utility to do the tethering, which requires that you pick a target folder where it'll save all pictures you shoot during the tethered session. You then tell Aperture Hot Folders to monitor that same folder and import any images found into an Aperture project. It gives you the ability to create tethering support for any camera that can do "tethering" even if Aperture doesn't directly support the specific camera (by using the manufacturer's own tethering utility.)

Nikon D40 or canon eos digital rebel xt

I'm looking to make the transition from p and s cameras to an SLR. I have my eye on these two cameras. I'd be using them mostly for scenic shots and sports photography. I don't really have a budget (I don't mind spending more for the canon), my concern lies with the practicality of using each at my level. If I get the canon will there be too many options for me to grasp? Alternately, if I get the D40 will I quickly outgrow it and have to spend more for a new camera anyways?
I also had a question about shooting raw jpegs. I'm fairly fluent in Photoshop cs3 in terms of design and compositing elements. Can CS3 edit raw jpegs or will I have to purchase a program like Aperture? Thanks.
Message was edited by: Paperwayte

Are you buying these "used" and at a substantial discount from suggested retail? Both are old and have been replaced by cameras in the same price range with substantially better specs.
The Canon EOS Rebel XS and the Nikon D3000 compare with nearly identical specs. Both have 10 Megapixel sensors. Sensors are nearly the same size. Both come as a 'kit' with an 18-55mm image-stabilized lens, and both have similar street prices (you should have no trouble finding them for about $470 -- both Amazon and BH Photo sell them at that price.)
When I look for the Rebel XT or D40 they're hard to find and the places that claim to have them want more money for them than the substantially improved cameras that took their places in the respective model lines.
10 megapixel crop frame sensors do a very respectable job. Unfortunately those start 18-55mm zoom lenses are "good" but not "great". With higher quality lenses these cameras will take much better pictures. Unfortunately high quality lenses cost as much or more than the whole starter camera outfit -- so that's probably something to grow into.
I don't know the Nikon lens line-up as well as I know the Canon (I'm a Canon guy but I'm not particularly biased.... basically in the competitive landscape of DSLRs it seems to be a slug out between only Canon and Nikon. There are lots of others but I think they trail behind.
Though you can get models with 12, 15, 20, megapixel I think 10 is really very substantial. At this point the lens quality becomes a major factor in how good the photos will look as many lenses don't deliver enough definition for higher resolution sensors to show off their best work. This is the case with the 'starter' lenses that come with these cameras. They are "o.k." and will take decent pictures (far better than you'd ever get with a compact camera), but when you take a tool like Aperture and put the image in full-size mode (so every pixel on the screen represents a pixel from the camera) you'll see that the images aren't so crisp. At that point it's more about acquiring better lenses than it is about acquiring a better camera.
On the Canon side, the EF-S lens series are designed specifically to work with the crop-frame sensor cameras. The EF (without the "-S") are designed to work with the full-frame sensor cameras but will also work perfectly with the crop-frame (EF works with any Canon EOS -- Rebel or not). The reverse is not true (EF-S lenses will NOT work with Canon's full-frame sensor models). If you plan to upgrade but keep your lens inventory then keep that in mind when making purchase decisions. On the other hand, EF-S lenses are usually more affordable -- so if the price of EF lenses isn't practical for your budget (especially the EF lenses that come with "L" series optics -- astonishingly gorgeous optical quality but VERY spendy price tags.) you might just stick with the EF-S lenses anyway.
Similarly, the Nikon's come in crop-frame sensor versions (e.g. the D3000) or full-frame sensor versions (e.g. the D3). Full-frame is MUCH better, but also much more expensive. You'd have to ask a Nikon guy how their lens line-up works. I'm assuming they have similar nuances, but I'm afraid I can't be much help there since I have no experience with them.
As for Aperture vs. Photoshop... they're very different beasts. Photoshop does wholesale image manipulation. Aperture does better photographic quality adjustment and also manages all your photos but doesn't do wholesale image manipulation (e.g. you couldn't cut a person out of one photo and stick them in another using Aperture. But you can touch-up images in Aperture... e.g. remove a minor object using the clone tool, touch up blemishes, etc.). I have both Aperture and Photoshop CS4 -- not sure how Adobe is for providing RAW updates for CS3 since it's no longer the 'current' version.

I am having trouble importing jpegs shot on my Canon EOS Digital Rebel XTi

I have about 1000 jpegs that i need to import into FCP. A few specs to start off with. I am working on FCP 7.0 and a brand new MacBook Pro. I have had this camera for about 4 years and have not had a problem importing the jpegs into my old laptop and old FCP program.
When i try to import the jpegs, the 2 portrait jpegs will import fine, but the 350 landscape jpegs will not. I keep getting the "file unknown" error. The dimensions are exactly the same, just reversed. it is RGB. i am able to open the file in preview and resave and then it will import fine. But, i have 1000 photos and don't want to have to do that for all of them. Plus, i will be taking several thousands more and won't have time to do that to each and every photo.
How to i solve this problem so I can simply import the landscape jpegs as i have always done?
Thanks in advance for all of the help.

Will I have to do that for every picture? I am able to open them in Preview and resave them and they work fine. Is there a camera setting that I need to use to dictate how the pix are imported?
Thanks for your help!

Is the canon eos rebel t3i compatible with Mac osx 10.9.1?

Is the canon eos rebel t3i compatible with Mac osx 10.9.1?
I am trying to transfer my photos from my camera to my Mac.
I have downloaded the software for the camera to my Mac BUT it cannot transfer the photos.
EOS Utility states that it cannot be used with this version of the operating system.
I am running on OSX 10.9.1
Any suggestions?
Thanks in advance.

I would try uninstalling the canon software and then just plug your camera into your Mac. iPhoto should be all the software you should need.
Message was edited by: arthur

HT4106 Is the IPad connector kit compatible with the Canon Eos 350D digital camera, I can't get it to work. Comes up as device not supported

is the camera connector kit compatible with the Canon EOS 350D digital camera, as I can get it to work

Check what you've got 'Communications' set to on the camera's settings - it needs to be 'Print/PTP', not 'Normal' 'Normal' to 'PTP' :

Remote capture with eos digital rebel xt

Is remote capture possible with windows 8 and the EOS Digital Rebel XT?

There is no Windows 8 driver available for Canon EOS Rebel XT, as far as I am aware of. However, there is a Windows Vista driver available on the Cannon Support websites. Try downloading it and installing it in Windows Vista compatibility mode and and see if it makes the EOS Utility work. If it does you should be able to remote shoot with a USB cable.
I have not tried my old XT with Win 7 or 8 but this may do the trick.
Good luck
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Can't install Canon EOS Digital Solution disk

Hi,
Have got a problem installing 'EOS digital solution disk' which came with my Canon EOS 400D digital SLR camera. Here is a description of what happens:
I click on 'CANON EOS Digital Installer' icon as instructed. First something called 'MasterInstaller' launches, and I select 'Europe' then 'UK' when prompted. The main menu appears again and I select 'Install', then 'Next' then 'Easy Install'.
I 'Agree' the terms, then hit 'Next' in Starting Installation window.
At this point, 'Installer' launches and a window appears with the text "Preparing to install ImageBrowser" (with a blue striped barber pole type line beneath) but nothing happens. The blue stripes do not 'move' as is normally the case when something is working. It just locks up, and usually the Mac beachball of death will spin. I've tried leaving it ages to sort itself out, but nothing changes.
When I go into the 'Force Quit' option from the pull down menu in Finder, (as everything is stuck) the 'Installer' and 'MasterInstaller' are usually highlighted in red, I guess meaning they've either crashed or got lost. Sometimes the Finder joins in too (being highlighted in red).
I'm not running any other applications, and I've tried doing a Custom Install, (instead of 'Easy') and choosing only 1 application at a time, and disconnected my external drive but to no avail.
I tried emailing Canon, but they have just suggested I try loading it onto another Mac but I don't have one or access to one either.
Some help would be appreciated.
P.S. Gave disk to my partner to try on his PC and he said it loaded ok, so I assume it's not a faulty disk.

So it still said Keys out of order ? That is a pretty serious error that Disk Utility rarely is able to repair. I would run it again and report to us exactly what is reported when you attempt a repair (not verify) please.
Hi Dale,
Well, the plot thickens....
I kept running the DU repair (about 5 or 6 times), and interestingly enough kept getting EXACTLY the same message:
Checking HFS Plus volume
Checking Extents Overflow file
Checking Catalog file
Keys out of order
Rebuilding Catalog B-tree
Repair completed
No details or other messages about what the specific problem was. (Is there a way to find out?)
Well, I took another look on the link you posted and ran an 'fsck'. (I still have no idea what that means but it sounded as if it may throw up some info.) Indeed it did and here's what appeared after I typed '/sbin/fsck -fy':
** /dev/rdiskOs9
** Root file system
** Checking HFS Plus volume
** Checking Extents Overflow file
** Checking Catalog file
diskOs9: 0x8 (UNDEFINED)
Keys out of order
(4, 1886)
** Rebuilding Catalog B-tree
diskOs9: 0x8 (UNDEFINED)
** The volume Mac Hard Disk could not be repaired.
sh-2.05a#
(Hopefully there aren't any typos, I just typed this in myself, having written down the info on paper.)
Obviously the DU knows there's a problem, but simply thinks it's fixing it every time I run a repair. A bit like Groundhog Day I guess....
Now what??
Cath

My canon EOS DIGITAL ver 24.0 in not working with mac pro os x

MY CANON EOS DIGITAL SOFTWARE VER 24.0 IS NOT WORKING WITH THIS VERSION OF MAC OS X

Atiya wrote:
I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?
I use a 24" LED with my Mac Pro. Works a treat!
Does this help you? http://support.apple.com/kb/TS2400
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Does anyone know when Aperture will support RAW files from the Canon Eos 7D mkii?

Does anyone know when Aperture will support RAW files from the Canon Eos 7D mkii?

Only Apple knows. The never announce upcoming RAW support in advance, sorry. And if anybody knew, it would not be allowed to post this information here.

Tethering and the Canon EOS Digital Rebel

Similar Messages

Maybe you are looking for