Text From 150 about bill- Not an EE customer

This morning I recieved a text from 150 saying 'We recently tried to contact you regarding your bill. To avoid interuption of your outbound service please make payment by calling 360 from your handset.'
However, I am not an ee customer! I used to be, but my contract ended in August 2014 with the final bill paid in full. I'm confused as to why EE would be contacting me about a bill now, and am a bit worried that this could be some sort of text scam. Could it be a scam or a message sent in error, or do I need to call ee? I'd like to avoid calling ee at my own cost, as this seems to be a mistake on their end. Any advice appreciated!

I don't understand how you can receive a text on 150 when you are not on an EE network. 150 is a network specific code. Sounds like a spoof to me especially as they asked you to reply on 360, another network specific code.

Similar Messages

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

Hi, everyone. I just got new ipad2 with 3G now (the one before didn't have 3g) and I was hoping to send texts from my ipad. Not happening... Any reason why?

I just got another ipad, now with 3g . I did hope I'll be able to text from it...not happening. The address goes idle/red with a red exclamation mark. I spent 15 min with Apple on the phone. Didn't help. Can I really send texts from IPAD2 with 3g?

The email to which you are sending it to may not be correct. You can only send it an Apple ID with that email. For example, I could try to send it to my friend Bob who frequently uses the email bob@sample_email.com but his Apple ID may be bobby@sample_email.com. Maybe that helps?

I cannot receive text from anyone that is not on an iPhone...

i cannot receive text from anyone that is not on an iPhone...

sorry i just edited. i can receive text from other carriers, other phones, but cannot receive from iphones.
i rececently switched to a 5 AND added one for my daughter on her own number but same apple id. i dont have her phone nearby to see what she may have possibly changed.

Importing text from XML file, "\n" not working

Hi I'm currently trying to set up my game so it pulls in all text from an external XML file (to make switching between different languages easier). The problem is that on several occasions I need to use the special code "\n" to start a new line (for formatting purposes) but when I'm pulling the text in from the XML file this is not starting a new line any more - it is just appearing as normal in the text. (e.g "Here is some \n example game text") How do I get around this?
Any help here appreciated, I'm supposed to be finished everything by tomorrow so I need suggestions asap haha Thanks.

I don't see how I can be setting it wrongly, I have the exact line:
XML.ignoreWhitespace = false;
Before this I tried myXMLDocName.ignoreWhitespace = false; (before I realised it was a static function)
This line is placed immediately after I have loaded my XML document and assigned it to a variable. e.g.
private function XMLLoaded(e:Event):void
            trace("XML Loaded");
            MyGameGlobalVars.xmlDoc = new XML(e.target.data);
            XML.ignoreWhitespace = false;       //previously: MyGameGlobalVars.xmlDoc.ignoreWhitespace = false;
            xmlLoaded = true;

Short text from a sales order not pulling through to a STO

Hi,
Does anyone have any idea why the short text from a sales order would pull correctly into a purchase requisition, but when this PR is converted to a PO then the short text in the PO reverts to that in the material master?
Thanks in advance.
jj

Hi,
IN ECC 6.0 EHP 4, it gets copied from PR to PO but not in lower versions.
Hence you can achieve the same using some PO BADI's or through enhancement spots.
Thanks & Regards,

Text from Verizon IPhone 5s not received in Sweden

My texts that I send to Sweden are delivered as garbled 4-character words. This was not an issue for the same recipient when I was on a Sprint IPhone 4s (until three days ago)
I can, however, receive texts from the same recipient. This is not an IMessage issue.
Please advise.
Thanks!

Are you using WiFi or cellular data? If you're on WiFi, try turning WiFi off temporarily and test it on the cellular data network.
When the phone goes into standby, the WiFi radio will be powered down to conserve battery life after a few minutes. If you're getting messages while the phone is in standby, that may be why, if there is a problem with the WiFi network.
Have you done any troubleshooting at all?
Reboot? Reset network Settings? Reset your router? etc.?

TS2755 Texts from other iphone users not coming through while roaming.

I am roaming daily in the US. Ever since I upgraded to ios 7 my phone won't receive any texts from other iphone users unless I am on wifi. Texts do come through from non-iphone users. I do have cellular data shut off while roaming (I don't want to be charged roaming fees for facebook notifications, emails, etc.) but this never stopped texts from arriving before updating. I pay $20 a month to text from the US and want to be able to utilize this feature! Any suggestions?

Settings -> Messages --> see what is checked for receiving messages
Does your iPad have 3G/4G?
If not then most likely the messages are going to your Apple ID email
You can uncheck that and just leave your number checked
It should then come to your phone

Friends Receiving Texts from Me I Did NOT Send

Apparently over the past week my friends have been getting a strange poem texted from my number that I did not send them, the text does not appear on my iPhone 4S either, the text says:
"because i've taken upon the challenge
to write a book this month
chup and i have resorted to the one
thing we avoid like a mortal enemy:
a schedule.
each hour is designated as a workspace
each day has an ample to do list
we're dedicated to accomplishing
the work.
with my time allotted out
and not much for wiggle room
i am surprised to find how much more
i get done in a day.
yesterday i wrote,
i cooked
i worked
i cleaned
i fed the baby
(interspersing)
i napped
i read books to the children
and just before sunset
we hiked the dusty
shoreline trail.
it makes me wonder
if having a schedule gives me
so much more time,
will my second mortal enemy
(a budget)
give me
more
money?
thanks Page and dog Dixie for the beautiful evening on the trail.
this month I've decided to write a book while simultaneously breastfeeding my baby and battling the postpartum blues. should be a blast. will i get it done?
stay tuned . . "
Pretty strange....thanks in advance for any help.

We will need more information to be able to assist you.
These message yoy are receiving are probably just a particular type of spam. However it is also possible (unlikely) that your email account is being used to send spam, and that these are the bounce messages.
To tell the difference, you need to look at the email headers. Open the message, then go to the View menu and select Message -> All Headers.
Select the text and post it back here (remembering to obscure your own email address first).
Cheers,
Rodney

Receive texts from some group members, not all group members

Hello!
I have an iPhone 5S and recently purchased an iMac. iMac is on OSX Yosemite and iPhone is on iOS 8.1.2
Recently I have been involved in a few group SMS text chains and I am receiving texts from some of the group members but not all of them. I can receive texts individually from everyone in the group.
I was recently playing around with iMessage on my new iMac and feel like I may have done something in the setup that caused this issue.
Anyone know what's going on? I reset network settings on my phone and closed out iMessage on my computer (I also signed out of iMessage completely)

If iMessage is turned off on both devices and you are still unable to receive their texts, it is a carrier issue, the carrier will need to resolve it.
If iMessage is turned on on both devices and you are unable to receive their texts, it's an iMessage setup issue.

Text from Design view is not visible on View

I converted a project from RoboHelp 9 to 11, and discovered that several of my topics were changed. Most of the changes were minor, e.g. spacing, bold type, bullets, etc., but I'm still having to go through each page, to make corrections. Oftentimes, the "problems" don't show up until I View the topic, but up to this point I've been able to fix them. However, one topic looks fine in Design view, but when I open it in View, almost all of the text is gone. I've tried retyping portions, to see if it reappeared, but not all of it does. Do you have any idea what is happening and how I fix it?

LOL, you should probably check out my dear friend Peter Grainge's site
RoboHelp Tour
Here's the deal. In times past, the eHelp corporation had RoboHelp. And they created RoboHelp HTML long before HTML really was wildly popular. In those times it was necessary to implement some rather arcane workarounds to allow editing and a WYSIWYG environment.
Time moves forward and Adobe are now the owners of the venerable RoboHelp. They modified the editor to be more standards compliant. And as you might imagine, that has the real possibility of somewhat munging things. Not that RoboHelp is munging code, but browsers are now a bit more persnickety about things. For example, that transparent thing was likely there in earlier browser versions and was ignored. So it's a combination of things.
Cheers... Rick

VPRS - Cost price from sales to billing not valuation record

Hi,
I need to get the cost to flow from the sales document to the billing document for the cost price.
We allow selected users to change the cost price at the time of the sales order. But when I create a billing document the moving average price is determined and not the cost price on the sales order.
In copy control pricing is 'G' and price source is order.
Is there a way around this via configuration ?

Dear Javaid
Can you confirm that the sale order quantity and the billing quantity are same. In most of the cases, these would be different and hence the cost also.
Meanwhile, in V/06, for this condition type VPRS, ensure that the Calculation Type is "C"
thanks
G. Lakshmipathi

Arabic text from clipboard to font not crossing over correctly??

Okay, so I can go to Google Translate and type in a phrase and get it rendered into Arabic, and it looks correct. But when I copy and paste the Arabic characters into Illustrator, the letters that come out (using one of the many Arabic/Farsi fonts I have) aren't the same. It's as if you had "Mary Had A Little Lamb" in Arabic in Google Translate, but when you copy and paste you get "wblwevarrtblempswciartmfe" - total gibberish. I can paste it to a TextEdit file and it looks correct, just not when I paste it into Illustrator.
Anyone know how to make that work correctly???
Here's a screen shot. At the top is a screen shot taken from having pasted it into a TextEdit file. The bottom is the exact same "paste" into Illustrator.
Thanks!
Butch

WHich version?
Only in the MENA version you can truly edit RTL writing.
In CC you can perhaps paste the text in when the Indic options are active and the composer is set to that language.

Copy header text from DO to billing via user-exit

Dear Experts,
We have a requirement to copy one text field in the DO header to Billing header text field. I've searched the forum before posting this one but none seems to fit my requirement. I am using RV60AFZC form USEREXIT_FILL_VBRK_VBRP for this. From VF01, I see the header text was populated but after saving, it is being cleared out. I suspect the copy control from sales order to billing header text is doing this, nothing is saved in the SO.
Any idea how to do this by configuration or by user-exit/enhancement spot?
Looking forward for your responses.
Thanks in advance.
nEnE

Can you please check VOFM>Copying Requirements>Texts, Routine 1. The documentation states:
"This requirement checks if the reference document header has a text entry. If so, it is automatically transferred. This requirement is assigned in the detail of the access sequence for header text determination."
You can copy this in a 9XX routine number and write your specific code there.
Hope this helps!

Text is not copying from delivery to billing

Dear All,
I have determined the text from delivery to billing corretly.
but it is not copied from delivery to billing.
Is there any settings in copy control kindly suggest.
Best regards,
ramesh

Use T.Code VOTXN"
Choose on Billing document - Header.
Click on Change button.
Select your text procedure.
You can know your procedure by clicking on the tab Text procedure assignment.
Click on Text ID's in Textprocedure.
Select your text id.Check the tick mark under "Refer/Duplicate" field.
And also check your access seqence
For understanding/reference, kindly refer following SDN thread
- Text Determination Procedure from Sales order to Delivery ,&Billing
- Re: Copying Text from Sales to Sales Document
Thanks & Regards
JP

Text From 150 about bill- Not an EE customer

Similar Messages

Maybe you are looking for