Text caption set up to display for all of slide

hello
i'm using captivate 5 and have another query.
is there a way to automatically set up text captions to display for the whole slide not a specific time? I know how to set this, but to go through and do this for every text caption is proving to be very time consuming.
look forward to hearing from you.

The Timing accordion of the Text caption could allow you to apply the setting 'For rest of slide' to all text captions (use the curved arrow, highlighted in screenshot), but the drawback is that this timing accordion also has the start time that will then be applied to all text captions, which is not always what you'll want. So for the example of the screenshot, all text captions would get a start at 4,5secs if I applied this setting to all.
If you want all future Text Captions in all projects to have the setting 'For rest of slide' make changes to the Preferences before opening a project.
Lilybiri

Similar Messages

Text Caption Boxes don't last for 'rest of slide'

Hi!
I have created an interactive Captivate movie (i.e. user must
click somewhere to go to the next slide) with various Text
Captions. I've set each text caption to last for 'rest of slide'.
However, in some cases the captions only last for an amount of
seconds whereas Text Captions on other slides, with the same 'rest
of slide' setting, last until you click to move forward.
Any ideas why some text captions do last for the rest of the
slide and some don't, even though they have the same settings under
the Options tab?
Please help!
Thanks!
Mark

Hi Mark and welcome to our community
It is usually all in the timing. For example, if you have a
click box or a button that pauses the slide, it could be that
clicking it moves to the next slide. In this case, let's assume the
slide is a total of six seconds long. But the click box pauses at
two seconds. So you would see the caption for two seconds, then
when the click box is clicked the next slide would display
immediately.
Or possibly the caption is set to fade in and out and the
click box or button pauses after they fade out?
What does the timeline show for the captions that misbehave?
Sincerely... Rick

How to put a text in upper left hand corner for all the application?

I want to put a text in upper left hand corner for all the pages on application?
I don't want to put one page by another.
Thank you.

If you put it in a region on page zero, it will be inherited by all pages of the application.. Literally in the upper left corner? Even the login page? You could also modify the template page that your using from your theme, so that all pages would have this attribute, whichever you are more comfortable with..
Thank you,
Tony Miller
Webster, TX

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents.

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents and I've run Repair on Microsoft Office.
I don't know what else to try.
Any help would be appreciated. Thanks.

A hotfix request has already been submitted for this issue and we have also documented it here
http://support.microsoft.com/kb/983097
Thanks.
Tony Chen
TechNet Community Support

Is there a way to allow setting of "Due Date for All Tasks" to current date in OOB Workflow

Is there a way to allow setting of "Due Date for All Tasks" to current date in OOB Workflow
I need to set it today because there are tasks that is needed to be completed on the same day.
Is there a way without modifying the page/form. like a configuration or something?
----------------------- Sharepoint Newbie

Hi ,
As Ajeet said, for implement your requirement, you can change the data validation on the Due data field.
You can do as the following :
Open the site with SharePoint Designer 2010
Click on Workflows on the left launch, then find ‘Approval-SharePoint 2010’, click on it
On the Forms section, click ‘ReviewApproval_***.xsn’
Then you can find Due Data for All Tasks, and change the validation
In addition, if you create an approval workflow with SharePoint Designer, you can use a specific date, it contains hour and minute.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Set a default layout for all users via DIAPI

Hello everyone,
I am attempting to set a default report for all users/business partners using the DI-API.
I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
(stripped down for clarity)
Dim oDefaultReportParams As DefaultReportParams
oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
oDefaultReportParams.LayoutCode = sMyLayoutCode
oDefaultReportParams.ReportCode = sMyReportCode
Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
Code executes fine, but it doesn't have the expected impact on settings. The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
I experimented by including and setting the following properties to every combination I could think of with the same results
oDefaultReportParams.UserID = 'tried 1, 0, -1
oDefaultReportParams.CardCode = 'tried "", "0", "-1"
Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
Thanks!

Hi,
Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
Thanks.

Allow only one set of parameter values for all worksheets

I would like to " Allow only one set of parameter values for all worksheets ", but prompt before executing the worksheet. This function is a great time saver, but the users on occasion would like to change at the least one of the parameters. Is this possible? What setting do I use? I've tried various combinations of the " After opening a workbook: " on the options page. " Run query automatically", " Don't run query (leave sheet empty) ", and " Ask for comformation ". I would have thought that "Ask for comformation " was the trick, but no. I'm considering putting a do nothing parameter that has the setting of " Allow different parameter values for each worksheet. " so that it will keep all the others, default this one, but prompt for a possible change.
Any thoughts...
Thanks,
Jamie

Hi Jamie
Even though you have the same parameter for all worksheets a user can still choose what to use on a worksheet. Its just that if they click to another worksheet then that parameter will be applied.
Which version of Discoverer are you using?
Best wishes
Michael

CMDLET commands regarding setting a default font for all users using OWA on an exchange 2010 platform

HI,
We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems. The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems. However, when I try and run the following command
Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
"property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later. The object's currant version is 0.0 <6.5.6500.0>"
What object is this reffered to? Can anyone help please?
Thanks
Paul

Hi,
To set a default font for all users, you can use this command: -
Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
You can use any font style in place of “Trebuchet”.
I hope this information will be helpful for you.
Thanks and regards
Ashish@S
Ashish@V

Delayed text captions not appearing (except in Preview "Play this slide")

Can anyone explain why my delayed text captions are not appearing in any mode BUT Preview/Play this slide. When I do that type of preview, the text captions show up exactly when I set them (starting at 27s - and are set to display for 'rest of slide').
There are eight delayed text captions and none of them show up with I preview the Project, From this slide, or Publish.
The visible flag is on, time is "rest of slide", appear after 27s, effect is not relevant, and it is not a layers issue.
Thank you

Hi Shawn
Belive it or not, I wasn't being sarcastic. Only Buttons, Click Boxes or Text Entry Boxes will pause playback of a slide. So I figured if I asked how many you had, you would scrutinize the slide and perhaps discover one you had missed.
Play this slide doesn't behave like the other preview. This doesn't mean it's bad, just different. You simply have to understand that the only real reason for using that type of preview is to achieve a rough representation of timing elements. When will they appear and disappear. As you have discovered, you may not interact with them. You may only watch them. It's a bit like watching something through a window. You cannot reach through it and touch anything.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to set a common page for all users after loging on?

hi all,
Now "My Dashboard" is the default page after logon.
i want to set a default home page for all users. users can see the home page after loging on.
how to change the default dashboard from "My Dashboard" to "Home page" for all users?
thanks,
dan

Hi,
Steps:
Tried to set default dashboard for all the users.
1. Created a session init block
2. Used data source as select '/shared/SH Test/_portal/Test1' from dual
3. Assigned this value to PORTALPATH session variable
4. In Presentation services > Administration > My account > Default dashboard should be set to 'default'. Then only the dashboard specified in init block will be displayed otherwise My account will override the init block.
5. Save the changes made to rpd.
5. Logout and relogin to see if it is working fine. it is working perfectly fine.
For details please refer the GSC replication document. But it is for all the users.
if customer would like to have user/group based home page.
1. They may need to have 2 separate tables.
i. Group_path_tab with 2 columns. Group_id, portal_path
Have group wise portal path for all the groups
ii. User-group map table
Group_id, Group_name, user_id
User should be part of some group.
2. Then in the init block write the sql should be something like this
select A.portal_path from Group_path_tab A, User_group_map B
where B.user_id = :USER
and B.Group_id = A.Group_id
SO based on USER session variable, it will try to identify the group and then the portal_path.
Finally assign this value to PORTALPATH session variable.
ref:
http://total-bi.com/2011/01/obiee-11g-change-default-dashboard/
Thanks!

How could I set a fixed window for all resulution?

because I design the website in MAC when I transfer to PC it
change shape
how could I set a fixed size window for all resulution?

Using layers for page layout is just asking for trouble.
Trouble with
centering content, and trouble with expanding text.
Use tables until you can manage a proper CSS layout scheme,
i.e., NOT
layers. Start here -
http://www.projectseven.com/tutorials/css/qdmacfly/index.htm
http://www.macromedia.com/devnet/mx/dreamweaver/css.html
http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Media Fusion" <[email protected]> wrote in
message
news:[email protected]...
> What would you suggest then, and why not layers? I am
just going off of
> what I
> know and I am completly open for correction or cretique
on process,
> thought
> process etc...
>
>
quote:
Originally posted by:
Newsgroup User
> Ugh.
>
> Layers? Surely you jest?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Media Fusion" <[email protected]>
wrote in message
> news:[email protected]...
> > yes excatly, nothing should change when you bring
the files from mac to
> > pc, the
> > only thing that may be a slight issue is how you
coded the fonts for
> > text.
> > As
> > long as you set it up with pretty universal fonts
not much should
> > change.
> > I go
> > cross platform all the time, code is code. If you
want to really contain
> > the
> > positiong and location of your site design look in
to using layers in
> > combination with tables. That fixed my problem with
how different
> > browsers
> >
>
>
>
>
>
>

DCIteratorBinding setting the same value for all the rows.

Hi all,
I have table with on of the column as id. I have made the id column as the hyper link , that takes me to the next page. I am trying to pass the id to the next page. I am using the managed bean for the same. The below code is used to create the link on the column. It sets the action to the function in the bean that sets the id as of the current row.
<tr:column sortProperty="id" sortable="false"
headerText="#{bindings.notification.hints.id.label}"
id="c4">
<tr:commandLink action="choice" text="#{row.bindings.id.inputValue}"
id="cl1" actionListener="#{IdBean.extractID}">
</tr:commandLink>
</tr:column>
below is the IdBean.extratctID()
public void extractID(ActionEvent actionEvent){
BindingContext bindingContext = BindingContext.getCurrent();
BindingContainer bindings;
bindings = bindingContext.getCurrentBindingsEntry();
DCIteratorBinding iter;
iter = (DCIteratorBinding) bindings.get("notificationIterator");
Row rw;
rw = iter.getCurrentRow();
String id;
id = (String) rw.getAttribute("id");
this.setId2(id);
I am printing the id value on to the next page. But its just returning the vslue of the id for the first row for all the rows of the table.
Any inputs as in do i need to refresh the iterator or something like that.
Reagrds
Sishant

Hi,
Following is the code i have added in my bean
ValueExpression expression = getFacesContext().getApplication().getExpressionFactory().createValueExpression(getFacesContext().getELContext(), "#{pageFlowScope.emp1}", Object.class);
Object id = expression.getValue(getFacesContext().getELContext());
public FacesContext getFacesContext() {
return FacesContext.getCurrentInstance();
JSPX Code -
<af:commandImageLink id="DuncanAngove"
icon="/john.gif" partialSubmit="true"
actionListener="#{Tweets.setEmployeeId}">
<af:setActionListener from="Duncan Angove" to="#{pageFlowScope.emp1}" />
But i am getting NullPointerException. I have tried it with application and request scope as well.
javax.servlet.ServletException
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
     at org.apache.myfaces.trinidad.component.UIXComponentBase.getValueExpression(UIXComponentBase.java:231)
     at project1.Tweets.setEmployeeId(Tweets.java:40)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     ... 35 more
Thanks
Sishant

Text caption - changing place when displayed in different browser

Hi,
I just finished my playbar and I discover problem with text caption (with action SlideCount - once again many thank for Lilybiri). During tests in different web browsers tc is changing place as you can see it below:
Safari, Firefox and Opera are ok but Chrome and internet explorer are not. I was testing browsers on mac and pc - same result.
Any ideas?
Michal

Hi Pozwin,
Thank you for contacting Adobe Support.
Please check your P.M. which we have send you.
Thanks
Loveesh Kuma

How do I set a Finder background for all users?

I want to set a background in Finder for a folder hosted on a server, and I want all users who connect to that folder to see the background (and, necessarily, force them into Icon view for that folder). Is there a way to do this? Server is running 10.5.8, clients are running a mix from 10.6.7 to 10.7.1.

But I dont know how to set a default website name that appears at the top of EVERY page. Can you help?
You cannot set a default name for your webpage.
Each page is unique.
But you can make a default page and duplicate it.

How can I set default toolbar layout for all users in my system?

Hi everybody! I am running a local ubuntu server at my office. I can set some defaults preferences (about:config) for all new users in the system by defining those prefs in the /etc/firefox/syspref.js.
Now, I want to define default toolbar layout in a similar way (maybe not needed but fun), to copy the toolbar layout for my user. Is there a general way to do that?
thank you in advance!

You can try to create a default template folder (defaults/profile) in the Firefox and place the file(s) in that folder for newly created profile.
The only way to customize an existing profile is to copy files directly to it.

Text caption set up to display for all of slide

Similar Messages

Maybe you are looking for