'Text Enhance' - unwanted links on websites

Hello,
So, only just recently, a lot of webpages I open up in Safari have words that link to website offering these dodgy offers - like iPhone's really cheap and stuff.
I'm concerned that this might be an indication that I have contracted a virus/malware.
Is this likely? How can I find out/ remove the problem?
Any help is much appreciated!

See, I didn't think I could get any viruses.
But then again I'm seeing this on a wide range of websites (I know no website is immune from hacking), but like a lot of different ones, from general information ones to official government websites.
Maybe these hackers just have WAYYYY too much time on their hands!!
I'll try that site anyway, thanks muchly.

Similar Messages

Text-Enhance: Unwanted Program

Is Shockwave Flash Player reponsible for the "Text Enhance" link:hover adverts that I'm now seeing coming up on various keywords on wbpages viewed with Internet Explorer?
I'm working on local HTML files so I can see that the "enhanced" content is being generated in my browser, not coming from the website.
I was searching forums because I thought this was some sort of virus, and then someone said that Flash player was responsible. I disabled Flash and it stopped - although that's not conclusive because flash might just be needed for it's operation.
Other forums talk about disabling the "I want this" toolbar extension, but I don't have that.
What's the story?

Disabling Shockwave Flash in IE is not really acceptable because Flash is a required component for some of the websites I visit.
The fact that Flash is facilitating Text Enhance’s operation put me onto a workaround which was to look at the Flash Global Storage Settings which you get to via this webpage: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.htm l
And then uncheck the box which says “Allow third-party Flash content to store data on your computer”
That seems to have prevented Text Enhance from operating on two machines I’ve looked at, without having to disable Flash entirely. I don’t know if there’s still something installed on my machine – neither AVG or AdAware picked it up at any point in a full scan.
There's certainly nothing showing up in msconfig.exe / startup or in my recently installed programs which doesn't have a good pedigree.

Text Enhance suddenly on almost all websites

I woke up this morning, and nearly every Web site I visit, including several of my own, now have text enhance ads, the kind where a word or two is underlined and if you hover your mouse over the underlined word, an ad displays. So it looks like I've been infected somehow. This is affecting both Safari and Firefox.
I tried resetting Safari as far as getting rid of the cache and all cookies, but that didn't do it. Anyone else know about this or what to do about it?
Thanks.

If you are using iPhoto on your iPhone these steps may help:
Try to remove the "text" by
Select the photo then
Do one of these steps---
Choose Photos > “Revert to Original.” (If you are in full-screen view, move the pointer to the top of the window to make the menu bar appear.)
In the Quick Fixes tab of the Edit pane, click “Revert to Original.” If you don’t see the “Revert to Original” button, click “Revert to Previous” until the button changes to “Revert to Original.”
You can also check to see if a caption has been placed on the photo(s) by selecting the photo, tapping the grey "square" with the i in it, and check to see if this could be a caption gone wrong. Or check to see if removing any special effects will help-- tap the gear icon, then tap reset.
ALSO Try here for more help---- http://help.apple.com/iphoto/index.html#button-1
Good Luck~

Text enhance and windows popping up

I am running OS X 10.9.4 on my MacBook Pro. Recently I have a problem with text enhance on random words in safari, as well as pop up windows appearing for a League of Angels online game, and a website called grenio.co.za.
I have run CLAMXav and found no viruses, however, it is very frustrating using the internet with these poppies and text enhances.
Can anyone advise how to remove? See screenshots below
TEXT ENHANCE
LEAGUE OF ANGELS POP UP
GENIO POP UP
Thanks!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.autodesk\* \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /APPLE [HS]|DVD/d;s/.+: //;H;};/s: /{ /V/d;s/^ */- /;H;};${ g;p;};' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Unwanted link appears in paragraphs - AP div issue?

Hello. I am using cs4 on Macbook Pro (version 10.6.8) and develping the site below.
http://www.gibbstowndentistry.com/
If you are using Firefox you may not see it, but if you are on Safari, you can see there is a link for whole paragraph in editable region (underlined). Still there is a link in Firefox, you just cannot see it (no underline)
The link is going to the box called "patient account access" which suppose to be only from the blue button called "Patinet Login" on the right side.
First 2 categories on Navi bar (Home & Our office) got this unwanted link, but other 3 categories (Dental Service, Dental Health, Contact Us) seem OK.
For example:
http://www.gibbstowndentistry.com/childrens_dentistry.html
Each category has a separate template, I so template1, 2 are not right, but other 3 are OK.
I just cannot find why this happens. If I have to I will make new pages, but I would like to know the reason. Maybe APdiv issue?
If someone can teach me why, I will be really appreciate it. Thank you.

For the first issue with links on line 127 of your code you have an "a" tag that is not closed (missing </a>).
For the second issue you may need to explain this a bit more. And I would also recommend reading up on CSS ( http://www.w3schools.com/css/ ). You are using <div align="center"> which is deprecated code when you should just be editing the Spry CSS and adding "text-align:center;" to the "ul.MenuBarHorizontal a" CSS code ( documentation - http://livedocs.adobe.com/en_US/Spry/SDG/help.html?content=WS895F3A6D-6D73-42ef-B568-3D04A BD2F171.html ).

Link my website (Zend Framework 1.12) with SQL database on Azure

Hello community!
Recently I uploaded my website on Azure portal. I built my website with Zend Framework 1.12.
My problem comes when i am trying to link my website with my SQL database.
I have already post a question to Stackoverflow stackoverflow.com/questions/20638706/link-zend-framework-1-12-on-azure-with-a-database-on-azure
Can anyone help me to running over with this problem?
Thanks in advance!

I have already tried this, but i received error and my website doesn't load!
This is my whole cone in application.ini file
[production]
phpSettings.display_startup_errors = 1
phpSettings.display_errors = 1
includePaths.library = APPLICATION_PATH "/../library"
bootstrap.path = APPLICATION_PATH "/Bootstrap.php"
bootstrap.class = "Bootstrap"
appnamespace = "Application"
resources.frontController.controllerDirectory = APPLICATION_PATH "/controllers"
resources.frontController.params.displayExceptions = 1
resources.view.encoding = "UTF-8"
resources.view.doctype = "XHTML1_STRICT"
resources.view.contentType = "text/html;charset=utf-8"
resources.view[] = ""
autoloaderNamespaces[] = "Skoch_"
resources.db.adapter="pdo_mysql"
resources.db.params.host="Server_Name.database.windows.net"
resources.db.params.port=1433
resources.db.params.username="login_name"
resources.db.params.password="password"
resources.db.params.dbname="Database_name"
resources.db.isDefaultTableAdapter=
true
resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts/"
[staging : production]
resources.frontController.params.displayExceptions = 1
[testing : production]
phpSettings.display_startup_errors = 1
phpSettings.display_errors = 1
resources.frontController.params.displayExceptions = 1
[development : production]
phpSettings.display_startup_errors = 1
phpSettings.display_errors = 1
resources.frontController.params.displayExceptions = 1

Text enhance remove

Recently I have been recieving this pop up called text enhance whenever I use a Firefox browser. On any given web page it will highlight a word in green and underline it, whenever you hover over the word it will show you some sort of ad. It usually does this for words like "lonely" showing links to ****. Any suggestions on how to get rid of it?
My MacBook Pro is only a year old and I haven't had any popup problems before this.

Aready asked and answered. See the "More Like This" box on this page.

Text Enhance is annoying can I turn it off?!?

Text Enhance is annoying on any platform, it produces horrible links that are almost always out of context and worthless. Is there a way to turn it off on the PlayBook Web Browser?
FYI it is those underlined pseudo links that show up everywhere that you did not intend to ever exist in any text you entered.
I want to forever ban it from the Internet!
Information Technology is fun! Play with IT.

do you mean when you hover your mouse over a blue text it opens a popup?
I just tend to stay away from those sites or join the ones that turn it off once joined.
It would be nice to see some addons to the broswer but it is no firefox.
I think this was mentioned in the Playbook insider event and is being looked into.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Text Enhancements

HI Experts,
1.Can any body let me know about Text Enhancements in CMOD with an example?
2.also please let me know an example for Field exit in ECC6.0 with an example with pgm RSMODPRF.
Regards

<b>Text enhancements:</b>
Allow the customer to add supplementary documentation for data fields
non-specific to a transaction, and to change key word texts.
<b>
Why do you need enhancements ?</b>
The standard applications do not offer some of the functionality you need. The R/3 enchancement concept allows you to add your own functionality to SAP's standard business applications.
<b>What are the different types of enhancements ?</b>
Enhancements using customer exits
Customers' potential requirements which are not included in the standard software are incorporated in the standard as empty modification 'shells'. Customers can then fill these with their own coding. Enhancements can relate to programs, menus and screens. Upward compatibility is assured. In other words, SAP guarantees that the jump from the standard software to the exit and the interface which call the exit will remain valid in future releases.
<b>Enhancements to ABAP/4 Dictionary elements</b>
These are ABAP/4 Dictionary enhancements (creation of table appends), text enhancements (customer-specific key words and documentation for data elements) and field exits (creation of additional coding for data elements).
<b>What is customer development ?</b>
Creating customer-specific objects within the customer name range.
<b>What are the advantages of enhancements ?</b>
Do not affect standard SAP source code
Do not affect software upgrades
<b>Hope this links would be helpful</b>
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/f0f67fff-0a01-0010-ec96-8bf8a90a9d4b?prtmode=navigate
Enhancement Framework
http://help.sap.com/saphelp_nw04s/helpdata/en/83/43e040e136742ae10000000a155106/frameset.htm
Enhancement Framework - The New Way to Enhance Your ABAP Systems
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
Implementing a BAdI in an Enhancement
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Introducing the Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc
<b>Reward if useful</b>

Can DW CS5 automate the creation of a link based on the text in the link?

Here's the situation. I often find myself creating blocks of code like this:
<a href="home?searchString=some text"><img src="..."></a>
<a href="home?searchString=some text">some text</a>
Is there a quick, painless way to type the "some text" part once and have DW automatically update the text in the links? This information is not dynamically generated, so server-side scripting is not an option.
Thanks!

Find & Replace in the source code is the only way I'm aware of.

Why text and button links on a PDF do not work in the iPad

I have Acrobat Pro 9.2.3 and InDesign CS5.
I've tried creating both button and text links directly from InDesign (Window > Interactive > Hyperlinks). I then export the multi-page PDF with "Acrobat 6 and Above" selected as well as the "Hyperlinks" and "Interactive Elements" checked. When I open the PDF in my iPad, none of the text or button links work.
Then . . .
I tried opening the same multi-page PDF in Acrobat Pro, and manually created the link boxes (Tools > Advanced Editing > Link Tool). The iPad still can't interprete these two interactive elements.
Any clues what I'm doing wrong?

Try exporting as ePub - now test inside Digital Editions and if OK - drag the file into iTunes and synch to iPhone/iPad.
It's probably a Preview issue as mentioned but exporting to ePub is good fun!
J.

How to create text buttons that link to video?

I've finally gotten around to trying DVD SP, and even though I read the whole manual, it's not at all clear if, or how, you can create text buttons that link to the video you want to play, without displaying a clip of that video in the button itself.
I have no problem creating a text button, but I can't change the font, and editing is counter-intuitive, unlike iDVD. I'd use iDVD, but it doesn't accept .m2v files, and it seems to think that my 6 videos of about 43 minutes each are too large for a DVD+DL disc, so it won't let me burn it or save it as a disc image.
Does anyone have a way out of this conundrum, or am I SOL?
Mulder

It really isn't that hard!
As Drew said, go into your menu and click and drag to create a button rectangle. With the button highlighted, look in the property inspector at the bottom and type in the text that you want to use. Ensure that you 'include in button highlight' and then set the colour choice for selected and activated.
What you get is a simple line of text which illuminates when you roll over it, and changes colour when you click on it.
Once that is done, click on the button area again and set the target to go to the piece of video that you want to have play back.
You should also set the menu call and end jump on that track to make sure your viewer can get back to the menu.
Once that is done the menu will show as a simple piece of text (more buttons means more bits of text, and the first button will be highlighted by default) and no video will play until the button is activated.
DVDSP is definitely a steeper learning curve than iDVD but for very good reasons. You get far greater control and access to far more advanced features in DVDSP. This means that some things will seem harder, whereas in fact they are just different and the process for achieving the result you want is different. Much of what you want to know is in the manual and also in the tutorials which came with the app. Failing that there are several good online spaces where you can find a lot more information... not least of which is right here, of course!

I am a innkeeper at a bed and breakfast. we use a third party web reservation site. is there any way i can link this website to my calendar to where all web bookings will be uploaded to my calendar. i have the most recent software on my mac

I am a innkeeper at a bed and breakfast. we use a third party web reservation site. is there any way i can link this website to my calendar to where all web bookings will be uploaded to my calendar. i have the most recent software on my mac

Hi,
Does the website have a WebDAV feed of their calendar?
John M

How do you add and remove links to websites in folders on Safari?

How do you add and remove links to websites in folders on Safari?

For clarification, works like a bookmark of website only it is listed in toolbar with "Most Visited", "Latest Headlines", "News", and "Popular". I have done it before but can't find it for the life of me.
Thanks!

Having an issue with passing the text of a link to a session variable.

I am having an issue with passing the text from a link to a session variable. I am adding this html as a literal for each item in the list that i have populated with a query.
List<Literal> lit = new List<Literal>();
for (int i = 0; i < posts.Count; i+=4)
Literal someLit = new Literal();
someLit.Text=
@"<div class='row'>" +
"<div class='col-md-12'>" +
"<div class='panel'>" +
" <div class='panel-body'>" +
" " +
" <div class='row'> " +
" <br>" +
"<div class='col-md-2 col-sm-3 text-center' id='javascript'> <h3>" +
" <a href='#' runat='server' onserverclick='UserProfile_Click'>" + posts[i + 3] + " </a>" +
"</h3>" +
" </div>" +
" <div class='col-md-10 col-sm-9'>" +
"<h3><a href='Thread.aspx' runat='server' onserverclick='MyFuncion_Click'> " + posts[i] + " </a></h3>" +
" <div class='row'>" +
" <div class='col-xs-9'> " +
posts[i + 1] +
" </div>" +
"<div class='col-xs-3'></div>" +
posts[i + 2] +
" </div>" +
"<br><br>" +
" </div>" +
" </div>" +
" " +
" </div>" +
" </div>" +
" </div>" +
" </div>" +
"</div>";
lit.Add(someLit);
for(int i=0; i<lit.Count; i++)
this.Controls.Add(lit[i]);
I use one of the list positions as the text for a link in two different spots. For now, lets only talk about the line:
<a href='#' runat='server' onserverclick='UserProfile_Click'>" + posts[i + 3] + " </a>
Since I am generating these controls at pageLoad, I can't make them <asp:Linkbutton>s. And since they are anchor elements, I don't have access to an onCommand attribute or onservercommand attribute.
All I want to do is access the content from inside the specific link tags that I generate on link click and set it as a session variable. That's what I would like my UserProfile_Click function to do. I cant commandargs it in like i can with a linkbutton's
OnCommnad attribute, however.
My fear is that the onserverclick attribute resolves so something else on pageLoad normally and since I am generating it the way I am similar to the way a <asp:linkButton> resolves to a generated JavaScript.
Any help?

@Brunellus
For questions related to ASP.NET use the ASP.NET forum http://forums.asp.net
You should get more, better and faster answers on the other forum. Thanks, ahead of time.
Best Regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

'Text Enhance' - unwanted links on websites

Similar Messages

Maybe you are looking for