Text Display for 0FISCYEAR

Dear Experts,
I want to display TextElement in my Query as Fiscal Year Long Text , and i set the Property as Long Text for the Infoobject
but it is displaying FiscalYearVariant Text and FiscalYear Key when i check Fiscal Year Text/Variable in filters
My Fiscal Year Varnt Text is APR - MAR
When FiscalYear Variable is 2009
then My Fiscal Year Long Text is APR 2009 - MAR 20010
I want to display this Long Text in this Text Element
but it is displaying as APR - MAR 2009
Even Though I selected Display as NoDIsplay in Business Explorer Tab for 0FISCVARNT.
can any one provide me the solution for this please.
Regards
Supraja.K

Hi Supraja,
You need to create a Text variable with customer exit processing type, and in the exit need to write the code to display the Text of that object. I am not good enough in ABAP to provide the code.
Hope this helps.
Veerendra.

Similar Messages

It used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be.

Month Text display for 0CALMONTH

Hi,
Currently in our reports 0CALMONTH - Calendar year/month is
being displayed as 009.2013 or 005.2014.
How can I make it display SEP.2013 or MAY.2014 (instead of
month Number I want to display text).
Thanks

HI,
if you want maintain like that SEP.2013 or MAY.2014 maintain the master data like that - 009.2013 - SEP 2013.
it is not possible to display alphabet and year you should maintain the specific master data.
in BEx designer select the 0CALMONTH - go to display tab -> select display as text.
Thanks,
Phani.

Posting Period text display

Hi Gurus,
I have a report where i have my GL account hierarchy on my rows and my key figure in column. i have posting period on top of my key figure and my client wants to display the report as
jan, feb, mar etc till dec. the problem is when i run it through posting period it shows me 1, 2, 3 ...12 instead of text.
my key figure is populating value based on user exit and i cannot use other time fields like fiscal year/period. i cannot create 12 restricted key figures as my key figure is getting value from exit variable.
how do i change the text display for 1,2,3 .....12 to jan, feb, mar....dec. is there any sap exit text variable?
please help
thanks
surya

i cannot create 12 restricted key figures as my key figure is getting value from exit variable.
why cannot u create restricted key figures ?
i didnot understand this....
second question - are u maintaining texts of 0FISCPER3
if yes then enter RSD1
enter 0FISCPER3
edit it
go to business explorer tab
over there display as text only and not key
this way it iwll display just text
if u rnot maintaitng texts for it
u have refer above solutions as mentioned by xperts so that u can load texts for 0FISCPER3
then follow the busines explorer tab changes i suggested...
if u can create restricted key figure ur problem will solve easily..

Header Vendor text is not getting displayed for PO in BBP_PD transaction.

Hi Experts,
We are upgrading SRM 3.0 to SRM 7.0 .In the upgraded sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs the Header text field is populated correctly.
Inputs on this will be very helpful.
Regards,
Ravi.K

Ravi,
Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
SG

Text caption set up to display for all of slide

hello
i'm using captivate 5 and have another query.
is there a way to automatically set up text captions to display for the whole slide not a specific time? I know how to set this, but to go through and do this for every text caption is proving to be very time consuming.
look forward to hearing from you.

The Timing accordion of the Text caption could allow you to apply the setting 'For rest of slide' to all text captions (use the curved arrow, highlighted in screenshot), but the drawback is that this timing accordion also has the start time that will then be applied to all text captions, which is not always what you'll want. So for the example of the screenshot, all text captions would get a start at 4,5secs if I applied this setting to all.
If you want all future Text Captions in all projects to have the setting 'For rest of slide' make changes to the Preferences before opening a project.
Lilybiri

When I open FF there is no text displaying(menus, content, etc.), and most of the window is blacked out. For example... I can is the the firefox button on the t

When I open FF there is no text displaying(menus, content, etc.), and most of the window is blacked out. For example... I can see the the firefox button on the top left corner, when I go to it the drop down list drops and there is no text, if I move down the drop down I hit where there is a slide out in that drop down and no text is there. So, to start in safe mode you need to go to the firefox button, and click on start in safe mode. I can't See safe mode or click on anything were safe mode should be.

hello, close all firefox windows & hold the shift-key while opening firefox in order to launch it in safemode. in the first dialog just choose "continue in safemode" and go to firefox > options > advanced > general. in there disable hardware acceleration, restart firefox normally again and see if this has changed anything.
also see [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

Contact name not displaying for texts/messages, only phone number does

When I turn on my iPhone 6 (iOS 8.0.2) in the morning (I shut it off at night), any received text messages (iMessages or standard texts) only show the phone number of the person who sent the text and the standard tone for texts is heard, when it should display the name and play the special text tone I setup on specific contact records. It is not til after I use the Touch ID or enter my passcode that the name of the contact who sent the text displays AND the special text tone for that contact is heard. This not normal behavior. Even upon startup on my former iPhone (5), any texts received displayed the contact name and played the appropriate tone when the phone was turned on during the morning. HELP! I believe this is a bug; but, would like to have this confirmed. If it's a setting or combination of settings that I'm missing in iOS 8.0.2, please let me know.
My contacts have never been stored in iCloud nor do I plan to use iCloud.
Thanks!

Try this: when device is ON remove the battery, wait a minute and turn the battery back to the device.

Display "global" text caption for a certain length of time

I hope I can explain what I'm trying to do...
I have a text caption that I want to conditionally display for a fixed length of time at the start of most of slides in my project.
The caption is placed on an introductory slide in the project, in a hidden state.
Then I have created a Conditional Action to Show the caption. This Advanced Action is then called On Enter for the slides where I want to display the caption. However, I need to be able to hide the caption again after a couple of seconds.
So essentially I want the following logic:
On slide entry, if displaying caption, then Show Caption, Wait 2 seconds, Hide Caption.
But I can't see how to do this using a single text caption that is available project-wide.
Any suggestions would be greatly appreciated!

Check out David Stiller's blog article on that exact topic
here:
http://www.quip.net/blog/2006/flash/how-to-pause-timeline
smile82 wrote:
> How do i stop a movie for a certain length of time?

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

Can anyone help me solve the problem of text displaying very rough on my new ASUS PA279Q display monitor running off my MacBook Pro?

This is regarding a brand new ASUS PA 279Q, 2560 x 1440 IPS monitor. I'm connected via mini display port (into thunderbolt port on MacBook Pro) to display port on ASUS monitor; using cable ASUS included with the monitor. Mid 2012 MacBook Pro…full specs at bottom of this post.
I have resolution set at 2560 x 1440 which is the native resolution according to the ASUS spec. I tried the other resolutions available in my System Preferences and text displayed rough with those settings too. I've tried adjusting contrast, brightness and sharpness via the ASUS control panel and didn't solve the problem. Also tried calibrating via Mac's system preferences/display and that did not improve text display either. All the text on this monitor (no matter what software I launch, Finder, InDesign, Illustrator, MS Word, Excel, VMWare Windows XP, Windows versions of Word, Excel, Acrobat, etc, all are consistently rendering text the same way --- ROUGH and with "HALOS" around each letter.
All point sizes of text and at various scales, display very rough on the screen. (My comparison is the retina display of my MBP and a Thunderbolt…so those two displays are my expectations.) I'm using the same MBP for both a Thunderbolt display (at work) and this ASUS at my home office.
On the ASUS it's not as noticeable when the text is on white backgrounds, but I'm a graphic designer and compose images with text all day everyday. Not to mention the specs on this ASUS PA279Q indicate it's built for the professional so I would expect better text rendering. I haven't even addressed color calibration and balance yet, because that won't matter to me if the text won't display any better than it is now.
I was so hopeful after researching all the specs on this monitor it would be a viable alternative to the glossy display of the Thunderbolt display. (Which, I do love the Thunderbolt display for it's clarity and how it displays crisp, clean text at all sizes. (This ASUS actually displays text decently if I increase the text so each letter is about 4" high. Which is pointless for practical purposes -- that'd be like doing page layout through a microscope!)
I kept holding off on getting a monitor for the home office thinking the Thunderbolt would be updated soon. I'd be sick if I dropped a grand on piece of 2011 technology only to learn a few days later an updated Thunderbolt display hit the market! Not to mention, I'm praying Apple comes out with a less reflective Thunderbolt display. The glare and reflection is the main reason I looked elsewhere for a large monitor; hence my asking for help. Hoping the ASUS text display issue can be worked out. My expectation is for it to display like the MBP retina and Thunderbolt display text. That possible?
Alternatively, I guess I could do the Apple Refurb Thunderbolt at $799. And see if there's a decent aftermarket anti-glare I could stick on it?
Thanks for reading my post. Hope someone can help; offer any suggestions? Words or wisdom?
Has anyone else had similar issues and figured out a resolution? Help!
MacBook Pro
Retina, Mid 2012, 2.3 Ghz Intel i7
8GB 1600 MHz DDR3
OS X 10.8.5
NVIDIA GeForce GT 650M 1024 MB
ASUS PA279Q

I uninstalled those two items. It still runs slow on start-up and when opening safari, firefox, iphoto, itunes, etc. It's not snappy like it used to be. Any other ideas? Thanks.

Material Description is not displaying for few records in Report

Dear Experts,
Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
Cud u plz suggest a good solution for it.
Regards,
Sai Phani.

Hi Phani,
For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
regards,
Rk.

Pause / Resume button combination not working when set to display for "rest of project"

Good day,
I have created a set of four objects on slide2 of my project
1. Smart Object rounded rectangle with text "(playing) - CLICK to Pause" [this is the graphic the user sees]
2. Smart Object rounded rectangle with text "(paused) - CLICK to Resume" [this is the graphic the user sees]
3. Smart Object rectangle, transparent, used as button, set to not display in project - btn_Resume
4. Smart Object rectangle, transparent, used as button - btn_Pause
A. Script assigned to btn_Pause hides btn_Pause and the "CLICK to Pause" graphic, shows the btn_Resume and "CLICK to Resume" graphic, and pauses the project by setting the system pause variable to 1
B. Script assigned to btn_Resume hides btn_Resume and the "CLICK to Resume" graphic, shows the btn_Pause and "CLICK to Pause" graphic, and resumes the project by setting the system resume variable to 1
C. All items are set to display from the beginning of slide2 for the "rest of project"
On slide 2, the buttons hide/show and pause/resume behaviors work correctly.
On slide 3, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors (show/hide/pause) occur until a good amount of time into the slide: you can click all you want for 20-30 seconds, but nothing works except the click sound. Eventually, the behavior will work.
On slides 4 and following, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors EVER work.
If the behaviors NEVER, EVER worked, I would keep looking for what I did not have set correctly, but the correct working on the slide where they are set, delayed behavior on the next, and no behavior on the remainder of slides following has me stumped.
Captivate version 6.0.1.240
Windows 7 OS
I hope I'm missing something obvious here, and I'm more than willing to face-palm if you tell me . Otherwise, I have not been able to find any setting that makes any difference. I would REALLY rather not duplicate the buttons and scripts on every page of the project. Given the blog posts I have seen saying this method should work just fine, I'm hoping there is a side quirk somewhere that I'm missing.
Thanks for any help you can give.

Without clouding with too much explanation, this technique arose out of a need to deal with (in a different project) objects that were grouped, and wanting to deal with the groups in as simple a way as possible, allow for easy swapping of group assets, and having a few buttons do multiple things. The idea of being able to have multiple interactive buttons stacked on top of each other while appearing for the rest of the project led to trying this simple construct before trying something more complex.
You are correct, that there is a simpler solution, which we ended up using because we were not able to get two interactive buttons stacked on top of each other while displayed for the rest of the project to work properly (although that is SUPPOSED to work, as far as I understand).
Here's what we ended up doing:
A) Two smartshapes used as messaging graphics
B) A single (one) interactive smartshape used as a button
C) A conditional action to pause/resume and show/hide the appropriate messaging graphics
D) All three objects (A&B) stacked, B on top.
E) All objects set to always appear on top, and to display for rest of project.
Our hypothesis, then, is that you are not able to stack interactive objects on top of each other and then display for the rest of the project.
If anyone has evidence to the contrary, we would, gladly, take a look.
Thanks for your interest Lilybiri, and for your input.
Best regards,
Hank

NOt able to get text value for 0calmonth in the query

hi,
I am not able to get the test for the calmonth in the selection screen of the Query.
i.e If the user enter the value 01/2010 as input in the selection screen. I am not able to get its text Janurary 2010 displayed in the selection screen of the query.
please let me know what could be the reason for this.
regards,
Mahesh

Hi Mahesh,
I regret to inform you there is no option to display the month text.
The system works as designed. The "Key and text" option for the
infoObject is for display the technical name and the description.
I found a customer on SDN which the same doubt and the answer for your
question. Please, check the link below:
0calday text variable
Best Regards,
Des

Text ID for text object MATERIAL does not exist - MM01

Hi All,
I am getting below error message when trying to save Material Master in MM01.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
I have searched the forums but couldn't get relevant message.
Please assist.
Thanks,
Raj

Hi Jurgen,
This is the complete message i am getting.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
If I enter MM02 and without changing anything if i save still i get this error message.
Thanks & Regards,
Raj

Text Display for 0FISCYEAR

Similar Messages

Maybe you are looking for