Text and/or repeating frames run off page ...

Please help. It's very hard to believe that Oracle Reports 6i does not have a way of keeping text and/or frames from running off the physical page. My frames and text boxes have thier vertical size set to variable, and I have set page protect to yes, although this does not seems to help.
Will setting the page length to the correct number of lines in between the margins help, there must be a way of keeping this from happening.....please help!

hello,
by setting the frame elasticity to variable, you allow the frames to shring and expand regardless of the page-size. to restrict it to a specific page size, the out-most frame must represent the boundries and must be set to fixed.
regards,
the oracle reports team

Similar Messages

Display 'continued' if repeating frame runs over to another page.

I have a repeating frame of wildly varying lengths. If I don't page protect the frame, then sometimes there are one or two lines that run over to the next page and get lost. If I do page protect the frame, sometimes very little prints on a page and I get large blank spaces.
Ideally, I'd like to take out the page protect and let the frame run over but add something like "continued on next page" before the page break and "continued from previous page" after the page break.
An ideas?
-Tracy

Hello,
"Want to print "contd." on each page except last page of report "
Re: Want to print "contd." on each page except last page of report
Regards

Repeating Frame over multiple pages

How can i streach a repeating frame over more pages without
getting: REP-1212 Object 'Body' is not fully enclosed by its
enclosing object ''

In the object Navigator go to the Section in which this Repeating Frame exists (For example, "Main Section"). Double click to invoke it's property inspector. Increase the "Horizontal Panels per page" or "Vertical Panels per Page" as per your need. By default both will be 1.
Thanks,
-Siva B

I put a vacation alert on my text and can't take it off.

I put a vacation alert on my iPhone 4 text and can't take it off. Help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Repeating Frames running over more than one page

Hi I have developed an Oracle Report. It is a nomination form having 7 to 8 pages. FYI..Input is a Pin Number. So, the customer can either enter one pin or can select many pins from the browser and depending on the selection he needs to either print one form or many forms at a stretch. So i want a repeating frame to be enclosed all the other frames. But if i do that, then i am getting an error
"REP-1212: Object R_13 is not fully enclosed by its enclosing body" since the repeating i introduced spans over all the pages in the report.
Please let me know the solution for this asap.
Thanks in Advance

Make sure the repeating frame is variable vertically and that all the frames that it encloses are variable.

How to find out no. of records or repeating frame in a page

Hi All,
How do I find out how many records have been displayed on a particular page?
I'm having a repeating frame, and I want to know print another item, on a condition that if the records printed on the page are less than 5 then it should be printed otherwise not.
The item to be printed is not a part of the repeating frame whoz occurences have to be counted.
Regards
Naveen

Hi Naveen
You can create a Packaged varaible that acts as
global variable , and you can increment this
variable in the repeating frames Format Trigger .
Based on the value of the variable , you can
return true or false for the item that you want to
display .

Printing text and images together on a single page (printjob)

Hello all,
how am I able to print both text and images on the same page (defined by one printjob), using the javax.print API?
It seems that one printjob (one page) can have only one flavor, that is text, or GIF, or JPEG, etc. Since the majority of print jobs out there usually require text and graphics on the same sheet this seems a bit strange.
I have resorted on creating a PDF file through the iText library, and then printing by converting to GIF (quality is significantly reduced though, not an option), or by using the Acrobat Reader command line from java (looks dangerous for batch printing). My printer does not support printing directly using the PDF flavour.
So, I solved the problem by converting to PDF, but printing is still cumbersome. Any other ideas?
Thank you for your time,
Ari.

TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Box containing text and image (fit frame to contents).

Hi all,
The best way I can describe what I am trying to achieve is to show you a picture.
So essentially, I'm looking to create a grey box, containing some text with an image floating to the right hand side. I want about 2mm space (padding) inside the grey box so no content goes right to the edge and I want the text to wrap around the image. The bit I'm finding tricky is when I go to use the 'Fit frame to content' option. I'm trying to remove the space indicated by the red arrows but if I anchor the image inside the text frame, the grey box shrinks to the height of the text and the image overflows.
This would be incredibly simple to achieve on the web, am I doing something wrong?
Any help/direction would be greatly appreciated.

Sorry, been out for an hour.
I understood that you want to have some variable height text frame (the gray box), and that this box should reduce in height to fit the text contained therein, but not less than necessary for the bottom to be 2mm below the bottom edge of the variable height image (which I'm presuming is anchored to the first line of text in the frame) in a case where there is not sufficient text for fit frame to content to avoide making the frame shorter than the bottom of the image.
I believe this could be scripted, but that will still require you to run the script. You should ask over in InDesign Scripting
As far as a container that holds both text and image frames, yes, but only if you "paste into" a new frame after creating the two separately and grouping, which probably is not what you have in mind.

Paste selected text AND images from a webpage to Pages/Word?

I'm a new Mac user (also running virtual Windows XP via vmware fusion), and I know next to nothing about my Mac. Please bear with me if this is something that has been answered (I looked, but didn't find a specific answer for my question...it may be here, but I can't find it).
On a Windows-based PC, all I need to do is select, copy, then paste into a Word document. All text and images would paste. I can't seem to figure out how to do that in Pages or Word (have MS Office for Mac, too).
Thanks for any help.

I suppose I was hoping I could do on my Mac, what I did on my Dell...that doesn't appear to be the case.
Specifically, I'm talking about clicking/dragging to select what I want (including images), opening a Word document then pasting everying, including ALL selected images. More specifically, at sites with game walkthroughs. I prefer to save them to a document and refer to them offline, if I need to. I actually tried it at 2 different sites (one that hosts their own images and one that does not), with the same results.
While I was waiting for a response (thank you, so much, by the way), I tried again and actually managed to get the first 3 images (of 60+) to paste into Word. There were blank places in Word, but the invisible images were clickable. In Pages, only the text pasted.
Tried it every which way, but Sunday, LOL, and nothing worked. If it can't be done on my Mac, then I'll just keep using my Dell (I knew there was a reason I decided to keep it) for that sort of thing and then email them to myself...or try installing my MS Office '07 under virtual Windows.
Thanks, again.

"Film Safe" and "Mark repeated frames" don't seem to work?

Hi guys!
I'm new to this forum and new to FCP Pro - though I'm not at all new to non-linear editing (Media100, Avid, etc.).
A friend of mine is editing a feature film on a brand new G5 (dual) using a newly installed Final Cut Studio. Everything is working just fine except the marking of repeated frames in the sequence. I did my best to find the answers in the pile of books that came with the s/w, then tried to consult with editors around here - to no effect, alas! FCP is not very popular in Bulgaria (it's really a shame!) and the other two film projects that make use of it also have similar problems.
Can any of you, guys, help?
The problem in more detail:
FCP Pro 5 does not mark "on the fly" the repeated frames in a sequence. To be more precise, sometimes it does and sometimes it doesn't - and in a single sequence. If that wasn't enough, I'm not able to make FCP mark those dreaded "couple of frames" needed for negative cutting (inless the corresponding dupes are produced, that is!).
I have really tried to solve the problem on my own using the books and consulting people and have done a lot of testing and trying, so please bear in mind:
- "Mark repeated frames" is checked in "Preferences"
- I am using one and the same project and sequence for these tests
- the computer is G5, dual processor, 1 month old
- the software is Final Cut Studio, latest version
- I'm a bit pressed for time, as the editing must be completed by the end of Jan.'06
I will greatly appreciate your help!
G5 Mac OS X (10.4.4)

GUYS, I NEED HELP !
ANYONE?

Bottom and righ of frame cut off in IE but not in Chrome?

Hello, this is just happing on my computer and I do not know how to fix. When I run one of my captvate projects in Internet explorere 9,10 or 11 the bottom and right side of the frame is cut off. I have the shell set to 1024x768 and I also set it to 800x600 and the same thing is happing. I ran the course in chrome using the HTML link in the folder and it ran fine. I have IE11 on my test computer and it is working there too. Any Ideas or updates that Microsoft may have done that I could be missing or need to change.
thanks,
Marty K.

Sounds like you just need to clear the cache in Chrome.

Repeating frame data run over the page number in the bottom of page

Hi all,
I have an issue trying to have page number info shown on every page of report.
The report has an outer frame M1 that includes frame M2 (it contains a repeating frame with actual data), M3 (a frame that shows the summary and total info) and M4 (the frame that contains page number information.
Settings are as follow:
Frame - Vertical - Horizontal - Print Obj On - Base Printing On
M1     Fixed          Fixed          First Page     Enclosing
M2     Expand          Fixed          First Page     Enclosing
M3     Fixed          Fixed          Last Page     Anchoring
M4     Fixed          Fixed           All Page     Enclosing
What happens now is that frames M3 and M4 both only shown on the last page. M3 has the right behavior but I expected M4 to show on every page. All these are on Main Section. I know I could have page info on Trailer section but I need to have everything on Main section because of some other logic I have.
Any suggestions?
Mike

I tried that but it did not work. If I used Print All Pages for main content frame it will just have 1 page output versus multiple pages as expected.
Two important points:
1) R1 (the repeating frame in M2) has Vertical Elasticity as Expand because it also contains more repeating frames under it. Problem could be solved if the R1 would have vertical elasticity as Fixed instead;
2) I also could have fixed this by having M2 (it contains a repeating frame with actual data) with Vertical Elasticity as Fixed instead of Expand. But once I do that, I get Report error M3 (frame that shows the summary at the last page) "has an illegal print condition"? Anyone know why this error occurs?

I have lost scroll bar on 1 website only since upgrade to version 19 and the words run off the page

Only 1 website affected. Scrollbar is missing and words run off page. If I minimize the screen, then maximize, the site returns to normal. If I leave the page, refresh the page or click on a topic to read (it's a sports message board) I lose the scrollbar again until I minimize-maximize. I have disabled all add-ons 1 at a time and all together. That doesn't help. Any suggestions? Other Firefox users are apparently not having this problem on the same website.

Are you running any add-ons that might change the appearance of the page, e.g., add-ons that block ads, Flash, scripts, etc.?
Sometimes you notice glitches in Firefox related to graphics card driver incompatibilities. To rule that out, you could disable hardware graphics acceleration. You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
After restarting Firefox, do you notice any difference?

Page Breaks in Repeating Frame's

In my report, my query is a 184 column table. Select query is also a 184 column table.
There are Repeating frames in my layout editor, each contains 10 columns. From the 2nd repeating frame onwards, the page break before property is "Yes". Now if, for the 1st repeating frame there is data (10 columns only) Then the rest of the page is blank. All the page break before property is "Yes" How do I avoid these blank pages

Hi,
the "page break" properties are only active in parent-child relationships. So if your frame1 is not expandable vertical, frame2 is no child object ob frame1 and so the property page break after of frame1 is not relevant for frame2. So change your layout, that frame2 is child of frame1 and frame3 is child of frame2, then the page break after will run as you expect. You can do this via the property vertical elasticity or via using an anchor between the frames.
Regards
Rainer

Headers at top AND bottom of a repeating frame.

I've created a simple report through the Oracle Reports wizard. It created column headings which are on at the top of each page, and the repeating frame which spans several pages. What I am now trying to add are column "headings" which are at the bottom of each page. Similar to the Headings that are defined above the repeating frame, but under the repeating frame.
Problem is, the repeating frame spans several pages, but the "Headings" at the bottom are only showing on the last page. I do have the preferences set to All Pages. I can get all sorts of things to work and print on each page ABOVE the repeating frame, but not on each page BELOW the repeating frame.
Something simple?

Header, Main and Trailer section are something completely different. They have nothing to do with header and trialer on a page, but are completely different sections of a report (like having an introduction letter in the header section, and the report in the main section).
If you want to do what you want, do this:
- In the layout editor, expand the group frame (GF) around the repeating frame to almost the height of the page.
- Set the vertical elasticity of GF to Fixed.
- Copy the header group frame and it's text fields to a position outside GF. Rename it to Footer group frame (FGF).
- Drag FGF and it's items to a position below GF.
Hope this is clear.

Text and/or repeating frames run off page ...

Similar Messages

Maybe you are looking for