Text below photo album too far down when viewing individual photos

In iweb, I've made pages of photos. I have text below the photo album. On this page: http://axleart.com/index/Thelma_Mathias.html#1 the text pops up right below the photo when I shift from thumbnail to individual photos. I like this. On other pages, such as: http://axleart.com/index/Matthew_Chase-Daniel.html the text remains way down at the bottom of a long blank page. I want to make it pop up like on the other. How to do this? I notice that on the good page, the text box is below a little line at the bottom of the album (so would be the "made on a mac" button. On the bad page, the text box is above this line. I suspect this might be the key, but I can't get it below. Any ideas?

On other pages, such as: http://axleart.com/index/Matthew_Chase-Daniel.html the text remains way down at the bottom of a long blank page. I want to make it pop up like on the other. How to do this? I notice that on the good page, the text box is below a little line at the bottom of the album (so would be the "made on a mac" button. On the bad page, the text box is above this line. I suspect this might be the key, but I can't get it below. Any ideas?
"To purchase, click here" text box of the problem page is in the page body_layer, you need to move it into footer_layer below the little line at the bottom of the album.
to do that select the text box, drag it down while hold down *command key* ; footer_layer will lite up when the text box is inside footer_layer .

Similar Messages

  • Sending mail to a bunch of recipients, got a message failure, but can't reach the connection doctor. It's too far down

    I was using Mail to send a message to about 200 recipients.
    Got a message
    "Cannot send message. Did not recognize the following
       recipients:
       xxxxxxx
       xxxxxxx"
    200 addresses down
    Cannot reach the Connection doctor button.
    It's too far down.
    How can I erase it?
    I still use Mail, but the message failure is still there.

    Try this settings on your Router, This will solve your problem.
    Open the set up page of the router by launching an Internet Explorer Browser and type the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field
    empty and provide password as admin and click on ok.
    On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    Click Clone & click save settings
    Check WAN Ip on Status page of router ....
    If getting Valid Ip .... try going online
    If not ... power cycle for 4-5 minutes & then again check the WAN Ip address ..... 

  • Some album artwork missing only when viewed in tile mode.

    Hello, after Restoring to new (to clear up an issue with excessive "other") and updating iPod 5 to iOS 7.1, which corrected issues, I have found an odd glitch with music. Four album covers are missing when viewed in tile mode only. You see them otherwise when viewed any other way, everything plays as it should, it's just there not there in tile view mode, what you do see is black background with white letters telling you the album title and artist name. Have tried powering down, soft reset, Reset All Settings. Going into get info and tapping get artwork. Erasing effected music and syncing albums back into iPod. Erasing entire music library and then reinstalling, and Restore from backup. The same four albums do not appear in tile mode. All effected albums were purchased through iTunes. As far as I know the only other thing to try is the Restore to new, is there something else to try? Thanks.

    Sorry Illaass, been there, done that. No joy! Used the suggested method to delete before posting this. (Picked it up from you when you helped someone else with a similar problem-- it worked for them, but not with this one). It's kinda looking like restoring to new? (Please tell me something else... It's such a pain.)

  • Texts in pdf form don't appear when viewing in Acrobat nor in Reader.

    Texts in pdf form don't appear when viewing in Acrobat nor in Reader nor when printed after the form has been filled. But the texts appear when one clicks inside the field. What is the solution to be able to print and view all of the texts in all of the fields that have been typed.

    More than likely caused by someone filling out the form with Mac Preview.
    Here's a potential fix: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

  • The "page down" key goes too far down - how can I adjust it?

    When I'm scrolling through an article or webpage and hit the "page down" key, the jump down is too far and I have to scroll back up a couple lines to see what it missed. Is there a way to adjust that?
    Thanks.

    Are you zooming the page or have adjusted default font sizes?
    It is possible that this affects the behavior of scrolling as this can be a fixed amount of pixels.
    Look at these prefs (see about:config) to set the scrolling behavior with the keyboard.
    *toolkit.scrollbox.horizontalScrollDistance (5)
    *toolkit.scrollbox.verticalScrollDistance (3)
    *Bug 635645 - consider increasing the amount of scrolling performed by using the arrow keys
    *Bug 725700 - Keyboard arrow keys and scrollbar buttons should have consistent scrolling distances
    <i>Please do not comment in bug reports<br>https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

  • Design right alignings and scales down when viewed on ipad

    Hi,
    I have a centered design web portfolio which works fine on all systems except Ipads. On an Ipad the home page right alighs and scales down when it should be centered. This only happenes on the home page, the other pages are cented and the correct size.
    http://steveharjula.com/index.html
    http://steveharjula.com/cat-house-identity.html
    Help is appreciated.

    On the web, less is defintely more.   
    First main image is 1,009.38 KB (1,033,604 bytes) in file size.
    Nobody wants to download a 1MB image if they don't need to.  Especially people on mobile devices who may be paying through the nose for bandwidth. 
    I would suggest limiting yourself to 6-9 thumbnail size images per page and optimizing them in PShop with Save for Web properties.   You'll need to sacrifice a bit on quality to keep file size to a minimum.  I like to keep thumbnails around 20KB and full size images under 100KB.
    You could then deploy a modal window viewer like Fancybox to display larger images on click/touch.
    http://fancybox.net/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

  • Printing starts too far down the page - officejet pro 8600

    Have an officejet pro 8600.
    Recently, when printing, two probelms occur...
    (1) the document being printed starts printing approx 1.5" to 2" futher down the page then it should. This results in the bottom portion of the document Not being printed.
    (2) there is a crease/fold approx 3" from the top of the paper.
    It appears that either the paper is being fed too soon or the actual printing is being delayed.
    We have cleaned all the rollers and check the star wheel - no damages
    Thanks for your help
    This question was solved.
    View Solution.

    Hello,
    I would suggest realigning the printer. 
    Setup Menu>Tools>Align Printer
    Let me know the outcome.

  • HP LaserJet P1102w prints 1/2 inch too far down on the page

    When I print with this printer using Word it starts printing about half an inch down on the page.
    I've tried resetting it to factory defaults but it still fails on me.
    Any help would be appreciated.
    This question was solved.
    View Solution.

    Thanks for letting me know by changing the "Scale Content for A4 or 8.5x11 inch paper size" option resolved the issue.
    {Happy Dance }
    Have a wonderful day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Bookmarks are too far down the screen

    I synced my Safari 1.x bookmarks to .Mac this morning and when I pull them up at work on IE, they are all there however there is a big space at the top and I need to scroll all of the way down to see them. This happens each time. Any ideas what is causing this?
    Thanks!
    Eric

    Double Tap the Screen with 3 Fingers...
    Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
    That should fix it...
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Movie too far down

    I'm working with a template my client bought. As far as I can
    see in the .fla, the movie should be at the top of the page but it
    appears way down on the page (but not in all browsers). The file is
    at
    http://www.orphancareintl.org.
    Thanks for any good advice!

    lordy lorks, the third button was working after all. I just hadnt put a stop at the destination scene which was only 1 frame long.

  • Why can't i scroll down when viewing info on itunes

    I currently trying to update my ipad with itunes, but when i try to update my calendars and emails  itunes won't allow me to scroll down the bottom options. Is there a way to scroll down???

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • PowerPoint Shuts Down When View Slide Show

    I am using Office 2004 and when I try to View Slide Show, the program shuts down. It just started doing this. Have had it 2-1/2 years. I used Disk Repair. I Removed Office and Reinstalled. And, it still is doing that. Any suggestions?

    Office I believe has a repair tool somewhere hidden in one of the folders.
    On another note, have you ever tried iWork's Keynote? You can do more stunning presentations and working with media is much easier than PowerPoint. Also, you can export to PowerPoint if you need to. But some advanced features PowerPoint won't be able to support.
    I've kicked my MS habit and no longer use Office, even though I have Office 2008. I'm all iWork now.
    Bryan

  • ICloud has added some albums more than once when viewed on my iPad.Is it possible to delete the unwanted extra copies.

    How do I erase unwanted albums from iCloud.On my iPad the same album has been added more than once yet on my mac with iCloud there are no issues.

    I assume you mean photo albums.  How were these albums added in the first place?  Where they created on your iPad?  Do they have the same name?

  • Does new Airport Extreme slow down when used with Airport Express?

    Maybe this is self-evident.
    If get the new Airport extreme and use an old airport express to extend it, will signal slow down to the old speed?
    Does the AE have a greater range? Perhaps I don't need the Express to extend.
    I live in NYC and there are so many signals in the air. It seems like having the additional airport helps keep me connected.
    Thanks.

    The airport express is g technology not n technology, so it will be at least as slow as your old network. Also, I'm not sure but I think the the range will be a bit longer than with the old g system, but does not have the full potential of an n system.
    I've set up my new system but none of my machines are n capable. I extended the system using my old expresses. The speed of the system is no greater than what it was before the n.
    I bought the system to upgrade my technology because everytime my Applecare runs out, I get a new computer which isn't too far down the road. I've purchased an Apple TV which will also work better with the n technology when I upgrade. It's either buy it now or buy it later. I'm also hoping that some third party like Belkin will develop a PCIX card to provide n technology to those of my computers that aren't currently n capable. I'm sure there is many like me out there.

  • Color shift in pdfs when viewing on ipad

    Hey all,
    Just wondering what I need to do to my PDF to ensure color are some what close to original when saving a PDF in Illustrator or InDesign. Yes i understand iPad would be using a different coor management to a desktop computer but surely there is a way to get the colors, brightness closer to original?
    I notice that when doing standard and high quality saves in PDF format, the saturation and brightness contrast changes quite a bit, but if I save the image as a jpg its a lot closer.
    I was just browsing a car site which seems to be exeriencing a very similar situation with one of their PDFs. When viewing in iPad have a look at how bad this looks (its way too dark) but when viewing on a desktop machine its fine.
    http://www.holden.com.au/Satellite?blobcol=urldata&blobkey=id&blobtable=MungoBlobs&blobwhe re=1236959563505&ssbinary=true&blobheader=application/pdf
    (If the link does not work go to the main domain, click on vehicles from menu, select captiva5 then click view brochure) to load PDF
    Is it just a matter of color proofing using a specific model and drawing back on blownout levels before outputting to PDF?
    Any help or insight would be great

    Probably you are starting with an cmyk document and the profile is being translated that way.
    Try converting the document to rgb then adjust your colors. Make sure you are using sRGB and not Adobe RGB 1998 or Color Match.
    That should be the way to go.

Maybe you are looking for

  • How to send a JMS message to a server ....

    Hi I want to know how to send a jms message to a Queue and that is in a different server... How to send A message using a application client to a Message queue That is in another Machine(Server is in another machine ) env.put(Context.INITIAL_CONTEXT_

  • Browser scrollbars

    Hi all, How do I enable scrollbars for my site to help people with small monitor / resolution sizes view my site? here is my site: www.marklawrencedesign.com I have seen a few things on the internet, but not concerning the way my site is set to alway

  • Frozen ipad mini

    frozen ipad mini

  • MIRO posted without capturing RG23 PART 2 entry

    Hi all,         In this scenario, goods receipt is posted and the RG23A Part 1 entry is captured in GR. Now i am posting MIRO without posting RG23A PART 2 entry. System allows to post MIRO without posting the RG23A Part 2 entry and doesn't issue any

  • Can't open e-mail attachment from Russia to UK

    Hello, I've been sent an e-mail attachment from Russia to the UK but when I click on 'downdload file' I get the message 'Cannot open file'. I'm using Windows 7 on a laptop. Would be grateful for any advice.