Text Encoding (Big 5) not being auto-detected

I just had to reinstall OS X (10.4, the upgraded to 10.4.9) due to a bad crash. In Safari (2.0.4), I tried to view a particular page.
http://www.ettoday.com/
This is a Big-5 (chinese) encoded page; I have my Default Text Encoding set to Western (ISO Latin 1), and the page looks garbled when I try to view it, unless I go to View->Text Encoding->Traditional Chinese (Big 5), and then it displays correctly. My question is, why isn't this encoding being auto-detected and display correctly without manually setting it? Looking at the source, about 22 lines down there is this:
<meta http-equiv="ªF´Ë·s»D³ø" content="text/html; charset=big5">
which looks like the appropriate specification of the encoding. Can someone who has chinese fonts installed please verify this? Is this something Safari is doing wrong, or possibly something got lost in my system reinstall (to tell the truth, I can't recall specifically if this was a problem prior to my crash).
Thanks,
David

Ok, thank you. I gave up trying to understand html right around when the "blink" tag came out, and I just get paranoid every time I do a reinstall that I'm missing some critical part. I like the validator-- never knew about that.
Now, if you do a search on the source code for that ETToday page, somewhere far down you'll come to another section that reads:
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html; charset=big5">
blah blah blah
This does appear to be properly formatted, and maybe it's there specficially for English-default browsers. However, perhaps neither Safari nor the validator are picking up this, or maybe it's referring to something else altogether?
thanks,
dave

Similar Messages

Compressor failing: "3x should not be auto-detect at this point"

I have something that I can't seem to fix. I'm trying to render to MPEG2 but the job keeps failing with "Status: Failed - 3x should not be auto-detect at this point" error message in the status window of Batch Monitor. The logs show:
<mrk tms="273146978.300" tmt="08/28/2009 12:09:38.300" pid="278" kind="end" what="service-request" req-id="D1FA9E39-FD27-4C15-A038-A785D4C804B5:5" msg="Processing service request error: should not be auto-detect at this point"></mrk>
Weirdly enough I rendered a surround AC3 without problems earlier.
All Pro apps are completely updated but the OS is still on 10.5.8. I've trashed the Compressor preferences in my home folder and this problem occur with both rendering to (virtual) Cluster (which was trouble free up till now) and th This Computer.
Anyone have any suggestions?

I have something that I can't seem to fix. I'm trying to render to MPEG2 but the job keeps failing with "Status: Failed - 3x should not be auto-detect at this point" error message in the status window of Batch Monitor. The logs show:
<mrk tms="273146978.300" tmt="08/28/2009 12:09:38.300" pid="278" kind="end" what="service-request" req-id="D1FA9E39-FD27-4C15-A038-A785D4C804B5:5" msg="Processing service request error: should not be auto-detect at this point"></mrk>
Weirdly enough I rendered a surround AC3 without problems earlier.
All Pro apps are completely updated but the OS is still on 10.5.8. I've trashed the Compressor preferences in my home folder and this problem occur with both rendering to (virtual) Cluster (which was trouble free up till now) and th This Computer.
Anyone have any suggestions?

Blue Screen with Text re IPOD size not being valid

Now everytime I reboot, I get a blue screen full of text about the IPOD size not being valid, and I have to hit the reset button to get out of the loop.
THEN, when I try to just wipe everything off the IPOD and start over/Restore, I get a message that says IPOD manager internal error.

With the internal memory error message stopping Update, I went online to see if I could manually download the latest update...or any update. Even a previous version.
But to do that I have to go back to Itunes 7...The only reason I don't like version 7 is that my Ipod contents disappear from the Itunes source window when the Ipod is not connected to the computer.
Anyone know of a more reliable mp3 player ?
Thanks for letting me ramble.
Chip

Audigy 2 ZS not being properly detect

After clearing the CMOS battery of my mother board, my Audidy 2 ZS is not being properly reconized in Windows. Right now its showing up as just an "Other PCI Bridge Device" which Im pretty certain is the Audigy card as its the only PCI device that I have installed. I have disabled the onboard sound of my motherboard, an Asus A8N-SLI Deluxe, and gone through the Creative driver removal process. I have also reseated the card as well as tried it in another PCI slot. When I try and install the latest drivers from Creative I get an error that says that it doesnt detect a supported device. Im not quite sure what else I can try, so any assistance is appreciated.

Are you sure this is the Audigy card? If it says PCI Bridge, then it cannot be the Audigy. It must be the nForce's PCI Controller, under which the Audigy works. The Audigy is not even detected by Windows. I would recommend completely uninstalling all non-Windows drivers and reinstalling them, starting from the chipset.Message Edited by alexs3d2 on 02-22-200602:36 AM

Setting text encoding for Flash when being used

Many Korean web sites use Flash, and many of them are made in
the text encoding "windows Korean"
when I use windows it shows those sites as intended because
the text encoding of flash player in windows is set to "windows
Korean"
but on my mac, I believe Flash player uses UTF-8 regardless
of my web browser setting and many Korean Flash web sites don't
work as intended.
Is there something I can do to make them show windows-Korean
encoded characters? Any suggestion appreciated. Thank you.

Ok, thank you. I gave up trying to understand html right around when the "blink" tag came out, and I just get paranoid every time I do a reinstall that I'm missing some critical part. I like the validator-- never knew about that.
Now, if you do a search on the source code for that ETToday page, somewhere far down you'll come to another section that reads:
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html; charset=big5">
blah blah blah
This does appear to be properly formatted, and maybe it's there specficially for English-default browsers. However, perhaps neither Safari nor the validator are picking up this, or maybe it's referring to something else altogether?
thanks,
dave

How to disable a second display from being auto-detected

I have a 30" ACD and a 24" Dell hooked up to my Mac Pro, and most of the time I find myself only using the ACD. I normally keep the Dell powered off, but SL still detects its presence This actually creates a problem, because I invariably lose the cursor every now and then when my mouse strays off to the phantom display's side.
I don't want to have to keep unplugging the video cable on the second display to make it go away, and I don't want to keep it on constantly, only so I can know where the cursor is at all times. BTW, mirroring does not work, because the resolution on the 30" is reset to 1920x1200 (i.e., the lower of the two displays). I know I could get a KVM switch, but I'm hoping there is some setting in OS X (even if only accessible through Terminal) that can stop my Mac Pro from detecting a display that is actually turned off.

I use SwitchResX to disable one of my 24" ACD's when not needed. The program actually works quite well.

Proper predictive text ... Not this auto correct bull !!!

Is there ever going to be a proper version of predictive text for IOS? Android and RIM is MILES ahead with their predictive text technologies! There are some apps that can do some of it, but the intergration is POOR to say te least.
iPhone is supposed to be the best smart phone available, yet you fail MISERABLY at the most basic function of any smart phone .... To comunicate witth the device and other people
I am sure this question has been asked many times, but does anyone have any solid feedback with regards to this ?

This is a user to user forum tech help forum. It doesn't have anything to do whether Apple cares or not. We are users like you.
Post in the feedback area. I'm sure you are not the only one who has had the predictive text suggestion.

Texts over two messages not being received

Hi, Whenever I send a text that is two messages (or more) long it isn't being received and this is causing a lot of hassle, has anyone got a way this can be fixed? I've tried deleting the contact but this doesn't seem to work.Cheers

Hi,
Is the text becoming an MMS if over two messages?
What phone and contract do you have (PAYG or monthly Contract)
Thanks,

Want to stop new notes being auto-sent to email

When I edit notes in the Notes app, an email of that full note is automatically sent to my All Mail mailbox. I'd like to stop that. I tried some of the things in 2012 discussions about notes and email but these suggestions did not seem to work.

thanks for responding. I saw a few responses like this in other discussions, and in trying them almost deleted all my notes. I ended up talking with Apple. The actual answer may be what you said or may be different; it depends on how one's phone and in particular, accounts for Notes, are set up. If one's Notes app has both iCloud and an email account, e.g., a gmail account, set up for Notes, then some notes may be associated with the iCloud account and some with the email account, depending on when the notes were entered and what the configuration of the iphone was at the time.
In my case, I needed to consolidate all my notes under my iCloud account in Notes, then disconnect Notes from my email in the manner you mentioned above. This deleted the notes that had been associated with my email account under Notes (but no worry since they were copied to the iCloud account notes) and stopped the auto emails but also retained all my notes in the Notes app.

Item Texts Is Not Being Created in BAPI_BILLINGDOC_CREATEMULTIPLE

Hi.
I am Using Bapi TO Create Invoice, Every thing is created successfully , but item text is not being created. Code is as below.
DATA: s_vbap TYPE vbap,
            t_billing TYPE STANDARD TABLE OF bapivbrk WITH HEADER LINE,
            t_datain TYPE STANDARD TABLE OF bapikomfktx WITH HEADER LINE,
            t_return TYPE STANDARD TABLE OF bapireturn1 WITH HEADER LINE,
            t_success TYPE STANDARD TABLE OF bapivbrksuccess WITH HEADER LINE.
      SELECT SINGLE * FROM likp
      WHERE vbeln = v_del_doc_no.
      SELECT SINGLE * FROM lips WHERE
      vbeln = v_del_doc_no.
      t_billing-salesorg = likp-vkorg.
      t_billing-ref_doc = likp-vbeln.
      t_billing-ref_item = lips-posnr.
      t_billing-doc_number = v_del_doc_no.
      t_billing-itm_number = lips-posnr.
*      SELECT SINGLE fkarv FROM tvak
*            INTO t_billing-ordbilltyp
*            WHERE auart EQ zsoa_so_header-auart.
      SELECT SINGLE auart FROM vbak
                  INTO t_billing-ordbilltyp
                  WHERE vbeln EQ order_num.
      t_billing-price_date = sy-datum.
      t_billing-ref_doc_ca = likp-vbtyp.
      t_billing-material = lips-matnr.
      t_billing-plant = lips-werks.
      APPEND t_billing.
      BREAK-POINT.
      CLEAR: t_datain.
     t_datain-ref_doc = v_del_doc_no.
      t_datain-ref_item = '000010'.
      t_datain-applobject = 'VBBP'.
      t_datain-text_id    = '0001'.
      t_datain-langu      = sy-langu.
      t_datain-format_col = '*'.
      t_datain-text_line = 'FSG 2829'.
      APPEND t_datain.
      CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
        TABLES
          billingdatain = t_billing
          textdatain    = t_datain
          return        = t_return
          success       = t_success.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      LOOP AT t_return.
        itab_msg-type = t_return-type.
        itab_msg-msg = t_return-message.
        APPEND itab_msg.
        CLEAR itab_msg.
      ENDLOOP.
      READ TABLE t_success INDEX 1.
      p_i_bill_doc = t_success-bill_doc.
    ENDIF.
ENDIF.
CLEAR: itab_so_items, itab_so_items[] , delivery_no , itab_return[].
So Text FSG 2829 is not being created in Item Text.....

Hi Tahir,
You can check with the below thread
A question of BAPI_BILLINGDOC_CREATEMULTIPLE
Regards,
Pawan

My outgoing mail server auto defaults to port 465 but auto detect settings box is not checked

Hi Guys,
Hope someone can help.
I am having problems sending emails as my provider does not support port 465 as an outgoing mail server port, only 587 and 25. Despite not having 'auto detect settings' box checked in mac mail my port defaults to 465 whatever I put in there.
I am running 10.10.1 and the latest version of mac mail.
Hope someone can help.
Cheers
Adrian

Hello,
I figured out my problem. I had somehow changed the "user name" in the outgoing server. (edit server list > Advanced tab > user name). When I corrected the user name, so that it exactly matches the user name for the "Incoming mail server" the outgoing server is back online!
Of course, I still have the problem of having to enter my keyword password repeatedly, but that is in a different thread . . .
Lincoln

Auto-Detect Form Fields from Word 2007

LiveCycle 8.x fails to detect form fields from form documents I've created in Word 2007. I also notice that Word 2007 documents saved as Word 2003 documents do not convert the text fields either (text fields static).
Is LiveCycle 8.x compatible with Office 2007 or does it depend on the conversion from 2007 (.docx format) to 2003 (.doc format) before creating the PDF then detecting and placing the fields?

I could tell it not to run in Acrobat 9 but can’t figure out how to do that in version 11. When I use the Create Form command, I get a series of windows that guide me through the process of creating the form. Unlike Acrobat 9, none of those windows includes an option for not running auto detect. At the end of the process, the form is created with fields. The only solution seems to be to let Acrobat create the fields, and then delete them all and manually create the fields I want. Thanks for your feedback.

Pdf text inserted in page not sharp

I have a large pdf document I would like to copy into a page on my site. The problem is that all the text is converted into a picture file together with all the rest of the images and thereby renders somewhat unsharp (the text, that is). Not being an Illustrator wizard I have tried to save it all as an eps file and insert this into the page, but the text still seems unsharp. Just copying the the text in the pdf is of no use as when inserted in a text editor all spaces and tabs are lost. For the record, I don´t mind this text being a picture file as long as I can get it sharp. Any suggestions for solutions muchly appreciated. Jon

If you are creating a still menu, then design it entirely in Photoshop. Photoshop has presets for all the different formats (i.e, NTSC, PAL, widescreen, normal, etc.) Use the format that exactly matches what you are setting your menu to. DO NOT create something at a higher resolution than what you will actually use. Export out a PICT, TIFF or PNG file. Bring that into DVD SP.
If you are creating a motion menu, create that entirely in FCP. Export out a QuickTime video to Compressor where you will create a MPEG-2. Bring that into DVD SP.
In either case you will want to create a grayscale PICT or TIFF as your overlay. Create that in Photoshop at exactly the size you will be using.
Now that you have entirely made your menu elsewhere, you will will not need to add any text or graphics to your menu in DVD SP. In fact if you do it will definitely cause a loss in quality.

IPod Touch (2.2) Safari Text Encoding

My wife navigated Safari to a web page with Thai text encoding. It displayed just fine. But, now Safari seems to be "stuck" with Thai text encoding and will not properly display web pages with other text encodings.
How does one set the text encoding on the iPod Touch version of Safari?

The situation happens when you open a Western encoded page from a link on a non-Western encoded page. So, if my wife opens the Thai Bar Association page (Thai encoded) and then follows a link to a Western encoded page, that page will be improperly displayed. The solution is to bookmark that page, close all open pages and then go to the page from the bookmark. Awkward, but it works.

The "auto-detect form fields" function.

Is it the same in adobe 11 as it is in adobe 9?

I could tell it not to run in Acrobat 9 but can’t figure out how to do that in version 11. When I use the Create Form command, I get a series of windows that guide me through the process of creating the form. Unlike Acrobat 9, none of those windows includes an option for not running auto detect. At the end of the process, the form is created with fields. The only solution seems to be to let Acrobat create the fields, and then delete them all and manually create the fields I want. Thanks for your feedback.

Text Encoding (Big 5) not being auto-detected

Similar Messages

Maybe you are looking for