Text determn

HI,
i enter text in so -header say terms of payment 10days
did delivery - terms of payment 10days copied from order
then did billing - terms of payment 10days copied
saved billing.
now i went to delivery changed terms of payment to 50 days -but still terms of payment in billing is showing as 10 days instead of 50 days as in delivery.
Pl suggest what setiing must be done for this

Hi chandra ,
i have 1 more doubt
SO -text ABC
DELIVERY -text after changing XYZ
BILLING -XYZ (How text from delivery is geting copied though it has no text object)
in text determn -for billing header text object is VBBK Sales Header texts (SALES ORDER)
-BUT HOW STILL SYSTEM COPIES TEXT FROM DELIVERY LEVEL THOUGH FOR DELIVERY
Header- there is no text object.
Pl suggest

Similar Messages

TEXDT DETERMN

HI,
I want to copy the text entered in mat master basic data 1 tab/Additional data tab text -to sales order
1how to do this & which text object i need to use
2 Pl tel me how to find different text object

HI william,
Thx for replyin
in text determn -for billing header text object is VBBK Sales Header texts (SALES ORDER)
-BUT HOW STILL SYSTEM COPIES TEXT FROM DELIVERY LEVEL THOUGH FOR DELIVERY
Header- there is no text object.
Pl suggest

Source directory (xyz. text) file needsto be placed inthe Target directory

Hi Experts,
There is a file in the source directory (xyz. text) and I need to place the same file in the
Target Directory (xyz. text) without any message transformation. How to get it using XI?
Points will be awarded ...........
Thanks,
Manoj

Hi Manoj,
You can do it without touching IR. you just need to configure the scenario in ID.
you need to do the following:
1. Create service, and two File Communication channels.
2. reciver determnation, put that service and any interfcae and namespace.
3. Interface Determination: Put Inbound Interface SAME AS you specified in Receiver Determination.
After all this you can test your scenario.

Text options

Hi all,
i had a question regarding when writing something with the text option in photoshop, you then have the option of making it smooth, strong, sharp, crisp.
What do these options do to the text? i cant really notice the difference, is there a recommended option for print or web that i should be using?

Depends on a number of factors:
how you want the type to look
resolution
file format (eg: gif or jpeg)
Font attributes: weight, serif thickness, webfont
so the answer would be very long. But thismakes an important differecne for low resoltuon digital graphics, and not so much for print.
None - Applies no anti-aliasing
Sharp - Type appears at its sharpest
Crisp - Type appears somewhat sharp
Strong - Type appears heavier
Smooth - Type appears smoother

How Open And Print Proc C Genrated Text File Based Report ON Browser

Dear Sir
I have my old 6i forms from which i runs some Pro*c programmers with the help of HOST() command ,and then that generates a normal text file as a resultant report like file name "kha10"
which i can easily open with any text client ,,,
now what i want is that, to open this file on browser like web Report on my forms 10g like report builder 10g
can anyone help me as it will be a gr8 help otherwise i would have to develop approx 100 reports.....
any solution or any technique plzz help me

bro my work is almost done apart from this virtual directory , how to make a virtual directory so that is dosent comes under
http://........../form/
i mean where to put my
<virtual-directory virtual-path="/procrepo" real-path="c:\" />
as my original file looks like bellow
<?xml version="1.0"?>
<!DOCTYPE orion-web-app PUBLIC "-//ORACLE//DTD OC4J Web Application 9.04//EN" "http://xmlns.oracle.com/ias/dtds/orion-web-9_04.dtd">
<orion-web-app
     deployment-version="10.1.2.0.2"
     jsp-cache-directory="./persistence"
     temporary-directory="./temp"
     servlet-webdir="/servlet/"
>
<context-param-mapping name="configFileName">D:\DevSuiteHome_1/forms/server/formsweb.cfg</context-param-mapping>
     <virtual-directory virtual-path="/html" real-path="D:\DevSuiteHome_1/tools/web/html" />
     <virtual-directory virtual-path="/java" real-path="D:\DevSuiteHome_1/forms/java" />
     <virtual-directory virtual-path="/webutil" real-path="D:\DevSuiteHome_1/forms/webutil" />
     <virtual-directory virtual-path="/jinitiator" real-path="D:\DevSuiteHome_1/jinit" />
     <session-tracking cookies="disabled" />

<security-role-mapping name="administrators">
</security-role-mapping>
</orion-web-app>
plzzzzzzzzzzz help

Automatic PO creation of free text PR

Hi!
We have all our PRs in free text since we are not yet using material master. One of our purchase organization will only order from one vendor and they will enter that vendor and price in the PR. Is it possible to create a PO automatically from that PR without a material or source list?
Sincerely
Anders

Hi
Thank you very much. Is it possible to restrict the automatic creation to a certain purchase organization?
If I understand you right:
1) Create PR with item category D Service
2) Activate automatic PO creation in ML91
That will create POs for all PRs created as a service?
Sincerely
Anders

IF Condition in RTF Help text

Hi,
I have RTF template which contains the field to display the column name. Below are my help text.
COLUMN1 is my XML tag and displaying AQUA color in my excel output.
<?COLUMN1?><xsl:attribute xdofo:ctx="block" name="background-color">Aqua</xsl:attribute>From above scenario, i need to add one more condition if there is no value in my XML tag then don't display the field in my excel output. For example. I have COLUMN1 and COLUMN2 XML Tag. Only COLUMN1 contains the value but COLUMN2 not. In my excel output the COLUMN2 value should not display.
Thanks

Please see if (How to make condition using XML tags to check NULL values in XML Publisher templates? [ID 414022.1]) helps.
Also, see XML Publisher Guide which can be accessed via http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

Text value is not getting displayed in Query designer !!

Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Which is best app to convert voice memos to text?

There must be a way to import iPhone 5s voice memos, some 20 minutes long into editable text. Recommendations would be appreciated.

SORRY! WHAT I MEANT TO ASK WAS "I WANT TO EXPORT YOUTUBE & FACEBOOK VIDEOS TO ITUNES. WHAT IS THE BEST APP. TO USE TO CONVERT THESE VIDEOS INTO A FORMAT THAT IS ACCEPTABLE TO ITUNES. WHAT IS THE BEST FORMAT TO USE. THANK YOU

Receiving null and [Receiving text] SMS

Hi,
Strange things on some SMS: I receive one correctly but a the end there is the text "[Receiving text]"
Then I receive a second SMS only containing null
Why is that ?
Thanks.

You coded:
if (line == null)
eof = true;
else
do something else;
// then, regardless of the above,
st1 = new StringTokenizer(line,","); // line is still null here
So there's the problem.

On Android 4.2.2 on a Nexus7 tablet - No Firefox button and most text entry fields do not work at all

I installed Firefox 19.0.2 and appears to be ok, but I don't see a Firefox button anywhere, so I cannot access any of the functions that it controls, such as bookmarks, which is why I installed it!
The ASUS Nexus 7 tablet shows up as a supported platform.
I set it as the default link browser, but quickly realized that I could not enter text into any data entry fields, so I reset the default back to Chrome, which works fine for that.
I installed Firefox because bookmarks in Chrome are very lame, but I can't use bookmarks at all in Firefox, so again Chrome wins.
Any suggestions, before I uninstall it?

I am now a Democrat supporter. dccc.org does accept text input from my mobile.
The forum problem I mentioned earlier is apparently a known issue but only affecting legacy phones.

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

How to provide text formatting options to user from a text field

Hi,
My requirement is - in the interactive form, a comments field needs to be provided where user should be able to enter text with formatting options like
Headers
indentations
bold/italic
bullet points and numbers
Once user enters the formatted texts in a text field, data needs to be displayed/printed in the same format. Could you help me on how to provide these formatting options to the user for a particular text field?
I understand that once I define the text field with format XHTML (with RTF), user formatting can be captured and displayed in the same way. But I am not sure on how to provide the formatting options for the text field.
Thank you,
Madhu

Hi,
if you select a text field for Rich Text and the press Ctrl + E you'll get a bar for all available text formatting options in Acrobat/Reader.

Text Wrap Options have Disappeared ID CS4

All the icons in my Text Wrap window have disappeared. The tab/pallet is still there, but empty. The pop out still lists “Show Options” and “Apply to Master Page Only” are still there, but grayed out. Thanks in advance for any help!!

Yipee.
Should have remembered that one.
Thanks for the help!
wally
= = = = = = = = = = = = = =
Wally Flick
Director Creative Services
[email protected]
314-854-0718 (voice)
847-953-0774 (fax)
Designer's Corner
Designer's Blog
www.aon.com
BobLevine <[email protected]>
02/01/2010 04:55 PM
Please respond to
[email protected]
To
Walter Flick <[email protected]>
cc
Subject
Text Wrap Options have Disappeared ID CS4
http://forums.adobe.com/thread/526990
Bob

Text Wrap options not showing in InDesign CS3

Using InDesign CS3 on a Mac 10.4. I've had this problem for a couple of months now and it's getting past the point of annoying. When I open my text wrap options pallete it's blank even when I expand options. I can see the text wrap icons in my header panel, but I no longer have options to change the right/left/top/bottom margins. Just a general "add wrap" and "remove wrap". Is there any way I can get my pallete back? I've tried defaulting my tools, but still it does not show up. I don't know what to do to get it back.

Did you try resetting preferences? While pressing Shift+Option+Command+Control, start InDesign. Click Yes when asked if you want to delete preference files. If you don't get the message about deleting preferences, you weren't fast enough.
http://livedocs.adobe.com/en_US/InDesign/5.0/help.html?content=WSa285fff53dea4f86173837510 01ea8cb3f-6d1e.html
Ken

Text determn

Similar Messages

Maybe you are looking for