Text Caption Doesn't Show in Edit

Has anyone else had this issue, it has happened a few times
for us: A Text Caption can not be seen, accessed or updated on the
Edit Screen .. But, it is visible on the Thumb Nail, Timeline, and
Storyboard. When a Preview is run, it also shows up as it should.
However, if you run it from the Timeline is doesn't show up.
At first I thought it was a layering issue, but bringing the
text to front doesn't solve it. Any ideas? Thanks!!!!

Welcome to our community, Jane
If you look at your Timeline, does it maybe look like what
you see in the linked image?
Click here to view
the image
Cheers... Rick

Similar Messages

  • Personas web-link does not work. it just shows texts and doesn't show up correctly. It used to work but after I had my computer reformatted, and reinstalled fire fox, the personas site just shows text and I can't view the personas.

    When i go to http://www.getpersonas.com/en-US/ it just shows up as text and the graphics and details don't show up. It used to show up, but then I had to have my computer reformatted from the beginning and after I installed fire fox, this site doesn't work properly. wy?

    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    * http://kb.mozillazine.org/Websites_look_wrong

  • I-beam (text) cursor doesn't show on white backgrounds

    The I-beam cursor (for text editing) doesn't invert on white backgrounds, which are common in all apps. Hence, it is invisible. This occurs in the following apps:
    *MS Office 2004 (Word)*
    FINDER (when you edit the name of a file or folder)
    iTunes 7 (in any field you edit)
    Runtime Révolution 2.9 (an IDE dev app)
    *Adobe Illustrator CS3 (using the Text Tool)*
    *Quark XPress (using the Text Tool) Version 6.51 up to 8.1*
    BBEdid (v 8.x)
    Google Earth
    Toast 8
    Vuescan
    Firefox (2.0.0.13)
    The problem occured already under 10.5 Leopard, and is still a nuisance (read: not fixed) under 10.6 Snow Leopard
    Anybody have a solution of how to let this cursor invert again as should be? Or hack some system file to make is permanently black?

    i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
    would like to have your thoughts though.
    $headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n  format=flowed Content-Transfer-Encoding: quoted-printable";

  • Elements 10 trial doesn't show guided edit and other menus

    I've just downloaded and installed the Photoshop Elements 10 trial for the second time.
    I shut down my firewall and internet security while installing.
    The program loads fine but when I click on Guided edit, the panel on the right is blank.
    This is the same for Quick edit.
    The help files also won't load.
    I'm running a Windows 7 on a 64 bit machine.
    Please help!

    Try clicking the re-set panels button on the top menu bar and see if that makes any difference. Have you tried with an image open. Certainly the Quick edit module remains grayed out usually until you have a photo in the main window.
    If that does not fix it you may need to rebuild the editor preferences to resolve any conflicts.
    Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it.
    You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
    Click on Yes
    Close down Elements and re-open it in the normal way - then wait whilst it rebuilds the preferences.

  • Bug: text editor doesn't show scrollbars on very long lines

    i'm sending a test json message to a class, which means that i have a super long line of content (easily 15k chars). for whatever reason, the horizontal scrollbar won't fire, which means that it gets clipped to the window with no way to move right. even moving the cursor with the keyboard won't advance it. looks like i broke something

    Ballistic,
    Can you please file a bug at http://bugs.adobe.com/flex/ and include your project or a simple test case showing the issue.
    Thanks,
    Peter

  • If text still doesn't show up after you tried the "solutions" posted

    in the Safari for Win Beta,
    then please answe ths posting.
    I tried really EVERYTHING posted as circumventing the problem and a lot more but nothing helped.
    I certainly lost more than 10 hours installing, changing, uninstalling, etc. for NOTHING.
    I want now to make visible for Apple Deveopment and Executives what a horrible Beta they went with into the international markets.
    Thanks
    Robert Soran
    Former SVP Research
    Giga Information Group
    and
    Forester Research
    Acer TM 8204 WLMI   Windows XP Pro  

    Have you tried restarting without the projector plugged in?
    Clinton

  • Advanced actions - trying to show a text caption

    I have a slide with 5 text captions made from smart shapes, and 5 click boxes. All 5 smart shapes are hidden. I have 5 variables, all of which are set to zero. When a click box is clicked on, the corresponding smart shape shows and the value of the first user variable is set to one. When another click box is clicked on the corresponding smart shape shows and the next user variable is set to 1. Each of the click boxes is set up in a similar fashion. I set up 5 advanced actions, and the On Success action for each of the click boxes uses one of 5 advanced actions. The action for each click box looks something like this (I'm using generic names for this example):
    IF variable1 is equal to 0
    ACTIONS
    Show textCaption1
    Assign variable1 with 1
    Play Audio sound.wav
    Continue
    This is working fine, and the corresponding smart shapes are showing as they should when each of the click boxes is clicked on.
    But I have an additional feedback text caption that I want to show after all 5 smart shapes are showing. I tried setting up an advanced action that looks like this:
    IF
    variable1 is equal to 1 AND
    variable2 is equal to 1 AND
    variable3 is equal to 1 AND
    variable4 is equal to 1 AND
    variable5 is equal to 1
    ACTIONS
    Show feedbackTextCaption
    But even after all of the click boxes have been clicked (which should set each of the 5 variables to 1), the feedback text caption does not show.
    Can anyone help with a suggestion?

    @Sreekanth, that is not the correct approach, because a user could click 5 times on the same click box and see the final text caption. Only when you disable an already clicked interactive object this can be used. Jay was right by choosing five different variables.
    @Jay How do you trigger that last conditional action? Which event do you use? You explain that the first described action is triggered by the click box, but not what is triggering the conditional action.
    I suspect you'll have to combine both actions, and assign them to each click box. That means a conditional action with two decisions:
    First decision 'Always' needs the condition 'IF 1 is equal to 1' to create a mimicked standard action, and has to show the text caption, to assign 1 to the variable and to play the audio. I don't know why you added 'Continue'? If the click boxes pause all at the same moment, don't add Continue, let the playhead remain at the same location.
    Second decision 'Checker' is the conditional action that you wrote, checking the values of the 5 variables, and if they have all the value 1 to show the feedback text.

  • Text doesn't show up after exporting

    When I export my file, the text that I put in the file with the text tool doesn't show up. Everything else is fine though. Someone please halp!

    If you are using dynamic textfields then it is likely you need to embed the fonts/characters for them.  This is most likely the case if you happen to be masking, animating, or otherwise manipulating them.  To embed the fonts/characters you select the textfield on the stage and in the Properties panel you click the button labeled "Embed..." and then select the character sets you need to embed.
    Another cause could be that the textfields are assigned the same font voor as the background such that they do not seem to appear, but if you see the text before you publish the file then this is less likrly to be tyhe case.

  • Text caption changes font/colour/size

    Hi
    The Recording Defaults for the Text Caption in the prferences has not been altered.
    On some slides I need to add a text caption.
    I'm finding that sometimes when I click to add a Text Caption the font, colour and size is different to what the default settings are. The default is Arial, 12, #0000FF.
    When I manually add a text caption it'll show as System, 10 and black.
    Has anyone come across this before?  Is there a way to stop it.  It's really annoying and a time waster to have to manually change the font, size and colour.  And you have to be on your guard.  It's not every time I manually add a text caption, just sometimes.  It's intermittent.
    Thanks
    Anita

    Hi there
    The name will vary from version to version.
    Captivate_v10.dat
    Captivate_v20.dat
    Captivate_v30.dat
    Captivate_v40.dat
    The location also varies. For me, it is:
    D:\Documents and Settings\Rick\Application Data\Adobe\Adobe Captivate
    As you can see, D is my drive letter. Yours will likely be C. My name is Rick and is how I log in. Yours will be different. Also, the "Application Data" folder is likely to be hidden from your view unless you adjust Windows to show it to you. And all of this is likely in a different location if you are using Vista or Windows 7. I'm using XP Pro.
    Note that you cannot edit this file. Captivate does that internally. About all you are able to do is to close Captvate and delete or rename it. Captivate will then cook up a fresh one when it starts up and cannot locate it.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Unwanted text from Master only shows in Preview mode

    Hi, When I preview myMaster document, I see a line of text that doesn't show during Design mode. Any suggestions how to locate and delete it?
    Thanks,
    Ron

    Hi Ron,
    It is very likely the text is hidden in design view. To unhide it, please go to layers and make sure nothing is hidden there. If the "eye" icon is missing from any object in layers, then that object is hidden.
    Regards,
    Aish

  • Text Caption Timing Options Changing after an Edit

    I am trying to highlight a matrix in four seperate slides. I
    made my text caption box and highlight box on one slide and copied
    and pasted for the next three. When I went in to edit the text in
    the 3 copied captions, the timing options changed on me. For
    example, on one I set the timing to 10 seconds and when I tested I
    realized it was showing for only about 3. I have no idea why this
    changed. I found an old post from someone and the suggestion was to
    uncheck some "calculate timing" box. I am using Captivate 3 and
    have found no such box to uncheck. Any help would be wonderful!
    Thanks,
    Kim

    Hi Kim and welcome to our community
    Click the Project menu and see if you have a check mark
    beside the option "Calculate Caption Timing". I'm guessing you do.
    DE-select it and the timing should be left alone.
    Cheers... Rick

  • Acrobat 9 typewriter text doesn't show

    Acrobat 7 made me a big fan of the typewriter feature. Now that I've upgraded to Acrobat 9, I'm having problems with it. Suppose I add some typewriter text to a .pdf and save it. When I reopen the file, the typewriter text doesn't show. My text is there, but I can't see it. If I click my mouse in an area where I typed, the text comes up. I can double click it and edit it as usual. Then if I click elsewhere, the text I was looking at before disappears. So I can only look at one text entry at a time. The typed text does come out on hard copies.
    Does anyone know how to fix this?
    In case it matters, I'm running Acrobat Standard 9.0.0 under XP Pro SP3 on an HP Notebook with 4GB of RAM.
    Thanks,
    Herb

    No luck but thanks...
    Todd Drummond
    (801) 260-0606 Office
    (801) 657-5518 Fax
    <http://www.affordable-printing.com/> Affordable Printing - Signature

  • I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer.  I don't want messages on my computer!  How do I get this to go away and work like it used to?

    I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer.  I don't want messages on my computer!  How do I get this to go away and work like it used to?

    Follow the instructions under the heading "How to unlink a phone number" on this page.

  • Editing text captions changes the Duration setting

    HI,
    I edited a text caption in the Text Caption dialog and closed
    it with the OK button. The duration (Text Caption dialog >
    Options tab > Timing > Display for:) changed although I
    didn't change it. Has anyone had this problem? I looked at the help
    file but didn't find any information.
    Thanks,
    MochaLM

    Hi Rick,
    I sent my reply, but it looks that it didin't get sent, so
    I'm writng this again. Thank you so much for your quick response!!
    I unchecked Calculate Caption Timing, and the problem is resolved.
    You're great! Thanks so much
    !

  • Text Caption appears in Edit Mode but not in Preview Project or Web Browser

    I'm using Cp4 and have downloaded Adobe Flash 10 Active X, it's ver 10.1.82.76.  I've added a simple text caption with these options:
    Timing Display:  Rest of slide
    Appear after:  2.0 seconds
    Transition effect:  Fade in only
    In: .5 seconds
    And Visible is checked
    I also have a simple line that I drew with the draw line tool and included an arrow on the end of it.
    Everything on the screen works including the click box, the animated text and the failure caption.  For some reason the text caption and the arrow are not appearing except in Edit Mode.  In Preview Project, they disapper but the click box, failure caption and animated text work fine.
    I've rebooted, copied this screen into a new instance of Cp4, re-created these objects on a freshly recorded screen, chosen Order: Bring to Front, created a brand new screen completely from scratch and downloaded the Flash 10 Active X version mentioned above.
    They funny thing is, is that the text caption and arrow works fine on other screens in the project.  I have 76 screens total.
    I'm running Windows XP.
    Any suggestions?

    Hi there
    Can you post a screen capture of what your Timeline looks like?
    Odds are your Click Box is pausing in a weird place.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

Maybe you are looking for