Text Causing Lag in the Playback

I have noticed that if I have a decent amount of text on the
stage, whether it is in motion or not, it creates lag for anything
else that is in motion. I have tried both static and dynamic text,
both causing the same issue. Is it my computer? Or am I just
missing something? Thanks in advance.
GAMBRKER

first of all Its not your computer
, every time you use large amount of text you will
face a lag in the CPU, however there is a solution to avoid the
lag, but this will cause to have a large file size.
Try to break the text apart and group every paragraph for
example as a symbol, this will solve the lag problem.

Similar Messages

How do we cope with the wretched performance of iphone4 with IOS 7.0.2. Before update it was working fine. Since, the text entry has 4 to 10 seconds buffered lag, and the impresssion is that the processor is overtaxed. Not at all acceptable for a compulso

Since compelled to take the IOS 7.0.2 "upgrade" I experience 4 - 10 second delays in text inputting. The keystrokes are buffered then displayed. Other signs suggest the processor is under way too much load.
I haev reduced the concurrent apps to 1. turned off location services, most notifications etc etc .
It occurs like this on Twitter and FB, and IM and simple text messages.
Clearly the software is too processor intensive for iPhone 4
Will this be addressed?
Are there more configurations I acn adopt to manage the overload?
I think I ve turned everything off that I can without shutting down the 3G fundctions WiFi and phone.
My smartphone has been rendered dumb by the Apple Core
Needs fixing or I'll shop for a Samsung neXt

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persist back up and restore as new via iTunes
Peace, Clyde

Stuttering/lag durring QT playback

I'm running into a problem where clips that are playing in Safari are frequently stuttering (i.e. video & audio cut out, or audio keeps playing, but video freezes.) This doesn't happen when I download the movie and play it in the QT application.
I've played around w/ the setting in the Quicktime app, but it doesn't seem to make any difference. I'm using a cable modem to wirelessly connect to the 'net, so I think I should be able to watch streaming vids w/ no lag. Any ideas?

Since downloaded files play okay on your system, I would assume the problem is most likely in the ISP connection. This usually occurs when connection speed drops down to or below the playback data rate of the file coming in to the QT Player. Cable modem spreeds are drastically reduced during periods of high user volume. Sometimes the weather can cause problems -- especially if any of the upstream cables are of the older, buried type. If the problem comes and goes or steadily gets worse, it might be a good idea to have your ISP check the incoming signal.

Text is truncated on the right side of a text field. How to solve?

Hi group,
I use CR for the .NET Platform 10.2 (VS 2005/.net2.0). In several cases the texts in my crystal reports are truncated on the right side of the text fields (which can show more than one line and which are set in the way that it increases if more than one line is needed).
I created the CRs with CR in VS 2003. Then I migrated the VB.net project from VS 2003 to VS 2005. Then, when I opened a CR in VS 2005 and saved it again I got the message that it will be changed to the newer version if I click "yes" (or perhaps it was the "ok" button). I guess that was the moment the CR was migrated to the newer CR version.
Because of the truncation problem I created one of the CRs completely new with exactly the same settings (i.e. the heigths of the sections, the widths of the text fields, and all the other setting are completely identical to the CR created in VS 2003). Interestingly, the texts are truncated in none of the text fields any more.
Have I done the migration correcty? (Is it really opening the CR and saving it an saying "yes" or should I rather have done it in another way?)
Does somebody of you already have had this kind of problem? How could it be solved without creating all CRs anew?
Does recreating a CR which shows truncation of texts really solve it, or is truncation caused by something else, perhaps a certain property of a CR etc?
The "printer" is set to "no printer" in all CRs. The truncation does show independent of whether the registry entry "HKEY_CURRENT_USER\Software\Crystal Decisions\10.2\Crystal Reports\Export\PDF\ForceLargerFonts" is set to 1 or to 0.
Thanks for help in advance
Kind regards
Michael

>
Ludek Uher wrote:
> There is a fair number of kbases in the kbase search (https://www.sdn.sap.com/irj/sdn/businessobjects-notes). Most of these refer to fixes. It may be a good idea to get the latest SP for your version of CR - CR 10.2?) and see if that helps. The latest SP for CR 10.2 is here:
>
> https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
>
>
> Ludek
Hi Ludek,
I already installed crvs05sp1 a few months ago (still traceable by the dir "C:Program FilesCommon FilesBusiness ObjectsPatchesCrystal Reports for Visual Studio .NET 2005 Service Pack 1" on my computer).
Unfortunately, I cannot find any fitting entry in the kbase. If I search for "text truncation" or "text truncated" i get results but they are about pdf or word or fixed truncation problems in older CR versions.
It seems as if I am the only one who has to face this problem :-).
Best,
Michael

Layer Styles / Strokes causing lag 64bit PS

Hi There,
I'm a comic artist using Photoshop CC (64 bit, Version: 14.2.1) on a Windows 8.1 machine, with a 4th Gen i7, Nvidia 750M 2GB GFX card and 16Gb RAM. 'Use Graphics Processor' is set to Advanced and Memory Usage is set to 10348Mb (71%).
I'm running a dual screen setup with a Wacom Cintiq 21UX hooked up via HDMI to my Dell XPS 2720.
I typically work on an A4 size document at 400dpi.
The problem I'm having is with tremendous lag when using the transform tool to scale things up and down and when using the standard brush tool for comic art linework.
I have a group of layers with all my speech bubbles and text in. With each white speech bubble on a seperate with a Layer Style / Stroke of 5 pixels around each one.
If I hide all of the speech bubbles (But not the text) then scaling using the Transform tool is nice and smooth and 100% lag free, as it should be on my spec machine.
If I disable Graphics Processor Settings, or scale them down to Normal or Basic the problem is exactly the same.
If I use the 32 bit version of Phtooshop CC scaling and brush storkes are lag free even with the speech bubble layers visible.
I've updated my system bios and GFX card drivers to the latest Dell release.
It's an annoying technical hiccup that I've found a workaround for but I would like and expect to be able to use basic tools like Transform and the Brush without lag, with all layers visible.
Any help would be greatly appreciated.

Hi, Thanks for replying to my thread.
After posting to a new thread here:
http://forums.adobe.com/message/6263746#6263746
Through my own roundabout way I got to this same conclusion.
So yes, you're completely right, it helps massively. If only you'd been around a few weeks ago.
Thanks again.

Need text and image in the message

Hi,
I need to send an email with an image and text as part of the message, Ill do the following but it jsut takes the text and as an attachment, how can I include both content in the body of message??
BodyPart texto = new MimeBodyPart();
texto.setContent(fichero, "text/html");
multipart.addBodyPart(texto);
// Procesar la imagen
MimeBodyPart imagen = new MimeBodyPart();
imagen.attachFile("C:/Documents and Settings/Administrador/Mis documentos/Sandra/epinuevo/web/imagenes/logo150px.jpg");
imagen.setHeader("Content-ID", "<figura1>");
MimeBodyPart imagen1 = new MimeBodyPart();
imagen1.setText("Sandra");//.attachFile("C:/Documents and Settings/Administrador/Mis documentos/Sandra/epinuevo/web/imagenes/logo150px.jpg");
imagen1.setHeader("Content-ID", "<nombre>");
multipart.addBodyPart(imagen1);
message.setContent(multipart);
Thanks!!

Milene wrote:
bshannon wrote:
If you're still having trouble, you can find a message created by some other
program that has the overall structure you want, and then copy its structure.I dont understand what do u mean exactly.You want your message to look and behave a certain way.
Find another message (with different content), that looks and behaves similarly to what
you want. Perhaps you can create such a message using another mailer. Or perhaps
you've received a message from someone else that is similar to what you're trying to do.
Then, look at that message using the "view source" function of your mailer. You'll see all
the MIME headers, etc. You can then use a similar MIME structure in your message.
You'll also see the content of the body parts and how the content references images and
URLs. Use a similar technique in your message.
But I was trying to include the image and the text as 2 different MimeBodyPart, now I found a simple solution I add html code as part of the message where there is a reference to the image, all the text in in the code.
But now I have a problem cause I have in that html code an URL as an > but when i recieve the mail the url doesnt work, is there any other funciont to add urls in a special way???
A URL reference like "xxxx.jsp" is implicitly relative to the html page containing the reference.
When you include the html content in a mail message, the reference is relative to the mail
message. That's not what you want. You want the reference to point to your web site. The
simplest solution is to just use a reference like "http://myserver/myurl/xxxxx.jsp".
Note that viewing html in a mail message is not exactly the same as viewing html on a web
page. Different mailers will impose different restrictions on what you can do in the html in a
mail message.

IPhone - Typing lag, text scrolling, lag

Hi all,
After upgrading to 2.0 I've experienced lag while typing in many areas (text, Safari, Contacts, etc.) - it takes a second or two for the screen to display what I've entered. At this point, I'm able to type a few words before it decides to diplay. In addition, scrolling through the phone is a chore as it freezes when selecting Contacts, Recents and so on.
To make things more interesting, there are times when I am unable to scroll to the bottom of existing text messages - when selecting the text, it will not be at the bottom. Rather, it will be 4-5 texts up - it is possible to scroll to the bottom; however, it will not stay there. To text, I must enter the text area then press the Home button a couple of times - this seems to happen when there are unread texts available.
Turning iPhone off and on has not helped, seems like a restore is the next option though any suggestions are always welcome.
Regards,
Jason

I have this same problem and it drives me absolutely INSANE!!! It wasn't apparent before 2.0 and multiple restores have done nothing to correct it. Apple needs to get on the ball.... So far the iPhone has, in general, been a huge disappointment and I purchased Day One. Of all the Apple products I have owned in the last 9 years, I must say that Logic (all versions) and the iPhone are the only ones I would consider crap. I use Ableton Live because it's way better software for producing electronic music than Logic but there is no better option concerning the iPhone. If Apple would offer Logic as a plugin package or simply allow it to be ReWired as a slave application I would go back to using it. ****, I'm Apple Certified in Logic and I won't use it anymore!!! I seem to have gotten off topic.... Apple please fix the iPhone (and Logic while you're at it).
P.S. I will not be surprised if my post gets deleted as Apple is rather touchy about technically-minded people giving poor reviews of their products. They should focus instead on making sure their products perform at the top than hushing the opinions of their pro users. Just my .02!!!

Why is the playback in Final Cut Express 4 delayed by 30 seconds?

I am finding editing with Final Cut Express 4 has gotten slow and frustrating. This is a new problem. I have used this software for two years with no problems until now. I'll start out editing a project normally for about an hour. Then the playback function starts to lag. After I render a clip and try to play back what I've done by hitting the space bar, I have to look at the spinning color wheel for 30 seconds before my video will play. I have no other programs open, I have 10 GB of RAM. I upgraded my OS from Leopard to Snow Leopard a few months ago. All my Apple Software is updated. FCX has also been crashing and locking up. Is there a preferred way to save my project for more efficient editing? I also tried starting a new project with only a five minute audio mp3 clip and a 10 sec slug for video. I get the same playback delay with this project. In this case I only saved the project not "save all".

Hi Robert,
I've never unistalled and reinstalled an OS so it's a little scary for me.
I suggested uninstalling/reinstalling Final Cut Express, not the OS!
When I click on the FCE icon on my task bar to open it, which version is being opened?
Probably the one on your 1TB drive, but to be sure, you can always just open your /Applications folder on the 1TB drive and double-click the FCE application to start FCE.
Could there be a problem with a duplication of applications such as FCE on these two drives?
Highly unlikely. The system looks for applications in the /Applications folder on your startup drive, which is now your 1TB drive.
My video is 4:3 so I chose 640x480 to prevent stretching of the image.
No, you need to choose 720x480 (DV-NTSC) frame size. This is the standard 4:3 DV frame size. 640x480 is a computer monitor resolution. 720x480 is the actual, standard def, DV (television) frame size. It is 4:3. The 720 line height includes something called "overscan" which you never actually see. The image you see will be 4:3. FCE is not designed for 640x480 frame size ... do you have to render these clips after you put them in your DV-NTSC sequence?
Then after about an hour of editing, the playback delays started up again.
Well, that's bizarre, I must admit. Kinda has me stumped, except for the possibility that FCE may need to be uninstalled/reinstalled.

Operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?

operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?
How to reproduce the issue：
1.Create a new PPT slide in Office2010.
2. Insert a certain text/characters, such as Mircosoft blablabla,
3. Insert an URL right after the text part , TextToDisplay is the “Test”，Address is the "Url".
4. The content in the ppt is ”Microsoft Test“，here "Test" is the hyperlink which we would like to convert. Please execute the code we list below.
5. The problem will be reproduced by the above steps.
PPT.Application ap = new PPT.Application();
PPT.Presentation pre = null;
pre = ap.Presentations.Open(mFileName, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (PPT.Slide mSlide in pre.Slides)
PPT.Hyperlinks links = mSlide.Hyperlinks;
for (int i = 1; i <= links.Count; i++)
PPT.Hyperlink mLink = links[i];
mLink.TextToDisplay = mLink.TextToDisplay.Replace(mLink.TextToDisplay,"url");
mLink.Address = mLink.Address.Replace(mLink.Address, "url");
Modify texttodisplay, the address vaule will be assigned as null. Anyone knows how to solve it?
Does it caused by a PPT API's Limitation?

I've tried the below code and it works, you can refer this article:
https://msdn.microsoft.com/en-us/library/office/ff745021.aspx
to find that the hyperlink needs to be associated with a text range, and thats what I did in the code below with the help of the link sent by Tony.
Microsoft.Office.Interop.PowerPoint.Application ap = new Application();
Microsoft.Office.Interop.PowerPoint.Presentation pre = null;
pre = ap.Presentations.Open(@"C:\Users\Fouad\Desktop\abcc.pptx", Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (Microsoft.Office.Interop.PowerPoint.Slide mSlide in pre.Slides)
Microsoft.Office.Interop.PowerPoint.Hyperlinks links = mSlide.Hyperlinks;
Microsoft.Office.Interop.PowerPoint.Shape textShape = mSlide.Shapes[1];
for (int i = 1; i <= links.Count; i++)
Microsoft.Office.Interop.PowerPoint.Hyperlink mLink = links[i];
Microsoft.Office.Interop.PowerPoint.TextRange range1 = textShape.TextFrame.TextRange;
TextRange oTxtRng = range1.Find(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay,After:range1.Start,WholeWords:Microsoft.Office.Core.MsoTriState.msoTrue);
oTxtRng.Replace(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay, "url");
oTxtRng.ActionSettings[Microsoft.Office.Interop.PowerPoint.PpMouseActivation.ppMouseClick].Hyperlink.Address = "http://www.microsoft.com";
Fouad Roumieh

I did the 8.0.2 update and no longer have my speak to text microphone down by the smileys. Don't want to use audio text. How can I get this back?

I did the 8.0.2 update and no longer have my speak to text microphone down by the smileys. Don't want to use audio text. How can I get this back?

Hey there tjbliven,
It sounds like you are not able to use the dictation feature of iOS 8, becuase the microphone icon is missing. It seems to me like Siri may be turned off, which would cause the icon to not be there:
Siri settings - iPhone
To set options for Siri, go to Settings > General > Siri. Options include:
Turning Siri on or off
That should get the dictation feature back for you.
Thank you for using Apple Support Communities.
All the very best,
Sterling

When throwing Warning Message from EOImpl, Text, Cause and Action is coming

Hi,
When I am throwing JBO Exception through EOImpl code, I am getting warning message with Text, Cause and Action, But my aim is to get only Text message.
/* Code used */
JboException e = new ApplcoreException("Message Code");
e.setSeverity(JboWarning.SEVERITY_WARNING);
throw e;
/*end*/
Please suggest some approach.
Thanks
Ankur

Applcore is not availble to the Outside world , so better to post this on the internal ADF Frontend forum.
I suspect there might be another API to do this .

Editable form text editing messing up the whole form

Hi All,
I've created a fillable form in Acrobat X but at the end, I realized that I left a spelling mistake. Now when I try to fix this mistake using Edit Document Text, it changes the orientation and alignment of other fields around it causing messing up the whole form. Can anyone advise any solution. I can provide the form to you to have a look or correct it for me if someone can kindly. Please advise as this is urgent and this form needs to be delivered ASAP. Please see the screenshot below. I need to correct the spelling of Blocked which is written as BOCKED without changing other formatting of the document. Thanks in anticipation!

Hi @Gilad,
Thanks for the suggestion but this file was originally created in Word and after conversion to PDF, I've made a lot of radio buttons, check-boxes in this file which I certainly don't want to redo. Now if I convert this page back to Word and edit this single word, then it means that I would have to create all the radio buttons, check boxes etc again which is time consuming. Any help if I can just correct the spelling of this single word without changing the formatting of the fields besides it?

Anyone notice the playback screen freezing?

I have the latest version of mainstage and noticed today that if a set is playing a backing track and you hit the next set button and then hit play for that sets backing track the display build in to the concert screen (not the playback plug in screen) does not scroll
can anyone replicate this??? am getting slightly nervous now as I have a gig tomorrow!

Well, in my opinion the battery life with iOS 6 on iPhone 4S is now much better!
1 % left and I have 8 hrs and 17 minutes usage and 1 day 7 hrs standby time. (I browsed the web, sent some E-Mails with pictures & received some text E-Mails, made some calls, used iMessage, Siri, Facebook, iCal, Contacts and other apps like Dropbox. Also I have 2 E-Mail accounts on "Push" and iCloud activated with all its features, except iCloud Mail and iTunes Match!)
With iOS 5.1.1 I hardly reached 6 hrs usage time.

What is forwarded when " as in-line text" is selected in the drop-down box for forwarding a message. i.e. are attachments forwarded?

What is forwarded when " as in-line text" is selected in the drop-down box for forwarding a message. i.e. are attachments forwarded with the message or not?

Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP.

Text not viewable in TL playback but in Print to tape on empty TL place

Many thanks for reading my problem.I have finished my film on FCP4.5 on 1 GB RAM, 10.3.5 and QT pro 6.5.2 on 2 GHz PMac. All is well when I view text clips from the TL on a broadcast monitor thru a DSR-45 SONY recorder. However when I have taken a print to tape of the entire sequence and now when I play the tape then at the place where certainly the text clip has gone or faded to black( used the Fade in fade out transition) then I can still see a light impression of the text i.e immediately when the text clip ends with the transition I have used black(slug) for 10 seconds and the text is visible there with a slight impression. I thought that this is a VTR problem changed it but the same problem persists. The irony is that the problem does not shows when I simply view the clip on the TL playback. Have also changed the monitor.What should I do to take a Final print as now the project is finished but I am stuck at this stage. I also did a an export of the entire sequence in DV PAL then reimported it back in another project the problem was again coming up in the print but not in the TL playback.
Please please suggest where I could be wrong at.Is it problem of the Hard Disk as I am using an Internal HDD for media acquisition.
Bye and warm regards to all the members.

Don't use the fade in/fade out transition for this. Just use the cross dissolve and see of that works.
This is the Final Cut Express forum, by the way.

Text Causing Lag in the Playback

Similar Messages

Maybe you are looking for