Text from Design view is not visible on View

I converted a project from RoboHelp 9 to 11, and discovered that several of my topics were changed.  Most of the changes were minor, e.g. spacing, bold type, bullets, etc., but I'm still having to go through each page, to make corrections.  Oftentimes, the "problems" don't show up until I View the topic, but up to this point I've been able to fix them.  However, one topic looks fine in Design view, but when I open it in View, almost all of the text is gone.  I've tried retyping portions, to see if it reappeared, but not all of it does.  Do you have any idea what is happening and how I fix it?

LOL, you should probably check out my dear friend Peter Grainge's site
RoboHelp Tour
Here's the deal. In times past, the eHelp corporation had RoboHelp. And they created RoboHelp HTML long before HTML really was wildly popular. In those times it was necessary to implement some rather arcane workarounds to allow editing and a WYSIWYG environment.
Time moves forward and Adobe are now the owners of the venerable RoboHelp. They modified the editor to be more standards compliant. And as you might imagine, that has the real possibility of somewhat munging things. Not that RoboHelp is munging code, but browsers are now a bit more persnickety about things. For example, that transparent thing was likely there in earlier browser versions and was ignored. So it's a combination of things.
Cheers... Rick

Similar Messages

  • BPM worklist app views are not visible in IPM task viewer

    Hi,
    we upgraded our system from 11.1.1.3.0 to
    weblogic 10.3.5.0
    SOA 11.1.1.5.0 with BPEL processes
    ECM with IPM and UCM 11.1.1.5.0
    after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
    Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
    Thanks a lot in advance for any help
    Edited by: 914063 on Jun 20, 2012 12:56 PM
    Edited by: 914063 on Jun 20, 2012 12:57 PM

    Hi Renuka,
    There are basically two ways to create an ADF UI for a BPM Task:
    1. Generate it from the task
    2. Create a ADF Taskflow based on Human Workflow Task
    Since I tell this by heart, I might be slightly wrong in the terms.
    You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
    Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
    Regards,
    Martien

  • Html view is not visible

    Hi Guys
    i am calling a webtemplate from vc by using html view
    but the contents of html view is not visible in the application but html view window is opening but blank screen when i am trying this link direct in internet explorer its opening even www.google.com is not working from the application.
    after changing my compiler to flex2 compiler i am getting this problem
    Regards
    Amiya

    Hi Govindu
    Thanks
    actualy i am using some guard condition in my html view if i am removing it then its displaying
    in flex2 compiler and some custom drop down events also working strangely in flex2 which is working properly in flash  its realy strange
    can u please explain what are all fixes we can do in order to solve this issue we have also raised oss message regarding this
    Regards
    Amiya

  • Trellis view is not visible

    Hi,
    Trellis view is not visible on answers. I'm using 11.1.1.6.0 version.

    Hi,
    Trellis Views avilable obiee11.1.1.6.2 BP and above version only. try to upgrade your version obiee11.1.1.6.0 to 6.2BP
    Note: latest patch is present obiee11.1.1.6.7 BP (downloaded from My oracle support). and
    Trellis Views is new Features for 11.1.1.6.2 BP version.
    Refer more for "New Features for 11.1.1.6.2" section.
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10544/whatsnew.htm#CHDEGFAC
    Thanks
    Deva

  • Sales area data view is not visible

    Hi All,
    the salea area data view  is not visible for  all BP roles in BP master data
    please help me how can i need to put in a visible

    hi
    sales area data tab is not visible for each and every BP role,
    it is visible for sold to party,ship to party roles,
    there is aview associated with this role that is CRM 000
    if you want to have sales area data tab visible in the role like BP general you have to assign this view to your role
    but i should make you one thing very clear that sales area data tab is meant for the customer who has purchased the order and final order has been given and within this tab you have each and every info regarding the sales office,sales group etc that where the order is to be delieverd or purchased from,
    once a final order is given it can be sold to party role,ship to party role or bill payable role ,u urself tell in the role of customer how can u see the sales info if the customer hasnt purchased the order ,
    likewise the consumer role also has sales data info so sales area data tab is visible in this role too
    hope it clears all your doubt,
    in case of any doubt do revert back
    best regards
    ashish

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • Hi, everyone. I just got new ipad2 with 3G now (the one before didn't have 3g) and I was hoping to send texts from my ipad. Not happening... Any reason why?

    I just got another ipad, now  with 3g . I did hope I'll be able to text from it...not happening. The address goes idle/red with a red exclamation mark. I spent 15 min with Apple on the phone. Didn't help. Can I really send texts from IPAD2 with 3g?

    The email to which you are sending it to may not be correct. You can only send it an Apple ID with that email. For example, I could try to send it to my friend Bob who frequently uses the email bob@sample_email.com but his Apple ID may be bobby@sample_email.com. Maybe that helps?

  • I cannot receive text from anyone that is not on an iPhone...

    i cannot receive text from anyone that is not on an iPhone...

    sorry i just edited.  i can receive text from other carriers, other phones, but cannot receive from iphones. 
    i rececently switched to a 5 AND added one for my daughter on her own number but same apple id. i dont have her phone nearby to see what she may have possibly changed.

  • Return results from custom dialog box not visibly updating field value

    I have a form with custom dialog boxes (execDialog) for data entry. The dialog box is being called from the Entry event successfully. I also have it called from the Click event. So, here's what I get:
    1. On entering the field, I get the dialog box pop up, I select a value, it visibly changes the field raw value and leaves focus in the field.
    2. If I exit the field and re-enter, it also works as in point 1 (as expected)
    3. If, while focus is already in the field, I click in the field, I get the dialog box, as expected, but after selecting a value from the dialog, the field raw value DOES NOT VISIBLY change until I exit the field! It's kind of like the click event is working in conjunction with the Exit event. This is totally counter-intuitive for a production form that is being designed for the general populace.
    Anyone had any experience with this?
    Cheers,
    Marty.

    Thom Parker answered this here: http://forums.adobe.com/message/2614570#2614570
    Answer copied below:
    "The problem is that when the focus is on the text box
    it's in edit mode. It's only displaying the value interactively entered by
    the user, or as a consequence of the change event.  What you need to do is
    force the focus off of the text box in code.  You can do a little trick
    where you bounce it to a tiny transparent field, which then bounds the focus
    back so it doesn't look like the focus changed."
    What I ended up doing was calling up the dialog box, then using setfocus with no parameters to remove focus from the field, as follows:
    this.rawValue = this.dialogBoxFunction(this.rawValue); // passing current value so dialog box defaults to that value
    xfa.host.setFocus();
    Cheers,
    Marty.

  • Friends Receiving Texts from Me I Did NOT Send

    Apparently over the past week my friends have been getting a strange poem texted from my number that I did not send them, the text does not appear on my iPhone 4S either, the text says:
    "because i've taken upon the challenge
    to write a book this month
    chup and i have resorted to the one
    thing we avoid like a mortal enemy:
    a schedule.
    each hour is designated as a workspace
    each day has an ample to do list
    we're dedicated to accomplishing
    the work.
    with my time allotted out
    and not much for wiggle room
    i am surprised to find how much more
    i get done in a day.
    yesterday i wrote,
    i cooked
    i worked
    i cleaned
    i fed the baby
    (interspersing)
    i napped
    i read books to the children
    and just before sunset
    we hiked the dusty
    shoreline trail.
    it makes me wonder
    if having a schedule gives me
    so much more time,
    will my second mortal enemy
    (a budget)
    give me
    more
    money?
    thanks Page and dog Dixie for the beautiful evening on the trail.
    this month I've decided to write a book while simultaneously breastfeeding my baby and battling the postpartum blues. should be a blast. will i get it done?
    stay tuned . . "
    Pretty strange....thanks in advance for any help.

    We will need more information to be able to assist you.
    These message yoy are receiving are probably just a particular type of spam.  However it is also possible (unlikely) that your email account is being used to send spam, and that these are the bounce messages.
    To tell the difference, you need to look at the email headers.  Open the message, then go to the View menu and select Message -> All Headers.
    Select the text and post it back here (remembering to obscure your own email address first).
    Cheers,
    Rodney

  • The date update from TFS online are not visible on Project pro

    Hi everyone,
    I updated the start date and the finish date from TFS online, i saved and refresh the page. Then On the Project pro i clicked on refresh.  The update are not visible on project pro.
    I don't no why because when i change the title of the task from TFS online. the update is visble on Project pro.
    Someone to help me??
    Thanks for advance.
    rexcs

    Hi rexcs，
    Since this thread is more related to Visual Studio Online, I will move it to the right forum for a better response. Thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Text Table entries for 0Material not visible in report

    Hello All,
    I have been executing a report to evaluate the forecast error. In this report, when I drilldown via Material, I get the description of the material for few of them and for remainder, just the key is displayed in the description as well as the key of that material.
    I checked the text table for entries of such materials and to my surprise, the text entries do exist in the cube for these materials as well. But it is not being displayed in the reports.
    I also checked the property for Material in the query nd it is being displayed as 'Text and Key'. So there seems to be no issue in the query as well.
    Can someone put some light on this and help me reach the solution?
    Thanks in advance.
    Regards,
    Chaitra

    Dear Chaitra,
    When displaying a characteristic by key and text, the BEx Query Designer automatically displays the shortest available text from the InfoObject's text table. BEx automatically selects the shortest text available from an InfoObject’s text table when displaying a characteristic by key and text. When a text table has a short, medium, and long text field, the short text displayed.
    Try by changing it display as property to long/medium text.
    Plz revert back for if still had any doubt.
    Regards,
    RK

  • Adjustments made via a plug-in not visible in viewer

    This just started happening, and I'm not sure the cause, if you have any ideas I would appreciate hearing them.
    If I make an adjustment with a plug-in (for example Nik CEP), after making the adjustments in the plug-in and saving the changes, i'm returned to the viewer but the adjustments aren't renedered into the viewer image.
    If I change the view from the Viewer to the Browser or even the Split Viewer, I can see the changes made via the plug-in.
    Oddly enough, if I choose to Crop the image (by pressing the C button), the crop tool and small context window come up, and the image immediately changes so I can see the changes made by the plug-in.
    If I simply close the Crop tool without cropping (by x-ing out the small context window), the image reverts and the changes made in the plug-in are again not visible.
    I've tried repairing the permissions and the database.
    I didn't think this would help because I have a few different libraries, and this same behaviour occurs within each.
    I've created a new library and was able to reproduce this (mis)behaviour.
    Just to be thorough I also removed the preferences and presets.
    I also reinstalled, but this didn't help either.
    I'm on Lion, but have the CD; Apple's posted instructions didn't quite cover this scenario.
    The only thing that seemed out of the ordinary with the reinstall was that when I issued the following command (from Terminal):
    sudo pkgutil --forget com.apple.pkg.Aperture
    I received a message back that said something like com.apple not found in /
    Any ideas what causing this problem and how it can be corrected?

    Probably it is the same same bug that is causing edits in an external editor not to show, see this support article:
    http://support.apple.com/kb/TS4237
    As a work-around, to make the edits show, select any adjustment, and turn it on and off again.
    Regards
    Léonie

  • Importing text from XML file, "\n" not working

    Hi I'm currently trying to set up my game so it pulls in all text from an external XML file (to make switching between different languages easier). The problem is that on several occasions I need to use the special code "\n" to start a new line (for formatting purposes) but when I'm pulling the text in from the XML file this is not starting a new line any more - it is just appearing as normal in the text. (e.g "Here is some \n example game text") How do I get around this?
    Any help here appreciated, I'm supposed to be finished everything by tomorrow so I need suggestions asap haha Thanks.

    I don't see how I can be setting it wrongly, I have the exact line:
    XML.ignoreWhitespace = false;
    Before this I tried myXMLDocName.ignoreWhitespace = false; (before I realised it was a static function)
    This line is placed immediately after I have loaded my XML document and assigned it to a variable. e.g.
    private function XMLLoaded(e:Event):void
                trace("XML Loaded");
                MyGameGlobalVars.xmlDoc = new XML(e.target.data);
                XML.ignoreWhitespace = false;       //previously: MyGameGlobalVars.xmlDoc.ignoreWhitespace = false;
                xmlLoaded = true;

  • How come I can see my div in design view but not in live view

    Hi,
    I have a div ID called "portfolio" that I can see in design view but not live view or on a browser. It's a little pink square and I want that square round also.
    I ran it through validator. It picked up some things in the style.css which I changed and the boilerplate.css that I did not. Because I thought DW auto creates code for boilerplate because I don't enter that code myself.
    It's also rejecting a lot of webkit code but this seems like standard webkit code that works elsewhere on the page.
    BTW: at what point does this brutal hand coding pay off in money and less heartache when Wordpress looks cleaner and is so much easier to use? I feel like I barely know HTML or CSS in terms of translating vision to reality and with all-browser functionality after months and months of on-line classes. How long are the pros at it till they reach a watershed point?
    here's my address: http://www.adjacentdimensionsmedia.com/home.html
    Here's my html:
    <body>
      <div class="gridContainer clearfix">
        <div id="div1" class="fluid"><img src="adtitle2.png" width="700" height="80" alt=""/></div>
      <div class="fluid"><div class="box-shad"><a href="index.html"></a></div>
      </div>
        <div id="portfolio">Portfolio</div>
    </body>
    Here's my CSS:
    .box-shad {
      margin-top: 200px;
      margin-left: 100px;
      width: 900px;
      height: 700px;
      display: block;
      background-image: url("images/Big-tree-trans1.png");
      background-size: 900px 700px;
      -webkit-box-shadow: 15px 15px 15px #000000 inset;
      box-shadow: 15px 15px 15px #000000 inset;
      -webkit-border-radius: 50%;
      border-radius: 50%;
      position: fixed;
    .box-shad a {
        display:block;
        width:900px;
        height:700px;
    #portfolio {
      width: 100px;
      height: 100px;
      margin-top: 0px;
      margin-right: 200px;
      margin-left: 200px;
      margin-bottom: 0px;
      border-radius: 75%;
      -webkit-border-radius: 75% 75%;
      background: pink;
      top: -300px;
      position: relative;

    The top:-300 is putting that div above the top of the browser viewport. Fix that and you'll see the div.

Maybe you are looking for