Text content lost when using attachments. iPhone 4 (iOS 5.1.1)

When I want to add pictures to an email attachment in my iPhone 4, I usually use the Gallery App which gives me the option of sharing them in an email. When the pictures are added to the email, they are added in the body of the email. You have the option of adding text above, between, or below any pictures that you have added. However, when the email is sent and delivered to the recipient, all text between and below any pictures has been stipped away! Very Frustrating!
Am I doing something wrong or is this just a massive bug?

Lawrence,
Thanks for your reply. Good tip, I will check each app.
To clarify the problem I am having, I use the app named DataMan to monitor my cellular data usage, and it has a screen where it can show on an hour by hour basis which app is using data. I am seeing "Push Service" listed as using 1-5 megabytes every once in a while. I have a 200 MB data plan and this is very adequate for my own usage which is light (no streaming). I have noticed my data usage is higher than ever and the culprit appears to be the Push Service. I have actually reduced my own usage.
Thanks again,
Maurice

Similar Messages

When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

For each iPhone...
From the Summary tab select: Sync only checked songs and videos.
Under Options in the Summary tab select: Sync with this iPhone over Wi-Fi
If you want you can select: Manually manage music and videos.
Select the music you want synced from your iTunes library, same with Contacts.

When using the iphone 6 Plus. I use iMessage it is terribly slow to attach photo or take a photo the app does not show camera and slow... like 2 mins at least.

When using the iphone 6 Plus. I use iMessage and then attach a photo or take a photo... the app does not show the camera fully or even to attach a photo does not work. I have about 8-9000 phones and like 10 short videos in there but it is incredibly slow and almost unable. I have the 128GB iPhone 6 Plus with 46 gb still available. I think this should not be so slow with so much memory still available. Please help. I am using 8.1.2. Yes I have set up the phone as a new phone. Apple store even reformatted this iphone 6 plus 2 months ago but it is still terribly slow Thanks

Hey Bender1031,
Thanks for the question, I can definitely understand how frustrating this issue may be with a brand new phone. Great troubleshooting so far by already attempting a restart and reset. If the issue persists, let’s try restoring your device and updating to the latest software (iOS 8.0.2):
Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
- If the issue is still present, you may want to contact Apple Support.
- If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
Thanks,
Matt M.

Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

Why is it when using my iPhone 4s front camera, the screen sometimes turn black or have blue stripes on it? What's wrong with it and what should I do?

When using my iPhone 4s front camera, the screen sometimes become black or have blue stripes on it! Is this a hardware or software problem? Can this issue be covered by my warranty? I bought it inmid-december last year, and this problem came at around Late January. It's a rare case, only came about 5 times, but this really concerns me. What's wrong with it? Thank you so much for your concern.

thank you for your reply
I brought it to the store and they agreed to give me an exchange. thank goodness!
I have a new question: I've now transferred my back up datas to my new iphone. They wanted me to register, so I registered (as my old apple ID) and then they asked if I want to restore backup, I did that too. after the restore back up process, the only things that aren't there were my music and apps! what should I do to get them into my new iPhone?

Panel contents overlap when using borderSkin style and layout=absolute

This problem has been reported on several occasions
(http://bugs.adobe.com/jira/browse/SDK-14806)
and there are several articles that talk about this:
http://dougmccune.com/blog/2008/01/17/followup-about-flex-panel-bug/
http://dougmccune.com/blog/2008/01/12/calling-********-on-a-resolved-flex-bug/
I´m not an expert but think I found a fix/workaround for this.
frameworks\projects\framework\src\mx\containers\Panel.as
Must to be changed in the viewMetrics() method.
Line:
973- if (FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) 974- {
Replace by:
if ((FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) || (getQualifiedClassName(border) != "mx.skins.halo::PanelSkin") || (getStyle("borderStyle") != "default") ) {

Hi Andres, I haven't tried to verify your fix, but would you be willing to fill out a contributor agreement and submit an official patch? Matt On 4/25/08 12:34 PM, "Andres Serral" <[email protected]> wrote: A new discussion was started by Andres Serral in Developers -- Panel contents overlap when using borderSkin style and layout=absolute This problem has been reported on several occasions (http://bugs.adobe.com/jira/browse/SDK-14806) and there are several articles that talk about this: http://dougmccune.com/blog/2008/01/17/followup-about-flex-panel-bug/ http://dougmccune.com/blog/2008/01/12/calling-********-on-a-resolved-flex-bug/ I´m not an expert but think I found a fix/workaround for this. frameworks\projects\framework\src\mx\containers\Panel.as Must to be changed in the viewMetrics() method. Line: 973- if (FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) 974- { Replace by: if ((FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) || (getQualifiedClassName(border) != "mx.skins.halo::PanelSkin") || (getStyle("borderStyle") != "default") ) { ________________________________ View/reply at Panel contents overlap when using borderSkin style and layout=absolute <a href=http://www.adobeforums.com/webx?13@@.59b51731><a href=http://www.adobeforums.com/webx?13@@.59b51731> Replies by email are OK. Use the unsubscribe <a href=http://www.adobeforums.com/webx?280@@.59b51731!folder=.3c060fa3><a href=http://www.adobeforums.com/webx?280@@.59b51731!folder=.3c060fa3> form to cancel your email subscription.

Network is lost when using GPS on 3GS

Network is lost when using GPS on 3GS.
ver. 5.1.1 (9В206)
model MC637RR
SN 86223J1DEDG
05.16.05.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Where did the options go to "write something" or post a picture on my facebook groups, when using my iphone?

The options have disappeared from my facebook groups for me to post a picture or write something when using my iphone. I can access everything from my computer, but not my iphone. Whats up?

Is there an update needed for the app? What did the app developer say when you contacted them?

TS4268 How do I get facebook to say "posted from IPhone" when using my IPhone?

When posting anything on facebook from my Iphone 4s. it tags as "posted from Mobile" how can I get it to say posted from Iphone. and yes I downloaded the facebook app from the app store and when using the app it still says from posted from mobile. it would be nice to know that i spent alot of money for this phone, the least it can do is let my facebook friends know that i dont just have a mobile phone but an Iphone. Please HELP.

This has nothing to do with Apple or the iphone.
this is on the facebook developer, the posted from iphone was been removed a long time ago. It now say IOS or mobile.
If you don't like it I suggested you email the facebook app develper.

Exchange OWA inbox contents deleted- when accessed by Iphone 5

My university uses Exchange/Outlook and has the OWA (Outlook Web Access) site available for checking email when offsite.
Starting last month I found that when I use my Iphone to view my OWA mail that the entire contents of my Inbox on the Exchange server instantly deletes. When new emails arrive and I check them again in the OWA, they vanish after a couple of seconds. When I log into the OWA from a laptop the messages really are gone. But if I go into 'recover deleted items' I'm able to restore them. The question is what is causing this behavior?
- When I configure my Iphone 5 account I simply go to Settings/Mail, Contacts, Calenders/Add account/Exchange.
- There's no option to make this a POP or IMAP account, select auto discovery, or delete upon reading...this is not Apple Mail...the phone simply auto configures to use https...very basic.
- I have no rules set on my desktop Outlook client.
- Logging into my OWA works normally, its only when I view it from my iphone that the inbox is deleted.
My Exchange admin is stumped. There seems to be a lot of complaints about this online but no solutions. Anyone have any ideas?

Hi,
I have the same issue,
and sometimes maybe related to an Exchange Problem.
try reading this
http://support.microsoft.com/kb/2212449
and this
http://social.technet.microsoft.com/Forums/office/en-US/2da6c752-5221-4dbc-b1fe- 6aac0c059176/outlook-2010-moves-message-directly-to-deleted-items-how-can-i-dete rmine-why-this-has-happened
for me the "AutomateProcessing" value on the mailbox was right,
so I looked for an iPhone issue...
let me know,
bye,
Fabio

No content loads when using portal links

We recently upgraded from 3.0.9.8.2 to 3.0.9.8.5 and in the new version we are having issues with our favorites portlet as well as any links that users create to send to other users. In the new version, after a user logs in, if they click on a saved favorite link, the new page does not load. The tabs at the top of the screen stay and the content of the page is left blank. The same thing happens if you copy a link into the browser window after logging in. However, if you navigate to the tab that the link is going to, and then go back to the login page and use the link, it works fine. We have a TAR logged with Oracle and they do not know what is wrong. Has anyone experienced a similar problem or know a solution?
After testing, we came up with something interesting. When we were creating favorites, we were going to the page we wanted, copying the URL, and pasting it into a favorite. This URL is fairly short. Just now I tried right clicking on the folder I wanted to make a favorite and copying a shortcut. This URL is much longer (although it should point to the same place as the short one). When I tested the favorites, the first URL loaded a blank screen (as you saw in the ODC), but the second loaded the page correctly. I went back to our System Test environment to make sure that the problem does not exist there (this instance is still 3.0.9.8.2). Both the short URL and the long URL worked. Why should patching the portal cause the short URLs, which worked before, to
stop loading pages correctly? Here is an example:
Portal Production (3.0.9.8.5)---------------------------------------------------------------------------
URLs for My Regional tab
WORKS(right-click and copy shortcut)
http://portal.us.colorcon.com:7777/pls/cc_prod/CC_INTRANET.wwpob_page.changetabs?p_pageid=952&p_regionid=2264&p_portletid=956&p_mainpageid=952&p_mode=3&p_debug=0&p_back_url=http%3A%2F%2Fportal.us.colorcon.com%3A7777%2Fservlet%2Fpage%3F_pageid%3D952%2C956%26_dad%3Dcc_prod%26_schema%3DCC_INTRANET
BREAKS(navigate to page and copy URL)
http://portal.us.colorcon.com:7777/servlet/page?_pageid=952,956&_dad=cc_prod&_schema=CC_INTRANET
URLs for QA Tab under My Knowledge (this is a sub-tab)
WORKS(right-click and copy shortcut)
http://portal.us.colorcon.com:7777/pls/cc_prod/CC_INTRANET.wwpob_page.changetabs?p_pageid=952&p_regionid=2277&p_portletid=997&p_mainpageid=952&p_mode=10&p_debug=0&p_back_url=http%3A%2F%2Fportal.us.colorcon.com%3A7777%2Fservlet%2Fpage%3F_pageid%3D952%2C954%2C960%2C997%26_dad%3Dcc_prod%26_schema%3DCC_INTRANET
BREAKS(navigate to page and copy URL)
http://portal.us.colorcon.com:7777/servlet/page?_pageid=952,954,960,997&_dad=cc_prod&_schema=CC_INTRANET
Portal System Test (3.0.9.8.2)-------------------------------------------------------------------------
URLs for My Regional tab
WORKS(right-click and copy shortcut)
http://hercules.us.colorcon.com:8020/pls/cc_prod/CC_INTRANET.wwpob_page.changetabs?p_pageid=952&p_regionid=2264&p_portletid=956&p_mainpageid=952&p_mode=3&p_debug=0&p_back_url=http%3A%2F%2Fhercules.us.colorcon.com%3A8020%2Fservlet%2Fpage%3F_pageid%3D952%2C956%2C960%2C964%2C48%2C47%2C614%2C50%2C103%2C49%26_dad%3Dcc_prod%26_schema%3DCC_INTRANET
WORKS(navigate to page and copy URL)
http://hercules.us.colorcon.com:8020/servlet/page?_pageid=952,956,962,964,48,47,614,50,103,49,1006,1020,1154,1060&_dad=cc_prod&_schema=CC_INTRANET&2086_IT_EBUS_PROJ_93987.p_subid=83600&2086_IT_EBUS_PROJ_93987.p_sub_siteid=1&2086_IT_EBUS_PROJ_93987.p_edit=0

Hi,
The reason why I decide to use Light Framework, itu2019s because Iu2019m creating an EFP, and Iu2019m using the WPC to publish the content (articles, news, and link list), using the standard Web Forms.
The problem is, after adding to a WPC Page something so simple like an article (using the Web Form Article), no Portal iView, HTMLB or other stuff included, the preview of the WPC Page using the Default Framework Page is ok, but when using the Light Framework Page, the text in the article doesnu2019t have the correct font-family. It looks like there are some styles missing in the Light Framework Page, that WPC content is expecting.
Thanks and Regards,
John

JTable text alignment issues when using JPanel as custom TableCellRenderer

Hi there,
I'm having some difficulty with text alignment/border issues when using a custom TableCellRenderer. I'm using a JPanel with GroupLayout (although I've also tried others like FlowLayout), and I can't seem to get label text within the JPanel to align properly with the other cells in the table. The text inside my 'panel' cell is shifted downward. If I use the code from the DefaultTableCellRenderer to set the border when the cell receives focus, the problem gets worse as the text shifts when the new border is applied to the panel upon cell selection. Here's an SSCCE to demonstrate:
import java.awt.Color;
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.GroupLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.border.Border;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
import sun.swing.DefaultLookup;
public class TableCellPanelTest extends JFrame {
private class PanelRenderer extends JPanel implements TableCellRenderer {
    private JLabel label = new JLabel();
    public PanelRenderer() {
      GroupLayout layout = new GroupLayout(this);
      layout.setHorizontalGroup(layout.createParallelGroup().addComponent(label));
      layout.setVerticalGroup(layout.createParallelGroup().addComponent(label));
      setLayout(layout);
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
      if (isSelected) {
        setBackground(table.getSelectionBackground());
      } else {
        setBackground(table.getBackground());
      // Border section taken from DefaultTableCellRenderer
      if (hasFocus) {
        Border border = null;
        if (isSelected) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusSelectedCellHighlightBorder");
        if (border == null) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusCellHighlightBorder");
        setBorder(border);
        if (!isSelected && table.isCellEditable(row, column)) {
          Color col;
          col = DefaultLookup.getColor(this, ui, "Table.focusCellForeground");
          if (col != null) {
            super.setForeground(col);
          col = DefaultLookup.getColor(this, ui, "Table.focusCellBackground");
          if (col != null) {
            super.setBackground(col);
      } else {
        setBorder(null /*getNoFocusBorder()*/);
      // Set up our label
      label.setText(value.toString());
      label.setFont(table.getFont());
      return this;
public TableCellPanelTest() {
    JTable table = new JTable(new Integer[][]{{1, 2, 3}, {4, 5, 6}}, new String[]{"A", "B", "C"});
    // set up a custom renderer on the first column
    TableColumn firstColumn = table.getColumnModel().getColumn(0);
    firstColumn.setCellRenderer(new PanelRenderer());
    getContentPane().add(table);
    pack();
public static void main(String[] args) {
    EventQueue.invokeLater(new Runnable() {
      public void run() {
        new TableCellPanelTest().setVisible(true);
}There are basically two problems:
1) When first run, the text in the custom renderer column is shifted downward slightly.
2) Once a cell in the column is selected, it shifts down even farther.
I'd really appreciate any help in figuring out what's up!
Thanks!

1) LayoutManagers need to take the border into account so the label is placed at (1,1) while labels just start at (0,0) of the cell rect. Also the layout manager tend not to shrink component below their minimum size. Setting the labels minimum size to (0,0) seems to get the same effect in your example. Doing the same for maximum size helps if you set the row height for the JTable larger. Easier might be to use BorderLayout which ignores min/max for center (and min/max height for west/east, etc).
2) DefaultTableCellRenderer uses a 1px border if the UI no focus border is null, you don't.
3) Include a setDefaultCloseOperation is a SSCCE please. I think I've got a hunderd test programs running now :P.

Iview contents missing when using FQDN Cisco Load Balancer

Hello Experts,
We are using Cisco load balancer to distribute the load across the portal servers. Everything was working fine, but after upgrades to the latest support package stack SP18, we ran into some odd behavior. Some of the contents on the iview are blank when using FQDN load balancer URL e.g. http://sap1234.corp.com/irj/portal . But those blank contents does show up if we donu2019t use FQDN e.g. http://sap1234./irj/portal . At this point we are not sure where to start troubleshooting?
Any helps would be appreciated,
Dave
Edited by: davidn on Feb 27, 2009 11:50 AM

Isn't this the same as your other post? I'm locking this one...

How do I fix the sound quality when using my IPhone 4s Streaming Bluetooth via UConnect to Media Center 430 RBZ in my 2011 Dodge Ram?

I'm using an iPhone 4s.....When I stream Bluetooth audio via UConnect to Media Center 430 RBZ, the quality is pretty bad. I've been looking at a million different websites in hope for an answer, but have not found any luck.
Does anyone have a solution to my problem?
Does anyone know if this a problem with the phone or my stereo?
Thanks for the help!
Nick

I think it is also done by edwardquan:/discussions/board/message?board.id=smartphones&message.id=52200&query.id=227350#M52200
Two reviews two thumbs up!!!!

First words are lost when using Bluetooth voice de...

This happens with any Nokia Nxx or Exx when used with bluetooth HF device, like Nokia HF-300. Is there any solution to this problem? In practice you can hardly use any navigation with bluetooth voice. The delay itself is not a problem but the phone should wait 0.x seconds after opening the line to the HF device. It would be nice if you could configure this kind of delay to the phone.

Is this the case when listening to the radio or music from the phone?
I'd expect it to pick everything up when listening to music from the phone as it's on the same channel (A2DP).
But if you're getting all the nav guidance with a radio mute then that is a huge step forward.
Usually the problem occurs when there is a delay for the mute of the radio followed by the streaming over mono channel.
Message Edited by confiture on 18-May-2009 08:56 PM

Text content lost when using attachments. iPhone 4 (iOS 5.1.1)

Similar Messages

Maybe you are looking for