Tetris source code in Xlet

Hi,
Can anyone please post me the tetris game source code in Xlet?? I have found source code in which points(polygon) are taken to create the shapes. I want the source code in which images are used to create shapes.I have tried by using four small rectangle type colored image and combining them together to make single images that are of L-shape,I-shape,T-shape etc..etc.Also I want the codes of positioning the shapes and the disappearence of the lines when it is completely filled. Kindly help me .I am in urgent need of the source code.
The code should be in Xlet.

Hi,
Hey thanks. I am able to log into the site. I also got the code but again i found that the code is written by taking points and colors to create the shapes. I need some codes in which the shapes are created by taking colored images somewhat in this way,
colorImage[0] = TrackPicture.loadImage("./images/square_red.png", 29, 29);
          colorImage[1] = TrackPicture.loadImage("./images/square_blue.png", 29, 29);
          colorImage[2] = TrackPicture.loadImage("./images/sqaure_yellow.png", 29, 29);
          colorImage[3] = TrackPicture.loadImage("./images/sqaure_green.png", 29, 29);
These are the images and by taking co-ordinates they are joined to create shapes. I have tried combining them through the paint( drawImage )method. Please give me some solutions if you have. Thanks in advance.

Similar Messages

  • Tetris Source code in Xlets...Somebody please help me with this topic.

    Hi,
    Hey thanks. I am able to log into the site. I also got the code but again i found that the code is written by taking points and colors to create the shapes. I need some codes in which the shapes are created by taking colored images somewhat in this way,
    colorImage[0] = TrackPicture.loadImage("./images/square_red.png", 29, 29);
    colorImage[1] = TrackPicture.loadImage("./images/square_blue.png", 29, 29);
    colorImage[2] = TrackPicture.loadImage("./images/sqaure_yellow.png", 29, 29);
    colorImage[3] = TrackPicture.loadImage("./images/sqaure_green.png", 29, 29);
    These are the images and by taking co-ordinates they are joined to create shapes. I have tried combining them through the paint( drawImage )method. Please give me some solutions if you have. Thanks in advance.

    Warning: I'm not a game developer, so maybe what I'm going to say has nosense ;)
    What about creating an object for the falling piece? The object control de position of its own squares and check for collisions at the bottom of the screen. Then you should work in the screen as it is a grid where pieces are stored, and everytime the falling object touchs some other piece, check what rows are fully filled and move those which are over it.
    Don't know if it will help you :)
    Cheers

  • Xletview: why not use sun's javaTV source code directly ?

    xletview : one emulator for viewing MHP Xlets on a PC;
    I see many difference from sun's code about the part of javaTV.
    Why the author Martin Sveden need to rewrite them and not use sun's javaTV source code directly ?
    Thank you for your any answer.
    Sorry for my horrible english.

    XleView is a fine effort, but it has its limitations. I tried using it for the GunBunny demo available in the JavaME SDK 3.0 Eary Access available in
    http://java.sun.com/javame/downloads/sdk30ea.jsp
    and I encountered some of thost limitations. What Sveden does it several tricky manipulations in a classloader for the Xlet. In particular, he translates bytecode as he loads the Xlet's classes, changing some class names, such as changing
    java.awt.Toolkit
    tto
    xjava.awt.Toolkit
    This works up to a point. This version of Toolkit usually just turns around calls java.awt.Toolkit's corresponding routine, but he deliberately he does not implement the ubiquitous
    public Image createImage(URL url)
    When I downloaded his source and tried adding ths into his code, I then encountered at runtime
    Uncaught error fetching image:
    java.lang.NullPointerException
    at sun.awt.image.URLImageSource.getConnection(URLImageSource.java:97)
    at sun.awt.image.URLImageSource.getDecoder(URLImageSource.java:107)
    at sun.awt.image.InputStreamImageSource.doFetch(InputStreamImageSource.java:240)
    at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:172)
    at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)
    I think that this is some optimization within J2SE where they do not wait for the image to load and do the fetching in a separate thread. I do not know if there is some way to force the Sun's JVM to disable this optimization and I have not investigated furher, but I did email Svenden. I noticed that the current version of XleTView is 0.3.6 which is dated June 2004 and the web site http://www.xletview.org/ has had not news since 2005 .
    I note that Svenden provides an elegant user interface but I advise you not try to learn the API's from his classes: he makes no effort to keep his implementation separate from the API standards so, for instance, his version of HScene is
    package org.havi.ui;
    public class HScene extends Container
    implements HComponentOrdering, ImageObserver, MenuContainer, Serializable {
    whereas the real standard is
    public class HScene extends Container
    implements HComponentOrdering {
    I hate to critize such a fine effort, but it is best to keep an imlementation separate from the public API.
    I agree that having a lightweight, simple and Java feature-complete Xlet viewer running would be very helpful, especially if BD-J gains much popularity. I have found trying to work with the vendor players described at
    http://wiki.java.net/bin/view/Mobileandembedded/Blu-RayDiscHelloWorld
    to be frustrating. I tried all four mentioned and I have gotten none of them to work for me yet. These are huge downloads and the "Intro Version" of Arcsoft pointed to at the SDK 3.0 Early Access page
    http://www.arcsoft.com/products/totalmediatheatre/
    just gives a "File not found" HTML page. This forum post mentions that perhaps it was recently taken down?
    http://www.arcsoft.com/forum/forum_posts.asp?TID=1084
    I have already emailed Michael Downs of Arcsoft since he is mentioned here:
    http://wiki.java.net/bin/view/Mobileandembedded/BDJPCPlayers
    What did work for me was to take Sun's JavaTV 1.1 Reference Implementation and PowerDVD's BDJ.jar and hack/fix a few classes to get GunBunny to work within the RI's RunXlet program. This is not trivial but I will will describe:
    Download the JavaME 3.0 SDK EA and then download the correct version of PowerDVD that the SDK page points to:
    http://www.brothersoft.com/powerdvd-download-50794.html
    Download the RI binary and source of Java TV API 1.1
    http://java.sun.com/javame/technology/javatv/index.jsp
    Since I am too lazy to use anything but the latest 1.6 JRE as a runtime, I have to fix
    com.sun.tv.media.util.MediaThread
    to comment out its stop() method. This is becase stop() was deprecated and made final in J2SE 1.5
    http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Thread.html#stop()
    http://java.sun.com/j2se/1.5.0/docs/guide/misc/threadPrimitiveDeprecation.html
    Next, I had to mae a change to Sun's JavaTV implementation to keep the GunBunny demo happy by providing a ServiceContext. The RunXlet program calls SIEmulator, but that environment does not provide a ServiceContex, so I added one back in:
    com.sun.tv.receiver.SIEmulator
    private static ServiceContext svcctx = null;
    Add before every call to new AppSignalEvent() and add the svcctx as the second-to-last argument:
    if(svcctx == null){ try { svcctx = new com.sun.tv.ServiceContextImpl(); }catch (Exception e){ e.printStackTrace(); } }
    I then had to hack a few PowerDVD classes, which is evil of me. First, I had to build an empty class by the name of
    sun.util.BDJPlugin
    becuase some PowerDVD class extends it but it is not in its BDJ.jar and then I had to reverse-compile (evil!) and modify one of their internal classes to avoid a dependency on their native methods. What I ended up with was a hacked version of com.cl.bdj.helper.CUtil to avoid the native methods which access the registry where they query for registry settings but also provide a default value (which I return).
    com.cl.bdj.helper.CUtil
    private static String pGetRegistryString(long i ,String string ,String string3) {
    return string3;
    private static int pGetRegistryInt(long i ,String string ,int j) {
    return j;
    The last thing I had to do was to change com.hdccookbook.gunbunny.BaseXlet, to use the JavaTV container rather than the org.havi one:
    import javax.tv.graphics.TVContainer;
    import java.awt.Container;
    change
    // protected HScene scene;
    protected Container scene;
    public final void run() {
    // waitForPresenting();
    // scene = HSceneFactory.getInstance().getDefaultHScene();
    scene = TVContainer.getRootContainer(xletContext);
    In order to having working keys, I had to add the KeyListener interface to BaseXet and
    run(){
    addKeyListener(this);
    and then add a near duplicate of the org.dvb.event.UserEvent* stuff that is already there:
    public void keyPressed(KeyEvent e){
    switch(e.getKeyCode()){
    case KeyEvent.VK_0:
    case KeyEvent.VK_1:
    case KeyEvent.VK_2:
    case KeyEvent.VK_3:
    case KeyEvent.VK_4:
    case KeyEvent.VK_5:
    case KeyEvent.VK_6:
    case KeyEvent.VK_7:
    case KeyEvent.VK_8:
    case KeyEvent.VK_9:
    numberKeyPressed(e.getKeyCode() - KeyEvent.VK_0);
    break;
    case KeyEvent.VK_ENTER:
    enterKeyPressed();
    break;
    case KeyEvent.VK_LEFT:
    arrowLeftKeyPressed();
    break;
    case KeyEvent.VK_RIGHT:
    arrowRightPressed();
    break;
    case KeyEvent.VK_UP:
    arrowUpPressed();
    break;
    case KeyEvent.VK_DOWN:
    arrowDownPressed();
    break;
    public void keyReleased(KeyEvent e){
    // System.out.println("Released: e="+e+" code="+e.getKeyCode());
    public void keyTyped(KeyEvent e) {
    // System.out.println("Typed: e="+e+" code="+e.getKeyCode());
    It then comes up and functions, but the rendering is not very good. Again, this is complete hack. Running the Java TV 1.1 RI in a JRE 1.6 is not supported. If you try to run any of the other examples, you will discover that the XML parsing is broken in JRE 1.6 with this message:
    Parsing failed: com.sun.org.apache.xerces.internal.impl.io.MalformedByteSequence
    Exception: Invalid byte 1 of 1-byte UTF-8 sequence., file: lib\JavaTVSampleFile01.xml
    and you have to go and change the lines in
    lib\JavaTV.properties
    from
    ServiceFileHandler=com.sun.tv.receiver.ReceiverFile
    # ServiceFileHandler=SampleData_01
    to
    # ServiceFileHandler=com.sun.tv.receiver.ReceiverFile
    ServiceFileHandler=SampleData_01
    and build samples\db\SampleData_01.java and put it in your classpath along with all these other hacks.
    Nonetheless, if you want to develop a somewhat generic Xlet that uses some BD-J features, that is how you might do it. But the moment you exercise anything else in the vendor's BDJ.jar that simply doe snot work outside of their environment or invokes one of their native methods, you are again stuck.
    It would be nice if Sun would at least bother to update the JavaTV RI with the fixes I hae mentioned. Their "jmflite" implementation does not render perfecly but at least it would give the programmer something to work with without having to deal with an older JRE, etc.
    Andrew
    Edited by: AndrewMorrow on Oct 20, 2008 2:48 AM

  • I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

    I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add?  Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

    A simple text page like this:
    Heading
        sub heading
              text paragraph ....
    Is traditionally represented by html tags like:
    <h1>Heading</h1>
         <h2>sub heading</h2>
              <p>text paragraph ... </p>
    I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
    This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
    I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

  • Source code not generated in mapping

    Hi,
      I tried mapping an Idoc to an XSD in my mnessage mapping.When I try to check my message mapping I get an error msg : "<Mappingname> has no Source Code"...My scenario is only some fields of Idoc map to the XSD and the rest are constants..I am in XI3.
    Any help is appreciated...
    -Teresa

    Hi Teresa,
    Have you tried deleting the map and re-doing it ? Or is this unfeasible ?
    Cheers
    Colin

  • Ask again:  Where can I find source code for CPRM algorithm?

    Hi, everyone.
    Where can I find reference implementation or some sample codes for CPRM(content protection for recordable media) algorithm? Can anyone help?
    Information about CPRM can be find here,
    http://www.4centity.com/
    JAVA version is preferred and C/C++ implementation is also OK.
    Thanks in advance,
    Geo

    Thanks, edsonw buddy!
    I only found C2 cipher source code and some other documents dealing with CPRM algorithm. And what I want is total CPRM implementation reference source code (C2 is only a basic module of CPRM algorithm).
    So can you provide me some useful information dealing with how to get total CPRM implementation reference source code? Both JAVA and C/C++ will be OK.
    Have a wonderful weekend,
    George

  • Functional Module:Need  some sample source code.

    Hi All,
    I have created  a customized table   u2018ZStock_Order_Dealeru2019 with the following fields:
    Stock_Order_Dealer
    Dealer Number
    S2D order Number     
    Line item Number     
    Material Number     
    Ordered Quantity     
    Batch Number     
    Received Quantity     
    S2D from D2G     
    Receiving Date
    I need to  create a remote enabled function module in CRM system to fetch the u2018Batch Numberu2019 and u2018Received Quantityu2019 fields when the Material Number is fed to it.Please note that the input and output should be tables.
    Could some one please give some sample source code for this.

    I used table types and select queries to resolve this problem.

  • How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

    Hi,
    I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
    "Windows Embedded CE 6.0 USB camera Driver" downloaded from:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
    does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
    image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
    the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
    ("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should 
    be in C# but C++ will be fine also.
    Thanks,
       Paul

    i get this on the hyperterminal when i run the cameradshowapp.exe
    Compulab Windows CE NAND X-Loader for CM-T35                                           
    Built Dec 20 2009 at 16:48:16                            
    Version 1.01.222               
    Commit Date 16/12/09                   
    Jumping to bootloader                    
    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:                                                                               
    46:16    
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b                                                    
    Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10                                                                           
    Version 1.01.222               
    OMAP3430 Version 0x4b7ae02f (Unknown)                                    
    TPS659XX Version 0x10 (ES2.x)                            
    -OEMPinMuxSetup....                  
    System ready!            
    Preparing for download...                        
    INFO: Predownload               
    +FMD_Init        
    Checking bootloader blocks are marked as reserved (Num = 6)                                                          
    +FMD_Init        
    WARN: Boot config wasn't found, using defaults                                             
    +FMD_Init        
    OALFlashStoreOpen: 4096 blocks, 64 sectors/block                                               
    OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks                                                       
    Calling LCD_TurnOn                 
    +FMD_Init        
    +FMD_Init        
    BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua                                                                               
    l size =0x4d3a!!!                
    Hit space to enter configuration menu 5...                                         
    Hit space to enter configuration menu 4...                                         
    Hit space to enter configuration menu 3...                                         
    Hit space to enter configuration menu 2...                                         
    Hit space to enter configuration menu 1...                                         
    INFO: Boot Device location = 0x8000020                                     
    Load NK image from flash memory                              
    +FMD_Init        
    ROMHDR (pTOC = 0x823b8c28) ---------------------                                               
      DLL First           : 0x4001c001                                 
      DLL Last            : 0x41c7c0d8                                 
      Physical First      : 0x84001000                                 
      Physical Last       : 0x863bbdec                                 
      Num Modules         :        294                                 
      RAM Start           : 0x863c0000                                 
      RAM Free            : 0x863d5000                                 
      RAM End             : 0x90800000                                 
      Num Copy Entries                        
      Copy Entries Offset : 0x85256e38                                 
      Prof Symbol Length  : 0x00000000                                 
      Prof Symbol Offset  : 0x00000000                                 
      Num Files           :        116                                 
      Kernel Flags        : 0x00000002                                 
      FileSys RAM Percent : 0x00000020                                 
      Driver Glob Start   : 0x00000000                                 
      Driver Glob Length  : 0x00000000                                 
      CPU                 :     0x01c2                                 
      MiscFlags           :     0x0002                                 
      Extensions          : 0x84002020                                 
      Tracking Mem Start  : 0x00000000                                 
      Tracking Mem Length : 0x00000000                                 
    NK Image Loaded            
    Launch Windows CE image by jumping to 0x80001000...                                                  
    Windows CE Kernel for ARM (Thumb Enabled) Built on Apr  5 2011 at 17:47:22                                                                         
    +OEMInit       
    ýSETDATAOUT access is OK....                           
    Forcing clean boot                 
    MainMemoryEndAddress = 0x90800000                                
    -OEMInit       
    +FMD_Init        
    Dumping registry defined VK                          
    Row 0:  0x18    0x9     0x25    0x0     0x0     0x0                                                  
    Row 1:  0x26    0xd     0x28    0x0     0x0     0x0                                                  
    Row 2:  0x27    0x24    0x23    0x0     0x0     0x0                                                  
    Row 3:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    Row 4:  0x0     0x0     0x0     0x0     0x0                                             
    Row 5:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    SMSC922x: Core Ethernet Init.                            
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:0a:a0:db                                        
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:09:88:80                                        
    SDIO8686: Loading Driver [version = 38.p44]                                          
    SDIO8686: Reset with TPS GPIO 2 --> done                                       
    !!!Kernel mode PSL 'PRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'HRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'FRdr' de-registered!!!                                         
    EHCI USB Host: HcdPdd_Init+                          
    [OTG] OMAPMHSUSBOTG::Init()+                           
    OMAPMHSUSBOTG::PostInit(): Start.                                
    DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52                                                                   
    Display parameters:                  
            Height = 0x280                     
            Width = 0x1e0
            HSW = 0x20
            HFP = 0x8
            HBP = 0x17
            VSW = 0x1
            VFP = 0x4
            VBP = 0x3
            DVI is not enabled
            PixelClkDiv = 0x7
            LogClkDiv = 0x1
            ClkSelDSS = 0x5
    TD035:: LCDTurnOn
    TD035STEE1: Turned display on.
    TD035:: Finished LCD VGA init
    AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
    Can't open HKEY_LOCAL_MACHINE\Startup key.
    [WiFi]: Firmware Version: 9.70.3.23
    CCaptureFramework: Failed setting up the camera data.
    CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
    eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
    CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
     camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
    eFramework: Retrieving the still stream config failed.
    CameraDShowApp: Initializing the capture graph failed.

  • Cannot find source code for Employee Benefit application

    Hello,
    I am trying to find the Employee Benefit Sample Application which used to be provided by Oracle at http://otn.oracle.com/sample_code/products/ias/content.html. Unfortunately I couldn’t find the source code anywhere, neither by searching through oracle sites, nor through the internet.
    Could someone please help me get it, since I just started working on applications based on this model and it is really important for me to have a complete example that works.
    Thanks in advance,
    Stefanos

    Hello,
    This sample application used to work on older versions which is no longer supported. This is the reason, it has been removed.
    Thanks.

  • I need Expert Decomposition of classes in Source Code for my reaserch purpose. Any body can help me in this regard?

    <blockquote>Locked by Moderator as a duplicate/re-post.
    Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=698286&forumId=1]
    Thanks - c</blockquote>
    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    I need Expert Decomposition of classes in Source Code of Firefox for my research purpose. Any body can help me in this regard?
    == This happened
    ==
    Not sure how often
    == Firefox version
    ==
    3.0.19
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.19) Gecko/2010031422 Firefox/3.0.19
    == Plugins installed
    ==
    *-Default Plug-in
    *RealPlayer(tm) LiveConnect-Enabled Plug-In
    *6.0.12.1662
    *Office Plugin for Netscape Navigator
    *Google Update
    *Shockwave Flash 10.1 r53
    *Yahoo Application State Plugin version 1.0.0.7
    *Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
    *Adobe PDF Plug-In For Firefox and Netscape
    *DRM Netscape Network Object
    *Npdsplay dll
    *DRM Store Netscape Plugin

    Please let me tell you that I Expert Decomposition may be of any Version of Firefox or Thunder Bird.

  • Source code has syntax error in SAP PI7.1 Mapping Test

    HI All,
    IN SAP P7.1  created simple two data types, message types and Message Mapping with only 2 fields. While testing the mapping in Message Mapping it is giving the error as
    Source text of object Message Mapping: MM_Source_to_Target | http://abc.com has syntax errors:
    Source code has syntax error:
    I am able to activate the Datatypes and Message Types but not able to activate the Messge mapping.
    Please if any body faced the same problem please give the solution.
    One more thing is I am able to test the Message Mapping available in BASIS 7.1 Software Component objects. It is executing successfully...
    but otherthan this SWC it not working success fully.....
    Regards
    Sridhar Goli

    Hi David,
    please check the default trace. It may contain the entry:
    Error in compiling : java.io.IOException: Not enough space
    If that's the case, maybe there's too little space for the swap file/device.
    You should ensure that at least 2X (preferably 3X) of Heap (-Xmx) is configured as real swap
    Hope that helps.
    Regards,
    Gábor Klauzer

  • Sample  PL/SQL Portlet Source Code for Oracle Portal 9ias

    Hi, I'm a newbie of Oracle Portal technology, and I have a problem:
    I would create a PL/SQL portlet that realizes the following functions:
    1) Retrieve the username of the portal user logged from WWCTX_API.GET_USER function.
    2) Insert into an oracle db table two values about two hidden fields in the HTML FORM of the portlet.
    3) Realize the insert commit through the click on the submit button on the Html form of the portlet. I would redirect by the same button to an other page url also.
    I've never developed in Portal, and may be useful if someone could post me the source code of the SHOW MODE SECTION in the PROCEDURE SHOW of a SAMPLE PL/SQL PORTLET that realizes the upper functions.
    Thanks a lot....

    Hi
    Here's the code from Helloworld_Portlet example:
    procedure show
    p_portlet_record wwpro_api_provider.portlet_runtime_record
    is
    l_portlet wwpro_api_provider.portlet_record;
    begin
    if (not is_runnable(
    p_provider_id => p_portlet_record.provider_id
    ,p_reference_path => p_portlet_record.reference_path)
    ) then
    raise wwpro_api_provider.PORTLET_SECURITY_EXCEPTION;
    end if;
    Retrieve the portlet information.
    l_portlet := get_portlet_info(
    p_provider_id => p_portlet_record.provider_id
    ,p_language => p_portlet_record.language
    if (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW) then
    if (p_portlet_record.has_title_region) then
    Draw the portlet header and specify what links are available
    from that header (i.e. details, customize, help, and about).
    The has_title property is set at the page region level.
    wwui_api_portlet.draw_portlet_header
    p_provider_id => p_portlet_record.provider_id
    ,p_portlet_id => p_portlet_record.portlet_id
    ,p_title => l_portlet.title
    ,p_has_details => true
    ,p_has_edit => true
    ,p_has_help => true
    ,p_has_about => true
    ,p_referencepath => p_portlet_record.reference_path
    ,p_back_url => p_portlet_record.page_url
    end if;
    Draw the portlet borders.
    The has_border property is set at the page region level.
    wwui_api_portlet.open_portlet(p_portlet_record.has_border);
    Display the content of the portlet in the show mode.
    Use the wwui_api_portlet.portlet_text() API when
    generating the content of the portlet so that the
    output uses the portlet CSS.
    htp.p(wwui_api_portlet.portlet_text(
    p_string => 'Hello World - Mode Show'
    ,p_level => 1
    if (p_portlet_record.has_border) then
    wwui_api_portlet.close_portlet;
    end if;
    elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_ABOUT) then
    Display the about page for the portlet.
    htp.p('Hello World - Mode Show About');
    elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_EDIT) then
    Display the edit page for the portlet.
    htp.p('Hello World - Mode Show Edit');
    elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_HELP) then
    Display the help page for the portlet.
    htp.p('Hello World - Mode Show Help');
    elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_EDIT_DEFAULTS) then
    Display the edit defaults page for the portlet.
    htp.p('Hello World - Mode Edit Defaults');
    elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_DETAILS) then
    Display the details page for the portlet.
    htp.p('Hello World - Mode Show Details');
    elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_PREVIEW) then
    Display the preview page for the portlet.
    htp.p('Hello World - Mode Show Preview');
    end if;
    end show;
    I think you need to add this:
    You can get the values of your html-form with this command:
    v_hidden_1 varchar2(256);
    v_hidden_2 varchar2(256);
    v_hidden_1 := wwpro_api_parameters.get_value('name_of_hidden_1_in_html_form','p');
    v_hidden_2 := wwpro_api_parameters.get_value('name_of_hidden_2_in_html_form','p');
    You can get the actual URL with this command:
    v_url := p_portlet_record.page_url;
    Hope that helps.
    Regards,
    Mark

  • Sample source code (fmb)

    I am new in oracle development. I need sample code for oracle 10g forms builder.
    I notice that This is the thing which is not even in the knowledge of Google.
    I am wondering that why oracle forms's source code is not available on web. while if we talk about other tools like .net or php! thousands of sample codes are available for almost all kind of the requirements to do a job.
    I shall be very thankful if someone provide me some sample codes (fmb, rdf etc)
    Thanks

    Hi
    Oh yes i do agree with cris u can also search for video samples it's available specially for beginners,but pls notice one thing that PHP is an Open Source like Java and yes .net is also very common it only needs trust & a little light of hope that u can get it :)
    Well for me i can provide u with such sites of Oracle as tutorials besides the sites that InoL & Chris had provided like
    iSelfSchooling ....
    Oracle PL/SQL – Forms samples for François Degrelle
    Forms samples for Andreas Weiden ....
    For the tutorials
    Oracle Forms Developer ....
    A Tutorial on Oracle9i Forms and Reports
    Pls have a look here for Oracle Forms 11g Release 1 (11.1.1) Documentation ... & Oracle Forms 10g(10.1.2) Documentation.
    Hope this helps...
    Regards,
    Amatu Allah.

  • Source code for "Creating an Extended Web Dynpro Application"?

    Hello!
    I'm a rookie in the field of SAP Netweaver and I'm justing getting started with some tutorials. My problems with "Creating an Extended Web Dynpro Application" are to massive to be posted on this forum in this stage. What I want to have some help with is to find the source code for that tutorial so I can get som guidence from there.
    Following text is cut out of this page:
    http://help.sap.com/saphelp_nw70/helpdata/EN/5d/f42fef2eec724597a03b6bcc670c2c/frameset.htm
    Creating an Extended Web Dynpro Application
    You can download the Web Dynpro project for the current tutorial from the Software Developer Network SDN (http://sdn.sap.com -> Web Application Server -> Web Dynpro -> Sample Applications and Tutorials) in two versions: one skeleton version you can use for exercises and one final version (solution) for an immediate build, deployment and run on the Java engine of the SAP Web Application Server.
    How hard I try I can't find the specific source code on sdn.sap.com
    Does anyone have a clue where it is?
    Thanks!
    Best regards
    /Johan Månsson Lindströ

    Hi!
    I did what you said but I seem to miss the IDE folder. This is what it looks in my Explorer
    C: > Program Files > SAP > IDE > CE > eclipse > (no folder called "examples")
    I also did a search in this eclipse folder for "examples" but I did'nt find the example I'm looking for
    I am running a newer version of NWDS:
    SAP NetWeaver Developer Studio
    SAP NetWeaver 7.1 Composition Environment SP03 PAT0000
    Maybe that's why things don't look the same?

  • Source code for 2d cross-correlation fx?

    I know this is a long shot but does anyone have the c or c++ code to compute the 2d (image) cross-correlation fx? (I know that IMAQ VISION has the cross-correlation routine but I am looking to potentially modify the 2d correlation routine to compute something called non-symmetry coefficient and would need to start with the source code). Or, labview source code for this operation would also be quite acceptable and in fact preferred!!
    Thanks,
    Don

    I don't have the 2D cross correlation in labview, but... isn't the cross correlation very similar to an FFT? In that case a 2D FFT could maybe help since it shows how the 2D FFTs are derived from 1D FFTs in labview. I attach an llb where 2D FFT is done. I don't know where I got it from, maybe I even wrote it myself sometime in the dark past (probably translating it from some piece of C source code from the 'Numerical Recipes' book).
    Maybe it is of some help for you...
    -Franz
    Attachments:
    2dfft.llb ‏46 KB

Maybe you are looking for

  • PSE5 organizer on Windows 7 64-bit hangs on one catalog

    Okay, I know using PSE5 on Win7 64-bit isn't officially supported, but a lot of people seem to be having success. I'm migrating from XP, and backed up my catalog of 17000+ pictures.  When I installed PSE5 (and 5.0.2 patch) on Vista 64-bit, PSE restor

  • Apple tv to component video

    How to connect Apple Tv3 to Panasonic component TV

  • FCS2 Update dilemma

    I want to update using the update method mentioned when you have ozone problems. In a previous post there are steps to remedy this by installing the 2007 updates in order before installing all other FCS apps. I've just been on the update page and the

  • Date Format Conversion from MM.DD.YYYY to YYYYMMDD

    Hi All, I am trying to load data from r/3, and i have date format as MM.DD.YYYY in source system.how can i convert this into YYYYMMDD format in transfer rules(I know that we have to write a routine in transfer rules).Could anybody help me out pl?..pl

  • Sap test system needed / sap test system gebraucht

    Hi, maybe somebody of you could give some hint where I can find a test system for sap in a downloadable version 4.5 upwards. I have an sap mini basis system (mbs) in the version 4.6 (c) , but no valid license key on hand due to the fact that the old