Text does not move to next line

at the end of each line of text the cursor is returning to the start of the same line. The text is then writting over the original. by "over" I mean you can see the original text underneath the new.
this also occurs in text boxes.
i would start a new doc but I have spent many hours on this one (10 page brochure)
help!

bledrin,
Welcome to Apple discussions.
It sounds like your line spacing is a bit wacky. Put your cursor in one of the bad lines, then click on the Text inspector > Text. I'm guessing your line spacing is set to less than 1, so that at the end of the first line, the second line overlaps.
-Dennis

Similar Messages

Text does not move to a new line, I have to scroll to the right???

In Safari and Firefox browsers when looking at some webpages the text is one long line and I have to scroll to the right to read everything. How do I restore the text so it goes down instead of across?
I searched for wrap text but could not find anything.
Thank You

Hi M'Q', Welcome Back.
It seems to be site formatting. I get it all the time in these forums when someone posts a crash log. The lines don't wrap and spread it out sideways.
My WAG; we just have to live with it. :~(

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

I'm performing a normal "Save", not "Save As". Work flow I'm using is as follows: Select photo in Lightroom 5.7 >" Edit In" Photoshop CC 2014 > (after working on photo is PS) > Save > close PS. Photo returns to Lightroom 5.7 in a new folder rather than next to the original. Prior to purchasing the monthly plan and upgrading to PS CC 2014, I performed this same work flow using Lightroom 5.6 and Photoshop CS6 without any issues.
Just for fun... I attempted to move the edited file back into the original folder. I received a prompt that said the file already existed in the original folder, however I can't see it except the new folder that LR created. I tried several different sort orders, etc without any success.
*** Follow up: Was unable to resolve the issue using Photoshop CC 2014. Uninstalled PS CC 2014 and went back to using Photoshop CS6. Return trips from LR 5.7 to Photoshop is now performing as it should: returning edited photo back to the original folder in LR 5 and placing next to the original image.
Should anyone have a suggestion on getting Photoshop CC 2014 to do the same, I would love to be educated.
Thanks for the help, dj_paige.

Importing PDF to illustrator. Text does not display.

I am using Illustrator CS6 on windows 7. I created a document on Illustrator CS4 on mac osx and exported the file to a pdf. Now when I want to edit the pdf in illustrator the images and drawings display correctly, but only certain text is shown. Not any text in particular, but just random lines of text within paragraphs. The rest of the text does not show up at all. What could be the issue?

Why not open the AI file?
In any case, as Monika points out, the PDF really needs to eb created with the AI editing capability turned on. That way, AI is opening the AI data contained in the PDF, not the PDF data.
Take care, Mike
***Oops, cross-post. I see you did preserve the AI data now.***

Cursor does not move, Cursor does not move

Cursor does not move, can not be controlled by wireless mouse and normal mouse, Are there any solution for this problem? Thank!

in selecting the word, it is very difficult to just place a cursor in the word to make any correction, because it wants to highlight it and it is near impossible to deselect
The standard mouse/text selection action should only select a word when you double-click it. Therefore you should be able to position the cursor within a word by just single-clicking it.
when I do finally get a cursor to appear instead of a highlighted word, the arrow keys don't move the cursor to where I need it
That certainly sounds amiss. I don't think I've ever seen a case where the cursor keys don't move.
So I'm thinking Leopard must have some preference / key preference thing going on?
There is a Keyboard & Mouse preference pane in System Preferences which is clearly the place to start, but off-hand I can't think which options there would cause this kind of setup.

Bug report: text does not update on the stage

I am not sure whether this has been reported:
I have several groups divs into one main group div. In these are images and text. I create a new group by copying elements from a previous group and then insert new text in the copied text box. The text does not update on the stage but is correct when I run the composition and also in the text panel.

Hi Hemanth.
I tried all day and is intermittent, why?, 'cause the numbers are now showing but the other texts not, this happen only on Chrome and Safari when the navigator screen increases size.
On Chrome:
On Firefox:
I discovered that the error appears only on the right side of the stage, if I move the buttons to center, the error disappears:
On Chrome (Fullscreen):
I have no idea of what is happening.

I cannot get my text to advance to the next line when hitting enter???

I cannot get my text to advance to the next line when hitting enter.
Any suggestions??

When I open Keyboard Shortcuts, the name field under Set: is highlighted in dark blue. I cannot type a name in it. The button NEW SET remains ungray. When I click on the button no change happens to allow me to create new set.
I also noticed that I am unable to scroll down in the InDesign document using scroll off mouse.
So I have to click and drag to get around not using the up/down arrows when moving the illustrations.
If I have to enter text I will use storybook.
If I have to delete text I will use the InDesign document.
Very limited with the functionality - I was better off using Adobe InDesign 2.0!
Will need more time to investigate why the keyboard and mouse are not being recognized. At this time I will have to use the work-arounds to meet deadlines and revisit later.

End Routine Issue - It does not move data from E_T_RESULT to RESULT_PACKAGE

Hi,
I am facing an issue with end routine. I have gone through previous posts on, how to write end routine and all.I wrote the end routine accordingly.
Here is my scenario,
I have 0CUST_SALES master data , which has all the Sales Org, Distribution Channel and Division, Sold to Party, Sales Grp and Sales Dist.
I am getting , Sold to party and Distribution channel at the field routine.
I am using, Sold to Party and Dist Channel and Division = '01'- whatever i populated using a field routine and trying to get the Sales Org, Sales Grp and Sales Dist at the end routine.
It looks like, all the code that i wrote seems correct but it does not populate any values into RESULT_PACKAGE.
Here is the code I wote at the end routine. I am not sure, whats wrong in it. I used, this link to write this routine :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/203eb778-461d-2c10-60b3-8a94ee91cbfc&overridelayout=true
Global Declaration----
DATA : BEGIN OF IT_CUST_SALES,
    DIV TYPE /bi0/pcust_sales-DIVISION,
    DIST_CH TYPE /bi0/pcust_sales-DISTR_CHAN,
    SALES_ORG TYPE /bi0/pcust_sales-SALESORG,
    CUST_SAL TYPE /bi0/pcust_sales-CUST_SALES,
    SALESDIST TYPE /bi0/pcust_sales-SALES_DIST,
    SALESGRP TYPE /bi0/pcust_sales-SALES_GRP,
    END OF IT_CUST_SALES.
DATA: T_CUST_SALES LIKE TABLE OF IT_CUST_SALES.
Start of End Routine
   SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from
    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE
    where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
End End Routine
Data comes into E_T_RESULT but it does not move to RESULT_PACKAGE. Any inputs will be helpful.
Regards,
Kumar

Hi Hegde,
Declaration is same , its like this.
   datA: e_s_result type tys_TG_1.
    data: e_t_result type tyt_TG_1.
I don't know, when i inserted this code in this post, initially it was OK but once i post i also saw , its not that read friendly.
FYI, i am trying to put the code again, lets see if it works.
SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE   where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
Regards,
Kumar

Itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

Go to the Edit -> Preferences-> Playback
In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
Thanks,
John

Javascript not working with 'Display as Text (does not saves state)'

Hi,
We have these following items in P3 of our application,
P3_EDIT_ACCOUNT Display as Text (saves state)
P3_USEFUL_LINKS Display as Text (saves state)
P3_LAST_APPROVED Display as Text (saves state)
P3_ARCHIVES Display as Text (saves state)
And we are initializing these items in a pl/sql process under 'Page Rendering'
For example,
:P3_ARCHIVES := '<font face="Arial, Helvetica, sans-serif" size="-1">Archives</font></a><td> ';
When our environment was upgraded from HTMLDB1.5 to HTMLDB2.0,
instead of displaying the proper value of :P3_ARCHIVES,
it was displaying the tags,
i.e. instead of displaying 'Archives', it was displaying the whole
'<font face="Arial, Helvetica, sans-serif" size="-1">Archives</font></a><td> '
So, when we changed all items to 'Display as Text (does not saves state)' and it was working.
But then we have another problem,
We render the rest of the same page with another pl/sql block,
Here is a portion from that pl/sql for your reference,
htp.p('
<script>
//Script to check the status change.
//The script source is rendered through PL/SQL.
function checkStatus()
var promptStr = someString;
if(ans.toUpperCase() == "AMBER" || ans.toUpperCase() == "RED")
          var cnfm = confirm(promptStr);
          if(cnfm)
          do something....
</script>
htp.print('
<td width="5%" bgcolor="#ebebc5" height="19" align="middle" >
<input TYPE="radio" name="'||l_g_fnumber||'" value="GREEN"');
IF l_allow_update THEN
     htp.print(' onClick="checkStatus()"');
ELSE
htp.print(' disabled onmousedown="return false;"');
                    do something....
Now the issue is , when we changed all items to 'Display as Text (does not saves state)', the checkStatus() function is not getting called in the onClick
event of the radio button and hence the confirm window for the call to
confirm(promptStr) is not coming up.
But if we revert back the items to 'Display as Text (saves state)',
the checkStatus() javascript function is getting called properly but html tags are displayed against the items instead of the proper value (as mentioned in ********)
Please do let us know a possible solution to this issue.
Thanks & Regards-
Rupak

Thanks Varad for your response.
This is the error i am getting.
1 error has occurred
PLSQL anonymous block source type can be used ONLY with Display Text (based on PLSQL) item type.
yes i am using in the source..
I also tried with the PL/SQL Expression of FUNCTION in this case it is executing the query but once i run the page ora- 06550 error occured.
Thanks
AT
Edited by: ranu on Jan 8, 2009 2:51 PM

Item does not move from Workflow Inbox to Work Item Executed by me

Hi experts,
We have implemented workflow inbox for invoice payment. After archive document in OAWD, we will do posting through Workflow inbox. After posting, the item should go to 'work item executed by me' folder. But the problem is the work item is still in the workflow inbox. What should we do? Pls help. This is urgent. Correct answer will be rewarded, TQVM in advanced.
Rgds,
Nanie

Hi Arianie,
First check the status of your WORK ITEM ID. You can check it in SBWP or in SWI6 transaction.
If your work Item ID still remains in the SAP Inbox & does not move into outbox i.e. "work Item Executed by me" then it may happened that your workflow is not triggered after users/responsible agents action completion. You can check the graphical status in SWI6 transaction itself.
Also check whether your Work Item ID's status is not "ERROR" . If it is "ERROR" then you need to resume the work item ID (Whose status is Error) to start/recall the workflow.
Thanks
Pravin

PDF looks fine on screen but text does not print

PDF created from Word looks fine on screen but text does not print (graphics do). Alos loses text on FTP or Email. Windows 8.1 64bit. Acrobat XI Std. Word2013. Print to PDF from Word 600dpi, use doc fonts, download as softfont. Arial, calibrai - all fonts lost. Same issue as Phillipio61 and alacker2?.

Problem not with all fonts. Problem with arial and calibri fonts - maybe others. Times New Roman, gil sans, viner are OK for example.

HT1553 my macbook pro is frozen and does not move from loading screen. Can you help?

my macbook pro is frozen and does not move from loading screen. Can you help?

Call Apple Support and schedule a appointment for a hardware check, or take it into a Apple Store.
We can't help you with that problem.
Good Luck

Playing back music on Itunes stays on 0.00 and counter does not move

Hi When I try to play any music in Itunes the counter stays at zero 0.00 and does not move along. I found this thread which best describes my problem so appears to affect quite a few others: http://discussions.apple.com/thread.jspa?threadID=1205504&start=30&tstart=0 however I have tried all the possible solutions discussed on there without success. My operating system is XP Pro. This has happened several times in the past and quite frustrating (only a reboot normally fixes it but there has to be a reason why this keeps happening). Music and video plays fine on other media players (same as users in the thread attached). My wife's Itunes also does it and she is running Vista on her laptop. By the way I have the latest Itunes updates/versions etc and have also tried restoring to earlier backups - all without success. It was playing fine the other day with exactly the same updates just not today. Thank you for any help.

Same here, only it will sync, but extremely slow!

Titles are not visible, they show up on timeline as a grey box no text does not effect other events or projects

titles are not visible, they show up on timeline as a grey box no text does not effect other events or projects. could this have something to do with motion

Without seeing the timeline it sounds as if they've been off. Maybe you pressed the V or the role is switched off in the timeline index.

Text does not move to next line

Similar Messages

Maybe you are looking for