Text Bug?

I cant seem to find an answer to this, so maybe someone here could through some light on it.
A bogstandard text box, and some simple text
"All profiles will contain..."
But when i type dot dot dot they move to the front, so it becomes "...All"
And i cant find anywhere a setting to toggle or set.
It does seen a bit odd that the default, out of the box, behaviour is non standard. I'll have a word with Adobe about that. I guess some technition forgot to set it back.
So where is the contol, and what would it be called?

WebOfWebs wrote:
…So now when i roll out Adobe products, this is yet another irritation i have to correct.
Oh, come on, WebOfWebs…
I've seen a good number of Photoshop 13 installs in the last couple of weeks and not a single one of them was set to right to left by default.
It is far more likely that you accidentally and inadvertently hit a key combination. From the Help files in Photoshop:
To use bidirectional keyboard shortcuts:
To change the text direction of a paragraph to right-to-left, press Command-Control-Left Arrow.
To change the text direction of a paragraph to left-to-right, press Command-Control-Right Arrow.
To change the text direction of a paragraph to the default direction, press Command-Control-Down Arrow.
To change the text direction of selected text to right-to-left, select the text, and then press Command-Control-Option-Left Arrow.
To change the text direction of selected text to left-to-right, select the text, and then press Command-Control-Option-Right Arrow.
To change the text direction of selected text to the default direction, select the text, and then press Command-Control-Option-Down Arrow.
To type the Arabic date in the order it’s displayed, using slashes, press Control-Slash to enter each slash.

Similar Messages

Photoshop adds a stroke to my text -- bug?

Good afternoon!
I have several Photoshop CS3 files that are exhibiting a strange problem. This symptop ONLY happens when I create a new text layer in one of these files.
I create a new text layer and type some text. Then when I select part of the text and set it to a differnet color (so there are two separate colors being used in the same text layer), the text takes on a dark outline/stroke around it. No layer/blending options show that the text should be stroked. As soon as I change the text back to all one color, the stroke goes away.
I've attached a screenshot of the affected text.
What could be causing this? I've searched for a known PS CS3 bug but can't find one. If I create a new file, this symptom does not appear. But the affected file(s) behave exactly the same problematic way on any workstation they're opened on.
Thanks in advance for any ideas.
--Rob

No, no Layer Style.
I've found that if I choose "Reset Character" in the character palette, the stroke goes away and the layer (and newly created layers) behaves normally after that. But changing the settings in the character palette manually have no effect on the stroke.. Are there settings that are changed by "reset character" that aren't visible on that palette?
---Rob
Rob LaRose systems administrator
imaginary forces | 530 west 25th st | new york city | p 646.486.6868 | f 646.486.4700 | www.imaginaryforces.com
From: charles badland <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 6 Dec 2010 18:21:58 -0500
To: Rob LaRose <[email protected]<mailto:[email protected]>>
Subject: Photoshop adds a stroke to my text -- bug?
Is there a Layer Style indicated in the Text layer?

Fp11 text bug | mask bug

1. FP11 and fp10.3.183.5 text bug:
2. fp11 fla have one mask will lead to dynamic text can not be show.

I've worked out how to fix it, I posted 2 bug reports by accident:
https://bugbase.adobe.com/index.cfm?event=bug&id=2951270
https://bugbase.adobe.com/index.cfm?event=bug&id=2951267
Title
How to fix the vertical text bug.
Description
Problem Description:
Many of my textfields display vertically. In other words, 1 char per line.
Steps to Reproduce:
Possibly by using Flash CS3 to create textfields.
I think the bug began in the lastest FlashPlayer update.
Actual Result:
Text displays 1 char per line with many textfields
Expected Result:
It should display properly
Any Workarounds:
The cause for this is a hidden property in textfields called "left"
Please see the attached file DomDocument.xml.
If you look at the first 3 textboxes in the xml, they have very large x values and very large "left" values to counteract the x value.
If you remove the "left" property then it will work properly, as shown in the 4th textfield
Download DomDocument XML: https://bugbase.adobe.com/index.cfm?event=file.view&id=2951267&seqNum=1&name=DOMDocument%2 Exml

Lists doesn't work with synchronized text - bug or limitation?

Whenever I put a text to a collection to synchronize it, the list feature is no longer available for this text. Is it a bug or a limitation? It may be a tricky task to bring this two features together, but it is a substantial one.

Currently limited to the same formatting for the entire text frame and no internal structure (no lists or inline graphics). Request noted.

GDB Startup Text - Bug?

Every time I run my project, I get something like the following output in the Debugger Console:
\[Session started at 2010-07-29 00:06:57 -0700.]
GNU gdb 6.3.50-20050815 (Apple version gdb-1469) (Wed May 5 04:36:56 UTC 2010)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "x86_64-apple-darwin".tty /dev/ttys011
Loading program into debugger…
Program loaded.
run
\[Switching to process 17278]
Hello World.
Running…
Debugger stopped.
Program exited with status value:0.
I did a bunch of digging to see why this was the case, and it seems that this is not normal behavior. So I tried to check if for some reason Xcode was running GDB without the -q (quiet) flag. I wrote a short shell script and substituted it for the copy of gdb which Xcode uses (/Developer/usr/libexec/gdb/gdb-i386-apple-darwin) and found that Xcode is executing gdb with the following arguments: "--arch x86_64 --interp=mi1 -q"
So.. it should indeed be running in quiet mode, yet I get that long block of copyright text EVERY time I run my code. What am I missing?
EDIT: Interesting.. I just modified my script to strip the -q off, and then when executed I got all of the gdb copyright crap twice. Is this just built into Xcode?
EDIT2: So I guess this is just a part of life when you're using Xcode? It seems very unnecessary and obtrusive. Is there a way to disable that text?

lococobra wrote:
EDIT2: So I guess this is just a part of life when you're using Xcode? It seems very unnecessary and obtrusive. Is there a way to disable that text?
Not that I know of. I suggest you file a bug report with Apple if it bugs you that much. Maybe check it in Xcode4 first.

Flash 8 display 'jumping text' Bug after Blur filter

I think I found a display bug/glitch with blur effect in
Flash 8.
(I'm using the MC TWEEN actionscript method.)
I need to apply a blur filter to a Movieclip with dynamic
text.
When scrolling this Movieclip the text 'jumps' about causing
visual glitch
and a slow down...
I have tweened the blur filter back to 0 and I have also set
Movieclip.filters=[];
Has anyone else experienced this problem? Is there a fix?
Thanks,
David

mtaylor wrote:
> I see what's happening. It appears to be a width issue.
The underlines had
> been set to "hairline" but when they converted over to
Flash 8, the width value
> disappeared. Once I manually re-added the width value,
everything worked.
> Strange.
If this problem is reproducible, than submit to a bug list at
www.adobe.com/go/wish
Perhaps could be eliminated in future release.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Formatting text - bugs?

Hi
Whilst I'm here I thought I had better get this off my chest
too.
I've been editing some text recently, adding bold to certain
words, etc. Now when I go back into any text box the formatting
disappears from the text within it. On one occassion I underlined
some text in one box, went to another slide to edit some text and
when I opened it all the text suddenly appeared underlined. Any
ideas? This isnt a show stopper but it is wasting some time.
Help appreciated.

Welcome to our community, ntompkins
What you are seeing is a bug that was introduced with the
recent update of Captivate. Adobe is supposedly working on an
"update to fix the update". But we haven't heard anything from them
yet. Hopefully it will come soon, as this bug is driving me nuts
too!
Cheers... Rick

Belle agenda: afterglow of text bug

C6-01 Belle (Dutch), weird problem: when I want to add an appointment in the calendar/agenda, I get an "afterglow" of the text I did put in. Because of this it's almost impossible to see what I did type.
For example the attached image: I did put in some text and then removed it completely with backspace. The input part should be completely clean and empty yet there is an "afterglow" of what I did type before? When I start to type again, it's impossible to see what's been typed.
Typing text with for SMS, adding contacts and so on is just fine. It's only with with adding appointments. So it's not a bad screen issue.
This really needs to be fixed asap IMHO
Attachments:
after_image.jpg ‏323 KB

Bump.
It's a real issue cause I can not see what I type anymore. Anyone know something about it or how to report a bug about Belle? Not through Dutch Nokia Care cause I tried that twice now for other issues and only got what looked like totally useless auto responses with so called "solutions".

Weird auto bold text bug

I am having a bizarre issue with either indesign or reader. I'm working on a catalog, and I have it set up exactly the way I want in indesign. When I transfer it into a pdf it still looks correct, however when I print from the pdf it bolds part of the text that shouldn't be bold, in a font that doesn't have bold options. The weirder even, on some pages it bolds the bottom half of a line of text and not the top half.
This issue only started today, and it seems ok when I print direct from indesign.
I've also tested it on 3 different printers with the same results.
Any ideas what may be the issue?

You are right.... I was freaking out here thinking I may need to redo large portions. Thank you so much.
Any idea what causes this? Seems like either a design flaw or a bug, as a 100% transparent layer shouldn't change the look of things behind it. It's especially weird that it's making text more bald instead of obstructing it.

Warning: beware of text bug

cnn has reported that there is a bug on many android devices. google has acknowledged this and is working on a fix. some android users are sending texts and pixts that are NOT going to the intended recipient. i have not noticed if it is with particular devices, but it sound like an android OS issue...not a particular device. so watch what you text and who you text it to.

Good advice, in my readings of this bug, I have seen some rather embarrassing stories. Last I heard, Google has moved this higher up on their priority list.

Wrap-Text bug when publishing - When will it be fixed?

The bug that causes the text to not wrap in short answer and survey quiz questions when published to Adobe Connect has been around for at least 2 years. This is extremely inconvenient. I need to add a published Presenter quiz to our Adobe Connect Training Curriculum that includes a non-graded survey question, but we cannot because the wrap-text feature doesn't work. Since it doesn't work, the learner can only type in an endless straight line, which is extremely frustrating to the learner because they cannot easily go back and review their answer or make edits before hitting submit. They can't even put in a paragraph return. The wrap-text will only work if I share the quiz within a Meeting Room, but then we cannot track the individual answers learners provide. I added the Meeting Room, with the quiz being shared, into the Curriculum content, and sometimes the content list will then show the quiz as a sub-item under the Meeting Room, but sometimes it doesn't, and if you make any change to the item being shared, it sometimes suddenly removes the quiz as a sub-item in the content list. Plus, learners will be confused when they see the content list as to whether click to enter the meeting room and take the quiz or to click directly on the link to the quiz that is listed as a sub-item. And whichever one they choose, when they return to the curriculum list, they will only have a green complete check on one of the items, not both, even though they both go to the same place. When will this bug be fixed? Or has it been overlooked?

Well, I can't see any problem with the feed, and the episode media file is correctly referenced and plays. Incidentally you do have a 'copyright' tag - it says 'Wippenberg'.
When a podcast feed is rejected, corrected and resubmitted there is a minor bug in the Store which causes you to be told that the podcast has already been submitted (which is true but irrelevant - it's really meant to prevent duplicates). To get round this you need to make a small change to the title - for example you could add a hyphen and space before 'Podcast'. You can always change it back once it's been accepted.
The other issue might be the content. The reason given for rejection tends to be technical issues, whatever the actual reason is. I haven't listened to your podcast, so I can't comment directly. Possible reasons for rejection are unacceptable content, sexual content or strong language when the 'explicit' tag is not said to 'yes', and copyright infringement: a lot of people fall over this one by including 'mixes' or indeed full plays of commercially issued recordings without having written permission from the copyright owners or alternatively a valid Podcast Licence (not available in all countries, possibly only the USA). I have no idea whether this might be an issue with yours.

ITunes 8 Japanese Text Bug

Just downloaded ITunes 8, and I discovered that when I'm modifying the name of my playlists or music the "quick" way (double clicking and then modifying the text), the text that was in Japanese characters suddenly appears as boxes (like if ITunes didn't support Japanese text). When I'm not modifying it anymore it's fine.
?.?

i have this same problem. never happened until i updated to itunes 8. this does not only pertain to japanese language alone, but to all asian fonts (and i'm assuming some other foreign fonts like arabic as well).
no problem displaying the japanese characters on the song info that's already on the songs in the first place, and no problem modifying japanese text through the "get info" palette. but like you said, when trying to modify song info through double-clicking and then edit, all the japanese characters become squares symbols.
this also means there's no way to edit playlist titles with japanese font?

Highlight and replace text bug?

When selecting a single character, e.g. to change lower case to upper, why does it insert the character instead of replacing it, leaving the original item unchanged? This causes this office a lot of problems when it isn't caught and it happens quite easily. I've looked through the menus and preferences and sure not seeing any setting to override this odd behavior. [and yes I did search the forum for this problem and didn't find anything].
Expected behavior: highlight text, type new character, new character replaces selected character "don't try this at home"
Observed Behavior: Highlight text, type new character, new character is inserted after selected text, selected text remains. "dDon't try this at home"
Pages 5.5.2
OSX 10.10.1

I am using Yosemite 10.10.1 and Pages v5.5.2. I do not have a problem selecting any character, and then typing the replacement character in its place — without any insertion taking place. If clicking and dragging to select a character requires too much dexterity, then click behind the character to be replaced, and then press shift+ left-arrow. This will select the text before the insertion point. You can also click before the character to be replaced, and then press shift+ right-arrow, and that will select the next character.
These keyboard shortcuts are discussed in Pages Help, a menu item from the Help menu.

CFBundleSource instead of header text - bug

I've noticed that when my network settings are hosed after its been sitting for a day without use, the title is showing CFBundleSource instead of Podcast or Movies or whatever level I'm at.
Definitely something getting hosed up while it sits there. This problem is resolved when I hard pull the plug and reset it. Of course I have to re-enter my wi-fi password, which ****** me off to no end.
Needs some bug fixes Apple, bring on software version 1.1 please!

by the way, that is not a bad word, but the filter filtered it. I guess 'irks' would have been a better choice.

Small Picture Book Cover Text Bug?

I've just ordered 2 * 3 small picture books. On making a PDF copy to email, I noticed that the cover text was bleeding into the photo above it. That is to say it's about 2 cm higher than it should be and is escaping the black background it should be resting on.
I was using a French word with accents so I thought it might be the cause. Retyped a new title in English: same thing. Changing the theme to Medium Sized Picture Book resolves the issue. But if I change it back to Small, the glitch reappears. I've made a new Small Picture Book from different photos and the problem persists.
I've even managed to locate the pdf created when ordering and can confirm that it is wrong too.
So. Anyone else been through this? Unless a miracle occurs it looks like I'll have to go through the hassle of sending back two orders and waiting until they fix it...

Welcome to the Apple Discussions. The small books only have an introduction page for text but it can be inserted anywhere in the book. It's listed under the Layouts menu at the bottom.
OT

Text Bug?

Similar Messages

Maybe you are looking for