Text editor ribbon actions cause page to automatically scroll (w/o applying formatting)

In a page with web part zones and Content Editor web part(s) for text: if you try to edit text using the ribbon menu, sometimes hovering over an action (without clicking) will automatically scroll to the CE web part without applying formatting (since you
didn't click yet).
Consider the scenario:
A content editor web part is added toward the bottom of the page.
Text is added to this (direct in the web part, not via a 'content link')
You highlight some text and go to the Markup Style dropdown...
Everything is fine until you hover over the "Paragraph" markup style, and suddenly the page scrolls to the web part you are editing, and you didn't have a chance to click and apply the "Paragraph" formatting
I have tried testing this with text typed directly into the Content Editor, text pasted in from somewhere else, and text pasted in from somewhere else using "Paste as Plaintext" option in the ribbon. In each scenario, I get the same results.
Furthermore, I have also tested this in both IE8 and IE9 and get the same results.
This appears to happen randomly with different controls. I can get it to occur most regularly with trying to apply the Paragraph "Markup Style" but I've also seen this happen with Font Size (any font size). It's very frustrating since you aren't
able to actually apply the formatting you need because the page jumps before you can click. Has anyone experienced this before? Is there any software I should check (Silverlight, java, etc.)? Any feedback would help.
Thank you!

Hi,
Thank you for your post.
I'm trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Xue-mei Chang
TechNet Community Support

Similar Messages

After applying full scroll bar to the page including header and footer, Text editor ribbon actions cause page to automatically scroll down (while applying formatting)

After applying full scroll bar to the page including header and footer, I have provided content to
the page more than 100 lines and try to format the text from ribbon actions(format text area). On mouse over of font or fore color, the control jumps to the highlighted content area and not able to select the color. The page scrolls down and not able to click
on any action.
Consider this scenario also.
A content editor web part is added toward the bottom of the page.
Text is added to this (direct in the web part, not via a 'content link')
You highlight some text and go to the Markup Style dropdown...
Everything is fine until you hover over the "Paragraph" markup style, and suddenly the page scrolls to the web part you are editing, and you didn't have a chance
to click and apply the "Paragraph" formatting
I have tried testing this with text typed directly into the Content Editor, text pasted in from somewhere else, and text pasted in from somewhere else using "Paste as
Plaintext" option in the ribbon. In each scenario, I get the same results.
Furthermore, I have also tested this in both IE8 and IE9 and get the same results.
I can get it to occur most regularly with trying to apply the Paragraph "Markup Style" but
I've also seen this happen with Font Size (any font size). It's very frustrating since you aren't able to actually apply the formatting you need because the page jumps before you can click. Has anyone experienced this before. Any feedback would
help.

Hi,
According to your post, my understanding is that after applying full scroll bar to the page including header and footer, Text editor ribbon actions cause page to automatically scroll down (while applying formatting).
I try to apply full scroll bar to the page including header and footer, the ribbon is missing after I scroll down to the web part. And I cannot apply the "Paragraph" markup style to the content.
I recommend to use the SharePoint core styles to preserve the native functionality and GUI.
By design in SharePoint, the ribbon is always at the top. When you select the content, you can apply the "Paragraph" markup style in the ribbon.
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

How to add plain text editor in OA Framework page

Hi,
I have created a page in which i have added rich text editor item but in place of rich text editor we only want to use plain text editor in page with no extra features.
How can we use plain text editor in page in place of rich one.Is there any property i need to change or i need to add any other item??
I have tried message style text by increasing its length and height in visual properties but there comes a vertical bar which i do not want.
Thanks for help in advance!
Prateek
Message was edited by:
Prateek

Try to see if OARawTextBean helps
Thanks
Tapash

Action causing page numbering error

Acrobat XI, Windows 7
I have an action that crops a PDF, and saves it using PDF Optimizer settings. When I run this action on PDFs, the resulting PDFs are numbered one page higher than the original PDF (ie, the original PDF was pp. 191-195, and the PDF after the action is 192-196). I went through the action and don't see anything about page numbering that seems to apply. Any ideas why this is happening?
The PDFs are exported from InDesign CS6 (also from Windows 7).

Acrobat XI, Windows 7
I have an action that crops a PDF, and saves it using PDF Optimizer settings. When I run this action on PDFs, the resulting PDFs are numbered one page higher than the original PDF (ie, the original PDF was pp. 191-195, and the PDF after the action is 192-196). I went through the action and don't see anything about page numbering that seems to apply. Any ideas why this is happening?
The PDFs are exported from InDesign CS6 (also from Windows 7).

Action calling action cause page expires?:

Hi
I am using struts with titles. My problem is when I press the back button in the internet explorer my page expires. I tried nocache property set it as both a way in jsp.
Note: my application design is every time an action calls another action that action only brings the page.
Is this the problem? If so what is the solution.

Is id the property of the sessionBean you're interested in?
Following the About the Application Model Tutorial,
To set properties I use:
getSessionBean1().set<propertyName>(<object>)
getSessionBean1().setID(new Integer(problemRowSet.getInt("ID")To get properties I use:
getSessionBean1().get<propertyName>()
getSessionBean1().getID()As for the button action event, I'd right click it in the designer to let Creator generate the function. If I fill it in myself sometimes Creator acts like it wasn't there. :(

How do i get pages to automatically save as a .docx format?

I can export to a word format, but how can I get it to automatically save as one?

Pages is not a Word substitute, it saves to .pages files.
You Export to Word .doc/x.
If you want a Word substitute try LibreOffice [free].
Peter

Customize text on Book Album Master Page?

How can I change the text style of the text in a metadata text box on a Book Album Master Page, other than selecting from the limited choices in the "Set Text Style" drop-down list? I would like to customize the font family, size, and color.
I am working with a Custom Theme (having given up on modifying the existing themes).
I can change the text parameters applied to the text boxes on the Master Page, but those changes are not applied to the text boxes based on that Master Page (even after reapplying the Master). Those changes _are_ "held" by the text boxes on the Master Page, however.
Thanks!

With Metadata Boxes, when I select the box in "Edit Layout" mode, no changes made via the Fonts dialog are applied.
The metadata boxes seem to be built rigidly into the themes.
Assuming that is correct , is there any way to add to or modify the styles shown in the "Set Text Style" drop-down?
I have not tried to change the behaviour. There is a list of textstyles for the custom book template inside the Aperture Application bundle:
/Applications/Aperture.app/Contents/Resources/CustomBookTemplate/TextStyles.plis t
When I open this file in Xcode I am seeing a list of fonts for Title, Cover Title, etc.
The EXIF properties are formatted in
/Applications/Aperture.app/Contents/Resources/CustomBookTemplate/TextStyles.plis t
Probably you could create a new custom template by creating a copy of /Applications/Aperture.app/Contents/Resources/CustomBookTemplate and editing these files in the copy, but as I said, I never tried this.

Using Mavericks Spelling and Grammar in Pages document causes Pages to freeze. Must Force Quit. Mavericks spell checker works OK in Text and Emails. How can I fix this problem?

Using Mavericks' Spelling and Grammar in a Pages document causes Pages to freeze, Must Force Quit. How can I fix this problem?
Mavericlks Spelling and Grammar works in Pages when used manually. And it works automatically in Text and email.

Another autocorrect bug:
I type a lot of lyrics, which tend to cotain words like ’cause and ’em instead of because and them.
I've set up autocorrect instances to change a plain apostrophe with an ending, single curly quote for these words, but they are invariably changed to a beginning, single curly quote mark by Pages. The only way I can get the correct curly quote is to type over the wrong quote manually and hope that I don't have to edit the rest of the word again, as this would cause autocorrect to kick in again and change the quote to the wrong, beginning curly mark again.
Does anyone know how to get around this tedious problem?

Pages - Default Text Editor?

How can I make Pages my default text editor?

Hi DennisG,
Thank you for the link. Now I have it, small file download. Yes it does look interesting, it will be fun to play around with getting to know it.
On a side note to both you and Yvan: Back in my Windows days I did MS Office tech support. That caused me to became quite a Word junky creating specialty docs, brochures, and the like. With the arrival of Pages rarely do I use Word, only when someone needs assistance with a Word doc. I've moved to Pages, for what I do it's so much better than Word 2004 (don't have 2008).
Some friends using AW want help with their AW thingys, so to assist them I reinstalled AW. Wow, I question why for years I hadn't used it: now I use AW more than Pages and Numbers. It amazes me how fast AW is, plus I like the DB as well. Yes the word processor and spreadsheet aren't as graphical as Numbers and Pages however, the print outs are very good, and both modules do numerous things Pages and Numbers yet cannot do.
The more I use AW the more I understand why folks wished Apple, rather than start iWork from scratch, ported AW to iWork. Let's hope the next version of iWork will catch up to AW becoming the cats meow perhaps.
Again thank you for the Bean link.
Sincerely,
RicD
Sincerely,
RicD

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I would also recommend to write the description into the meta data. This would allow to place a text frame above the image and it is possible to add meta information and file name automatically together with the image, when you place it or even in a prepared template.
Meta data information can be written easily in Bridge in the Meta File Workspace.

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

I upgraded pages. Now when I begin a new document I automatically have a text box. How do I get rid of the text box so that it does not automatically appear. What settings do I need to change?

Perhaps you are loading a template that has a text block already on it.
You might try the blank template option and set that as your go to template in your preferences

Rich Text Editor functionality for a DIV tag in a publishing page in SharePoint online

Hi,
We are having a requirement where we need RTE behavior of SharePoint 2013 Rich Html Field for a custom DIV. The scenario goes like this:
1. I have a publishing page
2. I dropped the content editor web part and to that content editor web part I will point to an HTML file that needs to be rendered in that content editor web part
3. I have one DIV in the above mentioned HTML files and I want that div to be editable and I need to RTE options for that DIV.
How to accomplish the above behavior?

Hi,
According to your post, my understanding is that you wanted to create html rich text editor for a DIV tag in a publishing page in SharePoint online.
You can create your own Rich Text Editor.
Here are some great blogs for your reference:
An Example to Use HTML Rich Text Editor
Example: Using the Editor's instance
Rich Text Editor control in SharePoint 2010
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Integrating a Rich Text Editor Like CKEditor with ADF pages

Dears
I am looking for a way to use a rich text editor like TinyMCE, CKEditor, etc... within ADF pages
Is there a simple way how to use such text editor in my ADF application?
Looking forward for your reply
Best regards
Mohamed Chargui

Mohamed Chargui wrote:
Dears
I am looking for a way to use a rich text editor like TinyMCE, CKEditor, etc... within ADF pages
Is there a simple way how to use such text editor in my ADF application?
Looking forward for your reply
Best regards
Mohamed CharguiThere is an ADF Rich Text Editor component - does that not meet your needs?

Calling APEX page in Rich Text Editor Content

In my application I am using the Rich Text Editor to allow users to enter a block of text that is rendered within a page. In some cases, they would like to link to other pages in the application from within that block. The problem I am having is figuring out how to use a relative URL (f?p) path and maintain the session ID. If I try to enter f?p=&APP_ID.:1:&APP_SESSION.as the link expression from within the editor, the resulting HTML comes out<a href="http://f?p=&APP_ALIAS.:home:&APP_SESSION.">Any ideas on how to do this such that the substitution strings get processed properly would be greatly appreciated.

Hi,
Here what you can do with substitution problem
Create procedure
create or replace PROCEDURE editor_url(p VARCHAR2)
AS
BEGIN
f (p => v('APP_ID') || ':' || p || ':' || v('APP_SESSION'));
END;
Create public synonym
CREATE PUBLIC SYNONYM editor_url FOR your_schema.editor_url;
Grant execute on procedure for DAD user
GRANT EXECUTE ON editor_url TO APEX_PUBLIC_USER; -- OHS or APEX Listener in use
GRANT EXECUTE ON editor_url TO ANONYMOUS; -- EPG
Then in editor link url you enter
editor_url?p=1
That will then you then to page 1 and procedure handles app id and session substitution
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai
Edited by: jarola on Jul 25, 2012 7:58 PM
Edited by: jarola on Jul 25, 2012 8:06 PM
I did not test this fully. It do not work :(

Editing PS Actions in text editor

Hi everyone,
A while back I created an Action in PSCS6. One of the steps in the action resized the document using the Image Size command window. I wanted to change the value from 800 pixels (height with constrain proportions) to 400 pixels. I first saved the Action using the Save Actions command using a different name and then opened it in Notepad text editor. I located the entry and changed the '8' to a '4' and saved my work. Then I relaunched PS and tried to import the new action using the Load Actions command.
Instead of the action loading into the Actions panel, I got an error message:
Could not load the actions because the file is not compatible with this version of Photoshop.
anyone know why changing one character would render the file useless?

The action palette is a full fledged action editor is a simple drag and drop to dupe your action then all you need do is edit the step you want to change then rename the Action copy.
Crafting Actions Package UPDATED Aug 10, 2014 Added Conditional Action steps to Action Palette Tips.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
More then a dozen Scripts for use in actions
Example
Download

Text editor ribbon actions cause page to automatically scroll (w/o applying formatting)

Similar Messages

Maybe you are looking for