Text Edge preview 6, .oam files

Hi Adobe Team
I am creating a folio. I have text on top of an imported edge .oam file in InDesign.
When I launch the folio, the text appears for awhile then disappears when the animated edge runs.
My only other choice is to not place the text in the image but that would defeat the purpose. How can I solved this issue?
Angelique Anderson

They’re called overlays for a reason. You cannot put static content above them.
You can try turning the text into a button that, IMO, is a rather dangerous workaround. Why not just put that text right into the Edge file?
Bob

Similar Messages

  • Edge Animate's OAM file problem placed in Muse or other unknown problem??  Please help!

    Hi,
    I need help please.  Did anyone do a whole page animation in Edge Animate and place the OAM file into Muse, and somehow all the menu and social media icon buttons in Muse are blocked by the placed animation?  All my menu buttons, social media icon buttons and a link are not working (blocked by the transparent AN stage).   I can't go to any other pages because of this issue when previewed in browser.  My animation is a slide-open page from center of the page to both right and left side, also text moved up to the top.  All are moved out of the stage once animation finished to show the home page with contents, including menu and social media icon buttons.  Thanks for your help in advance!!
    Thanks,
    mykw123     

    That answers why the two G4's talk normally! I do
    have the TCP/IP settings set up manually.
    Well, if they are already set manually, maybe you should change them to Auto-negotiate. You shouldn't have to use the Manual setting at all. If you so, then someone, usually the people who wrote the driver for the network card, have screwed something up. It then becomes your job to fix it.
    The problems are just very slow document/file
    transfer from either new to old or old to new
    computer over network, which usually is great with
    the two G4's.
    That is probably the problem. You may want to go ahead and setup the new machine with manual settings to match the G4s. Otherwise, even the Internet will be noticeably slower.
    As for Target Disk Mode...so reboot the old G4
    holding the T key and the hard drive should show up
    on the desktop of the new computer?
    That will do it. It is the best and fastest option to transfer large amounts of data. But even target disk mode is kind of slow. A real, external firewire hard drive will be the fastest of all. It is an excellent idea for backups and this kind of thing.

  • Why wont Edge Animate preview after placing .oam file in Muse?

    I placed my Edge Animate Animation into Muse but it wont preview when I select preview. It does not even show image or play animation. I followed instruction to place edge animation and in publish setting selected the animate deployment package. Deselected the frameworks via CDN (read this should not be selected but also tried it selected) made sure the stage is transparent. I saved it and published.. In Muse I selected the Place option and selected the .oam file and placed it into my webpage.  The placed file shows with animation image. I made sure to link the asset to file but it will not preview or play animation. Please help!
    Thank you,
    Lynn

    Does it loop when you publish it to the web?

  • .oam file from Edge not showing as loaded cursor in Muse

    My text is animated, shows up properly in browser preview, but when I go to import the .oam file into Muse I get a corner cursor (not loaded) and then an empty box.  No file.
    I've reserved the file several times in Edge, restarted both programs, both are latest version.
    Ideas anyone?

    Hi dparkerseviltwin,
    Does the animation show up, in the Muse "Preview Page in Browser" option?
    Regards,
    Sonam

  • Upgraded version of edge won't allow Muse to read my .oam file

    A consultant created the site for us. I am taking it live, but when I opened the Safty.an file to change a hyperlink he got wrong and edit the text, I was forced to save the .oam file into a newer upgraded version.  After this, even if I don't make any edits to the hyperlink or text, and just save to the new upgraded version, the .oam file won't load in Muse.  If I use the previous .oam file, it will. Please help, it seems like it it something clear or obvious, but nothing seems to be working.  Also, the new safety.oam file is nearly one third the size that it was previously.  http://preview.quantapowerinc.com/safety.html

    Se my response on this post:
    ]                                  Screen Message"File iTines Library.itl cannot be read because it was created by a newer version of iTunes" What is this and how can it be fixed?                    
    They do not appearon the right-had side of your post.

  • Help - delay when previewing oam-file in browser

    Hi,
    I have created a drag-and-drop exercise in Edge Animate. I've then placed the OAM-file in Muse, but when I select "preview page in browser", my OAM-file has a delay - I can't drag and drop the objects until about 4 seconds has passed. The drag-and-drop function loads instant if i preview it in the browser from Edge Animate or from the Muse Preview-mode. Can I fix this delay in someway, or what causes it?
    /Jenny

    hi,
    experts,
    i have a problem when i am viewing a uploaded file in
    my browser i don't want save , saveas option of word
    and pdf documents.,
    Please help me as soon as posible.And what exactly does your question have to do with the purpose of this forum?
    Ask in the right place and you might get an answer, in this case a forum specific to your browser (which you don't even mention, I'm pretty certain that every browser has a different way of doing things like that if they do it at all).

  • Text formatting in oam file disappears

    Hi,
    Here is the problem : I have an edge animate file with some text which supports letter-spacing and line-height. If i try this file directly from edge animate, no problem in the navigator (tested with Firefox). But when I export it as OAM file, import it in Muse, then publish.. all the settings (letter spacing and line-height) disappeared. (may be also with word-spacing and some other css settings, I haven't tried yet)
    I made a test with a very simple new Edge file and a new Muse file with only the oam file imported. The result is the same : no more settings for css like letter-spacing or line-height. You can try on your own.
    This happens since the last update of Edge and Muse. It worked well before.
    Hope this bug will be fixed very soon 'cause I was almost ready to publish my site.. but now it's unpublishable.
    Niko

    This bug has been reported already. It happens only after publishing to any format(web, oam).
    Line-height and text shadow properties have the problem. Rest all work as usual.
    You can use the below code as workaround for time being in the composition ready event handler for each text element. Add for text shadow also if you are using that proerty too.
              sym.$("Text").css({"line-height":"40px"});

  • Transform an Edge .oam file in Muse

    This for when you right-click on a .oam file in Edge.
    I dropped in two additional options of Transform and Poster Image…:

    Hey Thats for your help. I'm new to dreamweaver can you please explain a bit more as to what I need to change.
    Here is the line of code for the Animate content:
    <object id="Page1" type="text/html" width="1116" height="620" data-dw-widget="Edge" data="../../ServiceIQ Online Flyer/edgeanimate_assets/page1/Assets/page 1.html">
            </object>
    Do I just change <object id> to <iframe>? and leave everything else?
    In your snippet below, what is the <COMPOSITION ID>?
    var comp = document.getElementById('<IFRAME ID>').contentWindow.AdobeEdge.getComposition("<COMPOSITION ID>");
      comp.getStage().playMovie('one');

  • One out of a dozen OAM files doesn't appear on iPad, but does in Preview

    Hi Everyone,
    Throughout my Folio I have used many OAM files.  When I Preview on iPad from the Folio Builder window everything appears great.
    When I use DPS to compile the ipa file and install it on my iPad all of the OAM imports show just fine except for one.  Each was published with Edge Animate with the same settings and has the same settings in InDesign.
    Again, it shows when I Preview on iPad from InDesign, but not once I create the ipa file.
    Thoughts?

    This is my boilerplate respone for the "waiting apps" problem. Give these suggestions a try in order.
    1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
    2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
    4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
    6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • How do i add Edge animate .oam files to Fixed Layouts Epubs in Indesign cc 2014?

    How do i add Edge animate .oam files to Fixed Layouts Epubs in Indesign?

    Hi,
    There is a bug on iOS7 which does not let edge animate work correctly here. This issue will happen on iPad and not on Mac OS.
    There is a similar thread that explains in detail this issue you are facing:
    https://forums.adobe.com/thread/1513879
    Regards,
    Pooja

  • Is there a way to stop .oam files from previewing as previously placed files in Muse CC?

    I'm placing a new .oam file in a new website I'm creating in Muse but it previews as a previous .oam file that I used in a previous website. When preview the page on a browser it's fine but it's making it hard to place the .oam file in the correct position. Is there a way to stop this from happening so it previews correctly in Muse?

    If you're using Safari as your web browser go to "Safari -> Preferences...", select "General" from the toolbar and uncheck the "Open safe files after downloading" box.
    Other browsers should have a similar setting in their prefs.
    Steve

  • Is it possible to keep an edge animation (OAM file) responsive in Muse CC ?

    Hello Everyone,
    I'm trying to have these 4 images below responsive on Muse CC. (don't pay attention to the menu bar)
    They are meant to be link images with a caption which appears on hover.
    I know I'm not meant to be able to do responsive in muse but Edge animate is meant to work with Muse CC and Edge animate creates responsive animations if set for it.
    I thought if I create responsive animations on Edge it would work in Muse CC but it doesn't seem to be responsive in Muse.
    Is it because I missed something or there are no ways to make oam files responsive in Muse ?
    The responsiveness works when I test it from edge to a web browser.
    I'd be so grateful to get suggestions how to do this effect even without Muse knowing that I don't code much.
    In advance thank you and I'm looking forward to see what I get from this request for help as it is the very first time that I participate to a forum.
    Leon
    I'm desperately trying to find a way

    Shadowfax is right. You can record it. I use Camtasia Studio Suite but there is also a cheaper software called FrontCam1.3. You can constrain your screenshots to the area of the Edge screen and record it.

  • Problem with Edge Animate oam file's autoplaying inside Muse

    Hi,
    I have created a Donut Chart animation in Edge Animate. It has 6 donut charts. Each chart is a symbol with animation inside. Everything looks good in edge animate. But, the problem is the .oam file is not working like I want inside Muse. The scroll effect function of is not working. It autoplays every time, regardless of the scroll settings applied. I am using Edge Animate 2014.1.1 and Muse 2014.3.1. So, it's kind of the latest versions.
    I tried several different methods. I found out that the animation works fine in Muse if I don't use any symbol in Edge Animate. Then the scroll function works like a charm. But if I use symbols, then the scroll function stops working. I want to use symbols for a reason. Because, I am making the website as a template to sell and want to include Edge Animate animations in it. Without using the symbols, it will create several objects in one place. And it would be too hard for people, with less knowledge of the program, to edit them.
    What should I do now? Please help!
    Best Regards

    Hello,
    Please double click on the symbol and make sure "autoplay " is unchecked in the stage properties. then republish the OAM file and then try.
    If the issue still persist please share the compressed project file with us to take a look at it.
    Regards
    Vivek

  • Adobe Edge (.oam file) interaction problem with Muse

    I created a edge animate file which has a parallax scrolling feature in it. When I scroll, the items move. But when I load the animation's .oam fle from muse, the animation losts its scrolling effect. How can I solve this?
    (PS:I used Edge Commons to create the effect)
    (Any other suggestions for creating parallax effects with muse?)

    Hello,
    Please double click on the symbol and make sure "autoplay " is unchecked in the stage properties. then republish the OAM file and then try.
    If the issue still persist please share the compressed project file with us to take a look at it.
    Regards
    Vivek

  • Edge Animate .oam files taking a long time to load or not loading at all?

    http://pierosalardi.businesscatalyst.com
    Is there a way to correct this? I have exported this Muse Site and uploaded into my server and the same thing is happening: http://pierosalardi.com/animate/ Its taking to much time to load the .oam files and sometimes they do not load at all.
    This is a screen shot after reseting Safari and going to the site. If you see, there is no logo on the up right hand corner, or the icons at the bottom of the page
    This is another screenshot after reloading the site. Some how all the .oam files came together but only after reloading the site.
    Is there a way to correct this? I saw in another post that needed to replace the iFrame on the Muse html file and replace it with the html code generated by Edge.
    Couldn't get it to work.

    Hey Piero,
    Love your site! I'm not seeing the loading issue, but I'm also on a fast connection so that might be it.
    Took a look at the source - it looks like each button is it's own individual OAM file, which increases your load time due to the extra requests the browser has to make to load everything. Have you tried consolidating the left and right button groups into two Animate projects instead of having a seperate one for each button? This may solve your loading problems.
    You can copy and paste between projects inside of Animate so aggregating the buttons into one file should be pretty snappy.
    Sarah

Maybe you are looking for