Text field does not expand in imported template

Hi Guys,
I need to import a .pdf document template and work from there. Some of the fields will recieve text values that are of a length that is not known at design time. Therefore, the field needs to be able to grow. I cannot get this to work.
If I do the same procedure in a form from I create from scratch (wrapping text field in in subform, set subform as flowed etc etc) this does seem to work. But, when I apply the same steps in the template I just CANNOT get the text fields to grow dynamically.
Is it therefore only possible to design expandable fields in forms you build from scratch in Adobe LuveCycle designer or are there steps you can recommend for achieveing the same thing when working from an imported template?
Kind Regards,
Christiaan

So it that likely to change in the foreseeable future?

Similar Messages

My text fields will not expand

I have a suggestion form that i created in adobe livecycle. The text fields will not expand when there is more text than what fits in the box. A scroll bar comes up when there is more text than what can fit, but this will not do. I have the 'expand to fit' checked and allow multiple lines. Any help?

Hi,
Have a look at this example of the process for making fields dynamic: http://assure.ly/g80MVY.
A couple of pointers:
The form will need to be saved as a Dynamic XML Form in the save-as dialog.
You should group objects that don't need to be flowed into a Positioned subform(s), as step 3 will move things around.
The page will need to be set to Flowed in the Object > Subform palette.
That should get you most of the way there.
Niall

Texting field does not automatically open upon tapping in iOS6?

Hey there,
I've noticed since I upgraded to iOS6 that the field at the bottom of my text message screen, which allows you to input the text message reply, doesn't open when you tap it. Instead, to open it up, I have to swipe from the bottom up.
Is this intentional, or is this something only applicable to my version of the operating system? It's extremely annoying, as when I'm at work it became a natural response to just tap the field and begin replying.
Thanks and regards.

Hi falkpl,
thanks for your work around.
I do not use a mouse click solution because I can not distinguish between a mouse click and a touch on the screen. And I prefer to not launch any on screen keyboard on a mouse click. Especially because the on screen keyboard opens anywhere on the screen and can hide the control. This is especially nasty when there is a physical keyboard (which is probably is connected when a mouse is there).
I could combine the ideas. Clicking in a control could open a VI nearby, which only shows a small keyboard icon. Clicking this icon would start an on screen keyboard (osk.exe, tabtip.exe, a keyboard written in LabVIEW).
But this is reprogramming the existing behaviour of windows, not really funny.
Placing the "Keyboard Icon Button" VI nicely would take some time, but should work because all is in LabVIEW. (It would also open when using the mouse, but only a small icon should be ok.) For not hiding the active control by the on screen keyboard, the task gets hard. (Positioning the TabTip.exe window is not easy, and creating [or adapting] an on screen keyboard in pure LabVIEW brings some other problems.)
Should we vote for Touchpanel-Control-Suite-with-Native-LabVIEW-On-screen-Keyboard or is it different from our needs? (I'd prefer to have the functionality in all control styles, not only in a special "Touch Control" set. But maybe I misunderstand the idea.)
Greetings,
shb

New template field does not compute

I added a new template field in Address Book to hold custom data from another data base.
When I go to import the new data, the new field does not appear in the import wizard where you assign targets for imported data.
The 'stock' names offered in Card>Add Field do not match the wizard and even after I create a custom field in the Edit Template function, it doesn't show up as a target choice.
I thought about just using one offered then changing its name but they have masks, like phone number layouts. Any help?

Hi BW/BI Beginner:
1. Delete the data on your InfoCube.
2. Reactivate your Transfer Rules and InfoPackage.
3. Reload the data to your InfoCube.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 23, 2010 9:41 AM

TOC in French version of webhelp does not expand correctly

I have a RoboHelp project (RH 8.0.2.208) created by importing an HTML Help project that I use to generate WebHelp. The HTML files, the .hhc, .hhk, .hhp files have been translated to French (from English). I have changed the language in the project settings to French (France) and I generate the WebHelp output. All appears to process correctly except the TOC does not expand and collapse correctly. Some first level entries expand with one click (as expceted), some entries only expand after other entries have been expanded, and some entries will not expand at all, and once expanded, some entries will not collapse.
I have used the same process to generate other language versions and have not had the same issue. I have been searching the forum to see if similiar issues have been reported but cannot find anthing similar.

I had something a bit similar with RH 7, except it wasn't limited to one language but Firefox browsers. That problem was solved by installing the latest RH patches. You have a later version of RH and the problem is only in French, so the problem is most likely in the French help project.
What I'd do to troubleshoot it: Make spare copies of the help projects, just in case you make it worse and not better.
use a comparison tool like Beyond Compare, to compare the .hhp, .hhc and .js files between the French and English projects: any unexpected differences that are not language related? If there are unexpected differences in tags or other functional items, copy those items from the good project. Rebuild the project by opening the .hhp file.
or
Assuming your projects use the same file names for everything, copy the French .htm, .hhc and .hhk files into a spare copy of the English project. Open the project normally and change the language setting and help title (the .hhp should not have any other translated texts than the help title).
It can happen that a translation agency does something to the translated files, that does not work in your system. It can be very obvious in a side-by-side comparison, in a comparison tool or just Notepad, or it might be a bit more hidden like wrong character encoding.

Text box does not display the date??

I have a text box <input type="TEXT" name="invoiceDate" readonly></input>. I select the date using datepicker .The date gets displayed in the text box.Then i click on "Show" button which loads the same jsp page again.
When the page is loaded the text box does not show the date.
I try to save the date in the text box as
<% String date1=request.getParameter("invoiceDate");
<input type="hidden" name="date1" value="<%=date1 %>">
<%>
The value is saved in this hidden variable..
Plz help me what to do next
Thanks

Its a hidden field and that's why it isnt displayed.
Use
<input type="text" name="date1" value="<%=date1 %>"> ram.

I want to import bookmarks from Safari on the Mac same computer. Firefox help says Menu Bar/File/Import. My Firefox does not have File/Import option. How do I import bookmarks from Safari to Firefox?

I want to import bookmarks from Safari on the same Mac computer. Firefox
Help says use Menu Bar/File/Import.
My Firefox does not have File/Import option.
How do I import bookmarks from Safari to Firefox?

Import and Backup is the third (last) button on the toolbar in the Bookmarks Manager (Library) that looks like a star.<br />
Other platforms show the text label, but on Mac you only see toolbar icons.

FBV0 Error -- Message 00349 - Field does not exist on Screen

I am receiving the following error in FBV0 when I highlight a parked document and click POST. Please advise!
Field BSEG-FKBER_LONG. does not exist in the screen SAPMF05A 0332
Message no. 00349
Diagnosis
The specified field does not exist on the screen.
Procedure
Check your batch input data.

Hi
I too getting the same error message. Did you get any clue of why this error message comes. Mine long text shows as below
No batch input data for screen SAPMF05A 0332
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
I have parked document of arround 500 t0 600 documents. Already processed around 50+ documents. I am getting error in only one document. I have verified all the inputs in this document but no problem with the datas. This seems to be bit strange.
Regards,
Deva

Delete records in itab1 where key fields does not exit in itab2 w/o Loop

Hi,
I am trying to find the most efficient way to compare two internal tables and filter out (delete) the entries in Internal Table 1 (ITAB1) where the key fields does not exist in internal table 2 (ITAB2).
Here is the codes using the Loop.
Loop at itab1.
read table itab2 where field1 = itab1-field1 and field2 = itab1-field2.
if sy-subrc ne 0.
delete itab1 where field1 = itab1-field1 and field2 = itab-field2.
endif.
endloop.
Instead of looping thru each record of ITAB1, is there a way to use the "DELETE" or other efficient way? This is in ECC 6.0.
Thanks for any advice in advance.

Not sure if its possible without using even a single loop. Though you can avoid the read statement this way
loop at itab2.
delete itab1 where field1 NE itab2-field1 and field2 NE itab2-field2.
endloop.

Text Field is not displaying in MIRO , Screen Variant SHD0

Hi,
All Experts.
In my client TEXT field is not there in MIRO T.code. I heard Screen Variant can be a good option for adding field in MIRO.
Or is there any work around to bring TEXT ( SGTXT ) field in MIRO ?
I gone through the already posted threads regarding this, unfortunately no any perfect solution found.
Experts help will be great on this.
Regards,
Sharvari Joshi.

Hi,
Go to SHD0 and enter transaction code as MIRO
Then in first tab "Standard variant", sub tab "Standard Variants", do F4 on the field "Name"
You will get the list of the standard Variants for MIRO.
Then select one of them and press enter. It the "Activate Match Stick" is enables, that means that standard variant is not activated yet. Similarily check for other standard variants of MIRO.
If all the standard variant have "Activate Match Stick" enabled, then SAP MIRO should be showing SGTXT as a part of standard SAP.
Regards,
SDNer

IOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange. Any solutions?

iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
Open the VCS file, this will create a Calendar entry in your Outlook,
Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
Delete original VCS-created appointment in your calendar to avoid multiple calendar.
Open the re-saved ICS file.
Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
Open the VCS file, this will create a Calendar entry in your Outlook,
Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
Delete original VCS-created appointment in your calendar to avoid multiple calendar.
Open the re-saved ICS file.
Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

For Acrobat 9. TouchUp Text tool does not work.

Acrobat 9. TouchUp text tool does not work --- even on documents created with my computer using installed fonts. Problem 2: when trying to export to Word 2010 there is no option for format .dox, only .doc which belonged to earlier versions of Word.

Hi Begin,
I have the same issue, I am not sure which version so I had on my old computer but when I got a new windows 7 64bit, and asked IT to install Adobe, my life turned upside down. now they asked if I need X or 9pro and I though 9pro is the latest and greatest.. they installed the standard first then could not edit then asked for the pro and could not edit ... now I search and maybe version X will edit but if the document is signed and we do need to do lots of editing after the signature then what is the solution??
I hope the Guru in Adobe can help here soon please :-)!!
Joseph

Go - Connect to Server does NOT work - The text entered does not appear to

Two Macs with Mac OS X 10.5.2. Both migrated from Mac OS X 10.4.11. One Mactel and one PowerPC. I can see the former from the latter, but not the latter from the former:
Go/Connect to Server
gives this error all the time for all listed servers:
The text entered does not appear to be a recognized URL format
This does not help:
Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server
http://docs.info.apple.com/article.html?artnum=307256
Any idea how to fix it? Thanks.

At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
I'd do it on all of them.
Then we can go on from there if you still have a problem, but with several queastions eliminated!

Newly added field does not show in table genarator.

Hi,
I have added one more field to my custom table.
When I make new entries in table maintanance, the new field does not show up.
Thank U for Ur time.
Cheers,
Sam

hai sam raj,
first activate your database table .
if any error occurs better you go to
se14(database utility) -
>give table name in object and select the table check box and click the edit push button.
and then click activate and adjust pushbutton.
surely you ll get some idea.
reward points if those idea helps.
thanks,
velu.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

Text field does not expand in imported template

Similar Messages

Maybe you are looking for