Text File - XI - BAPI Call
Hi,
i have one(!) text file with data from different customers (header and items). A new customer starts with a new header and a new customer number.
i want to call a bapi for every single customer number - that means for every header/item combination.
So if the customer number changes in the text file i want to call a bapi and after that i want to process the rest of the text file and call the bapi for the next customer and so on...
How can i do that?
Hi,
take a look at my previous response:
Re: Working with a file that contains several IDocs
this may help you
Regards,
michal
Similar Messages
-
Down load or create text file using bapi
hi friends,
My requirement is to create text file or down load text file in presentation server when the bapi runs in which the ip address is defined at the interface.
plz sujjest me,
points will be rewarded .
prasad.Hi,
The FM 'GUI_DOWNLOAD' should use the network path like '
10.10.10.10\shared_file\PO.txt'. Pass this value to the file path parameter and execute the program.
Thanks..
Preetham S -
Text file is sent empty through mail.
Hello,
I have the output from BART piped to a text file, let's called it "report".
Whenever I try
mail [email protected] < report
I get an empty email.
If I send any other text file like that, I get the file content no problems.
Any ideas?Taking a random shot at this:
1. vi the file and see if there are any control characters within the file. ( "set list" should show all control characters within vi) If there are, then mime encode the file (uuencode or such thing) and send that output file via mail to check if you receive it.
2. If you are not familiar with uuencode or other mine encoding software, use pine or elm to do it for you. Of course this is just to check if the issue is with encoding, once you have that out of the picture, you can always go back to mail and script the whole thing out.
-GGR -
How to call text file using Script in Data Integrator
Dear All,
Can any one assit me in how to call a text file using script with the help of Data Integrator.
and one question ?
M having 32 csv files i want to club thos 32 csv files into one table with the help of Data Integrator, can
any one assist me.mary,
since you knew the file name ,when clicked in name send to server,read the file and write to servlet outputstream.
I think this would help you.
If anything wrong in mycode ..forums will help you further
BufferedInputStream bis=null;
BufferedOutputStream bos=null;
int bytesRead=0;
byte buff[]=new byte[1024];
File f=new File(test.txt);
try{
bis= new BufferedInputStream(new FileInputStream(f));
bytesRead=bis.read(buff,0,buff.length);
if(bytesRead!=-1){
// create a BufferedOutputStream from ServletOutputStream
bos=new BufferedInputStream(response.getOutputStream());
do{
bos.write(buff,0,bytesRead);
}while((bytesRead=bis.read(buff,0,buff.length))!=-1)
}catch(Exception e){
////error handling
} -
Using java to call a text file
I am new to java and was wondering if there is a way of using java to call a text file on my server and use it to create a webpage using a template. Namely to click a link to a poem, and have the java automatically create a page from a text file of the poetry. I need to know if this is even possible, what I would need to look into, (IE: which software or applet to look for), and if there are any sites that anyone knows about that I could learn how to do this. currently I am having to create a page for every poem posted on my site, which takes a great deal of time, and I would like to speed the process up a bit if it is possible. Any suggestions would be greatly appreciated.
Why a text file? I don't think it is a best practice of doing that. Just use a database, keep your poem collections there, and set up a jsp page that seek the database, and then display it on another jsp page. I guess you can find similar application in the sample projects provided by JSC.
-
Hi all,
I can call html or jsp file from jsp file, but how can I call text file in jsp, I put my text file same lever asmy jsp file it don't work!
where I should put the text file??
thank youmary,
since you knew the file name ,when clicked in name send to server,read the file and write to servlet outputstream.
I think this would help you.
If anything wrong in mycode ..forums will help you further
BufferedInputStream bis=null;
BufferedOutputStream bos=null;
int bytesRead=0;
byte buff[]=new byte[1024];
File f=new File(test.txt);
try{
bis= new BufferedInputStream(new FileInputStream(f));
bytesRead=bis.read(buff,0,buff.length);
if(bytesRead!=-1){
// create a BufferedOutputStream from ServletOutputStream
bos=new BufferedInputStream(response.getOutputStream());
do{
bos.write(buff,0,bytesRead);
}while((bytesRead=bis.read(buff,0,buff.length))!=-1)
}catch(Exception e){
////error handling
} -
Text file called BlackBackground.plist??
After I upgraded to Mountain Lion, every time I start up the machine I get a text file that opens up on my desktop called BlackBackground.plist. I tried to search for it on my HD but nothing shows up. I can't track it down and can't delete it. Anybody know what and why this is happening? Thanks.
May be you have "automatic restore" window set up in 10.6 / Safari Preference
"Tip: To open Safari without resume, hold down the shift key (⇧) as you open Safari. Safari will then open with the options you selected in the "General" tab of Safari preferences, options like your homepage.
In Mac OS X v10.6 and Microsoft Windows, you can choose to have Safari automatically restore your windows in the "General" tab of Safari preferences."
Source: http://support.apple.com/kb/ht4550
I noticed that you have 10.6 installed. That is why I used "may".
Best. -
Importing Data from SQL DB or Text File to Call Manager 8.5.1
Hi Everyone,
I would like to import from an external DB or text file, what have you, the Employees Single reach Number to Call Manager. Please let me know your suggestions.
ThanksI don't see why not. This additional requirement would likely require you go the AXL API route so that you can remove unnecessary manual steps. If you are looking for a "trigger" event, then that would be trickier. You may be able to craft something from audit logs or tomcat logs but I don't know if that would be worth the headache. It would require some additional thought.
You could do a scheduled sync. You will need to ensure you understand all database dependencies and account for some of the additional end user customizations (like time of day and allow lists). The database schema (data dictionary) for your version is here:
www.cisco.com/en/US/docs/voice_ip_comm/cucm/datadict/8_5_1/datadictionary_851.pdf
HTH.
Regards,
Bill
please rate helpful posts -
Two bapi calls in the same session using PI
Hi,
I have a file to RFC scenario wherein I need to call a BAPI (L_TO_CANCEL) and then again, I need to call another bapi called
"BAPI_TRANSACTION_COMMIT" in the same session. My question is, if I use RFC adapter, do I have to call the commit bapi again?
If yes, is there anyway I can do that ?
I believe that will be the case only if I use a proxy. Is that correct ?
The requirement is to call these two BAPIs and finally include a success or error message in the response.
Thanks.Inside the BPM you do not have a specific exception message. You can do an exception handling based on the exception, but the excpetion itself is not a real message.
If you want a real message, you could create an ABAP proxy, which has a message like this:
root
- part1
- rfc response
- part2
- error text
then you can split this inside BPM and send a the response or the error.
Of course there are other possible solutions. -
Address book .... importing text file
I am designing an address book which opens a text file called AddressBook.txt which reads in the information in the following format:
lastname,firstname,street,city,state,zip,phonenumber,birthday,persontype
lastname2,firstname2,street2,city2,state2,zip2,phonenumber2,birthday2,persontype2
etc. (with a maximum entries of 500)
I am having a problem reading in the information without the commas and wrapping to the next line. I can either use the BufferedReader or Scanner to input the file and as you can see below, my code is not complete yet. I can't figure out how to code the storeAddress() method in order to get the addressBookEntries[] to include the necessary information for outputting, sorting, etc. If I can get the information read into the addressBookEntries[], I think I will probably be able to proceed in the rest of the required tasks (i.e. sorting by last name, searching by last name, etc.)
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
import java.util.*;
import java.text.SimpleDateFormat;
import java.io.*;
import java.lang.*;
* @created September 14, 2004
* This program uses a JFrame to manipulate data and form an
* address book. The user will be able to load data from a file,
* sort it by last name, print the address, phone number, and date
* of birth, print the names of people whos birthday are between 2
* dates, print the names of people between 2 last names, and/or
* print the names of different person types.
public class AddressBook extends JPanel implements ActionListener{
JFrame frame;
final int numButtons = 7;
JRadioButton[] radioButtons = new JRadioButton[numButtons];
JButton process = new JButton("Process Request");
JLabel title;
JTextArea output = new JTextArea(30,50);
int MAX_ADDRESS_ENTRIES = 500;
AddressBookEntry addressBookEntries[] =
new AddressBookEntry[MAX_ADDRESS_ENTRIES];
String FILE_NAME="AddressBook.txt";
public AddressBook(JFrame frame){
super(new BorderLayout());
this.frame=frame;
JPanel choicePanel = createSimpleDialogBox();
choicePanel.setBorder(BorderFactory.createTitledBorder("Choices" +
" to choose from:"));
title = new JLabel("<html><h2> Thank you for opening the " +
"Address Book. " +
"Please Press the \"Process Request\" " +
"after making a choice.</h2></html>\n",JLabel.CENTER);
title.setBorder(BorderFactory.createEmptyBorder(20,20,20,20));
output.setEditable(false);
add(title, BorderLayout.NORTH);
add(choicePanel, BorderLayout.CENTER);
add(output, BorderLayout.SOUTH);
final ButtonGroup group = new ButtonGroup();
final String saveCommand = "Save";
final String sortByLN = "Sort by Last Name";
final String searchLNCommand = "Search By Last Name";
final String printAPD = "Print address, phone number, and DOB";
final String printNamesDOB = "Print names of people whose birthday" +
" falls between 2 dates";
final String printNamesLN = "Print names of people who fall" +
" between 2 last names";
final String printPType = "Print all family members, friends, or" +
" business associates";
private JPanel createSimpleDialogBox(){
radioButtons[0] = new JRadioButton(
"<html>Save the address file</html>");
radioButtons[0].setActionCommand(saveCommand);
radioButtons[1] = new JRadioButton(
"<html>Sort the address file by last name</html>");
radioButtons[1].setActionCommand(sortByLN);
radioButtons[2] = new JRadioButton(
"<html>Search the address file by last name</html>");
radioButtons[2].setActionCommand(searchLNCommand);
radioButtons[3] = new JRadioButton(
"<html>Print the address, phone number, and DOB of a specified" +
" person</html>");
radioButtons[3].setActionCommand(printAPD);
radioButtons[4] = new JRadioButton(
"<html>Print the names of people whose birthday falls between" +
" two dates</html>");
radioButtons[4].setActionCommand(printNamesDOB);
radioButtons[5] = new JRadioButton(
"<html>Print the names of people who fall between two" +
" specified last names</html>");
radioButtons[5].setActionCommand(printNamesLN);
radioButtons[6] = new JRadioButton(
"<html>Print all family members, friends, <u>OR</u>" +
" business associates</html>");
radioButtons[6].setActionCommand(printPType);
for (int i=0; i<numButtons; i++){
group.add(radioButtons);
//set the first button (open file) to be selected
radioButtons[0].setSelected(true);
return createPane(radioButtons, process);
private JPanel createPane(JRadioButton[] radioButtons,
JButton showButton) {
int numChoices = radioButtons.length;
JPanel box = new JPanel();
box.setLayout(new BoxLayout(box, BoxLayout.PAGE_AXIS));
for (int i = 0; i < numChoices; i++) {
box.add(radioButtons[i]);
JPanel pane = new JPanel(new BorderLayout());
pane.add(box, BorderLayout.NORTH);
pane.add(showButton, BorderLayout.SOUTH);
return pane;
public void actionPerformed(ActionEvent e) {
String command = group.getSelection().getActionCommand();
//else if button pushed is save
if (command == saveCommand){
// save file
//else if button pushed is search by last name
else if (command == sortByLN){
// search by last name
//else if button pushed is sort by last name
else if (command == searchLNCommand){
// sort by last name
// print to screen
//else if button pushed is display address, ph#, dob
else if (command == printAPD){
// display "search by last name" dialog
// search last names
// if last name found
// print data
// else
// print error notification "person not found"
//else if button pushed is list names of people whose
//bday between 2 days
else if (command == printNamesDOB){
// ask for which dates
// search bday
// print to screen
//else if button pushed is print names of people between 2 last names
else if (command == printNamesDOB){
// ask for which two last names
// search last names
// if people found
// print to screen
//else
//print error notification "no one found"
//else if button pushed is print all family members, friends
//or business associates
else if (command == printPType){
//ask for what person type
//search person types
//if people found
//print to screen
//else print "no one found"
public void storeAddress(File addressFile){
Scanner sc=null;
String lname,fname,street,city,state,zip,phone,persontype,bday;
try {
// Delimiters specifiy where to parse tokens in a scanner
sc = new Scanner(addressFile).useDelimiter("\\s*[\\p{,}*\\s+]\\s*");
catch (FileNotFoundException fnfe) {
JOptionPane.showMessageDialog(this,"Could not open the file");
System.exit(-1);
for(int i=0; i<MAX_ADDRESS_ENTRIES; i++){
while (sc.hasNext()) {
lname=(sc.next());
if (!lname.equals("")){
addressBookEntries[i].setLName()=lname;
public class AddressBookEntry{
private extPerson address;
private String date;
private extPerson ExtPerson;
public class Person{
protected String lastName, firstName;
private String address;
private String city;
private String state;
private String zipcode;
private String homephone;
private String extPersonType;
private Date bday;
SimpleDateFormat dateFormat = new SimpleDateFormat("yyyy-mm-DD");
public String toString() {
return lastName+" "+firstName;
public void setLName(String last) {
lastName=last;
public void setFName(String first){
firstName=first;
public String getLastName() {
return lastName;
public String getFirstName() {
return lastName;
public Person() {
lastName="";
firstName="";
public Person(String first, String last){
setLName(last);
setFName(first);
//Set the address and return it
public void setAddress( String addr ){
address = addr;
public String getAddress(){
return address;
//set the city and return it
public void setCity( String town ){
city = town;
public String getCity(){
return city;
//set the state and return it
public void setState( String st )
state = st;
public String getState()
return state;
//Set the zip code and return it
public void setZipCode( String zip ){
zipcode = zip;
public String getZipCode(){
return zipcode;
//Set the home phone and return it
public void setHomePhone( String homeph ){
homephone = homeph;
public String getHomePhone(){
return homephone;
//Set the bday and return it
public Date getBday(){
return bday;
public void setBday(Date newBday) {
bday = newBday;
dateFormat.format(bday);
//Set the extPerson type and return it
public String getPType(){
return extPersonType;
public void setPBusiness(){
extPersonType = "Business Associate";
public void setPFamily(){
extPersonType = "Family Member";
public void setPFriend(){
extPersonType = "Friend";
public class extPerson extends Person{
//new clss People
public class People {
int MAX_PEOPLE=500;
BufferedReader bf;
public String toString() {
StringBuffer sb=new StringBuffer();
for (int i=0; i<nPeople; i++)
sb=sb.append(group[i]+"\n");
return sb.toString();
public void read(){
String str;
try {
bf=new BufferedReader(new FileReader(new File(FILE_NAME)));
str=bf.readLine();
while (str!=null) {
insert(str);
str=bf.readLine();
catch (IOException e) {
// Will jump to here on an eof condition.
try {
bf.close();
catch (IOException e) {}
public void save() {
try {
PrintWriter pw=new PrintWriter(FILE_NAME);
for (int i=0; i<nPeople; i++)
pw.println(group[i]+",");
pw.close();
catch (FileNotFoundException fne) {
System.out.println("Could not Save "+FILE_NAME);
public People() {
group=new extPerson[MAX_PEOPLE];
nPeople=0;
public boolean insert(String data) {
if (nPeople<MAX_PEOPLE) {
//extPerson guy=new extPerson(data);
//group[nPeople]=guy;
nPeople++;
return true;
else {
JOptionPane.showMessageDialog(null,"Error in People" +
"::insert: Max size reached.");
return false;
public void clear() {
// This loop frees up the memory used by each extPerson
for (int i=0; i<nPeople; i++)
group[i]=null;
nPeople=0;
extPerson group[];
int nPeople;
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
public static void createAndShowGUI(){
JFrame.setDefaultLookAndFeelDecorated(true);
JDialog.setDefaultLookAndFeelDecorated(true);
JFrame frame = new JFrame("Address Book Program");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Container c = frame.getContentPane();
c.add(new AddressBook(frame));
frame.pack();
frame.setVisible(true);
public static void main (String s[]){
//Schedule a job for the event-dispatching thread:
//creating and showign this application's GUI
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();Ok, I have changed my code to reflect your suggested changes, but I'm still unsure how to use the findInLine you suggested.... This is all very new to me and I've been looking on the java website for suggestions, but I'm still stumped on how to pull this together. I'm unsure on how to set the lastname,firstname,etc. for retrieval...
Here's my code:
//ADDRESS BOOK
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
import java.util.*;
import java.text.SimpleDateFormat;
import java.io.*;
import java.lang.*;
* @created September 14, 2004
* This program uses a JFrame to manipulate data and form an
* address book. The user will be able to load data from a file,
* sort it by last name, print the address, phone number, and date
* of birth, print the names of people whos birthday are between 2
* dates, print the names of people between 2 last names, and/or
* print the names of different person types.
public class AddressBook extends JPanel implements ActionListener{
JFrame frame;
final int numButtons = 7;
JRadioButton[] radioButtons = new JRadioButton[numButtons];
JButton process = new JButton("Process Request");
JLabel title;
JTextArea output = new JTextArea(30,50);
int MAX_ADDRESS_ENTRIES = 500;
AddressBookEntry addressBookEntries[] = new
AddressBookEntry[MAX_ADDRESS_ENTRIES];
public AddressBook(JFrame frame){
super(new BorderLayout());
this.frame=frame;
JPanel choicePanel = createSimpleDialogBox();
choicePanel.setBorder(BorderFactory.createTitledBorder("Choices" +
" to choose from:"));
title = new JLabel("<html><h2> Thank you for opening the " +
"Address Book. " +
"Please Press the \"Process Request\" " +
"after making a choice.</h2></html>\n",JLabel.CENTER);
title.setBorder(BorderFactory.createEmptyBorder(20,20,20,20));
output.setEditable(false);
add(title, BorderLayout.NORTH);
add(choicePanel, BorderLayout.CENTER);
add(output, BorderLayout.SOUTH);
final ButtonGroup group = new ButtonGroup();
final String saveCommand = "Save";
final String sortByLN = "Sort by Last Name";
final String searchLNCommand = "Search By Last Name";
final String printAPD = "Print address, phone number, and DOB";
final String printNamesDOB = "Print names of people whose birthday" +
" falls between 2 dates";
final String printNamesLN = "Print names of people who fall" +
" between 2 last names";
final String printPType = "Print all family members, friends, or" +
" business associates";
private JPanel createSimpleDialogBox(){
radioButtons[0] = new JRadioButton(
"<html>Save the address file</html>");
radioButtons[0].setActionCommand(saveCommand);
radioButtons[1] = new JRadioButton(
"<html>Sort the address file by last name</html>");
radioButtons[1].setActionCommand(sortByLN);
radioButtons[2] = new JRadioButton(
"<html>Search the address file by last name</html>");
radioButtons[2].setActionCommand(searchLNCommand);
radioButtons[3] = new JRadioButton(
"<html>Print the address, phone number, and DOB of a specified" +
" person</html>");
radioButtons[3].setActionCommand(printAPD);
radioButtons[4] = new JRadioButton(
"<html>Print the names of people whose birthday falls between" +
" two dates</html>");
radioButtons[4].setActionCommand(printNamesDOB);
radioButtons[5] = new JRadioButton(
"<html>Print the names of people who fall between two" +
" specified last names</html>");
radioButtons[5].setActionCommand(printNamesLN);
radioButtons[6] = new JRadioButton(
"<html>Print all family members, friends, <u>OR</u>" +
" business associates</html>");
radioButtons[6].setActionCommand(printPType);
for (int i=0; i<numButtons; i++){
group.add(radioButtons);
//set the first button (open file) to be selected
radioButtons[0].setSelected(true);
return createPane(radioButtons, process);
private JPanel createPane(JRadioButton[] radioButtons,
JButton showButton) {
int numChoices = radioButtons.length;
JPanel box = new JPanel();
box.setLayout(new BoxLayout(box, BoxLayout.PAGE_AXIS));
for (int i = 0; i < numChoices; i++) {
box.add(radioButtons[i]);
JPanel pane = new JPanel(new BorderLayout());
pane.add(box, BorderLayout.NORTH);
pane.add(showButton, BorderLayout.SOUTH);
return pane;
public void actionPerformed(ActionEvent e) {
String command = group.getSelection().getActionCommand();
//else if button pushed is save
if (command == saveCommand){
// save file
//else if button pushed is search by last name
else if (command == sortByLN){
// search by last name
//else if button pushed is sort by last name
else if (command == searchLNCommand){
// sort by last name
// print to screen
//else if button pushed is display address, ph#, dob
else if (command == printAPD){
// display "search by last name" dialog
// search last names
// if last name found
// print data
// else
// print error notification "person not found"
//else if button pushed is list names of people whose
//bday between 2 days
else if (command == printNamesDOB){
// ask for which dates
// search bday
// print to screen
//else if button pushed is print names of people between 2 last names
else if (command == printNamesDOB){
// ask for which two last names
// search last names
// if people found
// print to screen
//else
//print error notification "no one found"
//else if button pushed is print all family members, friends
//or business associates
else if (command == printPType){
//ask for what person type
//search person types
//if people found
//print to screen
//else print "no one found"
public class AddressBookEntry{
private extPerson address;
private String date;
private extPerson ExtPerson;
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
public static void createAndShowGUI(){
JFrame.setDefaultLookAndFeelDecorated(true);
JDialog.setDefaultLookAndFeelDecorated(true);
JFrame frame = new JFrame("Address Book Program");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Container c = frame.getContentPane();
c.add(new AddressBook(frame));
frame.pack();
frame.setVisible(true);
public static void main (String s[]){
//Schedule a job for the event-dispatching thread:
//creating and showign this application's GUI
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
//PERSON
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
import java.util.*;
import java.text.SimpleDateFormat;
import java.io.*;
import java.lang.*;
public class Person{
protected String lastName, firstName;
private String address;
private String city;
private String state;
private String zipcode;
private String homephone;
private String extPersonType;
private String bday;
SimpleDateFormat dateFormat = new SimpleDateFormat("yyyy-mm-DD");
public void parseString(String s) {
try {
lastName = s.substring(0,s.indexOf(","));
firstName = s.substring(s.indexOf(",")+1);
address = s.substring(s.indexOf(",")+2);
city = s.substring(s.indexOf(",")+3);
state = s.substring(s.indexOf(",")+4);
zipcode = s.substring(s.indexOf(",")+5);
homephone = s.substring(s.indexOf(",")+6);
extPersonType = s.substring(s.indexOf(",")+7);
bday = s.substring(s.indexOf(",")+8);
catch(StringIndexOutOfBoundsException sbe) {
JOptionPane.showMessageDialog(null,"Error " +
"in Person: Could not parse the line "+s);
public String toString() {
return lastName+","+firstName+","+address+","+city+","+
state+","+zipcode+","+homephone+","+bday+","+extPersonType;
public void setLName(String last) {
lastName=last;
public void setFName(String first){
firstName=first;
public String getLastName() {
return lastName;
public String getFirstName() {
return lastName;
public Person() {
lastName="";
firstName="";
public Person(String first, String last){
setLName(last);
setFName(first);
//Set the address and return it
public void setAddress( String addr ){
address = addr;
public String getAddress(){
return address;
//set the city and return it
public void setCity( String town ){
city = town;
public String getCity(){
return city;
//set the state and return it
public void setState( String st )
state = st;
public String getState()
return state;
//Set the zip code and return it
public void setZipCode( String zip ){
zipcode = zip;
public String getZipCode(){
return zipcode;
//Set the home phone and return it
public void setHomePhone( String homeph ){
homephone = homeph;
public String getHomePhone(){
return homephone;
//Set the bday and return it
public String getBday(){
return bday;
public void setBday(String newBday) {
bday = newBday;
dateFormat.format(bday);
//Set the extPerson type and return it
public String getPType(){
return extPersonType;
public void setPBusiness(){
extPersonType = "Business Associate";
public void setPFamily(){
extPersonType = "Family Member";
public void setPFriend(){
extPersonType = "Friend";
public Person(String data) {
parseString(data);
//EXTPERSON
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
import java.util.*;
import java.text.SimpleDateFormat;
import java.io.*;
import java.lang.*;
//new clss extPerson
public class extPerson extends Person {
int MAX_PEOPLE=500;
BufferedReader bf;
String lname,fname,street,city,state,zip,phone,persontype,bday;
String FILE_NAME="AddressBook.txt";
public String toString() {
StringBuffer sb=new StringBuffer();
for (int i=0; i<nPeople; i++)
sb=sb.append(group1[i]+"\n");
return sb.toString();
public void save() {
try {
PrintWriter pw=new PrintWriter(FILE_NAME);
for (int i=0; i<nPeople; i++)
pw.println(group1[i]+",");
pw.close();
catch (FileNotFoundException fne) {
System.out.println("Could not Save "+FILE_NAME);
public extPerson() {
group1=new extPerson[MAX_PEOPLE];
nPeople=0;
public boolean insert(String data) {
if (nPeople<MAX_PEOPLE) {
Person guy = new Person(data);
group1[nPeople]=guy;
nPeople++;
return true;
else {
JOptionPane.showMessageDialog(null,"Error in People" +
"::insert: Max size reached.");
return false;
Person group1[];
int nPeople; -
Attaching text file using SO_NEW_DOCUMENT_ATT_SEND_API1
hello guys, i'm a newbie here.
I'm having trouble attaching an existing text file using function 'SO_NEW_DOCUMENT_ATT_SEND_API1'. It seems i can't find the right combination of parameters that are being passed to this function.
first, i'm using WS_UPLOAD to upload the text file to an internal table then i'm creating all the neccessary internal tables that will be use by this function..
By the way, i'm trying to send mail w/ attachments to external mail and SAPids. Below is my code.
REPORT ZHR_TESTEMAIL .
TABLES: USR02, PA0105, SOSU, SOUC, RLGRAP, IBIPPARMS, DYNPREAD, RSCSEL.
DATA: FOLD_YR(2) TYPE C,
FOLD_TYPE(3) TYPE C,
G_HEADER LIKE SOOD2,
G_FOLMAM LIKE SOFM2,
METHOD1 LIKE SY-UCOMM,
G_DOCUMENT LIKE SOOD4,
G_USER LIKE SOUDNAMEI1,
FOLD_NUMBER(12) TYPE C,
G_NEW_PARENT LIKE SOODK,
G_OWNER LIKE SOUD-USRNAM,
G_REF_DOCUMENT LIKE SOOD4,
G_USER_DATA LIKE SOUDATAI1,
G_AUTHORITY LIKE SOFA-USRACC,
G_OBJCNT LIKE SOLI OCCURS 0 WITH HEADER LINE,
G_OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE,
G_OBJPARA LIKE SELC OCCURS 0 WITH HEADER LINE,
G_OBJPARB LIKE SOOP1 OCCURS 0 WITH HEADER LINE,
G_RECIPIENTS LIKE SOOS1 OCCURS 0 WITH HEADER LINE,
G_REFERENCES LIKE SOXRL OCCURS 0 WITH HEADER LINE,
G_ATTACHMENTS LIKE SOOD5 OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF G_FILES OCCURS 10 ,
TEXT(4096) TYPE C,
END OF G_FILES.
DATA: BEGIN OF IT_WS_FILE OCCURS 0,
WS_FILE LIKE RLGRAP-FILENAME,
END OF IT_WS_FILE.
DATA: BEGIN OF IT_SAPID OCCURS 0,
SAPID LIKE USR02-BNAME,
END OF IT_SAPID.
DATA: BEGIN OF IT_EMAIL OCCURS 0,
EMAILADD LIKE PA0105-USRID_LONG,
END OF IT_EMAIL.
DATA: BEGIN OF IT_TSP01 OCCURS 0.
INCLUDE STRUCTURE TSP01.
DATA: END OF IT_TSP01.
DATA: BEGIN OF TAB2 OCCURS 50,
TEXT(200) TYPE C,
END OF TAB2.
DATA: V_DOCDATA TYPE SODOCCHGI1,
V_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
V_OBJHEAD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
V_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
V_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
V_OBJHEX LIKE SOLIX OCCURS 0 WITH HEADER LINE,
IT_RECVRS TYPE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
IT_CONTNT TYPE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_BODY LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
V_TLIN TYPE I,
V_LINE TYPE I.
DATA: BEGIN OF IT_TEXTLINE OCCURS 500,
TEXTLINE(5000),
END OF IT_TEXTLINE.
DATA: FYL LIKE RLGRAP-FILENAME,
GV_SUBNO LIKE SOSU-SUBNO,
GV_EMAIL LIKE PA0105-USRID_LONG,
GV_NEXTDAY LIKE SY-DATUM,
YEAR(4) TYPE C,
RECFLAG TYPE C.
SELECTION-SCREEN BEGIN OF BLOCK PARAM WITH FRAME TITLE TEXT-001.
PARAMETERS: SUBJ(254) TYPE C OBLIGATORY, "Subject
DESC(254) TYPE C. "Message
SELECT-OPTIONS: SAPID FOR USR02-BNAME NO INTERVALS. "Recipient's SAP ID
SELECT-OPTIONS: EMAILADD FOR PA0105-USRID_LONG NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM.
SELECTION-SCREEN BEGIN OF BLOCK PARAM2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: WS_FILE FOR DYNPREAD-FIELDNAME NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM2.
SELECTION-SCREEN BEGIN OF BLOCK PARAM3 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT1 RADIOBUTTON GROUP A USER-COMMAND BUT. "Local PC
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT2 RADIOBUTTON GROUP A. "Server
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT3 RADIOBUTTON GROUP A. "Spool
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT3.
PARAMETERS: SPOOLNUM LIKE RSPOTYPE-RQNUMBER. "Spool Number
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PARAM3.
SELECTION-SCREEN BEGIN OF BLOCK PROC WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER: BPROC AS CHECKBOX USER-COMMAND BCK. "Background Processing
SELECTION-SCREEN COMMENT 5(50) FOR FIELD BPROC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PROC.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR WS_FILE-LOW.
DATA: WS_FILE_TEMP TYPE IBIPPARMS-PATH.
CLEAR: WS_FILE_TEMP.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SY-REPID
DYNPRO_NUMBER = SY-DYNNR
FIELD_NAME = 'WS_FILE'
IMPORTING
FILE_NAME = WS_FILE_TEMP.
WS_FILE-LOW = WS_FILE_TEMP.
AT SELECTION-SCREEN.
SELECT SAPNAM FROM SOUC
INTO TABLE IT_SAPID
WHERE SAPNAM IN SAPID
AND DELETED = ''.
GV_NEXTDAY = SY-DATUM + 1.
LOOP AT EMAILADD.
IT_EMAIL-EMAILADD = EMAILADD-LOW.
APPEND IT_EMAIL.
CLEAR: IT_EMAIL.
ENDLOOP.
IF NOT BPROC IS INITIAL.
CLEAR: RBUT1, RBUT3.
RBUT2 = 'X'.
ELSE.
CLEAR: RBUT2.
ENDIF.
IF NOT RBUT3 IS INITIAL.
REFRESH: WS_FILE.
ENDIF.
IF SAPID IS INITIAL AND EMAILADD IS INITIAL.
MESSAGE E000(ZZ) WITH TEXT-201.
ELSEIF NOT SAPID IS INITIAL AND EMAILADD IS INITIAL.
CLEAR IT_SAPID.
READ TABLE IT_SAPID.
SELECT SINGLE SUBNO FROM SOSU
INTO GV_SUBNO
WHERE USRNO IN ( SELECT USRNO FROM SOUC
WHERE SAPNAM = IT_SAPID-SAPID ).
IF SY-SUBRC NE 0.
MESSAGE E000(ZZ) WITH TEXT-202.
ENDIF.
CLEAR: IT_SAPID.
ELSEIF NOT SAPID IS INITIAL AND NOT EMAILADD IS INITIAL.
CLEAR: IT_SAPID, IT_EMAIL.
READ TABLE IT_SAPID.
READ TABLE IT_EMAIL.
SELECT SINGLE SUBNO FROM SOSU
INTO GV_SUBNO
WHERE USRNO IN ( SELECT USRNO FROM SOUC
WHERE SAPNAM = IT_SAPID-SAPID ).
IF SY-SUBRC NE 0.
SUBMIT RSSOADM0 WITH USRNAM EQ IT_SAPID-SAPID
WITH NEW_SUBS EQ IT_EMAIL-EMAILADD
WITH SUB_ESC EQ 'U'
WITH EDAT EQ SY-DATUM
WITH BDAT EQ SY-DATUM
WITH BDAT EQ GV_NEXTDAY
WITH EDAT EQ '99991231'
WITH BTIM EQ SY-UZEIT
WITH ETIM EQ '240000'
WITH FORW_ALL EQ 'X'
WITH PSTHR2 EQ ''
AND RETURN.
ENDIF.
CLEAR: IT_SAPID.
ELSEIF NOT EMAILADD IS INITIAL AND SAPID IS INITIAL.
RECFLAG = 'X'.
ENDIF.
START-OF-SELECTION.
PERFORM B_SENDMAIL.
FORM B_SENDMAIL.
YEAR = SY-DATUM+0(4).
LOOP AT WS_FILE.
CLEAR: FYL.
FYL = WS_FILE-LOW.
REFRESH: TAB2.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FYL
FILETYPE = 'BIN'
TABLES
DATA_TAB = TAB2.
IT_TEXTLINE[] = TAB2[].
DOCUMENT_DATA (SUBJECT OF MAIL)
V_DOCDATA-OBJ_NAME = DESC.
V_DOCDATA-OBJ_DESCR = SUBJ.
V_DOCDATA-OBJ_LANGU = SY-LANGU.
V_DOCDATA-SENSITIVTY = 'C'.
V_DOCDATA-OBJ_PRIO = '1'.
BODY OF MAIL
IT_BODY-LINE = 'Collection Report'.
APPEND IT_BODY.
CONTENTS_TXT (Attachments)
IT_CONTNT[] = IT_TEXTLINE[].
DESCRIBE TABLE IT_CONTNT LINES V_LINE.
READ TABLE IT_CONTNT INDEX V_LINE.
PACKING_LIST
V_OBJPACK-DOC_SIZE = ( V_LINE - 1 ) * 255 + STRLEN( IT_CONTNT ).
V_OBJPACK-TRANSF_BIN = 'X'.
V_OBJPACK-HEAD_START = 1.
V_OBJPACK-HEAD_NUM = 0.
V_OBJPACK-BODY_START = 1.
V_OBJPACK-BODY_NUM = V_LINE.
V_OBJPACK-DOC_TYPE = 'TXT'.
V_OBJPACK-OBJ_NAME = 'ATTACHMENT'.
V_OBJPACK-OBJ_DESCR = 'Attached Document'.
APPEND V_OBJPACK.
CLEAR V_OBJPACK.
RECEIVERS of mail
IF RECFLAG IS INITIAL.
LOOP AT IT_SAPID.
IT_RECVRS-RECEIVER = IT_SAPID-SAPID.
IT_RECVRS-REC_TYPE = 'B'.
IT_RECVRS-COM_TYPE = ''.
IT_RECVRS-EXPRESS = 'X'.
IT_RECVRS-NO_FORWARD = ''.
IT_RECVRS-NO_PRINT = ''.
APPEND IT_RECVRS.
CLEAR IT_RECVRS.
ENDLOOP.
ELSE.
LOOP AT EMAILADD.
IT_RECVRS-RECEIVER = EMAILADD-LOW.
IT_RECVRS-REC_TYPE = 'U'.
IT_RECVRS-COM_TYPE = 'INT'.
IT_RECVRS-EXPRESS = 'X'.
APPEND IT_RECVRS.
CLEAR IT_RECVRS.
ENDLOOP.
ENDIF.
OBJECT_HEADER (Filename)
CONCATENATE 'Collection Report' '_'
SY-DATUM+4(4) YEAR '.TXT'
INTO V_OBJHEAD-LINE.
V_OBJHEAD-LINE = FYL+16(25).
APPEND V_OBJHEAD.
CLEAR V_OBJHEAD.
Function Module For Sending Mail with Attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = V_DOCDATA
TABLES
PACKING_LIST = V_OBJPACK
OBJECT_HEADER = V_OBJHEAD
CONTENTS_HEX = IT_CONTNT
CONTENTS_TXT = IT_BODY
RECEIVERS = IT_RECVRS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC = 0.
MESSAGE S000(ZZ) WITH TEXT-005.
ELSE.
MESSAGE S000(ZZ) WITH TEXT-006.
ENDIF.
ENDLOOP.
end of my code *
please help me guys... when i run this program, DOCUMENT_NOT_SENT is what i always get..
waiting for ur reply... thank you vey much and godbless.Hi,
Try this sample code.
FORM SEND_TO_EMAIL USING zFName.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: ctmp(50) TYPE C.
Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'JOURNAL'.
CONCATENATE 'SAP Payroll Journal file Period' pybegda INTO ctmp
SEPARATED BY SPACE.
DOC_CHNG-OBJ_DESCR = cTmp.
OBJTXT = 'SAP Payroll Journal'.
APPEND OBJTXT.
CONCATENATE 'For Period' pybegda INTO ctmp
SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
CONCATENATE 'Attached File :' zFname INTO ctmp
SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
OBJTXT = 'Please find the attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
<b>LOOP AT xMail.
CONDENSE xMail-aline.
OBJBIN = xMail-aline.
APPEND OBJBIN.
CLEAR OBJBIN.
ENDLOOP.</b>
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = zFname. APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
OBJPACK-OBJ_NAME = 'DATA'.
OBJPACK-OBJ_DESCR = 'SAP Payroll File'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
LOOP AT PENERIMA.
CONDENSE PENERIMA-PNRM.
RECLIST-RECEIVER = PENERIMA-PNRM.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
ENDLOOP.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = ' '
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
CASE SY-SUBRC.
WHEN 0.
WRITE: / 'Result of the send process:'.
LOOP AT RECLIST.
WRITE: / RECLIST-RECEIVER(48), ':'.
IF RECLIST-RETRN_CODE = 0.
WRITE / 'The document was sent'.
ELSE.
WRITE / 'The document could not be sent'.
ENDIF.
ENDLOOP.
WHEN 1.
WRITE: / 'Too many receiver'.
WHEN 2.
WRITE: / 'Document could not be sent to any recipient'.
WHEN 4.
WRITE: / 'No send authorization'.
WHEN OTHERS.
WRITE: / 'Error occurred while sending'.
ENDCASE.
ENDFORM. -
How to add header and fooder in text file
Hi,
i have created simple application for generate report from database into text file.
But i need to add header and fooder in text file. I dont know is there any API for adding these.
Can anyone help me to create header and fooder in text file.
the below text are needs to be print in the header
name of the table :
Recorder type :
file creation time:
the below text are needs to be print in the footer
Recorder Number:
Record Type;
the actual code is
pst = con.prepareStatement("select REQUEST, DOMAIN_NAME, TRUNC(DATE_OF_CONFIGURATION) AS dateofConfig FROM employee where id=300");
rs = pst.executeQuery();
while (rs.next()) {
request = rs.getString("REQUEST");
domain_name = rs.getString("DOMAIN_NAME");
dateofconfig = rs.getString("dateofConfig");
System.out.println(request + " " + domain_name + " " + dateofconfig);
data.add(request + " " + domain_name + " " + dateofconfig);
System.out.println("before calling method");
writeToFile(data, "c:/Employee.txt");
System.out.println("file created successfull");
rs.close();
pst.close();
private static void writeToFile(List list, String path) {
BufferedWriter out = null;
try {
File file = new File(path);
out = new BufferedWriter(new FileWriter(file, true));
for (Object obj : list) {
String s= obj.toString();
out.write(s);
out.newLine();
out.close();
} catch (IOException e) {
}Thanks
Jasmin
Edited by: user13836688 on Mar 21, 2011 4:06 AM
Edited by: user13836688 on Mar 21, 2011 4:07 AM
Edited by: user13836688 on Mar 21, 2011 4:08 AMuser13836688 wrote:
i have created simple application for generate report from database into text file.First off, when posting code, use [code]...[/code]. or '' tags, not '<code>'.
But i need to add header and fooder in text file. I dont know is there any API for adding these.
Can anyone help me to create header and fooder in text file.Well you plainly have the code to write the file contents; and furthermore your report seems to be contained in a List called 'data'. Why not just add the header and footer lines to it? I'd also suggest making 'data' a LinkedList. That way you can add the header afterwards with no performance hit, just in case the information it contains isn't available at the start of your report loop.
Winston -
Arbitrary waveform generation from large text file
Hello,
I'm trying to use a PXI 6733 card hooked up to a BNC 2110 in a PXI 1031-DC chassis to output arbitrary waveforms at a sample rate of 100kS/s. The types of waveforms I want to generate are generally going to be sine waves of frequencies less than 10 kHz, but they need to be very high quality signals, hence the high sample rate. Eventually, we would like to go up to as high as 200 kS/s, but for right now we just want to get it to work at the lower rate.
Someone in the department has already created for me large text files > 1GB with (9) columns of numbers representing the output voltages for the channels(there will be 6 channels outputting sine waves, 3 other channels with a periodic DC voltage. The reason for the large file is that we want a continuous signal for around 30 minutes to allow for equipment testing and configuration while the signals are being generated.
I'm supposed to use this file to generate the output voltages on the 6733 card, but I keep getting numerous errors and I've been unable to get something that works. The code, as written, currently generates an error code 200290 immediately after the buffered data is output from the card. Nothing ever seems to get enqued or dequed, and although I've read the Labview help on buffers, I'm still very confused about their operation so I'm not even sure if the buffer is working properly. I was hoping some of you could look at my code, and give me some suggestions(or sample code too!) for the best way to achieve this goal.
Thanks a lot,
Chris(new Labview user)Chris:
For context, I've pasted in the "explain error" output from LabVIEW to refer to while we work on this. More after the code...
Error -200290 occurred at an unidentified location
Possible reason(s):
The generation has stopped to prevent the regeneration of old samples. Your application was unable to write samples to the background buffer fast enough to prevent old samples from being regenerated.
To avoid this error, you can do any of the following:
1. Increase the size of the background buffer by configuring the buffer.
2. Increase the number of samples you write each time you invoke a write operation.
3. Write samples more often.
4. Reduce the sample rate.
5. Change the data transfer mechanism from interrupts to DMA if your device supports DMA.
6. Reduce the number of applications your computer is executing concurrently.
In addition, if you do not need to write every sample that is generated, you can configure the regeneration mode to allow regeneration, and then use the Position and Offset attributes to write the desired samples.
By default, the analog output on the device does what is called regeneration. Basically, if we're outputting a repeating waveform, we can simply fill the buffer once and the DAQ device will reuse the samples, reducing load on the system. What appears to be happening is that the VI can't read samples out from the file fast enough to keep up with the DAQ card. The DAQ card is set to NOT allow regeneration, so once it empties the buffer, it stops the task since there aren't any new samples available yet.
If we go through the options, we have a few things we can try:
1. Increase background buffer size.
I don't think this is the best option. Our issue is with filling the buffer, and this requires more advanced configuration.
2. Increase the number of samples written.
This may be a better option. If we increase how many samples we commit to the buffer, we can increase the minimum time between writes in the consumer loop.
3. Write samples more often.
This probably isn't as feasible. If anything, you should probably have a short "Wait" function in the consumer loop where the DAQmx write is occurring, just to regulate loop timing and give the CPU some breathing space.
4. Reduce the sample rate.
Definitely not a feasible option for your application, so we'll just skip that one.
5. Use DMA instead of interrupts.
I'm 99.99999999% sure you're already using DMA, so we'll skip this one also.
6. Reduce the number of concurrent apps on the PC.
This is to make sure that the CPU time required to maintain good loop rates isn't being taken by, say, an antivirus scanner or something. Generally, if you don't have anything major running other than LabVIEW, you should be fine.
I think our best bet is to increase the "Samples to Write" quantity (to increase the minimum loop period), and possibly to delay the DAQmx Start Task and consumer loop until the producer loop has had a chance to build the queue up a little. That should reduce the chance that the DAQmx task will empty the system buffer and ensure that we can prime the queue with a large quantity of samples. The consumer loop will wait for elements to become available in the queue, so I have a feeling that the file read may be what is slowing the program down. Once the queue empties, we'll see the DAQmx error surface again. The only real solution is to load the file to memory farther ahead of time.
Hope that helps!
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support -
Problen when Sending the text file as attachment to the external mail
HI,
I am sending the text file as an attachment to a aexternal mai. mailing is going with text file attachment, but text file is empty. No information in the file is going, only empty text file is going. I am sending the code iam using. Please suggest, if I need to change any passing parameters orany other other solution.
tables: knb1,kna1,adr6,ITEMSET,bsid,TSP01.
INTERNAL TABLES
DATA: BEGIN OF it_kna1 occurs 0,
KUNNR LIKE KNA1-KUNNR,
ADRNR LIKE KNA1-ADRNR,
END OF it_kna1.
DATA: BEGIN OF it_email occurs 0,
ADDRNUMBER LIKE ADR6-ADDRNUMBER,
SMTP_ADDR LIKE ADR6-SMTP_ADDR,
END OF it_email.
DATA: BEGIN OF it_bsid occurs 0,
KUNNR LIKE BSID-KUNNR,
BUKRS LIKE BSID-BUKRS,
END OF it_bsid.
DATA: BEGIN OF it_final occurs 0,
KUNNR LIKE KNA1-KUNNR,
ADRNR LIKE ADR6-ADDRNUMBER,
EMAIL LIKE ADR6-SMTP_ADDR,
END OF it_final.
DATA: BEGIN OF BUFFER OCCURS 10000,
TEXT(255) TYPE C,
END OF BUFFER.
data:xtext type solix_tab." occurs 0 with header line."line.
data:xi_pdf type soli_tab.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,
OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE,
OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE,
DOC_CHNG LIKE SODOCCHGI1,
PARAMS LIKE PRI_PARAMS,
ARPARAMS LIKE ARC_PARAMS,
DAYS(1) TYPE N VALUE 8,
COUNT(3) TYPE N VALUE 1,
VALID TYPE C,
RECEIVER(30),
STR(256).
data: spoolid type tsp01-rqident,
pdf_table like tline occurs 0 with header line,
v_bytecount type i,
itab_pdf like tline occurs 10 with header line,
xi_pdf like tline occurs 0 with header line,
xi_pdf like buffer occurs 0 with header line,
xi_pdf_1 like xi_pdf,
v_length(2) type p,
html like solisti1 occurs 0 with header line,
xi_temp like bapiqcmime occurs 0 with header line,
xi_mime(255) type c occurs 0 with header line.
VARIABLES
data: g_email type adr6-smtp_addr,
TAB_LINES LIKE SY-TABIX,
G_FLAG(1) TYPE C.
g_norm(1) TYPE C,
g_shbv(1) TYPE C,
g_merk(1) TYPE C,
g_park(1) TYPE C,
g_apar(1) TYPE C.
data: l_lines type i,
line1 type i,
l_temp(500) type c,
l_offset type p,
l_lineslen(2) type p,
l_mimelen(2) type p,
v_spono like tsp01-rqident,
l_tabix like sy-tabix.
*****VIA SELECTION-SCREEN
ENDFORM. " SEND_TO_SPOOL
*& Form GET_SPOOL_ID
*& Form CONVERT_SPOOL_TO_PDF
*& Form SEND_MAIL
FORM SEND_MAIL .
data:l_lin like sy-tabix,
l_lint like sy-tabix,
it_list like abaplist occurs 0,
l_newline(2) type x value '0D0A'.
*--Data for the status output after sending
data: user_address like sousradri1 occurs 1 with header line,
sent_to_all like sonv-flag.
clear: reclist, reclist[],
objtxt , objtxt[],
objpack, objpack[],
objbin , objbin[],
doc_chng.
*--move list to office table objbin
*--Start of Changes to support PDF attachments - UB20030116
loop at html.
objbin-line = html-line.
append objbin.
clear objbin.
endloop.
loop at xi_pdf.
objbin-line = xi_pdf-text.
append objbin.
clear objbin.
endloop.
*--We may write additional text to the main document
*--For faxing this will be the cover page. Like sending from SAPoffice
*--the layout set Office-Telefax will be used.
objtxt-line = 'NOTE : Please Consider the below Headers'.
append objtxt.
clear objtxt.
objtxt-line = 'Assignment --> Purchase order number '.
append objtxt.
clear objtxt.
objtxt-line = 'Document --> Invoice No '.
append objtxt.
clear objtxt.
objtxt-line = 'Amount In DC --> Amount Due '.
append objtxt.
clear objtxt.
objtxt-line = ' '.
append objtxt.
clear objtxt.
objtxt-line = ' '.
append objtxt.
clear objtxt.
objtxt-line = 'Please find attached statement for this week'.
append objtxt.
clear objtxt.
objtxt-line = ' '.
append objtxt.
clear objtxt.
objtxt-line = 'This is an AUTO GENERATED MAIL'.
concatenate objtxt-line 'Please Do not reply to this mail' into
objtxt-line separated by ' '.
append objtxt.
clear objtxt.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
*--Create the document which is to be sent
doc_chng-obj_name = 'List'.
doc_chng-obj_name = 'SAPRPT'.
doc_chng-obj_descr = 'Customer statement for the week'.
concatenate 'Customer statement for '
sy-datum into
doc_chng-obj_descr
separated by ' '.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
*--Fill the fields of the packing_list for the main document:
*--It is a text document
clear objpack-transf_bin.
*--The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
*--but it has a body
objpack-body_start = 1.
objpack-body_num = tab_lines.
*--of type RAW
objpack-doc_type = 'RAW'.
append objpack.
*--Create the attachment (the list itself)
describe table objbin lines tab_lines.
*--Fill the fields of the packing_list for the attachment:
*--It is binary document
objpack-transf_bin = 'X'.
*--we need no header
objpack-head_start = 1.
objpack-head_num = 0.
*--but a body
objpack-body_start = 1.
objpack-body_num = tab_lines.
*--of type G_DOC_TYPE
objpack-doc_type = 'PDF'. "commented on 12/13/2007
objpack-doc_type = 'TXT'. "commented on 12/13/2007
objpack-obj_name = 'Attachment'.
objpack-obj_descr = 'Customer Statement'.
concatenate 'Customer Statement' sy-datum into objpack-obj_descr.
objpack-doc_size = tab_lines * 255.
append objpack.
reclist-receiver = g_email.
reclist-rec_type = 'U'.
reclist-com_type = 'FAX'.
append reclist.
data:xi type soli.
xi-line = 'haisdgsfsdf'.
append xi to xi_pdf.
xi-line = 'haisdfdsfd'.
append xi to xi_pdf.
xi-line = 'haisfgsdfsd'.
append xi to xi_pdf.
xi-line = 'haisdfsgfsdgg'.
append xi to xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
EXPORTING
ip_solitab = xi_pdf[]
IMPORTING
EP_SOLIXTAB = xtext[].
**--Send the document by calling the SAPoffice API1 module for sending
**--documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
IMPORTING
sent_to_all = sent_to_all
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
contents_hex = xtext
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.HI,
There are lots of bugs.
Please refer this sample program to fix it.
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Best regards,
Prashant -
Reading a Random Line from a Text File
Hello,
I have a program that reads from a text file words. I currently have a text file around 800KB of words. The problem is, if I try to load this into an arraylist so I can use it in my application, it takes wayy long to load. I was wondering if there was a way to just read a random line from the text file.
Here is my code, and the text file that the program reads from is called 'wordFile'
import java.awt.*;
import java.awt.geom.*;
import javax.swing.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
public class WordColor extends JFrame{
public WordColor(){
super("WordColor");
setSize(1000,500);
setVisible(true);
add(new WordPanel());
public static void main(String[]r){
JFrame f = new WordColor();
class WordPanel extends JPanel implements KeyListener{
private Graphics2D pane;
private Image img;
private char[]characterList;
private CharacterPosition[]positions;
private int charcounter = 0;
private String initialWord;
private File wordFile = new File("C:\\Documents and Settings\\My Documents\\Java\\projects\\WordColorWords.txt");
private FontMetrics fm;
private javax.swing.Timer timer;
public final static int START = 20;
public final static int delay = 10;
public final static int BOTTOMLINE = 375;
public final static int buffer = 15;
public final static int distance = 4;
public final static Color[] colors = new Color[]{Color.red,Color.blue,Color.green,Color.yellow,Color.cyan,
Color.magenta,Color.orange,Color.pink};
public static String[] words;
public static int descent;
public static int YAXIS = 75;
public static int SIZE = 72;
public WordPanel(){
words = readWords();
setLayout(new BorderLayout());
initialWord = getWord();
characterList = new char[initialWord.length()];
for (int i=0; i<initialWord.length();i++){
characterList[i] = initialWord.charAt(i);
setFocusable(true);
addKeyListener(this);
timer = new javax.swing.Timer(delay,new ActionListener(){
public void actionPerformed(ActionEvent evt){
YAXIS += 1;
drawWords();
if (YAXIS + descent - buffer >= BOTTOMLINE) lose();
if (allColorsOn()) win();
public void paintComponent(Graphics g){
super.paintComponent(g);
if (img == null){
img = createImage(getWidth(),getHeight());
pane = (Graphics2D)img.getGraphics();
pane.setColor(Color.white);
pane.fillRect(0,0,getWidth(),getHeight());
pane.setFont(new Font("Arial",Font.BOLD,SIZE));
pane.setColor(Color.black);
drawThickLine(pane,getWidth(),5);
fm = g.getFontMetrics(new Font("Arial",Font.BOLD,SIZE));
descent = fm.getDescent();
distributePositions();
drawWords();
timer.start();
g.drawImage(img,0,0,this);
private void distributePositions(){
int xaxis = START;
positions = new CharacterPosition[characterList.length];
int counter = 0;
for (char c: characterList){
CharacterPosition cp = new CharacterPosition(c,xaxis, Color.black);
positions[counter] = cp;
counter++;
xaxis += fm.charWidth(c)+distance;
private void drawThickLine(Graphics2D pane, int width, int thickness){
pane.setColor(Color.black);
for (int j = BOTTOMLINE;j<BOTTOMLINE+1+thickness;j++){
pane.drawLine(0,j,width,j);
private void drawWords(){
pane.setColor(Color.white);
pane.fillRect(0,0,getWidth(),getHeight());
drawThickLine(pane,getWidth(),5);
for (CharacterPosition cp: positions){
int x = cp.getX();
char print = cp.getChar();
pane.setColor(cp.getColor());
pane.drawString(""+print,x,YAXIS);
repaint();
private boolean allColorsOn(){
for (CharacterPosition cp: positions){
if (cp.getColor() == Color.black) return false;
return true;
private Color randomColor(){
int rand = (int)(Math.random()*colors.length);
return colors[rand];
private void restart(){
charcounter = 0;
for (CharacterPosition cp: positions){
cp.setColor(Color.black);
private void win(){
timer.stop();
newWord();
private void newWord(){
pane.setColor(Color.white);
pane.fillRect(0,0,getWidth(),getHeight());
repaint();
drawThickLine(pane,getWidth(),5);
YAXIS = 75;
initialWord = getWord();
characterList = new char[initialWord.length()];
for (int i=0; i<initialWord.length();i++){
characterList[i] = initialWord.charAt(i);
distributePositions();
charcounter = 0;
drawWords();
timer.start();
private void lose(){
timer.stop();
pane.setColor(Color.white);
pane.fillRect(0,0,getWidth(),getHeight());
pane.setColor(Color.red);
pane.drawString("Sorry, You Lose!",50,150);
repaint();
removeKeyListener(this);
final JPanel p1 = new JPanel();
JButton again = new JButton("Play Again?");
p1.add(again);
add(p1,"South");
p1.setBackground(Color.white);
validate();
again.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
remove(p1);
addKeyListener(WordPanel.this);
newWord();
private String getWord(){
int rand = (int)(Math.random()*words.length);
return words[rand];
private String[] readWords(){
ArrayList<String> arr = new ArrayList<String>();
try{
BufferedReader buff = new BufferedReader(new FileReader(wordFile));
try{
String line = null;
while (( line = buff.readLine()) != null){
line = line.toUpperCase();
arr.add(line);
finally{
buff.close();
catch(Exception e){e.printStackTrace();}
Object[] objects = arr.toArray();
String[] words = new String[objects.length];
int count = 0;
for (Object o: objects){
words[count] = (String)o;
count++;
return words;
public void keyPressed(KeyEvent evt){
char tempchar = evt.getKeyChar();
String character = ""+tempchar;
if (character.equalsIgnoreCase(""+positions[charcounter].getChar())){
positions[charcounter].setColor(randomColor());
charcounter++;
else if (evt.isShiftDown()){
evt.consume();
else{
restart();
drawWords();
public void keyTyped(KeyEvent evt){}
public void keyReleased(KeyEvent evt){}
class CharacterPosition{
private int xaxis;
private char character;
private Color color;
public CharacterPosition(char c, int x, Color col){
xaxis = x;
character = c;
color = col;
public int getX(){
return xaxis;
public char getChar(){
return character;
public Color getColor(){
return color;
public void setColor(Color c){
color = c;
}I thought that maybe serializing the ArrayList might be faster than creating the ArrayList by iterating over each line in the text file. But alas, I was wrong. Here's my code anyway:
class WordList extends ArrayList<String>{
long updated;
WordList readWordList(File file) throws Exception{
WordList list = new WordList();
BufferedReader in = new BufferedReader(new FileReader(file));
String line = null;
while ((line = in.readLine()) != null){
list.add(line);
in.close();
list.updated = file.lastModified();
return list;
WordList wordList;
File datFile = new File("words.dat");
File txtFile = new File("input.txt");
if (datFile.exists()){
ObjectInputStream input = new ObjectInputStream(new FileInputStream(datFile));
wordList = (WordList)input.readObject();
if (wordList.updated < txtFile.lastModified()){
//if the text file has been updated, re-read it
wordList = readWordList(txtFile);
ObjectOutputStream output = new ObjectOutputStream(new FileOutputStream(datFile));
output.writeObject(wordList);
output.close();
} else {
//serialized list does not exist--create it
wordList = readWordList(txtFile);
ObjectOutputStream output = new ObjectOutputStream(new FileOutputStream(datFile));
output.writeObject(wordList);
output.close();
}The text file contained one random sequence of letters per line. For example:
hwnuu
nhpgaucah
zfbylzt
hwnc
gicgwkhStats:
Text file size: 892K
Serialized file size: 1.1MB
Time to read from text file: 795ms
Time to read from serialized file: 1216ms
Maybe you are looking for
-
Solaris 9 x86 bug report - el_GR.ISO8859-7 & CDE
I'm posting this article here, because I can't find any official Solaris 9 x86 bug report page. I hope the developers will notice it. I'm using Solaris 9 x86 (12/02), with the latest 9_x86_Recommended patch cluster installed, and support for Greek in
-
Which BAPI and how to use it in order to modify results
Hello, I need to enter the results of an Inspection Lot using an external program. Below is a screenshot of QA32: - The round circles show what I know; - The arrow shows what I wish to modify; I would appreciate some help on the following topics: - W
-
Can't remove duplicates in Address Book
Have lots of duplicates in Address Book since moving to iCloud. Went to Card>Look for Duplicate. It found a few and so merged them but there are still lots of identical cards that are not recognized as duplicates. Is there a simple, easy way to remov
-
Hi friends, Could anyone explain me about... <b> Use existing IDOC types to send the customer master data, vendor master data and material master data from the sender system to the receiver system.</b>
-
In Mss task areoved but it still shows in my mss task list why?
Hi, I have a querry in my Mss i approved the leave request but still it's remain in my task for approval can You plz give me suggection where's the problem . Thanks and Regards Yagyashikha