Tethering with O2 Germany impossible due to apples ipcc files

Luckily i Germany T-Mobile lost their exclusivity to sell the iPhone. Since this time apple provides new ipcc files over air which I accepted unfortunately. Since this time I lost my tethering functionality again even if my provider O2 allows it. The only way to fix it is to download old ipcc files and to install them via itunes (to do so you need to type the command "defaults write com.apple.iTunes carrier-testing -bool TRUE" in the terminal (MAC), than resart itunes, press alt+searching for updates, select the downloaded ipcc file and thats it. After that the iPhone is using the "unknown-profile". So you have to re-enter the apn and so on, but tethering will work. But again you will see the message "Rufumleitung aktiv" if receiving or doing a call... So you never can have full functionality it seems.
But why Apple provides wrong ipcc files? And why does Apple not fix own mistakes immediately?
Message was edited by: HumanBerlin

I use O2 Business Upgrade (2 Sim cards with 5 GB Traffic per month) and O2 allows explicitely - ask the hotline. They expect, that apple will fix the problem soon and apologize for the wrong ipcc files distributed by Apple.

Similar Messages

  • All of a sudden my computer states that it cannot sync with my i phone due to a missing file.  How to I fix this?

    I cannot sync my Iphone 3GS with my IMAC because it says
    the required file is missing.  How do I fix this?

    Are you syncing photos to the phone?
    If so, try deleting your existing iPod photo cache. To locate that, see the following document:
    iTunes: Understanding the iPod Photo Cache folder

  • Bluetooth tethering with Sprint is slowwwwww

    Is this normal? I get fast speed on the mobile handset, but when bluetooth tethered with
    the Mac...its super slow. I usually get like 700kbs on the handset, now im getting 100kbs the most.

    I might have a solution for you, but its a crappy one.
    I have the exact same problem with this phone and my new 17 Inch Macbook Pro.
    What fixed it for me was using a Bluetooth Dongle instead of the built in Bluetooth. You need to add a second PAN connection in the Network Prefs and repair everything, but when you get it all configured correctly and use the Dongle instead of the built in Bluetooth, I bet it works flawlessly.
    There is something wrong with how Apples newer Bluetooth hardware is interacting with this phone. I even went to an Apple Store and tested on another 17 inch Macbook to make sure it wasent just my computer. The older Macbooks worked fine, so its something in the newer hardware.
    Call Apple, make them aware that this is an issue with all their newer stuff. Let them (and me) know if using an external bluetooth adapter fixed the issue for you.

  • Why tethering with USB cable doesn't work after IOS6.0 update?

    why tethering with USB cable doesn't work after IOS 6.0 update?

    Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

  • What does this statement mean: "There is a problem with your authentication, possibly due to inactivity. For your safety, you have been logged out and must sign in again to continue?"

    I am able to make it to the site for about 2 seconds and then I am quickly logged off and the statement, "There is a problem with your authentication, possibly due to inactivity. For your safety, you have been logged out and must sign in again to continue."
    I don't have a clue as to the problem but since this is impacting my participation in these classes and ultimately could have a negative impact on my grade, I am more than a little concerned!

    Have you allowed this site to set cookies?

  • Aperture 3 tethered with Nikon D300 trouble

    I've been having trouble shooting tethered with Aperture 3 and the Nikon D300. It works for a few shots then it jams with the spinning wheel until i have to force quit. Also the inspector column gets messed up with type over type. I'm assuming apple will issue an update for this but i'm not very impressed. I have been using Capture one, trial version in the meantime to get by until a fix arrives and it has been working fine. Nice fast captures and no BS. <Edited By Host>

    I gave up with shooting tethered in Aperture 3. I now use Capture one 5 Pro from phase one. I use Aperture for the image adjustment because i like the built in retouch tools and the image management (although my search does not work in Aperture 3, waiting for an update). I'm not impressed with Apple software right now.
    Capture one works flawless tethered, the fastest importing i've ever had and didn't take long to get used to the focus tools etc. Try the 30 day free trial and you'll see. When I'm done a shooting session, i just drag the capture folder (with the NEF files) onto a flash drive and import them into Aperture for adjustment.

  • Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file?  Having issues with viewing published projects due to this.

    Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file?  Having issues with viewing published projects due to this.   Would be thankful fo rany/all advice.

    I'm having the same issue. I've been able to work around it by opening the txt file and copying the contents. Then I open a new file in Sublime Text 2, paste the contents and save the new file as "project.json". It seems to work, but it'd been nice if I didn't have to do this everytime I publish a new project.

  • I am unable to download iPhoto version 9.5 and iMovie version10.0, with my apple ID due to remark, this update is for an app downloaded with different Apple ID,Sign in with that Apple ID and try again,but I don't have other ID

    I am unable to download iPhoto version 9.5 and iMovie version10.0, with my apple ID due to remark, this update is for an app downloaded with different Apple ID,Sign in with that Apple ID and try again,but I don't have other ID.
    <Email Edited by Host>

    The Early 2011 MacBook Pro shipped with Snow Leopard, so these are not the Mac App Store versions of iLife, they are the boxed software versions.
    If they are in an iWork '09 folder take them out and let them loose in the Apps folder. Then reindex your HDD.
    Spotlight: How to re-index folders or volumes -
    http://support.apple.com/kb/ht2409

  • Aperture FREEZES WHILE TETHERED with Nikon D90

    I shoot a lot in my studio, so shooting tethered with my Nikon D90 is very useful... UNTIL Aperture freezes every 10-15 captures, so I have to FORCE QUIT it and restart. This, of course, is SUPER ANNOYING, especially when CLIENTS are watching.
    Can anyone please enlighten me what's going on, and how I could alleviate the problem? I'm running the latest version of Aperture on a MacBook Pro 17" with a 2.3GHz processor and 4GB of RAM. And I'm usually not running anything other than iTunes alongside Aperture while shooting. Any ideas?
    Thanks!

    I finally gave up on tethered shooting with my Nikon D3 and Aperture 3. Aperture crashed every fifth shot or so and made me crazy. I tried new libraries, new cables, faster computer, etc. I submitted countless bug reports. I waited patiently for a software fix, because I never had this problem with Aperture 2.
    I gave up and rolled back to Aperture 2 on my laptop (which I use only for tethered shooting). Now tethering works perfectly again; it's a software issue. I've had one crash in maybe 2000 shots with Aperture 2, and I can live with that. It's a crummy solution, but it's either that or I buy Lightroom and scrap Aperture for good.
    FYI: the raw converter is different in Ap2 than Ap3. What looks good in Ap2 looks underexposed in Ap3 (almost by a stop, looking at the histograms), and the color rendering is quite different between the two. If you try this Ap2 solution out, do some testing before you do a live shoot to make sure you're happy with your results.

  • Tethering with Nikon D600 - no camera found!!!!

    This is incredibly frustrating to have a $2,000+ camera that cannot connect to Lightroom.  It really impacts the value of both Lightroom and my camera if they don't talk to each other.  Please advise when you anticipate this being fixed in an update.

    Lee Jay wrote:
    Then why did you buy the camera?
    Well ... considering Aperture and Capture One both support the D600 for tethering, some folks would think the world's leading graphics and imaging software developer would also have supported the D600 by now ... the idea we should be held hostage by a third party developer to base your equipment purchase decisions is just a tad ridiculous ... sometimes we are in need of upgrading equipment for more reasons than what you or Adobe may consider important ... Adobe is NOT the center of the Universe ...
    Adobe should be a bit more responsive to stay current ... if they don't consider it a priority to do so, or feel it is too difficult to offer support for tethered shooting, maybe they should drop tether support all together ... it can't be that difficult to offer the support if others can get the job done ... we are not discussing a topic so complex as manned space flight to Mars ... we simply would like to transfer image data from camera to computer at the point of capture ... a task that is not as complex as some would like us to believe ...
    To the OP - You can shoot tethered with Lr on Mac OS X as long as you have installed the current Digital Camera RAW compatibility updates ... then use the included Image Capture app (found in the Applications folder) and then point Lr to a watched folder for auto import (this would be the folder you select in Image Capture) ... you won't be able to trigger the camera from within Lr or adjust camera settings ... but you can get the job done this way until Adobe decides it's time to catch up.

  • Tethering with Nikon D750

    I know this was asked a few weeks ago, but any news on tethering with the Nikon D750 in Lightroom?

    If there was, the Lightroom Tethering Support page (which we're all free to check) would have been updated.

  • Lightroom 4.2 stopped mid way through tethering with Canon 1DX.  any suggestions?

    Lightroom 4.2 stopped mid way through tethering with Canon 1DX.  Top left corner bar read still transferring, but all images had already been viewed in preview of tether and i had given it an etxra 15 minutes to contine transferring until I rebooted everything.  I restarted several times while client waited, but LR would no longer accept tethered images any longer.  Any suggestions?

    Well, the EOS Utility was incompatable with OSX for quite awhile and once LR appeared to support tethering, I migrated away from it. Until yesterday.
    The workflow is still wonky, if you want to use LR for display/printing (which I do), but it's doable.
    There are tutorials online, I remember finding them (sorry no links) years ago.
    The main bugaboo is creating the appropriate folders in the right order. Both LR and EOS Utility are really picky about those folders (have to be empty, both apps picky about that, so you'll probably have to manually empty after firing off a couple of test images).
    I always forget how I did it, but last night's kind of fresh in my mind — I think the order that worked for me was:
    create a destination folder in EOS Utility
    in LR's auto-import settings, choose the step #1 folder as the watched folder (you've got to do this before putting a single thing in that folder, which will likely mean manually tossing some test images, because if you don't LR will ***** at you that the folder must be empty.)
    below that in the same window, create a Destination folder. (don't know why this is necessary, but it is)
    Finally, I suggest doing all this in one parent folder and creating a shortcut to that folder somewhere very convenient so that you want drive yourself crazy in the inevitable opening, closing and reopening of these folders, trying to troubleshoot. :-)

  • MBP keeps crashing when using Internet Tethering with iPhone4

    I have had 2 crashes today of my new 13" MBP (I7 CPU, 8 Gb RAM, SSD) while using Ethernet Tethering with iPhone4. This is really embarrassing. I have used PC all my life and this is my first Mac. It's been many years since I have seen Blue screen of death on my PC. I have always heard about super reliability of Mac and could not believed my eyes when I saw the black message. Software industry moved long way improving reliability but looks like Mac team is moving in other direction. Unacceptable!

    Same with my MacBook Pro!
    I was really upset with this issue.
    I got it in early March 2011, just only one month and a few days.
    I always connected via USB tethering, it did work.
    The problem just started yesterday, it almost 10 times after connect internet.
    I called to the technical support and they told me to update to 10.6.7 (Mine was 10.6.6)
    Then I updated and it went well (which I found out later that cuz I use the WiFi to connected) for the rest of the day.
    But after I came back home and connected via USB , it crashed again.
    Then I decided to go to the store at 5th ave. , they checked for a 10 minutes and told me to backup all my data and take it back to them.
    Let see what is going to happen next.

  • I was writing a very important document; I saved it and I closed pages, now when I try to open it, I have a message with "it's impossible to open this document". How can i fix it?

    I was writing a very important document; I saved it and I closed pages, now when I try to open it, I have a message with "it's impossible to open this document". How can i fix it?

    When you have 2 versions of Pages on your Mac:
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed over 95 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • Tethering with LR and 7D

    While tethering with my Canon 7D is there any way to automatically have the pictures that are taken immediately watermarked and stylized?  I went to a photobooth at a nightclub and they took this picture:
    http://generationdomination.com/_media/photos/ba2d2fd456_f.jpg
    And right after the picture was taken he immediately had it put up on 2nd monitor that was off to the side.  His setup was pretty simple, camera, macbook, flash, 2nd monitor and props.  I believe he was running photoshop, bridge, EOS utility. 
    Any help on how he achieved this?? Thanks

    would it immediately be stylized as soon as the photo is taken?  He had the ability to snap the photo... click one time on the computer then it was moved over to the slideshow with the watermark at the bottom right along with the styling

Maybe you are looking for