Text disappears when editing a layer in Dreamweaver 8

I have had a problem for a long time now with text
disappearing while I'm editing it in a layer. If I scroll up to the
top of the page and down again (sometimes a couple of times), the
text will reappear, but this is cumbersome (and rather annoying).
Does anyone else have this problem? Is it something I'm doing
incorrectly? Any help anyone can offer would be greatly
appreciated.

Do you still have this problem when you
select that layer in the layers panel?
"paskiggy" <[email protected]> wrote in
message
news:essc0f$o5a$[email protected]..
>I have had a problem for a long time now with text
disappearing while I'm
> editing it in a layer. If I scroll up to the top of the
page and down
> again
> (sometimes a couple of times), the text will reappear,
but this is
> cumbersome
> (and rather annoying). Does anyone else have this
problem? Is it
> something
> I'm doing incorrectly? Any help anyone can offer would
be greatly
> appreciated.
>

Similar Messages

Text Disappears when on top of an HTML overlay

Text Disappears when on top of an HTML overlay. This is a very simple file. It's not even part of an MSO. The text is disappearing when I view in both the desktop content viewer and the iPad.
I've tried converting to outlines, doubling the layer, copying and pasting back into. Nothing. Any suggestions

You might also try creating the html and leaving a space for you existing text. Select transparent background for you overlay and the text should be visible.

How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.

As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

Why does added text disappear when I move the cursor

After adding text to an unprotected .pdf file the text disappears when I move the cursor and want to add a second box of text. The text in the first box reappears when I double click on the space where the box was. How do I set the text so that it remains visible and printable?

Hi,
I think the data in the PDF file was filled-in using MAC preview.
One option is to ask the user to fill the file again using Adobe Reader or Acrobat.
Or else refer to following link:
http://acrobatusers.com/actions-exchange/pdf2fdf_auto-save
Regards,
Anoop

Text disappears when updating story

When the designer updated a few Incopy stories in the Indesign file, the text disappeared. Anyone seen this before?

Text disappearing when you update a TOC is usually a symtom of havint put the TOC in the main story thread. The TOC must be in a separate story, not thread to anything else, becasue updating replaces the entire story.

Text "disappears" when using text box tool

We are running Adobe Acrobat Standard vers. 7.0.9 inside Thomson Corporation's GoFileRoom vers. 6.0. When using the text box tool to add comments to a pdf, the text within the text box "takes on" the color of the background of the box, making it seem that the text has disappeared. The only way to see the text is to edit the text box and change the font color OR to view the contents of the text box in the Comments section. How do I resolve this? Would appreciate any help.

I am having the same problem. Both with text boxes and text in the actual document. Do you think it is GoFileRoom related? I never made the connection but I wouldn't be surprised. It seems worse when different versions of Adobe are used. Some have ver 7 and other ver 8 but we are all using GFR.
Have you had any help?

Why does my text disappear when I apply an effect to it?

Recently, whenever I try applying an effect to my text layer(s), the text completely disappears from the layer and therefore is not showing up when I preview my composition. How do I stop this? I'm using CS5.5 if that helps.

Just the text in my text layer is what's disappearing. I import my image file, drag it onto the board and then click to add a text layer. I type out my text and then go into the effects & presets, select Animation Presets --> Text --> Animate In -->,Straight In MultiLine, drag the effect into the text layer and then my text disappears, as shown in the second image below ...This just recently started happening to me and I don't know how to get it back. I'm using After Effects CS5.5. I'm very new at this programs so I apologize for not being able to provide a ton of info...

Dynamic text disappears when clicking bold button.

Dear friends,
I have dynamic text inside a movieclip, that I can make it rotate.
the dynamic text properties are : anti-alias for anmations and I emdedded all characters.
When I click on the bold button the the text disappears.
bold_btn.addEventListener(MouseEvent.Click, on_bold);
function on_bold(e:MouseEvent):void
     var my_format:TextFormat = new TextFormat();
     my_format.bold = true;
     my_mc.my_txt.setTextFormat(my_format);
How can I solve this problem.

the easiest (and not very elegant way) is to add textfields that contain those fonts (and embed them). you can remove your textfields from the display list or otherwise, make them not visible on-stage.

Why the Text disappears when I rotate it using Free Transform Tool?

Hi,
My Text is visible before rotating it to verticle position using Free Transform Tool. But when once it is rotated to verticle position the text disappears from the Stage. And it is not an animated Text as well? What is the problem?
Thanks.

If the textfield is manually placed on the stage, you should be able to select the textfield and click the button for Embedding that is in the Properties panel.

Text disappears when graphics frame is placed on top of it.

Hello,
When I try to substitute a large cap in a text frame with a graphics frame in ID CS4, the text disappears.
I have been able to do this successfully in the past, but not with this particular text frame.
Please see screenshots.
Can someone please help?
Thanks for your consideration,
cobaltgreen

That can't be the whole story. The image you posted indicates that if text wrap is applied, the offset is 0 (if it was anything else it would show when the frame is selected, as it is in the screen shot).
Normally you'd actually do this with text wrap and it would push the text to the right (and re-wrap the lines) in the first few lines when the image frame was put into position, but you've done something else we can't see to make that notch.
Peter

When using Typewriter tool, text disappears when I click out of box...

Hi!
I'm sure I've seen this question addressed here before but I cannot make the "Search" work. Every time I search I get "no results" even when I search for something as obvious as PDF.
So please forgive me posting a question that I'm pretty sure has been answered in the past...
When I use the Typewriter tool to type some text, and then I click out of the text box that the Typewriter tool created, the text that I typed disappears. If I double-click on the typewriter text box then the text reappears. Then if I click out, the text disappears. And so on...
How do I make that text stay "viewable" even when I click out of the typewriter text box?
Thank you so much!!
Diane

Hi Larry!!
Here is an image where the box with the Typewriter text (the word "test) is "activated", with the comments list showing down below but without the "test" comment in the comment list being highlighted. At the green "plus sign arrow" in the upper-right corner is the word "test".
Now below is an image where the box with the Typewriter text (the word "test") is not "activated" (but you can see the blue box where the word "test" should be showing), with the comments list showing down below, with the "test" comment highlighted, and the "Comments" dropdown menu so that you can see what's black in the dropdown menu.
When I clicked on the "test" comment in the comment list, the word "test" went away in the upper-right corner and the blue box showed up instead.
Am I showing what you need to see or should I show something different?
Thank again so much!!
Diane

How come my text disappears when I choose a new theme?

I'm new to keynote and I've imported a powerpoint presentation and I want to change the theme. When I do this, my text disappears. Can anyone help?

sometimes this can appear to happen if the text is in a "body" box but the master slide doesn't have the body box turned on by default.
Once your text goes missing, click on the slide inspector and then on the Appearance tab. See if the title or body are turned off, and check them to turn them back on.
Also, when you choose the new theme, use the theme choose, don't just pick a theme from the list, and when the chooser comes up, UNCHECK the retain changes to theme defaults. This should force your ppt into the new theme more correctly.
If your text is still missing, then there's something else going on here.

Type cursor disappearing when editting code

Hello all,
i am encountering a problem where the typing cursor disappears when im editting my code. This really is ennoying and bothers the heck out of me.
Especially when im navigating trough the code using the arrow keys - i simply can't see where i'm at in the code.
Right now i am very disapointed because it has taken me months pondering, whether or not to sign up for Creative Cloud (Student membership).
Now that i finally singed for a year's commitment, i see the code editor is virtually unusable because of the cursor-in-hiding....
Hopefully this issue will be fixed sooner than later or i will have to cancel my subscription and deny Adobe from charging my credit card for the monthly fee :-(
Has anyone else been undergoing the same problem, and maybe fixed it?
Gr.
Niels

That is a known issue to Adobe. Apparently, it's a defect caused by the new code highlighting behavior. You can submit an official bug report here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Type disappears when editing in InDesign CC

When selecting type -- either placing the cursor in a text frame or double-/triple-clicking to select a word or line of text -- the selected text is momentarily invisible. Deselecting all makes it reappear, as does zooming in or out. However, it is difficult to edit text when you can't see it. This problem occurs randomly. I updated from CS5.5 about two weeks ago, and am running OS X Mavericks on a Mac Pro with 32 GB of memory.

In the last few days I've encountered the same disappearing type issue. Editing is now very complicated. Placing the cursor into the text box will make the line that the cursor is in disappear, then I blindly type my change, and as I begin to type, ALL the text in the text box disappears. To see the text box again, I figured out that when I scroll down the page and the "empty" block disappears at the top of my work window, I can scroll back down and the text reappears in the text box. This is most inconvenient when I have my client on the phone rapidly giving me corrections.
I'm running Maverick 10.9.2 and InDesign CC 9.2.1

How To Make Text Disappear When Mouse is On a Button?

Hello, I'm completely new to Flash and well I need some help. I created a page that has static text in the center.
The page has buttons on side and when I rollover a button text appears, but the problem is that when I rollover a button, the static text in the center is there and I want to hide it as I can't read anything because the texts are overlapped.
How do I make the text in the center disappear/hide when I rollover a button and how do I make it reappear when the the mouse is off the button?
I hope what I am explaining makes sense.

You can assign onRollOver and onRollOut code to the buttons to make the text dispappear, but you'll need to make the text a movieclip with an instance name that you can use to target it to turn it invisible. In the simple example below, the button has an instance name of "btn" and the text movieclip has an instance name of "text_mc"
btn.onRollOver = function(){
text_mc._visible = false;
btn.onRollOut = function(){
text_mc._visible = true;

Text disappears when editing a layer in Dreamweaver 8

Similar Messages

Maybe you are looking for