Text element created in English language not showing in Korean language

Hi guys,
I have created a text element when my sy-langu is En but when I logged in again using KO language,,, the element I creted is not showing...
Why is this happening? or is there something that I should do before the text element i created shows in when I log in Korean language???
Thanks a lot!

Hi,
Check out transaction
SE32
Please check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/frameset.htm
check this
Re: add a new tab in transaction ME51N
Regards
Kiran Sure

Similar Messages

Text element assigned to select options not showing

Hi guys,
We have a problem in shaowing the text assigned to the select-options...
When we run the program the text element ssigned to the select options is not showing instead the element name is shown.
The original language is german, and it wont show the english word we appended to as text element for select-options.
example:
AUART insteat od blocked order
How can we show the text elemen when we run the program?
Thanks!

Hi Mark,
Go to the program text elements and select the Selection Texts tab,
There you fill find the select option for AUART and the corresponding text maintained.
You need to maintain translations for this text entered.
Chose Goto (in menu bar) -> Translation
Then maintain translation in English.
Regards,
Aditya

I have photoshop elements 9 and iphoto does not show it in my preferences edit window. How do I get it as an option in my preferences

I have photoshop elements 9 and iphoto does not show it in my advaced preferences drop down, it used to be there, how do I get it back again?

Hi, Yes you are correct in iPhoto Prefernces, Advanced tab editing I used to have iPhoto and "Use external editor.". It changed to iPhoto and iPhoto Library. I have einstaleed PSE 9 and downloaded the update. There is still no lkink to external editor in the drop down box. Have I done something wrong inadvertently or is there a clitch? can you reinstal iPhoto. I am new to Macs. Every thing came preinstalled. it is the top of the range system with 16 Gb of rRAM, 2 Tb hard drive to top graphics card etc. I used to be on Windows PC. Have more than 27,000 photos on the system. Much apprecite your reply and interest in this.

A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

OK in order to read those files you will need MS Office for Mac or install MS Windows on your Mac. You can get MS Office for Mac from anyone that sells Apple products. I would suggest the Apple Store, Best Buy, Amazon etc...For help getting the data from the memory stick I'd recommend visiting your local Apple Store or AASP and they can help you move it. It should be as simple as plugging the USB drive into your USB port and then open a Finder Window where you will see the drive on the left pane. If you don't know what Finder is or how to open a new Finder window you need the sites I've noted below!!!
Because you are new to OS X I would strongly recommend you bookmark and frequently visit the following web sites:
Switch 101
Mac 101
Find Out How Video tutorials

Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.

TS3899 the text of my incoming emails is not showing on the screen. I must have pushed some setting change but I can't figure it out. Thanks...M

the text of my incoming emails is not showing when I tap the message. I probably changed some setting by mistake but I don't know what i did. would like to be able to read my emails on the screen. the 2 line starting area shows fine.

browsing around internet found others have had this problem and recommended turn off/turn on phone, which I did, and that fixed it. at least for now. thanks...

DNG files created with LR4 do not show thumbnails

Hi,
When using LR3 to create DNG files from my RAW files, those files would show me thumbnails of my image in Windows Explorer. I am running Windows/7 (64) and have installed a CODEC from "Fast Picture Viewer" that allows thumbnails from RAW & DNG files to be shown. It seems, however, that the thumbnails do not show for DNG's created with LR4.
To Remedy this I uninstalled the CODEC. Downloaded the most recent version and installed it but this did not fix the problem.
I then went to the user forum for the CODEC product and searched for my problem. I found a thread who's solution is to turn off "Embed Fast Load Data" when exporting to DNG and it fixes the problem. I tried this and indeed it did fix it. The responder went on to say ".....When this option is enabled the files created are no longer DNGs (just an undocumented private format of Adobe that no one else can read to this date)". This statement surprised me as it is counter to what I understand Adobe created DNG to be. Can I get some input on this comment as if true it is very troubling.
My second question is that I see where to turn off the "Embed Fast Load Data" in the LR Export module, but where do I do the same thing in the Import module when I'm selecting import mode "Copy to DNG"?
And, my thrid question is this. If indeed the DNG files created by LR4 are proper DNG files and this CODEC is just flawed in some way, does anyone have a better way to allow image thumbnails to be shown in Windows Explorer?
Thanks -- Dan

Hi David,
You testing does not coincide with mine. I have consistently kept "Use
lossy compression" turned off. With lossy turned off, it seems that using
Fast Data Load prevents the thumbnails from displaying whereas turning off
"Fast Data Load" allows the thumbnail to be shown.
Below is comment from Adobe confirming that they have yet to release the
spec containing "Fast Data Load".
From: Ian Lyons [email protected]
Sent: Tuesday, June 05, 2012 12:29 AM
To: Califdan
Subject: DNG files created with LR4 do not show
thumbnails
Re: DNG files created with LR4 do not show thumbnails
created by Ian Lyons in Photoshop Lightroom - View the full discussion

Text elements translation to other language

Hi Friends,
I have added new text elements in english language to show some text in the output of the program.
The program showing the expected output. But if the user login with non english language like FR or DE ...
stll the output is showing in English as i have added text elements in english. But the expectation is when user log in with other language then output should be displayed in that language.
I got transaction SE63 to translate text element from one language to other. But here i am able to transfer text element only one language. But the users can login with different language.
Please advice how to get the output in the user login language .

Do this way
Login into DE language or En language or the language in which u need the transaltions
Go to the particular program from SE38 or SE80 then to text elements and then translation.
And then maintain the translation.
I hav done this before and it has worked for me..
Usually i login from DE and maintain its translation in English

Named Criteria created, but it does not show up in the Data Controls view

Hello there,
I wish to use a data-bound ADF Mobile ListView in one of the pages on the app. However, only entries of the underlying data that fulfill a certain condition shall be displayed in the list. The condition basically is an "Equals" test against a bind variable in the pageFlowScope. Therefore, I have created a corresponding Named Criteria for the data control - proceeded like described here:
https://blogs.oracle.com/adf/entry/create_named_criteria_in_ejb
The Named Criteria, in my case, has been created and saved, yet it does not show up in the Data Controls view of JDeveloper. Therefore, I cannot drag it on a UI element to use it.
I only have the "Operations" folder where the quick guide above also shows a "Named Criteria" folder.
Refreshing or restarting JDeveloper did not solve this.

It was all taken care of by Gaurav Aggarwal
He got me all fixed up, Thank you for your concern.
Daniel Walters

Any TextFrame Created on Server will not show as tagged on desktop

Hi All,
related to an eariler post - if I create "any" text frame on InDesign Server, it will not show as tagged when opened in desktop.
I run the following code on InDesign Server CS3:
var doc = app.documents.add();
var frame = doc.pages.item(0).textFrames.add();
//..set geometry...save document...
When I then open the document in desktop and tag the frame, it all works functionally but the frame will not display as tagged ("ie View..Structure..Show Tagged Frames").
If I add a new frame to the same document (via UI) and tag it - it all works fine.
If I copy the server generated frame - it will still not display as tagged.
Strange, and very annoying! Has anyone else come across this issue.
Can anyone else replicate it for me so I know I'm not mad or have some dodgy install?
Cheers, Scott

Scott,
I see the same problem, so no, you aren't crazy. I tried running the same javascript from within InDesign, but that text frame draws correctly. So, it doesn't look like it is a scripting problem, but a problem unique to InDesign Server.
Susan Doan

Can i store text elements created in so10 in workbench request?

hi
i have created some text elements in development server and want to transport it to test. i have used the program RSTXTRAN. it has created a customising request now, is it possible that it can be stored in a workbench request?

Hi,
No, it should be under Cusotmizing request.
This is because of the following diff:
In workbench request .... it can be programs(repository objects) and cross client data (ie not specific to one client).
Changes to client-specific Customizing objects are recorded in Customizing requests.
Best regards,
Prashant

I cannot send or receive SMS text messages and my number is not showing up in the 'Recieve At' location..how do I fix this?

I just bought and activated a new Iphone 4s and I cannot send or receive normal SMS text messages. Also, my number is not showing up in the "receive at" location. Any help??

Settings > General > Reset > Reset Network Settings
Beyond that... since you state you've tried all "recommended fixes" have you actually restored as new and not from your backup?

Ticket created on ECC does not show on SM7.0

On ECC PROD, select help->create support message, fill up info and save, a support message is created.
Because we have an SM7.0 based CHARM configured for above ECC landscape. The ticket created above should show up at that SM7.0 in txn crm_dno_monitor. However, it is NOT showing up.
By the way, on the CHARM system (i.e. SM7.0), support message created as said above, will show up in crm_dno_monitor.
Could you help tell how to fix this issue?
Thanks a lot!

Hi,
This issue is related with your RFC connections it seems.
Please check that RFC connection from ECC PRD to SOLMAN is working fine.
Revert after checking RFC connectivity status.
Regards,
Gagan Deep Kaushal

Creating Aggregate--Master data not showing:

In a Cube, following this instruction I get the table below:
Goto rsa1>Infocube>manage>select the Infocube>Click contents>select tab "field selection for output">selectall>execute>execute.
CustID CustID MatNo MatNo SalesRepID SalesRepID SalesRegion SalesRegion SalesOff SalesOff
cust001 -
2mat001---2 -srep0120--
0
cust002 -
3mat002---3 -srep0230--
0
cust002 -
3mat003---4 -srep0230--
0
cust003 -
4mat003---4 -srep0340--
0
cust004 -
5mat004---5 -srep0450--
0
cust004 -
5mat005---6 -srep0450--
0
I have already verified and both Sales Region and Sales Office have the master data but browsing the cube gives the above figure, showing Sales Region and Sales Office as blank in the first column and 0 in the second.
The master data for all these characteristics are already active
a) What can I do to fill the Sales Region and Sales Office columns, because that may be the solution to this problem in b) below
b) I have added three infoobjects to a new aggregate that I have created. Any reason why for Sales Rep, Sales Region and Sales Office, maintaining master indicates that they all have master data; and each of these InfoObjects has been activated, but while creating the aggregate, attempts to assign Fixed Value to each of these IOs works only for Sales Rep. i.e. only Sales Rep showed the master data. Why are the other two IOs not showing their master data?
What do I need to do to see the master data of these 2 infoobjects in the Aggregate maintenance screen, just like the Sales Rep infoobject?

What I did based on your advice:
Thanks for the hints, it looks like we are up to something.
Under the InfoSource tree, I selected the InfoSource on which the Cube is based. Under this InfoSource, I selected Communication Structure, right-click on blank space in InfoObject column, then selected Choose Possible entries, then selected Sales Office, and later used the option Choose in the context menu to populate the row with the details. Same was repeated for the Sales Region.
Under the Transfer Structure/Transfer Rules, the same process was used to insert the Sales Office and Sales Region in the Transfer Structure and Transfer rules tabs. i.e. the field to InfoObject mapping was maintained in the transfer rules.
There was a RED X, but after I selected Propose Transfer Rules, the RED X went away.
Result of above active:
I thought I was good to go but still on checking at the Aggregate Maintenance options, the values for these two Infoobjects were not available.
Now back to the Cube: Under the Cube, on the InfoSource beneath it, I right click and choose Update Transfer Rules but got a message that
due to changes in other objects, this update rule was set to inactive
Do you want to reactivate?
I chose Yes but got an error:
IC=IC_D IS=IS_D error when checking the update rules
It is basically stopping me from reactivating the Update Rules, so what is the work around up to this point?

Folders created thru DB link not showing in Discoverer on physical Standby

Hi All,
We are using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0. We have configured a physical standby database that we open in read only mode for reporting purpose.
We have configured the Oracle Discoverer 9.0.2.00.00 for reporting on both production and physical standby.
We have another database called legacy database, we moved 3 years old data from production to legacy database.
To access some legacy tables from production we have created a DB link in production and we have also added these tables in discoverer thru DB Link.
Now when user executes the discoverer desktop from standby database, the folders pointing the legacy database are not showing, while when we connect thru Discoverer Administrator it is showing in EUL.
I then connected to standby database thru a user and executed a select statement as
Select id, performed, performer from my_events@bkuplnk it gives me below error,
ORA-16000 database link read only query fails on physical standby 10.2.4.0Then I execute the command
Set transaction read only; and execute the select statement, it gave me results.
After that I have started the physical standby database in read only mode and issue the command set transaction read only as SYS user , but in discoverer desktop these folders are still not available

Hi,
The folders are not showing up in Desktop because the folder was not valid when the business area was opened from Desktop. By default, Discoverer checks the metadata for all the folders in a business area when the BA is opened. I think there is a preference you can set to change this behaviour so that Discoverer so not validate folders.
Usually with database links you are better off hiding the link in a database view so that the metadata for the folder is held locally.
Rod West

Text element created in English language not showing in Korean language

Similar Messages

Maybe you are looking for