Text 4030100048 ID F02 language EN not found error while running PO

Hello friends,
If i add schema group in XK02 for that particular PO vendor ... i.e for Pricing procedure ... i'm getting this error .. i'm unable to see printpreview of PO .
please help me out. i f i won't use that schea group then its coming properly ...please its urgent ..
Thanks& Regards
Lavanya

Hi!
If you check the texts in the 4030100025 order with transaction ME23N, you'll see, it is not filled on the system, when the error occurs.
Try it like this: open the ME23N, choose TEXTs tab on header part. Choose header text. Double click on the texts editor area. A larger editor will open. Here choose Goto-Header and you'll see the technical data of the text.
In this case it is "F01", so the text below this one, will be the "F02". And it is not filled in your case, that's why it occurs "error".
Regards
Tamá

Similar Messages

Class not found error while running a JSP App

Hi everybody,
          I am getting the following error while try to run a JSPApp using JBuilder
          and weblogic server 6.1.
          C:\JBuilder6\jdk1.3.1\bin\javaw -classpath "C:\BEA
          Home\wlserver6.1\lib\weblogic.jar;C:\BEA
          Home\wlserver6.1\lib\weblogic.jar;C:\JBuilder6\jdk1.3.1\demo\jfc\Java2D\Java
          2Demo.jar;C:\JBuilder6\jdk1.3.1\jre\lib\i18n.jar;C:\JBuilder6\jdk1.3.1\jre\l
          ib\jaws.jar;C:\JBuilder6\jdk1.3.1\jre\lib\rt.jar;C:\JBuilder6\jdk1.3.1\jre\l
          ib\sunrsasign.jar;C:\JBuilder6\jdk1.3.1\lib\dt.jar;C:\JBuilder6\jdk1.3.1\lib
          \htmlconverter.jar;C:\JBuilder6\jdk1.3.1\lib\tools.jar" -ms64m -mx64m -Djav
          a.library.path=C:/BEA Home/wlserver6.1/bin -Dbea.home="C:/BEA
          Home" -Dweblogic.Domain=mydomain -Dweblogic.Name=myserver -Djava.security.po
          licy==C:/BEA
          Home/wlserver6.1/lib/weblogic.policy -Dweblogic.management.password=suresh74
          weblogic.Server
          java.lang.NoClassDefFoundError: Home/wlserver6/1/bin
          Exception in thread "main"
          i didn't understand where it is picking the path Home/wlserver6/1/bin.
          I am really frustrated with this.
          Can any one over there Have any Idea or gone through this, please help me ,
          I would be thankfull to them.
          Thank you,
          -Suresh


Hi.
          Try putting double quotes around your java.library.path definition - I think it
          can't handle the space in the string. So change:
          -Djava.library.path=C:/BEA Home/wlserver6.1/bin
          to
          -Djava.library.path="C:/BEA Home/wlserver6.1/bin"
          Regards,
          Michael
          Suresh Babu wrote:
          > Hi everybody,
          >
          > I am getting the following error while try to run a JSPApp using JBuilder
          > and weblogic server 6.1.
          > C:\JBuilder6\jdk1.3.1\bin\javaw -classpath "C:\BEA
          > Home\wlserver6.1\lib\weblogic.jar;C:\BEA
          > Home\wlserver6.1\lib\weblogic.jar;C:\JBuilder6\jdk1.3.1\demo\jfc\Java2D\Java
          > 2Demo.jar;C:\JBuilder6\jdk1.3.1\jre\lib\i18n.jar;C:\JBuilder6\jdk1.3.1\jre\l
          > ib\jaws.jar;C:\JBuilder6\jdk1.3.1\jre\lib\rt.jar;C:\JBuilder6\jdk1.3.1\jre\l
          > ib\sunrsasign.jar;C:\JBuilder6\jdk1.3.1\lib\dt.jar;C:\JBuilder6\jdk1.3.1\lib
          > \htmlconverter.jar;C:\JBuilder6\jdk1.3.1\lib\tools.jar" -ms64m -mx64m -Djav
          > a.library.path=C:/BEA Home/wlserver6.1/bin -Dbea.home="C:/BEA
          > Home" -Dweblogic.Domain=mydomain -Dweblogic.Name=myserver -Djava.security.po
          > licy==C:/BEA
          > Home/wlserver6.1/lib/weblogic.policy -Dweblogic.management.password=suresh74
          > weblogic.Server
          >
          > java.lang.NoClassDefFoundError: Home/wlserver6/1/bin
          >
          > Exception in thread "main"
          >
          > i didn't understand where it is picking the path Home/wlserver6/1/bin.
          >
          > I am really frustrated with this.
          >
          > Can any one over there Have any Idea or gone through this, please help me ,
          > I would be thankfull to them.
          >
          > Thank you,
          > -Suresh
          Michael Young
          Developer Relations Engineer
          BEA Support

Error while creating so "Text 0000001025 ID 0012 language EN not found

Dear Sirs,
I am creating sales order but when i enter the material i am getting an error message
"Text 0000001025 ID 0012 language EN not found
Message no. TD600
Diagnosis
You want to read a text which does not exist in the data base (or update memory).
System Response
Reading could not be carried out.
Procedure
You need to create this text:
1. Initialization (module INIT_TEXT)
2. Save (module SAVE_TEXT)"
Can any one please let me know what i am doing wrong?
Thank & regards,
Sameer

Hi,
I hope its an error related to ABAP developements,either smartforms or reports related so you consult your abaper to resolve it.
Here is an sample ABAP code using the READ_TEXT function module without Exceptions uncommented.
This sample ABAP code is taken from a SAP Smartform which is created for SAP invoice output document.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = 'ZI01' " Billing Item Text
language = 'I'
name = lv_name " Invoice
object = 'VBBP' " Billing
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
*IMPORTING
HEADER =
tables
lines = lt_lines
*EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thank you

Long Text 0000000015120044ZOH ID ZOH language EN not found

Hi Good day,
i am trying to Create, Save and Read the long Text.
for that i have done the following.
1. SE75 Created the Object and Object ID Ex :
Now when i implement the logic in the Program,
at the end when i execute ,
1. it does the CALL FUNCTION 'INIT_TEXT' successfully , SAVE_TEXT Successfully but when i try to READ_TEXT it says
Text 0000000015120044ZOH ID ZOH language EN not found
this is my logic
TABLES : ZEHS00_EXA_CARD.
PARAMETERS SRV_NUM TYPE CHAR16.
DATA: textname         LIKE thead-tdname,
        func,
        co_co            LIKE sy-index.
* Interne Tabellen
DATA t_tf02hz LIKE thead OCCURS 0 WITH HEADER LINE.
DATA t_tf02lz LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: ltxtflg             LIKE bapistdtyp-boolean.
DATA : l_text_tab LIKE tline OCCURS 100 WITH HEADER LINE.
DATA: ltxtflg1             LIKE bapistdtyp-boolean.
DATA : l_text_tab1 LIKE tline OCCURS 100 WITH HEADER LINE.
DATA : description(225).
DATA : description1(225).
DATA: line(132) TYPE c,
       text_tab LIKE STANDARD TABLE OF line,
       text_tab1 LIKE STANDARD TABLE OF line,
       WA_TAB LIKE STANDARD TABLE OF LINE,
       WA_TAB1 LIKE LINE OF text_tab1,
       field LIKE line.
DATA: line1(132) TYPE c,
       field1 LIKE line.
DATA: e_header TYPE thead,
    i_header TYPE STANDARD TABLE OF thead,
    w_tline   TYPE tline,
    i_tline   TYPE STANDARD TABLE OF tline WITH HEADER LINE.
e_header-tdobject = 'ZSYS_ACT1'.
e_header-tdid = 'ZOH'.
e_header-tdspras = sy-langu.
e_header-tdlinesize = 072.
CONCATENATE SRV_NUM e_header-tdid     INTO textname.
CALL FUNCTION 'C14G_TEXT_INPUT_EDIT'
     EXPORTING
       i_windowtitle           = 'Systolic action Description'
       i_tablename             = 'CCIHT_IP'
       i_fieldname             = 'ACDESC'
       i_language              = sy-langu
       i_actype                = 'X'
     TABLES
       x_text_tab              = l_text_tab
     CHANGING
       x_text                  = description
       x_ltxtflg               = ltxtflg.
CALL FUNCTION 'INIT_TEXT'
   EXPORTING
     id       = 'ZOH'
     language = sy-langu"'E'
     name     = textname
     object   = 'ZSYS_ACT1'
   IMPORTING
     header   = t_tf02hz
   TABLES
     lines    = t_tf02lz.
LOOP AT l_text_tab.
   MOVE :l_text_tab-TDLINE TO LINE.
   APPEND line TO t_tf02lz.
ENDLOOP.
CONCATENATE SRV_NUM e_header-tdid     INTO e_header-tdname.
** APPEND 'DevComments for Obj 1' to i_tline.
CALL FUNCTION 'SAVE_TEXT'
   EXPORTING
     client          = sy-mandt
     header          = e_header
     savemode_direct = 'X'
   TABLES
     lines           = i_tline
   EXCEPTIONS
     id              = 1
     language        = 2
     name            = 3
     object          = 4
     OTHERS          = 5.
CLEAR : l_text_tab[].
CALL FUNCTION 'READ_TEXT'
                   EXPORTING
                    CLIENT                        = SY-MANDT
                     ID                            = 'ZOH'
                     LANGUAGE                      = 'E'
                     NAME                          = e_header-tdname"textname
                     OBJECT                        = 'ZSYS_ACT1'
                   TABLES
                     LINES                         = l_text_tab."t_tf02lz.
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
IF     l_text_tab[] IS NOT INITIAL.
ENDIF.
thank you,
J.

Hi,
Go to tcode SE11 check table STXH whether the text stored in it. If yes, then see the layout of field TDNAME.
Thanks.
Regards,
Keng Haw

Quicktime gets a file not found error in running of set up. tried downloading twice

Quicktime gets a file not found error in running of set up. tried downloading twice

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

Class not found error while accessing a Web Service

Hi All,
Im getting a Class not found error while doing method calls of a third party API.
The required jars(axis.jar) are set in the weblogic 8.1 classpath and I tried putting those jars(axis.jar) in my application lib folder also, but dint help. Please help me with a solution.
I'll paste the exception logs here by
java.lang.NoClassDefFoundError: org/apache/axis/AxisFault
at java.lang.ClassLoader.defineClass(Ljava/lang/String;[BIILjava/security/ProtectionDomain;)Ljava/lang/Class;(Unknown Source)
        at java.security.SecureClassLoader.defineClass(Ljava/lang/String;[BIILjava/security/CodeSource;)Ljava/lang/Class;(SecureClassLoader.java:123)
        at java.net.URLClassLoader.defineClass(Ljava/lang/String;Lsun/misc/Resource;)Ljava/lang/Class;(URLClassLoader.java:251)
        at java.net.URLClassLoader.access$100(Ljava/net/URLClassLoader;Ljava/lang/String;Lsun/misc/Resource;)Ljava/lang/Class;(URLClassLoader.java:55)
        at java.net.URLClassLoader$1.run()Ljava/lang/Object;(URLClassLoader.java:194)
        at jrockit.vm.AccessController.do_privileged_exc(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;I)Ljava/lang/Object;(Unknown Source)
        at jrockit.vm.AccessController.doPrivileged(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;)Ljava/lang/Object;(Unknown Source)
Thanks
Noufal

Hi,
Verify the 3rd party class files names are correctly written in your program. Sometimes wrong case might be the reason.
bye for now
sat

Operation not found error while calling AM methods from managed bean

Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
Satya

Hi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan

It shows the log sequence not found error while all the log seqences exist?

Why the database shows the log sequence not found error while all the log seqences exist?
SQL> select*from v$log_history;
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
1 657328345 1 1 519368 13-JUN-08 543434
519368 13-JUN-08
2 657370849 1 2 543434 13-JUN-08 567705
519368 13-JUN-08
3 657373012 1 3 567705 14-JUN-08 570408
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
4 657373039 1 4 570408 14-JUN-08 570464
519368 13-JUN-08
5 657374623 1 5 570464 14-JUN-08 573505
519368 13-JUN-08
6 657375015 1 6 573505 14-JUN-08 573856
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
7 657376537 1 1 570465 14-JUN-08 573543
570465 14-JUN-08
8 657377084 1 2 573543 14-JUN-08 575109
570465 14-JUN-08
9 657377094 1 3 575109 14-JUN-08 575114
570465 14-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
10 657377103 1 4 575114 14-JUN-08 575121
570465 14-JUN-08
11 657377106 1 5 575121 14-JUN-08 575123
570465 14-JUN-08
11 rows selected.
RMAN> flashback database to sequence=10 thread=1;
Starting flashback at 14-JUN-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=155 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of flashback command at 06/14/2008 13:03:15
RMAN-20206: log sequence not found in the repository

Apart from the output being hardly readable (please refer to the FAQ in the right upper hand corner how to post output), I don't see any sequence 10.
You seem to mistake the column recid for the sequence column.
The sequences are listed in -not surprisingly- the sequence# column.
Sybrand Bakker
Senior Oracle DBA

Page not found Error while open install app

I go through the all necessary steps to configure app domain & steps to create SharePoint hosted app still got 'page not found error'
The final app URL that i got afte r open install app -"http://app-125e72eedbe144.domain name:9922/FirstApp/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fsp1%3A9922&SPLanguage=en-US&SPClientTag=6&SPProductNumber=15.0.4420.1017&SPAppWebUrl=http%3A%2F%2Fapp-125e72eedbe144.domainname%3A9922%2FFirstApp"
i don't understand where i did mistake can any one help me to resolve that issue.

Hi,
According to your post, my understanding is that you get the “page not found” error while you open install app.
You need to have a SharePoint Web Application that is bonded to port 80 without a host header.
If you want to run it on https (SSL) then you also need to add an extra binding for SharePoint Hosted Apps to work.
For more information, please refer to:
Troubleshooting SharePoint 2013 Hosted Apps on-premises: “404 not found” error
404 & 401 Errors with the App Management Service - SharePoint
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Page not found error while opening sharepoint 2013 site

page not found error while opening sharepoint 2013 site
Please help me on this

Hi,
Please check the log file to find more information about this issue. The path of the log file is:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
In addition, please make sure the URL of the site is correct.
Please check whether you could access other pages in the problematic site.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

404 Not Found Error while testing INTEGRATION_DIRECTORY_HMI

Hi,
I am installing XI 3.0 SR1 on Win2000 sp4. I got struck at page 40 of installation guide trying to configure rfc destination INTEGRATION_DIRECTORY_HMI. I gave all the parameters as specified in the guide and clicked on "Test". I am getting the 404 Not Found error. The detalied error log is attached below. Can some one please let me know what could be the reason for the error?
Thanks
Sireesha
HEADER NAME                HEADER VALUE
~response_line               HTTP/1.1 404 Not Found
~server_protocol             HTTP/1.1
~status_code                 404
~status_reason               Not Found
connection                   close
pragma                       no-cache
cache-control                no-cache
expires                      0
content-type                 text/html
content-length               1539
server                       SAP J2EE Engine/6.40
date                         Fri, 03 Feb 2006 04:00:56 GMT
HTTP BODY
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html>
<head> <title>Error Report</title> <style> td {font-family : Arial,
Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style
> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmar
gin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpaddin
g="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"><font face="Arial, Verdana, Hel
vetica" size="4" color="#666666"><b>  404 &nbsp Not Found</b><
/font></td> </tr> <tr bgcolor="#3F73A3">     <td height="23" width="8
4"><img width=1 height=1 border=0 alt=""></td>     <td height="23"><img
width=1 height=1 border=0 alt=""></td>     <td align="right" height="2
3"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SA
P J2EE Engine/6.40 </b></font></td> </tr> <tr bgcolor="#9DCDFD">
    <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></
td> </tr> </table> <br><br><br><br><br><br> <p><font face="Arial, Ve
rdana, Helvetica" size="3" color="#000000"><b>  The requested
resource does not exist.</b></font></p> <p><font face="Arial, Verdana,
Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b>&nbsp
;Details:</b></td><td valign="top"><PRE>Go to <A HREF="/" target="_paren
t">main page</A> of this application!</PRE></font></td></tr></table></fo
nt></p> </body> </html>
Time (ms)                                134

Hi Sireesha -
>>>As per your suggestion. I am trying to reinstall the XI Component again. But the setup is not asking me for any uninstallation of the existing setup nor any message saying that you already have the XI Component installed. Does it mean that the XI Component got deleted automatically?
It's hard for me to say not being able to see your system, but here are some things you can check:
- check link http://<xi_host>:<j2ee_port>/sap/monitoring/ComponentInfo
You should be able to see components like SAP_XITOOL, SAP_XIAF, SAP_XIAFC which would indicate that XI components are installed. You need role SAP_J2EE_ADMIN to access this.
- Using SDM, you can see what's currently deployed in the SDM repository for XI related components.
- Using Visual Admin, you can look for XI related services within the Server instance.
But in any case, try reinstalling the XI Java components (which is really what you're installing following the SR1 Installation Guide). If you run into problems during the installation and it's possibly due to already existing XI components, I would recommend, cleaning the slate and uninstalling the J2EE Add-in and starting again from the J2EE add-in part. Instructions for deleting the add-in are in the corresponding WebAS Java 6.40 <platform/db> install guide (in the last section - "Additional Information").
Regarding the central adapter engine, yes, this is installed automatically when you do the main installation of the XI Java components. Instructions in the SR1 guide specifically referring to the Adapter Engine are for a decentral adapter engine.
Hope that helps.
Best regards,
Jin

FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1

FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
when this is extracted it leaves me with Disk1, 2, and 3
install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
i even triwd the same download from edelivery.oracle.com and gives the same madness
am stuck.

i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT.

"Page not found" error while trying to run a page

Hello all,
I tried to run a page in JDeveloper(9.0.6.6_606) and after the browser page pops up, it is displaying "HTTP 404 : Page not found" error.
Please find the log below:
C:\jdevbin\jdk\bin\javaw.exe -ojvm -classpath C:\jdevbin\j2ee\home\oc4j.jar -mx256m -Dhttp.proxyHost=proxy -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=10.200.152.236|localhost -Xverify:none com.evermind.server.OC4JServer -config C:\jdevhome\jdev\system9.0.3.1.1107\oc4j-config\server.xml
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
[waiting for the server to complete its initialization...]
Embedded OC4J startup time: 7047 ms.
Oracle9iAS (9.0.3.0.0) Containers for J2EE initialized
Embedded OC4J startup time: 16 ms.
Target URL -- http://10.200.152.236:8988/OA_HTML/runregion.jsp?page=%2Foracle%2Fapps%2Fpos%2Faccount%2Fwebui%2FNonPoInvCreatePG&akAppShortName=POS&akDbcFile=FIN1DEV2&akDevMode=1&akDiag=1&akPassword=pwd4dev2&akRespKey=ISUPPLIER_PORTAL_RESP&akUsername=dpsdx48&JRAD_XML_PATH=C%3A%5Cjdevhome%5Cjdev%5Cmyclasses%5CJRADXML%5C&JRADStartTime=1152606872484
ApplicationServer: appName = bc4j
ApplicationServer: appName = current-workspace-app
ApplicationServer: appName = soap
Error creating the ORB :
Starting an OA Core session ...
ICX DIAGNOSTIC: application_id = 177
ICX DIAGNOSTIC: responsibility_id = 23075
ICX DIAGNOSTIC: security_group_id = 0
ICX DIAGNOSTIC: APPS Web agent = http://app-fin1dev2.albertsons.com:15160/pls/FIN1DEV2/
FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX DIAGNOSTIC: mCookieHeader = FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX_DIAGNOSTIC: mEncryptedSessionID = C384A6C2A84C8E63FAA51365BA91681A
ICX_DIAGNOSTIC: mSessionID = 687703439
TIME: runregion.sessionBean.createSession [87296 ms]
ICX_DIAGNOSTIC: mTransactionID = 78453
ICX_DIAGNOSTIC: encryptedTransactionID = C974A13EBB894B23
TIME: runregion.sessionBean.createTransaction [9672 ms]
TIME: runregion.rest [0 ms]
Is there anything you think I am missing in the configurations?
Kindly help.

I am also using OA Framework Jdeveloper....for ADF BC development.. Please find the log below:-
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config>
E:\jdeveloper\jdevbin\jdk\bin\javaw.exe -client -classpath E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar;E:\jdeveloper\jdevbin\jdev\lib\jdev-oc4j-embedded.jar
-Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true
-Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\xml.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/lib/xml.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it
contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazn.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/j2ee/home/jazn.jar (from <code-source> in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different
versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazncore.jar (from manifest of /E:/jdeveloper/jdevbin/jdev/appslibrt/jazn.jar) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/j2ee/home/jazncore.jar (from <code-source> in META-INF/boot.xml in
E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the
search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib\uix2.jar (from
WEB-INF/lib/ directory in E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/jdev/appslibrt/uix2.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml). If it contains different versions of the same classes, it
will be masked as the latter is already visible in the search path of loader datatags.web.webapp:0.0.0.
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 19594 ms.
Target URL--- http://hydhtcl33997.ad.infosys.com:8988/SRTutorialADFBC-UserInterface-context-root/faces/app/SRList.jspx
07/10/18 11:56:56 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized

Command not found error while executing shell programs in terminal

I have written one sample shell program.
while executing shell program in terminal,it shows COMMAND NOT FOUND error.
How to slove this.

Post the "Actual" error. It says more than command not found.
Post your script.
Post the output from:
echo $PATH
Post the output from:
which name_of_command_not_found

Text 4030100048 ID F02 language EN not found error while running PO

Similar Messages

Maybe you are looking for