Text Copied from S.O - Delivery; Un Editable

Hi,
Is there any way that we can make the text that is copied from.. lets say for eg: from Sales Order -> Outbound Delivery as uneditable. The person creating the delivery should only be able to display it. Is this the way standard SAP behaves, if not how can i take care of this problem ?
Thank You,
Suresh

Does anybody have any suggestions on this ??

Similar Messages

  • Text Copied from Illustrator CC 2014.1.0 Pastes as Image

    I have seen similar discussions but none of the answers are of any help to me as of today.
    Background:
    I am running OS X Yosemite 10.10
    All my CC apps are up to date as of (11/1/14)
    I am also up to date on all other software on my Mac
    My goal:
    Copy text from illustrator
    Paste in Mail, TextEdit, and Notes as live editable text
    Results:
    Text pastes as pdf or some type of an image depending on the app
    What it looks like:
    I'll start from the beginning to avoid some questions later.
    I open a new document in Illustrator.
    These are the clipboard settings in my preferences.
    Please Note - I have tried every combination of these settings. Turning them on and off one at a time and in combination does nothing to change the end product. I have turned them all off for this example, so as to not muddy the waters.
    I type some text. I did not use a text box in this example. I just clicked on the page with the type tool and typed this line. There are no added attributes. You can see the character settings are the most basic. Again, please note - I have tried using a text box with the same result.
    I use the type tool to highlight the text and then copy the text. I did not use the selection tool to select the text and copy.
    This is what the clipboard looks like. Note that the contents is "text".
    If I type text in PS (as an example) and copy to the clipboard it says "text". However, the text I copy out of PS I can paste anywhere as editable text.
    If I type text in Notes and copy to the clipboard it says RTF. This text can also be pasted anywhere as editable text.
    This leads me to believe that this is an Illustrator centric problem I am experiencing.
    I click into the body of an email and paste. Looks fine, but when I try to click into the text (such as between the words "into" and "Mail") I cannot do it.
    The line of words is highlighted and not editable at all.
    If I right click on the image of the line of text and highlight "open attachment" you can see the clipboard pasted in as a .pdf and not editable text.
    Interestingly, if I open a new note and try to paste the line of text, it also pastes as a .pdf but just the icon show up. Double clicking on the icon will open the text as a pdf in acrobat.
    I did not have this issue until CC2014 updates were made. I would like to know if there is something that can be done or is this a bug in Illustrator. If it is a bug I don't want to spend time looking for workarounds. I will use another program when I know there will be a good deal of copy and paste work to be done. It's inconvenient for my older Illustrator files now have this issue when I open them in CC2014.
    I know I can use the "paste and match style" but it's a force of habit to use the shortcut for paste. It's also a ridiculous change to Illustrator for the cut/paste to act this way. If it indeed was planned and not a bug, what would the benefit be?
    If anyone has insight into the problem I am eager to know what's going on.
    Finally, if there is no other way to fix this then can someone remind me how to customize the shortcut key combinations in Mail, Notes and TextEdit? I seem to remember (long ago) being able to customize certain shortcuts in some apps, but I never did it in anything but Adobe apps and even then it was CS5.
    Thanks in advance for any help!

    I ran into this issue today. I wanted to copy text into an email – however I pasted it it stayed uneditable.
    The workaround was to open Text Edit and use the menu item 'paste and match style' (Command+Option+Shift+V) which pastes it as editable text. Then copy and paste that into mail.
    What a pain.
    If I try 'paste and match style' directly in mail from illustrator it pastes as a flipping pdf.
    I'm 10.10.2 yosemite and using Adobe CC

  • Address not copied from Sales order/Delivery to Shipment Document

    Hello Experts,
    I need your help on Addrss of ship to in shipment document.
    Sales Order[VA01] >> Delivery [Vl01N]>> Shipment [VT01N].
    User changed the Address of ship to party (Header level) in Sales Order and It reflected to delivery as well and I believe It should also update the address in Shipment document.
    But when I checked the Address of the Customer/Unloading point in Shipment Document [VT03N] (as below) I found It was not updated It was same as Customer Master Record and I believe It directly copied from Customer Master Record.
    BUT While creating the Shipment system is copying the data from Customer master Record not from Sales Order /Delivery. Logically system should copy the updated address from Order/Delivery BUT It is directly copying from Customer Master i don't know where is the setting of this ??
    Can anybody help me on this ? How system takes the customer (ship to party) address in shipment ? Where are the setting of these.
    What I need to do so system take the updated address from Sales Order/Delivery not from Customer Master Record (Ship to party).
    Can I change the address of customer in shipment document ??
    Awaiting your precious reply.
    Thanks,

    Hello Samir,
    Thanks for your response.
    I think you get my question in wrong way.
    I am sayingCustomer master data was not changed.
    User just changed the Address in Order (Order > Header >> Partner tab >> Change ship to address/overwrite ship to address).
    Overwritten Address / Updated address are copying in Delivery BUT not in Shipment document.
    What I need to do?  system should copy the updated address from Sales Order/Delivery BUT it is copying from Ship to party.
    I hope this time i am clear to explain my issue.
    Thanks,

  • PO Text copy from Sales Order to Purchase Order

    Dear friends,
    Hope everyone is doing fine.
    I have the following business requirement for two situations
    Scenario 1) Purchase Order text from the Sales order has to be copied to the purchase order. Here sales order is converted to purchase requisition, and later the requisition is converted to the purchase Order.
    The standard SAP config is working absolutely fine for this.
    Scenario 2) Purchase Order text from the Sales Order has to be copied ot the purchase order. Here sales order is converted into a planned order, planned order is converted into purchase requisition, and later the requisition is converted to the purchase Order. For this situation, the text is not getting copied from Sales order to the requisition/purchase order.
    This is not working as of now with the configuration for the above scenario 1.
    Please throw some light to solve the scenario 2.
    Please let me know if there is a config or do we need to use any user exit or BADI to achieve this.
    Thanks in advance.
    Regards

    Hi Sam Matt ;
    You can benefit from MM:Define copy rules for PR texts .
    I checked , you can copy from sales order , like a belowed screens.
      Regards.
      M.Ozgur Unal

  • "Item Texts" copying from third-party PR to PO?

    I am creating a third party sales order (item category TAS). Here, I give some 'Material PO text' manually and save the TPO. (Select Item -> Menu Goto > Item > Texts).
    The resulting PR has the same text copied.
    Now, when I convert this PR into PO, the text is NOT getting copied.
    Any idea how can this be done?
    null

    Hi Neetu
    you have to mainatin Item text and not for material PO text...
    Do these settings:
    SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
    then check you should have a entry for "Item Text" if not then
    Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
    please confirm if these settings are already there?
    regrds
    yogesh

  • Text copy from Purchase Order to Inbound Delivery

    Dear All,
    We would like to copy header texts from purchase order to the inbound delivery document.
    I could not found the customizing point copy-rules for theses documents.
    Is this possible and where have we to configure it?
    Thank you.
    Best regards,
    Thomas

    Hi,
    my situation is:
    - a WM managed warehouse, society A;
    - a HU managed warehouse (without WM), society B;
    - a purchasing process of HU from society A towards society B.
    Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
    This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
    "V51VP - item was not found - process cancelled".
    Can you help me to transfer these HU?

  • Item texts copied from purchase order to delivery

    Hi Sales Gurus,
    I am facing the following issue.
    In the intercompany process we create the delivery based on purchased order.
    Our need is to copy the item texts of the purchase order to the item texts of the delivery.
    How can i do that?
    Thank you
    João Fernandes

    João,
    Transaction VOTXN, Delivery, Item.
    Then assign a specific text procedure and Access Sequence with the appropriate text ids.
    Regards,
    (Boa tarde)
    Sérgio

  • Text copy from customer master to Sales order and invoice

    Dear friends,
    when i maintain the text in the customer master ther needs to copy to sales order and from sales order to invoice.
    Can you please guide me how to do this config
    Thanks
    Raju.

    Dear Raju,
    First you need to do the Text determination for all areas(i.e Customer Sales and distribution,Sales order header,delivery header and billing header) through VOTXN transaction.
    -->Create the Customer text ID under Object KNVV
    Maintain the text for Text ID in the customer master >sales area data>Extras-> Text
    To copy the customer text to the sales order you need to keep KNVV table as Text object in the sales order text access sequence for the text ID.
    If you want to copy the sales order header text to the invoice header first you need to copy the sales order header text to the delivery header from delivery you can copy to invoice.
    When you want to copy the Text from Sales order to delivery the Access sequence will place a role
    If you want to copy the sales order text to the delivery document The Text Object should be VBBK in the delivery Header Text determination access sequence for that Text ID
    Again you can copy the text from delivery to Billing document through checking the Delivery Text field in the billing document detail screen (Top most bottom of the screen).
    Go to VOFA transaction select your billing document type then go in to the details here you can find the Delivery Text field you just check that check box.
    Now system will copy the sales order header text to the delivery header then it will copy to the invoice header.
    I hope this will help you,
    Regards,
    Murali.

  • Text  flow from order to delivery & to invoice

    The text enterd in to the Sales order needs to be copied in to Delivery & then Invoice.  What is the necessary customising stting. And also can i use this text matter in the Invoice printing. If it is yes then how?
    Thanks in advance
    Vinod

    You can this via the copy control functionality if i am not wrong.
    SPRO-SD-billing-maintain copy control for billing documents
    there you can choose which data you want to transfer from ie delivery to invoice etc...
    It is not that difficult
    Please reward if helpful
    kr
    hakan

  • Text copied from PDF broken to one-word paragraphs

    I have MBP with 10.8.3 and CS5 Acrobat Pro 10.1.7. Whenever I copy&paste text from a PDF created in MS Word 2008 12.0.0. and paste it in InDesign or Mail, there's a line break after every word. Also, when I copy&paste text from a PDF that was created with ID 5.5, the text appears line-broken as per the layout - not as continuous block of copy as it should. The only way I know to get rid of this is to do find/replace in ID (find para marker and replace with space). Is there any fix for this? Thanks!

    You may be hoping for too much. The PDF doesn't know about your text flow, there is nothing in a PDF to distinguish a hard and soft return, and there is no clue what is a paragraph or not. (Well sometimes if it is tagged, but it usually isn't).
    So Acrobat has no way at all to know what is a continuous block of copy and what is a list of points.
    Bottom line: PDF is a lousy way to deliver text for reuse.

  • PS Texts Copy from Project to Project

    Hi Gurus,
    I need to store some info in the PS Text and want to copy the PS Text from a Project to other Projects.
    I have to do it through a Functional Module....
    Let me know what are the FM which i can use..
    Thanks in advance.
    Regards

    Thanks for your reply,
    I know about the export function, but just a week ago I could copy and paste without loss of quality. This has changed.
    (You have to open the screenshot to see what I mean)
    Thanks for your help.

  • Header text copy from quotation to sales order

    Dear all,
    My Client Requirement is like this if i entered some text in Quotation header text the same should be copied into sales order hearder text , i tried a lot i am unable to find the answer
    kindly guide me.
    With Regards
    san rao

    Hi San Rao
    If the Quotation header text has to be copied into the sales order then while configuring text determination , make sure that you are Configuring sales document at header level two times and .First time you configure for quotation and second time you do for sales order and while doing for sales order you assign a sales order and assign a the text id that has been used for quotation .then your problem will be solved
    Regards
    Srinath

  • Text copied from firefox does not paste right, not a problem using IE or Chrome

    Using firefox 35.0 on windows 7 64 bit, copying "vtamlst1" (first large gray area) on http://www.kicksfortso.com/User%27s%20Guide%201.5.0/KooKbooK/08/index.htm, then pasting into notepad, spacing all wrong. looks like most spaces dropped.
    Same problem observed with fc21, pasting into gedit.
    Same procedure works fine on all other browsers I've tried (especially ie and chrome).

    //VTAMLST1
    [http://stackoverflow.com/questions/3475790/copy-notepad-text-with-formatting]

  • Shipping instructions not copying correctly from sto to delivery

    hi ,
    i am facing issue like shipping instructions from STO header are not getting copied correctly to delivery , what may be the problem , please help.
    regards,
    veeru.

    how is the text copied from STO to delivery in your system?
    there are a some alternative options, which need to be implemented before a text copies from STO to a delivery.
    However, if it is not an error in a routine developed by an ABAPer (reading text from the wrong STO), then a text certainly does not exchange its content when getting copied.
    Maybe you should check whether the text is maintained in the customer master and does default from there instead of coming from the STO.

  • Shipping instructions  not  cpoying  correctly  from  sto  to  delivery

    hi ,
    i  am  facing  issue  like  shipping  instructions  from  STO  header  are  not  getting  copied  correctly   to  delivery  , what  may  be  the  problem  , please  help.
    regards,
    veeru.
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Dec 9, 2011 4:19 PM

    how is the text copied from STO to delivery in your system?
    there are a some alternative options, which need to be implemented before a text copies from STO to a delivery.
    However, if it is not an error in a routine developed by an ABAPer (reading text from the wrong STO), then a text certainly does not exchange its content when getting copied.
    Maybe you should check whether the text is maintained in the customer master and does default from there instead of coming from the STO.

Maybe you are looking for