Text box in page setup for P6 V8 is not working

I tried to make my own footer & header for the layout of my report for the software P6 V8 but it is not functioning in the field of Text/Box only.
Even editing on this field is not working. I tried to reinstall the software, but nothing happen
What should I do?

Hi Athish,
The only thing i can think of in the link you pasted is it has https instead of just http (i'm assuming you did put the real servername in).
You could maybe try using the IP Address instead.
Failing that try creating your own domain for it and see if it works like that.
I haven't tried deploying it under a managed server nor do i let the P6 installer do any of the weblogic configuration so it could be something in the way it is deployed that is different than just creating a new weblogic domain with an AdminServer.
Is there anything showing in the log file? Either P6 or Weblogic (you may need to set the logging level to debug)
Regards
Alex

Similar Messages

Went through setup for DVD PRO still not working

So I have done what are the protocalls that are appropriate for DVD PRO and the problem now is that I cannot drag my compressor file into DVD PRO.
It just bounces back to Finder or where ever else I find it. I give up don't know what to do now I am stuck. Thanks for everyones help. Also I still get the
incompatible format pop up-I am totally against a wall-do not know what to do at all.

I captured from mini-dv tape so I used dv 48khz or dv ntsc for my setup codec. I used send to in FCP to compressor. I used best quality DVD 90 minutes in Compressor. I am working with NTSC. I imported my compressed project clicking on asset. When I did this I get a box that pops up and says incompatible format.
Problem is I have no idea how to get a compatible format or what they are talking about since I followed the
correct protocol or at least it seemed correct to me. I know it is something I am missing-I just do not have the
knowledge to trouble shoot this particular problem. So that is where it stands of this moment.

How to link text-boxes in Pages 5.2?

How do you link text-boxes in Pages 5.2?

Thank you for your help; it is appreciated. I suspected that, but am still disappointed. I am finding myself getting more and more disenchanted with Apple products in the past few years. I've been a faithful fan, user and promoter since the 1980s, but I am starting to seriously doubt their competency in the past few years with the Pages 5 version as well as what iOS7 continues to do to my iPhone (as my prime examples). Instead of enhancing my life and work, Apple is beginning to waste my time -- a lot of it! Perhaps it is time for a change.... I don't want to, but I am starting to look for other alternatives.

How do I remove text boxes from Pages

I have an awful time with Pages on my lap top. I am used to Appleworks 6.2 on my older desktop (PowerMac G4 / OS 10.4.11). If I specify a US letter page I get that in Appleworks, it is then 8.1/2" x 11", without running into pre-existing formats or other similar distractions. I can immediately type a neat business letter.
Not with Pages. On my MacBookAir, with Pages 4.3 and OS 10.8.4, I can type alright, but when I want to print what I typed, only a small part of what I typed shows up in in Print Preview of my typed page. After a bit of backtracking, I notice a blue-lined rectangle on my typed page containing the portion of my typing that appeared in that Print Preview. It is apparently a self-formed "text box", that was not a part of my blank template page and was not inserted by me while or just before I typed.
I did not find any way to delete the edges of that text box. The "delete" option under the pull down edit menu is blanked out. If I click on the "Text box " symbol in the menu bar it does not let me switch off the text box, but instead gives me another text box inside the first one! I suppose this is to allow user to print only a single keyboard stroke of the entire letter. The "Inspector" seems to have no options to set text boxes.
Pages "Help" Menu has nothing of how to delete a text box, or how to prevent it in the first place from screwing up what you have typed in such manner that it becomes unprintable.
Similarly a small rectangular box formed on both the top and the bottom of each page (which could be a space reserved for a header or footer), but again I do not use these on my business letters, and they appear self-formed by Pages, and I would like to know how to prevent them, or delete them.
In other words I like to get a blank page to start with, which will only set up and type what "I, THE USER" enter on my keyboard.
Can anybody tell me how to this with Pages?
(PS. I can do it with even with Thunderbird !)

1. Open a blank Word Processing template (they are listed in the Template Chooser sidebar), you have opened a Layout template that requires Textboxes for you to type into.
2. To select a Textbox hold down the command key and click on its edge or lassoo it, then hit delete.
3. If you don't want Headers or Footers, uncheck them in the Document Inspector
4. Download the Pages09_UserGUide.pdf from under the Help menu and familiarise yourself with Pages' basics. Also look around your Menus and Inspectors which are laid out logically from left to right from broad to details.
I suggest you click inside your textbox first go command a and copy the contents before you delete it and then paste that into a new Word Processing template.
Peter

Linking text boxes in Pages

I can no longer link text boxes in Mavericks. I have version 10.9.3 installed. It seems like this is a problem that should have/would have been addressed long ago. When I go to Format in Pages, the Add Link is in light grey and it will not let me add the link. Am I missing something....

You should be posting in the Pages for Mac community for better response.
The last Pages version that linked text boxes was Pages ’09 v4.3. Pages v5.2 does not have this capability, and only Apple knows when or if they will fix that glaring omission.
If you had the older mentioned Pages installed before (downgrading) to Pages v5+, it was moved into /Applications/iWork ’09, and remains a functional improvement over Pages v5+.

How to enter text into text box in Pages '09

When I manually select a text boxes in Pages, I can paste text into them. I can move from text box to text box using System Events to keystroke tabs but have not figured out how to get Applescript Editor to make the pastes. I am trying to use Applescript Editor to enter text into a pages document that is formatted for labels.

I have downloaded template U-0089-02_P.doc from Avery, 14 boxes displayed in two columns of seven rows.
Once you have clicked in the upper left box, the following script should enter text into every box, from left to right and top to bottom.
tell application "Pages"
activate
tell application "System Events"
keystroke "Box 1"
keystroke tab & tab -- to go to the next column
keystroke "Box 2"
keystroke tab -- to go to the next row
keystroke "Box 3"
keystroke tab & tab
-- and so on
end tell
end tell
The problem is that I don't know how to enter the upper left box from the AppleScript Editor.

I have pages setup for english but all templets are in spanish

Hello everyone
After trying to reset keyboard preferances and services I am not getting any solution.
I have pages setup for english but all templets are in spanish.
can anyone help to fix this problem?
Thanks
dsd

You mean this?
Sociis mauris in integer, a dolor netus non dui aliquet, sagittis felis sodales, dolor sociis mauris, vel eu libero cras. Interdum at. Eget habitasse elementum est, ipsum purus pede porttitor class, ut adipiscing, aliquet sed auctor, imperdiet arcu per diam dapibus libero duis. Enim eros in vel, volutpat nec pellentesque leo, temporibus scelerisque nec. Ac dolor ac adipiscing amet bibendum nullam, massa lacus molestie ut libero nec, diam et, pharetra sodales eget, feugiat ullamcorper id tempor eget id vitae. Mauris pretium eget aliquet, lectus tincidunt. Porttitor mollis imperdiet libero senectus pulvinar. Etiam molestie mauris ligula eget laoreet, vehicula eleifend. Repellat orci eget erat et, sem ***, ultricies sollicitudin amet eleifend dolor nullam erat, malesuada est leo ac. Varius natoque turpis elementum est.
A: It's Latin, not 'Spanish.'
B: What problem?
Click on this Placeholder text to select it (All of it will be selected on a single click).
Type.
On the first kaystroke, all of the placeholder text is deleted and the first typed character appears.
Carry on.
Images in the templates are media placeholders. Replace them with your images in a similar manner.
For more on placeholder text, see page 75 of the Pages '09 User Guide; for more on media placeholders, see page 137.
The guide may be downloaded via the Help menu in Pages '09.
Regards,
Barry

Text box in pages has blue tabs - how to undo these? and what is 'floating

how can i get the blue tabs to go away? what is floating text?
deb

You can use Shapes to write in but then you have to change the fill and line colour. The text boxes blue tabs doesn't show when printing and there are for letting text flow. you can have one box on pages 1 and connect it to a text box on page for and the text will flow over to the box on page 4 if there is enough text. Just like in the magazines, more folloews on page 4.

How do I turn off text box in pages?

how do I turn off text box in pages?

Thank you Peter and Jerry.
Screen shot above. I know it's not much, but there it is.
In actual fact I can make the text box bigger, but I just want to have the option of not having a text box.
It should be simple, and not actually need a screen shot: just simple instructions. It seems pretty fundamental to me. Does anyone know how to do this?
Best, Angela

How do i link text boxes between pages in indesign cs5

How do i linbk text boxes between pages in indesign cs5 please

It is indeed may be someone has moved the discussions,
Regarding your issue, Check this link:- http://helpx.adobe.com/indesign/using/threading-text.html
If you could explain what exactly you are trying to do we may help better.

Text box in Pages 5.5.2 won't select

I've tried to select a text box in Pages 5.5.2 and it won't let me select it.

Move your mouse pointer across your document near the Text box. Click at the point where it transitions from an i-beam (body text) to a northwest black pointer (Text box), and your Text box will select.

Connect two floating text boxes in Pages so the text continues

Hi,
I'd like to connect two floating text boxes in Pages 5.0 so text continues beetween them. I'm sure that in Pages '08 this function was implemented, is there some way to do this on the new version? Thanks!!

No, feature removed allong with over 90 others:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Pages '08 or Pages '09 should still be in your Applications/iWork folder.
Trash/archive Pages 5 and rate & review it in the App Store.
Peter

Data Merge, multiple records, one text box, one page

I need to my data to merge in one text box on multiple lines.
Example:
My TXT file:
Name
Mary
Bob
Paul
I want my InDesign file to look like this: (one text box, one page)
Mary
Bob
Paul
I don't want multiple pages or multiple text boxes. I hope this makes sense.
TIA

Sorry, that's not how it works in Data Merge.
Your list will require multiple records per page, or a restucturing of the data (a better choice, in this case) so you have Name1, Name2, Name3 or something similar.
Have you considered just placing the text file?
How many records are you really using?

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

As soon as I posted, Ifigured this one out on my own by going into user settings and changing the default there. Then I was able to delete the default @mac account. Thanks!

I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

To get the orange FF tab, go to View > Toolbars > Menu Bar. This should uncheck the menu bar and give you the orange button.
Panorama is a box made of 4 grey rectangles that should be on the far right, if it isn't after you enable the orange FF tab, right click on anywhere on a tool bar that doesn't have anything on it, and you should get a menu with a list of your tool bars that you can check and uncheck. go down to customize at the very bottom and it will open a window with all your buttons. Find the panorama/tab groups button and drag it onto the tool bar of your choice.
to pin a tab as an app, right click on it; it's an option in the right-click menu.

Text box in page setup for P6 V8 is not working

Similar Messages

Maybe you are looking for