Text format changing on page load

Hi all
I have a rather bizarre problem. On page load my text appears and then I get a brief period of time where line spacing is correct and then it reduces?
http://www.chatsworthklein.co.uk/home.html
Any thoughts would be most appreciated as its rather annoying.
Thanks in advance
Mark

Update;
doesnt do it when I open the file locally?
I now have the whole text area moving until a graphic appears?

Similar Messages

CF 8 - pdf format changes with page count

when crating a cfdocument as pdf format when we create a
document approx. 500 pages or less everything is fine. when we go
over that number the font size and some formatting changes. we are
at a complete loss as to why this happening as we have checked and
rechecked every option possible. even going as far as scaling the
report down to only 1 or 2 lines. very bizarre. any thoughts on why
this is or a direction to troubleshoot this would be great. thanks
-Ralph

I'm not sure if this helps, but we've noticed formatting changes when the PDF writer considers the items in the cfdocument page too big for the layout (fonts resizing, inconsistent styling, etc). We shrunk our content down (especially images) to make sure everything fit on screen. also, if you are using images, make sure you are placing images in the cfdocument at the same height/width as the actual image file.
Not sure how helpful that's going to be - sounds like your issue is more about raw file size than anything else, but thought I would mention it.
-Michael

Text Format changes when Published Online.

I upgraded from iWeb 06 to iWeb 08 and then my pages online stopped text wrap in the pages. The pages are fine in iWeb, but not when you visit the site. I have rePublished the site, but still the same.

Once I upgraded, I never did a "Publish All to .mac", I just would use the publish button. After I deleted and made the change again and did a "Publish All to .mac, it worked.

Report in text format show break page !!

when i generate a report in char mode, in a text file, it show a break page between the head section and the principal section. there is any way to delete this break page (a line command or properties ( i specify a desformat no_ff)).
thanks.

To get a output data to a text file that contains no form feeds ( page breaks ), or other control characters in the output), do followings:
Modify the printer definition file to eliminate form feeds
a. Invoke a text editor and open the file dflt.prt.
b. Move to the following line:
after pages control(L)
Remove "control(L)" so the line appears as shown
below:
after pages
Removing the control sequence from the printer definition file will keep the output from breaking between pages when the report is formatted.
Thanks
The Oracle Reports Team

Setting perameters for text format change

I'm pretty new to the InDesign scripting thing. A very good programmer previously took care of these at my company but he left and so I need to try to solve some problems related to new work. I've worked with the programmer's files and made some basic changes, but have run into a wall on others. I tried for several hours to solve the problem on my own but cannot. I tried saving these searches as GREP preferences and hoped to be able to convert them but can't figure that out. So I hope someone can help me.
I need my designers to be able to select a text frame and change the font for type formatted within very specific ranges. In this case, I need:
- type with 9pt leading and Interstate BoldCondensed type to be changed to 9 pt leading with Myriad Pro font. (Alternatively, instead of the leading I could have it change all Interstate BoldCondensed font in the paragraph style — my GREP files tell me "zAgate:agateHed" — to Myriad Pro Bold.
and
- type at point size 6.75 ts and Interstate BoldCondensed to change to Myriad Pro bold font.
I guess it comes down to I don't know how to have the script find type that has more than one characteristics and then only change one.
What I've tried:
app.findTextPreferences.pointSize = 6.75;
app.findGrepPreferences.appliedFont = 'InterstateBoldCondensed';
app.changeGrepPreferences.appliedFont = 'Myriad Pro Bold';
app.findGrepPreferences.findWhat = "";
app.changeGrepPreferences.changeTo = "";
myStory.changeGrep();
...and ...
app.findMyTextObject.leading = 9;
app.findGrepPreferences.appliedFont = 'Interstate BoldCondensed';
app.changeGrepPreferences.appliedFont = 'Myriad Pro Bold';
app.findGrepPreferences.findWhat = "";
app.changeGrepPreferences.changeTo = "";
myStory.changeGrep();
...an alternative to the second, using paragraph style rather than leading ...
p.findGrepPreferences.appliedParagraphStyle = "zzAgate:agateHed";
app.changeGrepPreferences.appliedParagraphStyle = "zzAgate:agateHed";
app.findGrepPreferences.appliedFont = 'Interstate BoldCondensed';
app.changeGrepPreferences.appliedFont = 'Myriad Pro Bold';
app.findGrepPreferences.findWhat = "";
app.changeGrepPreferences.changeTo = "";
myStory.changeGrep();
In both cases, it just makes the font change regardless of size or leading.
Thank you in advance for any and all help.

Hi,
Dont mix Text and Grep preferences.
Dont use Grep if no Grep expresion needed.
Dont set findWhat if your criteria regards to formats only.
Remember to clean up preferences before and after
app.findTextPreferences = app.changeTextPreferences = null;
app.findTextPreferences.leading = 9;
app.findTextPreferences.appliedFont = 'Interstate BoldCondensed';
app.changeTextPreferences.appliedFont = 'Myriad Pro Bold';
myStory.changeText();
Above should work (assuming myStory is a proper object)
Jarek

Unable to set focus to login text field AUTOMATICALLY on page load

Hi,
I'm trying to have my flash (AS 2) login page have the
username field start blinking right away after the page is loaded
but so far, no success.
I've added the following Javascript to the HTML wrapper:
But it still doesnt work. Can anyone help?
See whats happening by
clicking here.

Use the following in the Flash code:
Selection.setFocus(username_field_instance_name);

Change in page load behavior from 4.5ws and 5.0.3

We have mature portlets that use <iframe> to build up a page. We are using IIS 6.0 and browsing with IE6.
We upgraded to 5.0.3 last week and now we find that the portlets are throwing JavaScript errors indicating that parts of the page framework are not available. These errors are not thrown consistently. (e.g. A parent page has three iframes => tabs, status and main. The main page has a reference to parent.frames("tabs").document.all("field").value in a javascript function.) The error is "object doesn't exist".
Two questions: 1) Has the mechanism for fetching pages changed so that the portlet pages build differently? 2) Is there any way to predict/force when portions of pages are available?
Mike

We have mature portlets that use <iframe> to build up a page. We are using IIS 6.0 and browsing with IE6.
We upgraded to 5.0.3 last week and now we find that the portlets are throwing JavaScript errors indicating that parts of the page framework are not available. These errors are not thrown consistently. (e.g. A parent page has three iframes => tabs, status and main. The main page has a reference to parent.frames("tabs").document.all("field").value in a javascript function.) The error is "object doesn't exist".
Two questions: 1) Has the mechanism for fetching pages changed so that the portlet pages build differently? 2) Is there any way to predict/force when portions of pages are available?
Mike

Text format change from iWeb to browser

Has anyone else had a problem with their text looking different (in both Safari and Firefox)? In one place, the font switches from 14 to 12. On another page, my indentations don't line up. Overall, I'm pleased with the software, but it is irritating that my website doesn't look as clean as it does in iWeb. Thanks.
--Patrick

Yes, and it can be much worse looking at a page from a Windows browser. I'm currently struggling with "white space" at the bottom of the text box on the blog page. The amount of space is very noticeable, especially if the background of your text box differs from the page background. In this case it has to do, I believe, with font settings, type, size, justification, and line spacing, even inserting pictures into the text box.
Unfortunately, there isn't much that can be done. Every browser renders pages differently. It is rather appalling that the iWeb team can't even get their WYSIWYG to match what is seen in Safari, but what can you do? You can either keep things simple or design for a particular browser audience. Something like 85 perent of people use Internet Explorer for Windows, so I tend to think that's the best solution, if an unappealing one.

Wild text format changes in Firefox

Using blank pages in iWeb (1.1.2), and entering text into text boxes, everything lays out fine in iWeb. Once published to my site, two weird things happen.
In Safari, everything looks okay, except a number of lines that I really want to be single lines, instead wrap the last word to a second line (even though there's plenty of unused space on either side).
The bigger problem is with Firefox (2.0.0.7), where instead of each line being single spaced, there's about 20 spaces between each line, making it worthless. Since a lot of people I'll be sending to this site use Firefox, this is a big problem.
By the way, I use Firefox on hundreds of sites every day and have zero problems. So I don't think the problem is from any odd settings in my Firefox prefs.
Any ideas?

I have had some strange text behaviors as well. They seemed to be solved if I stick with a typical microsnuffed font such as Times New Roman or Arial and set the size.
Browsers can still display your fonts strangely depending on how users set them up. If you choose a typical font you have a better chance of it being displayed correctly.
Kurt

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

Can Pages 4.3 maintain defined text formatting for at a given list level?

I'm hoping the answer to this question is a simple 'duh' solution that I some how over looked. I'm using Pages 4.3 and I am trying to create a tiered list to organize ideas into different sublevels. I want to be able to write at a particular level, then create sub levels (return -> tab) with different formatting so the levels are easily distinguished at a glance. When I move back to the higher levels (return -> shift + tab), Pages maintaines the text formatting I used at the lower level, rather than returning to the previously used format at the higher level. For example, what I want is ....
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
What I get is...
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
This means that anytime I move up or down in the tiers of a list, I need to redefine the formatting for each new bullet. I tried creating my own list styles, but that does not appear to preserve changes made to fonts or sizes. This seems like such a simple function and time saver that I feel like I must be doing something wrong. It has been a while since I used pages, but I don't remember having these problems before. Does pages really require one to reset the formatting everytime the move between list levels?

Thanks Michael!
So your suggestion is to create the pricing in ECC and then download it in CRM...
Now tat would mean that first the mapping has to be performed in ECC for the existing paroducts and product category..then create pricing for those mapped prod. cat. in ECC and then download it to CR M..plz correct me if I am wrong...
regards,
Aneesh

Text shifts after page load

When viewing my site online, the page loads and then the text sometimes shifts and re-positions slightly. Long text blocks may even re-format and become one line less in height. This happens in Safari, Explorer, and Mozilla on Mac and Windows. This only happens occasionally but, where it happens, it is consistent and happens every time. I am using Arial standard font, left justified only, and default text settings for space and inset. So no special font or settings at issue. This happened with iWeb 08 as well as 09.
Any ideas please ... it makes my site look so scruffy ...... :o(

Sorry to be slow in coming back on this but I wanted to try Roddy's solution before troubling anybody further. Loosening the text boxes has indeed done the trick. The amount need to loosen is surprisingly large in some cases, and it took several attempts to get everything OK.
Thank you both for replying so quickly. If you want see the results of your advice in a problem free site then go www.cambiguities.com. It is my first attempt at a site and is quite ambitious for a first go. I am a photographic illusion creator and it is my showcase. Who knows ..... you might enjoy it ...... ;o)
Thanks again

Flash File Gets a White Border on Page loaded and link changes to hyperlink

Hi,
Flash File Gets a White Border on Page loaded and the mouse
pointer changes to hyperlink Pls Help Its caused only in a System
which has Win XP or higher version U can view the Bug at "
www.prosystems.in"
Regards,
Francis

> Also, I need to link the file a URL and putting <a
href> brackets around it is
> not working. Does the link to the page have to embedded
in the swf file?
wrapping an A HREF tag around a flash .swf object will not
work.
the link has to be "in" the swf, back when it was an FLA file
in flash.
Or- the .swf has to have actionscripting in it so that it
will take a url as
a parameter.
On the flash not showing--
Random observations from a quick look.
There is no \ backslash in a web path or url.
you can usually "get away with it" on a windows server, but
it's incorrect
and something to avoid.

<link type="text/css" rel="stylesheet"
href="build\fonts\fonts.css">

<script type="text/javascript"
src="build\yahoo\yahoo.js"></script>
<script type="text/javascript"
src="build\dom\dom.js"></script>
<script type="text/javascript"
src="build\event\event.js"></script>

<script type="text/javascript"
src="build\calendar\calendar.js"></script>
<link rel="stylesheet" type="text/css"
href="build\calendar\assets\calendar.css" >
The javascript call to show the flash file contains an
absolute local path:
'file:///Macintosh HD/Users/user/Documents/ Work/Nimble Press
/Grant
Wrangler/Website/GW ADs/tiged
The noscript tag uses an absolute local path:
<param name="movie" value="file:///Macintosh
HD/Users/user/Documents/
Work/Nimble Press /Grant Wrangler/Website/GW
ADs/tiged.swf">
<param name="quality" value="high">
<embed src="file:///Macintosh HD/Users/user/Documents/
Work/Nimble Press /Grant Wrangler/Website/GW
ADs/tiged.swf" quality="high"
pluginspage="
http://www.adobe.com
it's also not a good idea to put things in a folder using a
blank space, and
whose name contains the word "ADs"
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Changing text size in form field (rich text formatting enabled)

Hi all,
I'm hoping someone can help me out here. I've created an interactive PDF with form fields with "Rich Text Formatting" enabled.
My client has filled in the fields and would like to make the text bigger. When right-click, there are only options to change the text style (bold, italics etc) but nothing to change the text size. I'm not keen on disabling and then re-enabling the "Rich Text Formatting" options as the text have been formatted (bold, italics, superscript, subscript etc) and approved, and this will remove all the existing formatting.
Can anyone help?
Acrobat 9.4.6
Mac 10.6.8
Cheers,
Tricia

Thanks so much!! Really appreciated!
Strangely enough, I found the Form Field Text Properties dialogue box by randomly choosing "Hyperlink" in the right-click options. Who would have thought!

Can't link a style to text on a page; text keeps changing to black instead of blue

I have links to the web pages I'm working on at the bottom. I
am trying to make the text and color consistent on two pages on the
website I am working on. One page is a printer friendly version of
the other. [I have looked and looked under Dreamweaver Help but I
can't figure this out.]
I have somehow created a CSS style called "rental blue
arial" and I've linked it to the first page and applied the style
to text. I can't for the life of me remember how I did that, and
now I'm trying to connect that style sheet to the print version of
that page but I can't. When I go to the CSS style sheet the
properties and links are grayed out. On the printer friendly page I
don't see "rental blue arial" in the list of styles. I always
select the whole table on the regular non-print page and copy it to
the printer friendly page but when I do all the text formatting is
lost and the text appears different colors.
What can I do or can someone fill me in? I know it's basic,
but I can't figure this out. Also, I notice that the person who
created the website has 10-12 styles associated with each page but
they're not CSS styles and I don't know how he created them; I
can't figure out a way to create just a style, not a CSS style. So
here are links to the web pages I'm talking about:
regular page:
http://www.chatelrealestate.com/rentals.htm
printer friendly page with messed up colors:
http://www.chatelrealestate.com/rental_print.htm[b

>>I notice that the person who created the website has
10-12 styles
>>associated with each page but they're not CSS styles
No such thing. Those are CSS styles
>>I can't figure out a way to create just a style, not
a CSS style
Again, there is no such thing as a style that is not a CSS
style.
It looks like you have not taken time to understand CSS.
Until you do so you
will have more frustration than satisfaction. The page I've
looked at are a
mess. There are many embedded CSS styles with non-descript
names. That makes
maintaining and updating the site a nightmare. Suggest you
pull all those
embedded styles into a single style sheet, sort out what they
are supposed
to do, use descendant selectors where possible and give each
style a
meaningful name.
BTW there is no style sheet attached to
http://www.chatelrealestate.com/rental_print.htm.
Go back to DW Help and
learn about attaching style sheets.
Walt
"Jen_26059" <[email protected]> wrote in
message
news:[email protected]...
>I have links to the web pages I'm working on at the
bottom. I am trying to
>make
> the text and color consistent on two pages on the
website I am working on.
> One
> page is a printer friendly version of the other. [I have
looked and looked
> under Dreamweaver Help but I can't figure this out.]
>
> I have somehow created a CSS style called "rental blue
arial" and I've
> linked
> it to the first page and applied the style to text. I
can't for the life
> of me
> remember how I did that, and now I'm trying to connect
that style sheet to
> the
> print version of that page but I can't. When I go to the
CSS style sheet
> the
> properties and links are grayed out. On the printer
friendly page I don't
> see
> "rental blue arial" in the list of styles. I always
select the whole table
> on
> the regular non-print page and copy it to the printer
friendly page but
> when I
> do all the text formatting is lost and the text appears
different colors.
>
> What can I do or can someone fill me in? I know it's
basic, but I can't
> figure this out. Also, I notice that the person who
created the website
> has
> 10-12 styles associated with each page but they're not
CSS styles and I
> don't
> know how he created them; I can't figure out a way to
create just a style,
> not
> a CSS style. So here are links to the web pages I'm
talking about:
>
> regular page:
http://www.chatelrealestate.com/rentals.htm
> printer friendly page with messed up colors:
>
http://www.chatelrealestate.com/rental_print.htm[b
>

Text format changing on page load

Similar Messages

Maybe you are looking for