Text box on a mask prints with a 'watermark'

I am using one of the template newsletters. It's the Family Newsletter template which says Johnson Family in the sample. I changed the text in the sky blue mast, provided with the template. On the computer, the appearance is fine, but when printed my mast text has this whitish rectangular halo (watermark?)around each word in the mast. Again, this only appears when printed, not when view on the computer. Any ideas? I have tried everything I can think of.

Check whether you have shadowing on either the text or on the text box which is transparent.
Peter

Similar Messages

Is there a proper way to config multi-line text boxes so they're compatible with all/most browsers?

I've got forms that use multi-line text-boxes and they work fine with IE and Chrome. A user just discovered that in Firefox the fields don't wrap (it basically appears to be a large field but acts like a single-line).
Is there a workaround/fix for this?

Is the input text just some dummy text line e.g. "aaaaaaaaaaaaa...." without any spaces? Try by adding lorem ipsum sample text i.e. actual words with spaces between. It should wrap.
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question.
Firefox 37.01 —Here's a screenshot of it not wrapping:
(each of the above are 2 long paragraphs that are not wrapping and showing as 2 single lines.)
And here's a screenshot of Text Box Properties (I've tried it with and without autocomplete and spell-check just for kicks).

Text in "Text Box Tool" won't print

I have Adobe 6 Professional and a Brother printer.
You can print text box comments and highlighted text using "Document and comments" option under the "Print what" drop-down in your printer dialogue window.

Thanks...
Flatten sounds like a great way to go. I looked all over, but didn't see a flatten action, can you point me in right direction? I think Photoshop and/or Illustrator have this, but was hoping to just stay in Acrobat, and not get too involved/complicated, if possible.
I stumbled upon a document that said flattening occurs if you save it to [a very old version of Acrobat, like 1.x] Didn't see any place to do this either... on the "Optimize" menu, mine only goes down to Readable by "4.0 and later". Welcome any suggestions.
Re: using "real text" instead of comments, I'd like to, but in some cases the pdf is received, instead of created. So, would like to be able to work with what got (a pdf at the start), then just add the text and embed/flatten/integrate/save or whatever, permanently so to speak, into the document.
Thanks again, and thank you for patience with these questions...

Help! Odd text box behaviour in IE compared with iWeb 08/Safari.

Hello All
I have been tasked with building my girlfriend a website so have fired up iWeb and got stuck in. It all looked fine and dandy to me in iWeb but she is complaining that when she views it on her PC using IE one text box is messed up. In iWeb I centered the text both horizontally and vertically within the text box but IE shows the text at the bottom of the text box and hence loses some of the text.
I'm wondering if there is a work around for this to make the site look the same in IE?
Thanks

Jonno,
Make sure nothing else is touching the textbox on the iWeb page. You can click on any element on the page to select it, then use <select all> (command A). This should allow you to see all the boundary boxes for all the elements on the page, make sure none of them are touching the problem text box.
Also make sure the textbox isn't touching the edge of the page or the header , or footer or anything. Make sure there is space all around the box.
If you post the address to the page others can more easily help you.
Sincerely, David

Text size is reduced when printing with a jpeg imbeded in the email

When running Thunderbird 31.3.0 and there is a large sized jpeg attached, the email will print showing the entire email but text gets scaled down so the jpeg image will fit. Is there a way to either have the picture cropped so it does not control the printing size of the text message or print without the jpeg being printed, thereby leaving the text not reduced in size?

Try the Aperture forum area.

Cannot print document with added barcode text boxes

G'day
I'm adding two text boxes to an illustrator document with Applescript, but when I go to print, ?I get an error 'Cannot print the illustration. The Color Management settings are inconsistent.'
The error message is not error trappable.
I have to barcode thousands of documents a year, and this is a big deal breaker. Is there any fix, please?
Regards
Brian Christmas
try
set printerName to my theLargePagePrinter as string
set paperOptions to {class:paper options, name:largePaperSize}
set jobOptions to {class:job options, designation:all layers} # , print options:printOptions}
set colorOptions to {class:color management options, profile kind:printer profile}
set flatOpts to {class:flattening options, clip complex regions:true, gradient resolution:360, rasterization resolution:360}
set printOptions to {class:print options, printer name:printerName, paper settings:paperOptions, flattener settings:flatOpts, job settings:jobOptions, color management settings:colorOptions}
try
set p to 17
tell application "System Events" to tell process "Adobe Illustrator"
click menu item "Fit to Artwork Bounds" of menu 1 of menu item "Artboards" of menu 1 of menu bar item "Object" of menu bar 1
end tell
end try
set p to 18
say 7
print document 1 options printOptions
say 8
on error errmsg number errnum
tell application "System Events" to display dialog "Error in printing illustrator document. " & errmsg & " number " & errnum giving up after 40
end try

G'day Owen, & W_J_T.
Unfortunately your suggestions did not work for me.
I've tried using the GUI to access the print dialog box, but as usual with Adobe, they've stuffed that up too. What I did find however, that the print dialog box recognised keystrokes, and always defaults to the Printer box when opening.
Also, the Printer box sets itself to a matching item of whatever key is pressed, and so does the Printer Preset box.
So, even tho I can't select any given box, provided I have a Printer Preset set, I can access it by the following (slower) method...
activate
tell application "System Events" to tell process "Adobe Illustrator"
keystroke "p" using command down
keystroke (character 1 of (my theLargePagePrinter as text)) as text
repeat 17 times
keystroke tab
tell current application to delay 0.1
end repeat
keystroke (character 1 of (my theLargePagePrinter as text)) as text
keystroke return
end tell
Note that if you have more than one printer or Printer Preset starting with the same letter, then you'll have to use more than just the first character of your printer name.
Regards
Brian Christmas

How to center Text Box on Web Page? -- Web dev with Word 2013

I'm trying to assist a user who wants to use Word 2013 for simple web page development.
There are many tools but they want to use Word 2013.
Actually have it working by saving the Word 2013 files as web pages... like index.htm, about.htm, etc.
The problem is when we use the "Insert" tab in Word to create a "Text Box" or a "Shape" ...
And align it centered on the page... it looks fine in Word but when we open it with a web browser the "Text Box" or "shape" are no longeer centered.
We thought we had it fixed by making the "Text Box" Layout Options "In Line with Text" but again... looks fine in Word but not in a web browser.
The question: How can we get a "Text Box" in Word 2013 to appear centered on a web page?
thanks for any help.

Hi:
For webpage design, I would suggest customized form under develop tab on the Ribbon over insert object directly. I tested from my side, using customized form will lock the object position on the
page.

Changing a PDF with a text box, and then flatten the text box onto the underlying PDF before sending the document out.

I download PDF documents from municipalities, often and from numerous municipalities.
They have a scanned image of a form that I need to fill out,
I enter my contact info as a text box onto the form, along with other information,
but when I save the document, there seems no way to flatten the fields so that the person I send the document to has a true PDF and cannot change the document.
They could delete one of the text boxes or change the text in the box (by mistake),
which could case some major complications.
How do I flatten the document, so I can send it back to the municipalities as a PDF that cannot be changed.
I am using Acrobat X Pro, on windows XP machine

I doubt you could fix this. Generally a "garbled" file is considered unusable for copying, and that's that. If a PDF uses random mappings instead of standard ones it looks fine on screen, but text extraction is impossible.
Short of converting every page to bitmap and OCRing again.

How to compare text box value with the table data??

Hello ALL,
I created one stored procedure in DB,it is as follows:-
CREATE or replace PROCEDURE chkUser
u in varchar2,
p in varchar2,
ap out varchar2
is
begin
select count(*) into ap from tbuser where loginid = u and password = p;
end;
And at the front end I have designed a form with 2 text boxes, now my question is I wanna compare these text box values(which user enters) with the data of the table....??? something like control (may be I am not sure)..... ???
If anybody can help me out with this issue...... help will be appreciated
Thank you.
regards,
Kumar

hi Elise,
I'm always getting the Error Message as "Invalid Creditianls"... let me tell you the whole scenario with sql synatx.
I have created tables as:-
CREATE TABLE "TBUSER"
(     "LOGINID" VARCHAR2(30) NOT NULL ENABLE,
     "PASSWORD" VARCHAR2(30),
     CONSTRAINT "TBUSER_PK" PRIMARY KEY ("LOGINID") ENABLE
than I created the Procedure on tbuser, it is as:-
create or replace PROCEDURE logincheck
u in varchar2,
p in varchar2,
ap out varchar2
is
begin
select count(*) into ap from tbuser where loginid = u and password = p;
end;
now at the front end side I have created one form with 2 text boxes (P8_USERNAME & P8_PASSWORD) and 2 buttons (Cancel and Submit)
as per you told me in the above post, I have created 'Validation' procedure with Type as 'Exists' and expression(into Validation Expression1)as:-
select 1 from tbuser
where loginid = :P8_USERNAME
and password = :P8_PASSWORD;
and
kept an error message as 'Invalid credentials'.....
but I don't know what's going wrong..... I do have few data into the table, and when I am entering the same data(with case sensitive) I am getting the Error message, rather than when the credentials are perfect user should be allowed to enter into the current page(where I have created this form and validation procedure)....
any idea what's going worng and where...????
thxs.... appreciated..
regards,
Kumar

Difficulty editing text in iPhoto book project. I add a page layout with text, but can't edit the text box., Difficulty editing text in iPhoto book project. I add a page layout with text, but can't edit the text box.

I'm am having difficulty editing text in the iphoto book project. I have a text box that is pre-populated with text. I can edit the text once, then if I need to change something, it won't let me delete anything, only add to it. Anyone else having this problem?
Thanks!

You should be able to double click in the text box and add or delete text. First make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that doesn't help launch iPhoto with the Option key held down and create a new, test library. Import some photos, create a book and check to see if the same problem persists. Post back with the results.
OT

HP Laserjet 6MP fails to print with parallel-to-USB converter cable

I have a LaserJet 6 MP parallel printer which I was using in 10.3.9 with a parallel-to-USB converter cable. The Printer Utility saw it natively as a USB device and it printed just fine most of the time, although it would occasionally fail to print, so I installed a different driver called usbtb 1.0.15, and after that it printed very reliably.
Now I've upgraded to 10.4.9, and the Printer Utility still detects the HP printer natively as a USB device, and I also installed the formerly-reliable usbtb driver again, but the printer now fails to print with either driver. It acts like it's going to, but then it quits.
When I choose Print, all the features of the printer are shown, and I can select which tray to take paper from etc., and the printer dialogue box says "Printing," the activity light on the printer flashes just as it always does when printing is in progress, but then, instead of printing, the activity light stops flashing and the print job disappears from the dialogue box.
Can anyone tell my why this printer is failing to print now, and how I might be able to get it working again?
Thanks,
Tom

Wait a minute! It's only certain Indesign documents that won't print.
All TextEdit docs will print.
I created a few scribbles in Photoshop and they print.
But with InDesign, there is no predicting which documents will print or will not print. On some that will not print, if I remove all but one text box, then they will print. On other documents that do print, if I copy some text off of one that won't print and paste it in, then that one stops printing too.
On some that won't print, if I erase everything on the page and create a new text box and type a few words into it, the page will print. If I revert to the previously saved version, once again the page won't print.
What kind of craziness is this, anyway? It seems random. I can't figure it out.
Even on the documents that won't print, when I try to print them the printer's activity light blinks as though it is just about to print, but then the light goes out without printing.
Anybody got any ideas what this problem is and how to fix it?
All I know is that EVERYTHING printed before I upgraded from 10.3.9 to 10.4.9.
Tom

Text Box Inset Guides

InDesign CS4 does't seem to show Text Box Inset margins as guides when text box is selected just once with Selection Tool (i.e not dble-clicked to edit text). The Inset values can be discerned through opening up Text Frame Options dialogue box, but within CS2 they would be viewable as guides (which helped with exact alignment) when Text Box was selected once. Note: when Text Box is dragged to new position they appear momentarily whilst being dragged - not much use! Any help much appreciated.

Ok
I made a text frame there. I put insets of 5mm in there.
I can see the insets. But when i go to the type tool the inset preview disappears.
I ctrl click to move the frame and they temporarily appear. But once the type tool is active in the frame the inset preview is gone.
CS3.
Bug?

How can i type text in one text box and have the same text appear in a second text box? (on the same page)

I'm trying to make a simple CD label template and would like the text typed into the title text field on the cover to also appear in the title box on the back cover when typed just the once.
Is there any way to accomplish this?
Thanks.
chuck b.

Hi Chuck,
Not possible with a Text box, but can be done with a table.
Type the text in cell A1 (top left). When you exit the cell, the text will appear in C1 (top right).
Table can have fewer cells; cell borders may be set to 'none' to make them invisible; font and size may be different is each cell (as shown).
The formula in C1 is pretty simple: =A1
So it's possible, but on the whole, I agree with Peter—Copy/Paste is just as efficient, Drag and Drop onto (styled) placeholder text works quite nicely.
Regards,
Barry

Acrobat 9.2.0 Update Breaks Text Box Tool, Possibly Introduces a New Security Flaw.

Anyone have any ideas for this one?
Once we upgraded to version 9.2.0 (This is a major security release that fixes a Javascript security flaw) our text box tool no longer works the way we want it and crashes the program.
Try this:
1. Open any PDF document on a Windows XP SP3 computer with Adobe Acrobat 9.2.0.
2. Add the 'Text Box Tool' to the toolbar by right-clicking the toolbar and selecting 'MoreTools' then placing a checkbox next to the 'Text Box Tool'.
3. Click the 'Text Box Tool' on the toolbar and draw a new textbox anywhere on the PDF document.
4. Click out of the textbox to cancel typing mode, then single click back on the textbox that you just created.
5. Right-click the textbox that you created and select 'Properties..."
6. Under the 'Appearance' tab,
a. Select Style: No Border
b. Select Fill Color: No Color
c. Check the box 'Make Properties Default'
d. Click OK.
7. Click the Text Box Tool again, and draw another textbox (Since there is no border you will not see it but you will still be drawing a textbox).
8. Let go of the mouse when you are done drawing your textbox rectangle and the program will crash at this point.
Results:
1. "An internal error occurred." dialog box is displayed.
2. After clicking ok the following "Microsoft Visual C++ Runtime Library" dialog box is displayed:
"Runtime Error!
Program: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
R6025
- pure virtual function call
3. After clicking ok another dialog box is displayed:
Error signature
AppName: acrobat.exe AppVer: 9.2.0.124 ModName: acrobat.dll Offset: 000509dd
4. The same error has occurred on all five computers that we tested the new version on.
Expected results: A new textbox is created and you may start typing in text (This was the behavior in version 9.1.3).
Additional Information
At times, we need to add information to PDF files (i.e missing dates, etc). We have always used the Text Box Tool to do this with no border, and with no fill color as this is the EASIEST and FASTEST way to add information to PDF files in a precise manner. We want the fill color to be transparent so that we can fit text in between and exactly on lines easier, and so that there is not a solid background box behind the text. We want no border because a border around text that needs to go on a line looks stupid. Up until version 9.2 this procedure worked fine. Now, the program will crash. Perhaps this even adds another security vulnerability if the crash could be exploited. We want to maintain security by patching Adobe to address the JavaScript vulnerability that was addressed in version 9.2.0, however, we are not able to update our users as the new version breaks the fundamental purpose that we use Adobe Acrobat for. We are stuck with the vulnerable version 9.1.3 until this problem is addressed. Disabling JavaScript is not an option either, as we use a Java plug-in on a daily basis.
Any thoughts would be great, I have attached screenshots of the errors.

The question still is not answered.
The problem continues in Acrobat 8.1.7 for Windows, even after updating toAcrobat 8.2.0. ( I can't comment on whether recent updates to Acrobat 9 fix the problem in Acrobat 9.)
The internal error after text insertion problem occurs even with PDF documents created in Acrobat 8, i.e., not only old versions of PDF files. We have the text box insertion icon in the toolbar, and the properties set to "no color" for the box and "0" width for the text box lines, as other commentators have noted.
The problem did not exist when Acrobat 8 Pro was installed, it was introduced by one of the updaters.
The main reason we use Acrobat, rather than much cheaper PDF-creation software, is to annotate PDF files (including inputting data into spaces in standard forms).
So justify the high price of Acrobat and fix the problem please, Adobe !

How can I made a text box to accept initials or signature without signature field?

I create forms for my clients using Adobe Pro 9. Due to the potential lack of computer literacy of their customers, my clients would like to make a field that would accept an initial or a signature without the steps needed for a digital signature.
The steps would be 1) customer opens form with Acrobat Reader; 2) click on Fill & Sign Tools, then create the initials to use; 3) drag the initials to the textbox. At this point the size of the initials would correspond with the size of the text box.
I have experimented with having the text box property Appearance-Text-Font size: Auto. However when I opened the PDF in reader, I would have to resize the signature block.

Hi bluecraby2k,
If I understand your question, you don't want to use the Signature form field, because your client feels that might be too complicated for some users. Is that correct?
The Place Signature option on the Fill & Sign tab allows you to drag a signature onto the page, but not directly into a text form field. I don't believe there's a one-to-one relationship between the form field and the Place Signature option.
I'm going to move this discussion to the Forms forum, so the experts who visit that forum can chime in.
Best,
Sara

Text box on a mask prints with a 'watermark'

Similar Messages

Maybe you are looking for