Text fades after I enter using the typewriter tool?

text fades after I enter using the typewriter tool. It never did this before not sure what changed...what should I do?

Hi pleasehelpyasmin,
Please see Typewriter Tool's Text color is no longer black and let us know if that does the trick!
Best,
Sara

Similar Messages

  • How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac?

    How do you increase the font size to bigger than 24, using the typewriter tool in Adobe Acrobat Pro 9 for Mac?   Often I just want to label an item on a map that is in PDF and want to use a simple label rather than a Text Box for labeling, but have yet to find a way to increase the font size beyond 24.   Can someone help me with this? - JML

    Read this:
    https://forums.adobe.com/thread/1468782?sr=stream&ru=2382437

  • Embedded Windows Reader 10.1.2 Crashes Using the Typewriter Tool

    Since Reader 10.1.2 my typewriter tool documents are not working properly in an embedded Adobe Reader window, e.g. in Firefox or Internet Explorer.
    Opening the first file at http://www.ld-didactic.de/software/1.pdf shows the typewriter tool window as usual.
    Opening the second file at http://www.ld-didactic.de/software/2.pdf doesn't show the typewriter tool window anymore.
    Also, opening the first document again will not show the typewriter tool window again. Instead the Reader crashes often while loading more typewriter documents or while closing the embedded Reader.
    I tested it with Adobe Reader 10.1.2 in Firefox and Internet Explorer on Windows Vista and Windows 7 x64 systems. It worked with Adobe Reader 10.1.1.
    Can anyone reproduce this issue?
    Michael

    Did you open the files inside Firefox or Internet Explorer using the embedded Reader?
    Do you have Adobe Acrobat or Reader 10.1.2 installed on a Windows Vista or Windows 7 system?
    Only the first attempt opens the typewriter toolbar correctly on the systems I tested. Later on no typewriter toolbar opens again and I often get BEX (buffer overflow exceptions) resulting in DEP (Data Execution Prevention) exceptions:
    Problemsignatur:
      Problemereignisname:    BEX
      Anwendungsname:    AcroRd32.exe
      Anwendungsversion:    10.1.2.45
      Anwendungszeitstempel:    4f02e382
      Fehlermodulname:    AcroRd32.dll
      Fehlermodulversion:    10.1.2.45
      Fehlermodulzeitstempel:    4f02f76f
      Ausnahmeoffset:    00ad7b34
      Ausnahmecode:    c0000005
      Ausnahmedaten:    00000008
      Betriebsystemversion:    6.0.6002.2.2.0.256.1
      Gebietsschema-ID:    1031
      Zusatzinformation 1:    fd00
      Zusatzinformation 2:    ea6f5fe8924aaa756324d57f87834160
      Zusatzinformation 3:    fd00
      Zusatzinformation 4:    ea6f5fe8924aaa756324d57f87834160

  • Is there really no way to keep the Typewriter Tool selected in v8.2.1?

    Hello All:
    I find it almost unbelievable that Adobe Acrobat Professional cannot keep the Typewriter Tool selected; is this possibly true?
    I use many scanned formed that simply do not convert; I cannot make all of the entry fields text boxes.  That wouldn't matter if the person completing the form could simply use the typewriter tool, as I am not looking to massage the data in any way.  But to ask them to click on the Typewriter Tool after every single entry is ludicrous.  Instead, they print out the forms and answer them in pen! (Kinda defeats the whole point.)
    Is there any way to keep the Typewriter Tool selected?

    Have you checked the 'keep tool selected' checkmark in the Properties for the Typewriter tool? You have to do it after you have selected the Typewriter tool, but before you have actually used it.

  • G'day, i am trying to type into an adobe document using the typewriter function. However everytime after i type the text vanishes. It is almost as if the text is white and vanishes into the background. However this is not the case as the works are not vis

    G'day,
    I need some help, i am trying to type into an adobe document using the typewriter function.
    However every time after i type the text vanishes. It is almost as if the text is white and vanishes into the background.
    This is not the case as the works are not visible regardless of the background color.
    The text box remains available and can be edited if clicked on, also if i double click on it the typed words become visible and editable, however once i close the box i cannot see them on the screen.
    I would appreciate any help i can get, i cant seem to do anything using properties or view.
    Thanks 
    Tiernan

    Hi Sara,
    See response to your questions below:
    1.     Are you running into this issue in a specific PDF, or in all of them?
    A.     All of them
    2.     What version of Acrobat are you using (and, are you on Mac OS or Windows?).
    A.     Using Acrobat 10.0\Acrobat on Windows
    3.     If you look at the text properties on the Tools panel (under Format), what color is the text swatch?
    A.     Test swatch for the text is black
    4.     What happens if you change the text color?
    A.     Nothing.
    I look forward to hearing back from you.

  • How do you type directly on a document in Adobe 10?  I used to use the typewriter in Adobe 8

    How do you type directly on a document in Adobe X?  I used to use the typewriter function in Adobe 8, but I don't see that in Adobe X.

    It's now called "Add or edit text box".
    http://blogs.adobe.com/acrolaw/2011/01/where-is-the-typewriter-tool-in-acrobat-x/

  • Filling text/using a clipping mask, then using the knife tool

    Hey, new to the forums here, and I have a problem....
    I'm digitizing my notes for an earth science class and I'm using Illustrator CS5.
    I'm attempting to make a simple text effect which is leaving me baffled.
    The text says "Earthquakes" (in Impact, 24pt.)
    I wish to texture the text with a photo of sandstone.  I can do this.
    I wish to cleave the text in twain with the knife tool.  I can do this, too.
    What I cannot do for the life of me is to cut the text in half after applying the clipping mask.
    Nor can I apply the texture (via clipping mask) after cutting the text in half.
    I've tried all manner of different combinations, including doing some of the work in Photoshop, and still nothing works.
    I tried to create an outline (apparently essential for using the knife tool on text), cut the text in half, and then make the clipping mask, but that only gives me hollow, invisible letters which I can't seem to fill with the appropriate image.
    Does anyone out there have any ideas?
    In case it's not clear, I want my text to be filled by an image, then I'd like to cut the text approximately in half (I would prefer to use the knife tool, as it looks better with a curved cut)
    It's that simple, but I haven't been able to stumble upon a solution on my own.
    On a side note, I've also happened upon some tutorials for "cutting text" that involves drawing a line across it, then using Divide from the Pathfinder toolbox, but this keeps giving me errors.  Thoughts?

    I like your answer because it showcases things I had never thought of.  As it happens, minutes after posting this I decided to reverse the workflow from Illustrator into PS and then back.
    Essentially, I converted my text via "outlines", used the knife tool, then cut and pasted it into PS.  Then I added the stone texture into a new layer and applied a mask.  I cropped it and imported it back into Illustrator.
    Of course, that's a lot of steps, so as soon as I get back, I'm going to try the way you just described as I think it will come in very handy in the future.
    Thank you.
    Message was edited by: MercuryCrest

  • After I used the migration tool to transfer contents of my previous MacBook Pro I cannot log in to my new MacBook Pro. I have tried using old and new passwords but to no effect. I cannot use my Apple ID. How can I re-set my MBook to factory setting pls?

    I have been a proud owner of Apple products for many years. However, this problem is very frustrating! Any help will be appreciated. I used the migration tool to transfer the contents of my old MacBook Pro to my new shiny MacBook Pro Retina! After migration finished I tried to access my new MacBook Pro retina. However, when asking me to log in it refuses to accept the passwords from either the new MacBook or the old one! I do not have the option of using my Apple ID either.... Please help! Unfortunately, I am past my 90 day Apple Support!!

    Restart holding down the CMD+R keys, launch Disk Utility and erase the HD, quit DU, and restore the OS. On first boot, use the Setup Assistant to do the migration. Details in Pondini's Setup New Mac guide.

  • I created a playlist with 100 songs.  I want those 100 songs played using the shuffle option.  This no longer works in iTunes version 11.1.5.5  How can I get an entire  playlist to paly one song after another by using the switch option?

    I created a playlist with 100 songs.  I want those 100 songs played using the shuffle option.  This no longer works in iTunes version 11.1.5.5  How can I get an entire  playlist to paly one song after another by using the switch option?

    You're welcome.
    Going back to your original post:
    5) Tried running Itunes in 'safe mode', running itunes as an administrator..nothing.
    Was that iTunes' safe mode as opposed to Windows' safe mode? iTunes safe mode is invoked by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
    Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
    tt2

  • I am trying to sharpen the scanned image of an old picture. When I use the sharpen tool in the book mode, the picture is momentarily sharpen when I hold mouse button down then fades to prior condition.

    I am working on a book (theme: photo essay). I have a scanned image of an old photo which is fuzy. I try to use the sharpen tool. When I hold the track pad down to make an adjustment and then release the pad, the image is momentarily sharper then fades to its prior state. How can I get the sharp version to stay?

    I am working on a book (theme: photo essay). I have a scanned image of an old photo which is fuzy. I try to use the sharpen tool. When I hold the track pad down to make an adjustment and then release the pad, the image is momentarily sharper then fades to its prior state. How can I get the sharp version to stay?

  • HT3986 I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy amac and install the OS  forom the pc to the apple product i will not use the pc after can i use the OS off

    I have a pc that is one year old and the hard drive is crashing we use it only for quick books to run our small business I would like to buy a macmini and install the OS  from the pc to the apple product i will not use the pc after, can i use the OS off the pc or do I have to purchase another?

    I think you can get Windows 7 for around $99. Install the 64bit version as the 32bit version will not be able to use all your new computer's ram if you have more than about 3.5gb.
    Back up your quick books data now before the old hard drive dies. You can copy your data over to your new installation of Windows and quick books.
    By the way, there is quick books for Mac http://quickbooks.intuit.com/mac/?sc=BNR-000-COR-quickbooks&priorityCode=4902000 000&cid=ppc_google_QB-Intuit-Core-Brand-Mac_quick-books-for-mac_exact&site=&ad_i d=9347918288&raw_keyword=quick%20books%20for%20mac
    So you may not need to install Windows at all.

  • Photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

    photoshop cs6 error "could not use the type tool because the target channel is hidden.  happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point.  i really need to get thsi figured out. thank you.

    You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
    A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
    So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
    Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

  • After Effects CS6 11.0.2 crashes when using the pen tool (Mac OS X 10.8.2)

    I'm using After Effects CS6 11.0.2 on Mac OS X 10.8.2. Whenever I use the pen tool to add a vertex, the application crashes. I've submitted several crash reports to apple (they get sent to apple automatically when the app relaunches).
    My specs:
    iMac
    21.5-inch, Mid 2010
    Processor  3.06 GHz Intel Core i3
    Memory  12 GB 1333 MHz DDR3
    Graphics  ATI Radeon HD 4670 256 MB
    Software  OS X 10.8.2 (12C60)
    Anybody else having this problem or have a solution?

    So I have discovered it only crashes when adding a vertex when I'm editing the max a few frames in. When I add vertices on the first frame of the comp I don't have any trouble. I've tried unchecking the box that says preserve constant vertex count, and it still happens.

  • A question about using the history tool after using the extraction tool in photoshop cs3..

    For example:
    http://www.layersmagazine.com/photoshop-...
    When I use the history tool, it erases the image instead. Whats up with that?

    G'day Chris
    I can't tell from the link exactly which tutorial you mean!
    If the original layer is a white background and the snapshot is set to this then the history tool will paint back white even if you then paste or drag an image onto the layer above this.
    You would have to take a seperate snapshot of your image layer and set this layer as the snapshot you want the history tool to use before you start working on it.
    One neat thing you can do is if you paint back some detail with the history brush you can immediately go to Edit > Fade and fine tune how much of the effect you want to apply.
    Hope this helps.
    regards
    John

  • My batch feature in bridge has disappeared completely after update, I uninstalled everything adobe CC using the cleaner tool

    My batch feature in bridge has disappeared completely after update, I uninstalled everything adobe CC using the cleaner tool.
    I sue the batch feature for my job everyday to batch multiple images with a custom action, I need this feature back ASAP
    Iam on a new 27 IMAC OSX 10.9.4
    Adobe CC 2014 newest version completely up to date.

    The cleaner tool doesn't touch presets, templates or other user data. All it does is flush the installer database to remove blockages. The last time it actualyl deleted any files and folders was with CS3. so whatever you did, you may have hit the wrong button. And while I underrstand your frustration, the download pages states that you are advised to backup your data, regardless...
    Mylenium

Maybe you are looking for