Text entry box with double-click button - is this possible?

I need to produce a simulation in Captivate 3 where the user types in some text, then double-clicks a button to open another window.
With a normal text entry box the button doesn't seem to have the option to respond to a double click.
I can't add in an extra slide with a click box to simulate the double-click as I have icons that change colour with time on the first slide.
Are there any other ways of getting round this?

Thanks for the suggestion. That would work brilliantly normally, just not on this slide, unfortunately.
The reason for this is I have two hint icons on the screen - 1 shows a basic one then the second is a rollover slidelet with a clip of the correct action being performed. The first is on screen for a few seconds, then the second takes over.
The earliest I would be able to set the second click would be around 8 seconds in, to allow the second hint to appear before the text box pauses the slide. So anyone who immediately knew which area to click would have to click once then wait a while to make the second click.
It's annoying that the problem is of my own making by having the 2 icons, but as I've done this through a series of lessons, I can't really change it now.
I might just go ahead with the single click option (unless there's a double-click in C4? [hoping to get this soon!]) and hope that no-one notices that the screen changes a bit too quickly to really have registered the second click.

Similar Messages

How do I allow a user to enter multiple lines of text within a Text Entry Box?

I need a text entry box that allows for multiple lines to be inputted with in a Text Entry Box. How can I make this possible?

Go to the Options accordion and check 'Show scrollbar'.
Lilybiri

How can I get a click box to interact with a text entry box on the same page?

I'm creating a tutorial on using a specific system and trying to recreate what the end user would actual do in the system. On one slide, the end user must enter text into a field, then press a button (click box) to advance to the next slide. I want to be able to have the click box validate if the text entry is correct before advancing to the next slide. Is there a way to get the click box to validate the text entry? Not sure how to get the two objects to "talk" to each other rather than function independently.
Literally, I want the end user to enter the data in the text entry box, then click on the Get button. I need the Get button (click box) to both validate that the data entered in the text entry box is correct and, if it is, advance to the next slide. If the data is incorrect, I need the Get button (click box) to show the failure caption and have the end user re-enter the data correctly.
How do I get the objects to work together?

Hi there
You need to delete the Click Box. Yes, you heard me. Delete the puppy.
I know it sounds weird. But bear with me. After you delete it, double-click the Text Entry Box. Then click the Options tab. See that option called Show Button? Click it and click OK to dismiss the TEB properties.
Now you have the button you want. If you don't want a button, double-click it and set it as transparent. Remove the text. Position as desired where the Click Box was before.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Using text entry Box or Text are button

Hi,
How do I do these?
using text entry box or text area widget.
to describe:
in my first slide I have text entry boxes for
    1. User name
     2. name of superior
     3. email of the superior
let say: 1. refer to varialbe V_UserN
             2. refer to V_sup
             3. refer to V_emailS
next slide would be a video
next slide would be a text entry or a text area..this is where the user writes anything
     Text entry box with submit button
What I want from this text entry box is..if the user doesnt write anything, upone clicking the submit button, the interaction wouldbe "please write a review on the text area"..if the user write something the something, the submit button will execute continue.
how do I do this?
next slide would be a text entry box or a text area..wherein the user write something based on question (this is not a quiz slide). The message would be sent to the superiors email. how do I do this?
hope you can help me.
Thanks

To check if the user didn't write anything you'll have to compare the value of the associated variable of that TEB or Text Area with a user variable v_null. You have to create that user variable and just leave it empty.
Have a look at my blog post:
Where is Null?
You'll have to create the custom question slide with standard objects. There is an mail widget included with Captivate, but didn't try out if you can insert the value of a variable as an email address.
Lilybiri

Text entry box question

Hey all, I am currently working on a project and have run
into a snag and cant seem to find the answer, or even if what i
need can be done.
Question 1: how do I advance a slide with the correct entry
of a text field without a button or keypress?
Question 2: if this is not possible, how can i have a text
entry box check for correct input using a custom button?
Any help would be appreciated, Thanks.
M. Anderson

Hi M. Anderson
The first question may be accomplished if (and only if) the
last letter the user is supposed to type is unique among all the
letters. For example, BOFFO would not work. O occurs twice. But
LIFE would work, because E is unique. You could then configure the
letter E to be the shortcut for the Text Entry Box.
For the button, it's pretty easy. Click the Options tab and
look at your choices. Make sure the "Button" option contains a
check mark. After you dismiss the dialog, you end up with a rather
generic looking button. But once you enable the button, you may
then double-click it to edit its properties. You could choose an
image, or you could make it invisible and position the invisible
button over another image you placed on the slide as a simple image
object.
Hopefully this helps some... Rick

Text entry box actions based on value

Hi there..
I am currently working on a software simulator where users search for orders by typing an order number in a search field... In Captivate I have created a Text Entry box with "submit" button, what I am trying to achieve in is if the user type specific value (numbers) and click "submit" button it will take them to a specific slide in the project BUT if they type difference value (in the same text entry box) and click "submit" button it will take them to different slide in the project ?
hope I have explained the question clearly.. btw I am using Captivate v5
thanks

OK, you know how to add the correct entries. Set attempts to infinite, and create this conditional action to trigger by Success for the TEB:
I created a user variable to associate with the TEB instead of the generic one, it is labeled v_order. I labeled the slides to jump to as well, makes it easier to use in an advanced action. Screenshots are from CP8, so will look bit different for you, but what you hneed is the same.

Text Entry Boxes and their content not being captured in Automatic Recording

I have searched the forums here and elsewhere extensively and whilst I have found people with similar issues, I have yet to find a solution. My problem is this:
I am trying to record myself using a piece of software which contains numerous text fields. In the past, when using Captivate 3, I would simply fill out these fields and Captivate would record my entries automatically. When the project was played back, the training simulation would pause and allow the user to type in the text field and provided the entry matched the options I had defined, the simulation would continue to the next step.
So, my colleague and I have since bought Adobe Tech. Comms. Suite 2 and have upgraded Captivate 3 to version 4. Ever since doing this we have both been unable to successfully capture text entry boxes with their content when recording automatically in any mode. We have checked and triple checked the settings to make sure that the automatic capture of text entry in fields is turned on yet we still cannot get Captivate to perform this task it once so easily could. We both suffer from the same problem on both of our installations of Captivate 4. We have tried recording in all modes with no success.
I am tearing my hair out as I need to come up with some sample content for a major Governmental client which would be worth a 5 figure sum to my company and I really don't relish having to manually create every text entry box as there are a LOT of them in this application!
I have also reported this as a bug to Adobe using the correct form. As yet, no response.
I would really appreciate any genuine help that can be offered by you guys.
In desperation,
Rob.

Ok, I think I've sussed it!
I've been pulling my hair out for weeks on this and after posting on here, I decided to try something and I think I may have found the problem.
I work with a laptop as I am a Trainer and therefore quite mobile. When I'm in the office, I dock my laptop and use the Extended Desktop functionality of Windows so I have my laptop screen and a second 19" monitor which i find incredibly useful as screen real estate is always at a premium. And this is where I believe the problem lies.
I performed a simple test and have repeated this test with identical outcomes everytime. Here is what I did. I fired up Captivate and Outlook and opened up a new mail window in Outlook. I then set Captivate to record the new mail window and hit record. I typed some text into the To field and the Subject field and then stopped the recording. I then previewed the results. When the new mail window was on my primary screen, (i.e the laptop) the Text Entry Box recording worked 100% fine. However, if the new mail screen was residing on my secondary screen, i.e. the monitor, the Text Entry Box recording failed!
So it would seem that Captivate 4 has an issue with seeing the text entered on a secondary monitor when Windows is running in Extended Desktop mode. I am absolutely certain this wasn't an issue with Captivate 3 as I created plenty of content without any of these problems and I was using the Extended Desktop back then.
So, if anyone else is having the same issue, and you are running an Extended Desktop, try what I did above.
In the meantime, I am raising this issue with Adobe in the hope they can get this fixed, but at least now I can carry on with my content creation
Regards,
Rob.

How to make mutiple shortcut keys in one text entry box

I'm trying to make F8 and Enter work in one text entry box and only one because I need to make the scoring work the way I want it to. I have made both F8 and Enter work, however they are both in seperate text entry boxes when I want both to work in the same text entry box... Please Help, this will solve alot of problems I've been having.

Ok so I tried using advanced actions and failed... here's my attempt on putting 2 shortcuts in one text entry box with different entries like the problem described earlier on this thread:
Note: I have 2 TEB in one slide I tried using in this action.. 1 has variable name PF8, the other has PF82, where I'm trying to have PF82 contain both actions of both TEBs.
1. Went into advanced actions.
2. Action name: Linking2inone
3. Made it a conditional action.
4. In "IF" attempted to use both any and all conditions are true
5. Also in "IF" PF82 contains PF8
6. Actions Jump to Slide 11
7. updated action successfully.
Then I closed advanced actions. I tried making the PF8 TEB have "no action" when correct and tested it... didn't work... then I made PF8 TEB have Jump to slide 11 when correct, cut and pasted it to another slide because I thought that PF8 TEB as a seperate TEB in the same slide was messing with the Advanced Action I'm trying to perform. Therefore, since PF8 was just in another slide, PF8 wouldn't be deleted still having the same action value in advanced actions having PF82 contain the action of PF8; but this failed as well...

Captivate 4 AS2 Text Entry Box not working with Flash Player 11

I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?

You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai

Text Entry Box--Advanced Actions--Conditional Statement--Double quotes in literal input value

Hello forums,
I'm new to the forums (and Captivate in general), but I'm having a real problem carrying out a tutorial design and I think you may be my only hope. Let me explain what I want to do and the difficulty that I'm having:
I'm an instruction librarian at a university, and I'm designing an interactive tutorial for English 100 students to complete in order to become familiar with how to search the library catalog. What I've done is taken a screenshot of the catalog search page, made it the background of a slide in Captivate (vers. 6), and placed a text entry box over the search bar in the screenshot. The idea is for the students to conduct a simulated search by choosing one of three suggested search string formulations, and depending on the search string they enter, the tutorial will jump to a slide featuring a screenshot of what the actual search results would look like. The idea is to emphasize the use of keywords over full-sentence phrases, and the use of double quotation marks to enclose multi-word search terms.
So I've set the action for the TEB to "Execute Advanced Actions" and then created some IF/THEN statements in the "Advanced Actions" pop-up window (with action type set to 'conditional'). The script is such that if the student enters the first search option (how does sleep affect college students) in the TEB, the tutorial jumps to 1 slide, if they enter the second option (college students AND sleep), featuring a Boolean operator (AND), the tutorial jumps to a 2nd slide, and if they enter the third option ("college students" AND sleep) with the double quotes around "college students" and the Boolean operator, the tutorial should jump to a 3rd slide. This action script works fine for the first two input options, but I can't make it work for the third search option.
I think that it has something to do with the fact that the third input option features double quote marks, and this seems to throw off the script (I tried a quote-less input value for the third IF/THEN just to make sure that it would work jumping to the 3rd slide and it did), and I'm wondering if anyone has any suggestions as to how I can get around this issue. Again, I need it to work so that if the student enters "college students" AND sleep, with the quote marks and the Boolean operator, the tutorial will jump to a slide showing the search results if those search terms were used in a real search of the catalog.
I'd be extremely grateful for any help that anyone here can give me, we've been trying to make our online tutorials more engaging and interactive (and therefore more interesting), and I think this would be a great way to teach students about using quotes in their catalog searches.
Thank you for your time and consideration.
Andrew Wilk
College Library
UW-Madison

The tutorial is for a "how to use catalog searching" instruction in an undergraduate library session. We use boolean operators (AND, OR, NOT) to combine search terms, ex. to search for books about the sleeping habits of college students, I would enter "college students AND sleep." Because "college students" is a multi-word phrase to describe one concept, I need to put quotation marks around the phrase to prevent the catalog from searching for the individual words separately, so the most correct search becomes ["college students" AND sleep] with quotation marks around only "college students," a user-typed "AND," and the word "sleep" (no q-marks).
A colleague of mine worked out a pretty cool (if complicated) solution that I'll share if anyone is interested. Since the q-marks where the problem, we've set it up so that the TEB validates the response for the search string with q-marks around "college students." If they enter it correctly, the tutorial jumps to the corresponding slide. The attempt # is set to 1, and if the user fails to enter the validated phrase (they misspell or use one of the other response options) then the TEB is set to run an Advanced Actions Script in which the other two options are scripted in IF/THEN statements that cause, when the term is entered correctly, the tutorial to jump to their corresponding slides. We've created another tab of IF/THEN statements that say that if the response is NOT equal to one of these response options, then the slide restarts (technically the slide "jumps" back to itself and starts over) and the user gets another chance to start the cycle over again.
I know this is confusing (I had a really hard time explaining it in words), so if anyone is interested I could make a Jing video when I have some time.
Thank you for all your suggestions

Problem with Text Entry BoX in Adobe Captivate 6

I could not enter correct responses for my text entry box. Plus, the "success" and " failure" options were greyed out for me under properties>options.
I notice my icon is IAB for text entry box, whereas some users have a placeholder sign for the icon.

This is very strange, even when not validated you should have at least the Success option in the Properties panel. If it is not validated you are left only with the Success event, that can fire an action when the Submit button for the TEB is pressed (or the shortcut key is used). You cannot be working on a master slide, because it is not possible to insert a TEB there. Please, post a screenshot of the stage with the properties panel, actions accordion.
http://blog.lilybiri.com/events-and-advanced-actions
Lilybiri

Submit All button for all text entry boxes at end of exam in Captivate 7

Hi everyone,
I am new to this forum, and I was hoping that someone could help me out with a problem that has been eating my lunch for the last week.
I have a captivate 7 project that I am setting up as a virtual workbook, with text entry boxes asking true/false, yes/no, and short essay questions through out the most part of the workbook, and then at the end it has a series of multiple choice questions that are set up on question slides. Is there a way to have all of the text entered in the text entry boxes submited along with the quiz questions at the end, to my LMS? And if at all possible, still inform the user if there are any questions that have not been answered? Like I said, I am new to this forum, so if I forgot to include any important information, I apologise, but if anyone could help me ouot, I would be extreemly thankful!
thanks,
Luke

thenks for the reply Lilybiri! As far as I have been able to find, there is no way to associate a submit all button with TEBs, so I am not sure if this is something that I am overlooking, or if I am misunderstanding the recomemendation.
What I am trying to do is set up a bunch of TEBs to be answer entry boxes for questions throughout the workbook, which will lead up to an exam. The exam, I am good on, because it has the submit all button attached. But the TEBs that I am using as the answer entry boxes, I can't seem to find a way to link them all to the same submit button.
I hope I am being pretty clear about it, but I've been pounding away at this for a while, so I fear it might come out a but rambly. So, please let me know if I need to clarify anything.
Thanks!

How do I show a hand cursor for a text entry box button

I'm using Captivate 5 and have run into an annoying problem...
For a general click box, there is an option for "Show hand cursor over hit area" which will result in the cursor changing to a hand when rolling over the click box region in the published presentation. I want to do the same for the 'submit' button in the text entry box. Is this even possible? I'm hoping to keep things consistent as a user is clicking through the presentation.
I find it odd that it doesn't have the same property as found on the clickbox considering it has the same purpose. I'm using a background screenshot image to simulate an entry in an application, so I'm actualy hiding the submit button, but the button I want them to press lacks the hand cursor that would indicate it is clickable. I don't want to use a click box to allow the user to move on because I still want a failure in the text entry box to prevent the user from moving on.
Hope that all makes sense.

Hi there
Another approach is to use a Rollover Caption. Just remove any text and configure the caption as transparent. Then layer the Rollover area over the part where you want the hand to change to a cursor. The net effect will be that the cursor change will occur. Clicking will then result in triggering the underlying Submit button, which appers to be invisible and layered over an image.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Unable to close open apps with double clicking the button and when I tap screen does not respond?

Cannot not close open apps with double clicking the button Since downloading iOS8.

What happens when you try? Does double clicking the ?home button bring up the Task Bar of recently used apps? If so what happens when you flick up on the preview screen for the app you want to close?
To quit an app double click the Home button to reveal the row of recently used apps. Flick up on the page preview and it will fly away and disappear. That quits the app.

Sublime Text 2 won't open files with double click

Hi, this is my first time asking for something.
Well, i've been using Scribes, but sometimes i need tabs in my text editor, so i installed Sublime Text 2.
The problem is that i can't open files with double click, i need to use "subl filename" and that it's not funny :S
If i double click a file ST2 opens, but with a tab named "file" and without content.
Is there a fix for that?
My Arch installation (if is neccesary):
Arch x86_64
Openbox (stand-alone)
PCManFM
P.D: sorry for my english D:

the reason seems to be a broken desktop file. `/usr/share/applications/sublime-text.desktop` says `Exec=subl %U`, but it should be `%f`. Also the Aur package does not provide a `subl` symlink so you should create one.

Text entry box with double-click button - is this possible?

Similar Messages

Maybe you are looking for