Text disappears to the right and below inserted html, any ideas?
When I insert html into the page, the text I have to the right and below disappear from the page. If I move the html below both sets of text everything appears fine. Any ideas?
Hello,
Could you please provide me the link to your website (if you have uploaded it).
Else could you please paste the html code (that you are placing on the page) here so that we can have a look at it.
Regards,
Sachin
Similar Messages
-
I cannot see my itunes library on the main menu under computers despite the network being active and the home sharing on on both the devices the mac and apple tv. Any ideas?
Hi Monty,
Sorry to say it, but this is normal for Apple TVs. I've owned a TV2 and a TV3, and neither lasted for an entire year. They are quite fragile and of low quality, and as you can see here, quite fussy even when they work. The wi-fi receiver on these are cheap and unreliable.
Consider the $99 an annual rental fee. They rarely work for a whole year, so if you are going to use the platform, you will have to replace them constantly.
Also, when one dies under warranty, never, never send it to Apple for repair. Go to the Apple Store for replacement. I sent my ATV3 in for warranty repair using a box sent to me by Apple, and although FedEx tracking showed it was accepted by Apple, it was never seen again. Apple won't replace it or even return my calls. -
My iPad screen is blank except for the service and battery symbol. Any ideas how I can fix this?
My Ipad screen is blank except for the service and battery symbols. Any ideas how I can fix this please?
Try restarting
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost). -
I recently purchased a 7th Gen iPod nano which I have downloaded my music to. However, when I try to play this it is showing on the iPod as play but I am getting no sound through. I have checked the headphones and reset it. Any ideas?
Haha I had the exact same problem. Once I had tried it like 4 different pairs of headphones i was ready to give my iPod back. Then I tried pushing the headphones in further and proceeded to kick myself. I seems a lot of people have the same problem, post it on here and realise a few minutes later.
-
I know click hold on and off then hold the menu and center button until the apple logo appears. I have tried this so many times and my iPod Classic is still unresponsive! I've tried plugging my iPod into my Mac, my wall charger, my ihome, everything, but nothing works. It won't connect to iTunes to restore or anything. I've tried leaving it unplugged long enough to let the battery die and then tried plugging it in, a method I've utilized successfully with other iPods but that didn't work either. I really just starting to lose faith in the quality of this product. The first classic I bought didn't work at all and I had to exchange it. This one I bought to replace my 5 year old nano and it hasn't even lasted 7 months! Somebody please offer me a solution and assure me that I didn't waste $250 on a crap piece of technology. I'm desperate!
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
Help!
Hello Mikeytsmith
Check out the article below for troubleshooting the issue of activating FaceTime for Mac.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I've plugged in my MacBook with multiple chargers and batteries and every time the charger light illuminates green although the battery is currently dead, and wont turn on still. My guess is that the port the charger actually plugs into is broken though i've heard this probblem is caused by the motheboard being fried, does anyone have an idea on how I can fix this? - Thanks
We can't help you, for that problem you will just have to take it in for a free evaluation.
Good Luck -
I do have MX in tcp_local in imta.cnf
The problem is not in the mail software, the problem is in your DNS system. 554 is a permenant failure which means that the MTA got an authoritative response from DNS reporting that the host/domain did not exist.
When the user tries again, the MTA queries again, and this time DNS responds with a positive response.
First see the NMS tuning guide and enable nscd, it might be related, not sure, can't hurt, will improve performance.
Your DNS server should be waiting until it gets a positive/negative response from the root servers. Sounds like that is not happening, maybe a timeout kicking in and causing it to return a authoritative answer (which is incorrect) and then on a subsequent query the response made it and thus the lookup works. -
HT201317 My shared photostream keeps deleting all the photos and shows empty. Any ideas why ?
I've shared a photo folder on my Ipad which I use to send or share photos with other family members on a different apple account. Twice in the last week it has emptied the folder of its photos and left an empty folder. Can anyone offer advice on how to stop this ?
Try to follow steps in that article, usually shared photostreams do not have exparation, so it sounds like you didn't actually share one.
iCloud: Using and troubleshooting Shared Photo Streams -
Lost my iPhone and disabled it via find my iPhone app, recently recovered the lost phone and the screen says disabled try again in 22987708 minutes! How do I re activate phone?
Force it to recovery mode and restore it using iTunes.
Use iTunes to restore your iOS device to factory settings
support.apple.com/kb/ht1414
Make sure you know your Apple ID password.
CHEERS ! -
If anyone can help me, that would be hugely appreciated!
I have the same issue now after downgrading my Flash plugin. I downgraded from 10 to 9 latest because I like using Camino and for some reason Flash 10 doesn't play nice with Camino. But all of a sudden as I use Camino 2b2 for everyday and Safari 3.2 for banking and such, the browser hangs requiring a forced quit when I close it. I've re-installed the browser twice now with all the previous folders, and preferences erased and caches emptied. I even when to re-installing 10.5.6 and it still crashes, it's odd. Maybe 10.5.7 will address this.
-
In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?
Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
Have you tried quitting Pages completely and the restart the iPad?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!
Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.
-
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
Why are some text missing from the right side of a page I send to my printer? Thanks
Why is some of the text missing on the right side of a page I send to my printer?
I came across something similar recently where it printed the left hand side only!
If I want to print an email, instead of File > Print ( does not print properly ) I click on the print icon on my email webpage ( do not use applemail and access gmail direct) which then takes me to print preview showing the complete email which prints ok.
Some webpages ( File>Print) do not print properly and some do. Those that do not generally have their own printer icon (path) that needs to be clicked on.
Maybe something to do with encryption but don't know.
Hope this helps in some way.
Maybe you are looking for
-
HELP needed with LG monitor working
I was given a 22" LG external monitor to use with my MacBook Pro. Once I got a minidisplay port to VGA adapter, it worked, but only as a mirror. I could not get it to act as a separate monitor to move programs and the cursor between. For dual display
-
Good afternoon! We purchased the product Adobe master collection 5.5 AOO Litsense RU. Distribyutiv program has been lost, and now we can not find it on the site. There we find different versions of the program other than Russian. Please tell me where
-
hi to all, i need a help in scripts, how to copy script form between two servers. Thanks& Regards Kranthi Revuri
-
Token - $CURRENT_DATE$ - Not Working
I want to supply a default value (Current Date) for a attribute named MyDate. Java Type = Date and Display Type = dateField. Within the Application Definition Editor - Item - Default Display Value Properties section - it states "To get the current da
-
GoLive 7s Code Generation in GoLive 9??
I use golive, but I also do lots of hand coding of CSS, HTML, and lots and lots of PHP/MYSQL. I very much prefer the code GoLive 7 generates compared to the code GoLive 8 or 9 generates. The way the CSS is generated is horrible. And I still prefer so