Text gets Lost

Hi Guys,
I have a slideshow which dynamically loads images and
captions from the xml file. Everything works great if the html page
in which the swf file is embedded and the respective swf file are
located on the same domain. But if I try to use the embed code on
some other page which resides on completely different domain, I am
not able to view any captions, everything else works just the way
it should. I am using embed fonts, may be I have to change the
approach for that. But how?, is the question.
Thanks a lot.

I am sorry for the delay in reply.
I tried out what you suggested but I it didn't work for me.
I have one more input for you. I am not even able to see a
static text field on the stage which do not use any embed fonts.
Font for this static field is arial. It works fine if the swf and
the html page are at the same location (web server), but if I try
to access the swf file in the html page which is not at the same
location I see nothing.
Kindly let me know if you want me to provide some more
specific inputs on this issue. I will do that.
Thanks

Similar Messages

Blank spaces at the end of an IDoc text field get lost when posted to R/3

Hi Guys,
I am facing the following issue:
In an XML file-to-Idoc scenario, there are spaces at the end of a text field in the inbound XML file, which I can see when I open the inbound file with a text editor like notepad, and they are kept after XI mapping is executed (I can see them in message mapping simulator). However, it seems that these spaces get lost once the IDoc is posted to SAP R/3 and they are not visible on SAP R/3 side.
Do you have any idea ? Thanks.
Best Regards,
Evaggelos Gkatzios

That means SAP is removing the spaces from IDoc fields, where you spaces are not allowed. Does it create any problem?
Thanks,
Nabendu.

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1. The problem is that after inputing the formatting gets lost. Taking in account high popularity of Wordpress I suppose the problem is quite serious.

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1.
The problem is that after inputing the formatting gets lost.
Taking in account high popularity of Wordpress I suppose the problem is quite serious.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Clipboard not working -> [http://kb.mozillazine.org/Clipboard_not_working]
* Rich Text Editing -> [http://kb.mozillazine.org/Rich_text_editing]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
Check and tell if its working.
Might not be related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Text sending problems - random texts getting through

Has anyone had this problem? i have a 3g and have the latest software 3.1.3. one particular number is not receiving all my texts. I get no error message, the bar shows the message was sent and my friend simple does not receive all the message. it is pure random, happens any time of day, any location i am in and any length of message. sometimes as little as one a day goes missing and sometimes as much as 5 a day. Both phones have had new sim cards put in and I have even had my iphone restored (and not from a backed up version of the phone) and swapped out. the lost texts even happened when the iphone was in factor settings with no aps, music or pictures in it. I have been transferred back and forth from att and apple. trouble tickets were opened on both numbers by att and att says there is no problems with the network and that all texts are properly delivered and there is no block on either number - yet messages still get lost. we've both have removed each other's contact and replaced the contact as a 10 digit number, have been taken out and put back in network and all our settings are correct according to att. both of us have not had any problems with texting other people - just each other. does anyone know why this is happening and what i can do?

Generally, the failure of a text message is a carrier issue. However, as you have stated, you have worked with the carrier and with Apple, have restored your phone and replaced your SIM. I'm not aware of any other troubleshooting that can be done. The hardest part about troubleshooting the issue is that as you said, it happens randomly.
Is the other phone an iPhone as well? Does the problem exist if you respond to a text, versus creating a new text? Again, since you have already replaced the SIM, had AT&T check your account, and have restored the iPhone as a new phone, I'm not aware of any other fix.

Parameter of Source-portion of url gets lost

Hi Expert,
following Situation:
Default List-View-WebPart from a custom List added to a Enterprise-Wiki-Page.
First column in the List-View is the edit button to open the related edit-Form.
Because of a custom Edit-Form which is not set as the default for edit i have to relink to my specific Form.
I have done this by this script which is included by Script-Editor-WebPart:
var tags = $('a[onclick*="84858E12"]');
if(tags)
tags.each(function ()
var att = $(this).attr('onclick');
if(att)
if(att.match(/ID=([0-9]*)/))
var id = $(this).attr('onclick').match(/ID=([0-9]*)/)[1];
var bo = $(this).closest('td').next('td').find('a').text();
if(bo)
$(this).removeAttr('onclick');
$(this).attr('href', '/Lists/Leads/LeadEdit.aspx?ID=' + id + "&BO=" + encodeURIComponent(bo));
$(this).attr('onclick', 'GoToLink(this);return false;');
If i click a edit button to open my edit form everything works fine and the URL has correct values. The source Portion works fine if i close the edit form (save or cancel). So far so good.
In last mentioned edit form i have another List-View-WebPart (Added through SharePoint-Designer) which holds data of a related list. Filter is working fine here. For this List-View i also have to relink the edit button to another specific edit form. I have
done this in the same way as i did it before. The important part of the script:
$(this).click(function(e)
e.preventDefault();
var currentid = $(this).attr('href').match(/ID=([0-9]*)/)[1];
var encbo = encodeURIComponent(getBO());
$s = "/Lists/Com2Know/Edit.aspx?ID=" + currentid + "&BO=" + encbo+ "&Source=" + source + "&BO=" + encbo;
location.href = $s;
This also works fine. Source Portion is shown and correct. If i copy the source Portion and paste it to a new browser tab it is working fine. But if i Close this edit form (save or cancel) a Parameter of the source portion of the URL gets lost somehow and
now i'm not there where i wanted to be. The URL is as follows (changed hostheader to ...)
http://.../Lists/Com2Know/Edit.aspx?ID=86&BO=LE%2F2014%2F2000084&Source=http://.../Lists/Leads/LeadEdit.aspx?ID=84&BO=LE%2F2014%2F2000084
So i should go to http://.../Lists/Leads/LeadEdit.aspx?ID=84&BO=LE%2F2014%2F2000084
but i end up here: http://.../Lists/Leads/LeadEdit.aspx?ID=84
So my Parameter BO is missing.
Do i miss something from specification?
With Kind regards,
Ronny

Sorry Folks, i got it myself and i hope it is useful for somebody else.
Just mask the ampersand for Parameters in source Portion with %26
So in my case: source + "%26BO="
Kredits to Marc D Anderson. Thanx!
Ronny

Links set as objects and text are lost

Currently I am using Acrobat X (Trial) before purchasing it for my organisation. It seems that when I try to convert a Word 2003 document containing object and text links, most of them are being lost during the conversion to pdf using Acrobat X. I went through certain forums and found that this seems to be a known issue. Is there a workaround or a bug fix for these types of problems? Thanks in advance.

I am using the PDF Plugin (icon in Word 2003). Still, most of the object links are getting lost. I am not printing directly to the PDF printer.

Long Text getting truncated in IW32

We are using BAPI_ALM_ORDER_MAINTAIN to createa orders with long text.
When reviewing the long text in the Office integration screen, We can see that all text is there.
If, a user modifies the long text in the long text window of IW32, any text that does not display is lost when the order is saved
If a user modifies teh long text in the office integartion screen, no text is lost.
Any help on the cause and how to prevent this would be appreciated.
Scott

hi ,
thanx for the reply,
text gets truncated in print preview itself.
i put breakpoint in se38 and in sapscript.
in se38 the variable shows full text, but in sapscript, it gets truncated.
coding in sapscript
/:           POSITION WINDOW
/:           POSITION XORIGIN '-0.5' CH YORIGIN '-0.10' LN
/:           SIZE WIDTH '+0.3' CH HEIGHT +0.85 LN
/:           BOX HEIGHT '9.0' LN FRAME 10 TW
/:           PERFORM PO_TEXT_DISP IN PROGRAM ZTEST_DRIVER
/:           USING &EKKO-EBELN&
/:           CHANGING &PO_TEXT&
/:           ENDPERFORM
/:           IF &PO_TEXT& NE ''
S7           &PO_TEXT&
/:           ELSE
/:           ENDIF
regards
senthil

Soap faultcode and faultstring getting lost

Hi,
I'm having a problem with Adobe Flex not returning the soap
fault details that is being returned in the Soap Fault.
I am using Flashplayer 9,0,16,0 , Adobe Flex Builder 2
Version 2.0.14359 and XFire 1.2 for Webservices.
The Soap Request is :
<SOAP-ENV:Envelope xmlns:xsd="
http://www.w3.org/2001/XMLSchema"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xmlns:SOAP-ENV="
http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<saveUser xmlns="
http://ws.raid.aem.com.au">
<ns0:in0 xmlns:ns0="
http://ws.raid.aem.com.au">
<ns0:administrator xmlns:ns0="
http://vo.ws.raid.aem.com.au">false</ns0:administrator>
<ns0:email xmlns:ns0="
http://vo.ws.raid.aem.com.au">[email protected]</ns0:email>
<ns0:firstName xmlns:ns0="
http://vo.ws.raid.aem.com.au">John</ns0:firstName>
<ns0:id xmlns:ns0="
http://vo.ws.raid.aem.com.au">1</ns0:id>
<ns0:lastName xmlns:ns0="
http://vo.ws.raid.aem.com.au">Smith</ns0:lastName>
<ns0:password xmlns:ns0="
http://vo.ws.raid.aem.com.au">secret</ns0:password>
<ns0:permissions xmlns:ns0="
http://vo.ws.raid.aem.com.au"/>
<ns0:username xmlns:ns0="
http://vo.ws.raid.aem.com.au">jsmith</ns0:username>
</ns0:in0>
</saveUser>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The Soap Respones is :
<soap:Envelope xmlns:soap="
http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="
http://www.w3.org/2001/XMLSchema"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>This message gets
lost!</faultstring>
</soap:Fault>
</soap:Body>
</soap:Envelope>
And the fault that comes through in Flex is :
RPC Fault faultString="HTTP request error"
faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent
type="ioError" bubbles=false cancelable=false eventPhase=2
text="Error #2032: Stream Error. URL:
http://localhost/raid/services/UserManager"
URL:
http://raid.aemgroup.com.au/raid/services/UserManager"
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::faultHandler()
at mx.rpc::Responder/fault()
at mx.rpc::AsyncRequest/fault()
at ::DirectHTTPMessageResponder/errorHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/flash.net:URLLoader::redirectEvent()
The soap faultcode and faultstring are getting lost.
Anybody have this problem or know what is going on?
Thanks,
Daniel

Hi ! I have exactly the same problem...
I can't (or don't know how to) access to faultstring and
faultcode generated by the webservice.
Here what I found :
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=3c6784bc
I use a Webservice generated by PHP5 and I don't know how to
change the status code of a response...

Imessages getting lost

I have 2 iPhone 4 on my AT&T account. And, it is only with these iPhones do I seem to have this issue. iMessages are not always received between the 2 phones and there is no notification of failures, instead, I ask the other person, did you get my text and they did not. Both iPhones use the same apple ID, but I can't imagine that's the issue. Any ideas on why some iMessages are just getting lost?

I think iMessage is like the Bump App. It could be akin to an immediate "peer to peer" type arrangement coordinated by Mother Apple.
Your device (iPod, iPad, iPhone) tells Mother Apple, via the internet (Wifi or 3G) that mobile No. or an eMail address is "online" and can receive messages.
People who want to message you from their devices are doing the same thing in "advertising" their presence and availability to Mother Apple with their "addresses" which could be phone numbers or eMail addresses.
When you want to send a message then it basically goes via Mother Apple who matches you up and makes the connection. If the other party drops off the internet during the messaging session for any reason, then, whilst your message is considered by Mother Apple to be "delivered" it is not actually received. I don't think Mother Apple have the facility to "hold" or store messages for later delivery, they are just the "exchange". Mother Apple could, however, snoop on conversations and this might be in the fine print of the terms and conditions.
If iMessage (ie an internet connection) is not available, then the SMS will most likely be sent as per the 3G network.
Re-registering your device is probably not a bad idea !

I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet". Did my WiFi connection also get lost?

I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet." Did my iphone's WiFi connection also get lost with the Contacts, Mail and Text Messages? When I tried the software update, as recommended by Winston Churchill, the iphone was connected to my desktop which is connected to the Internet.

You can't use your computers Internet connection to update your phone from the phone itself. If you want to use the computers Internet connection to update your phone you must update it through iTunes.

Pasted images in work item HTML fields sometimes get lost

I have the curious problem that sometimes the images which have been pasted to HTML fields of work item (e.g. Description field) get lost. SQL data analysis showed that this only happens in ~4% of the cases (16 missing, 443 ok).
When looking at HTML text in field you realize that there are empty image tags.
<img alt="">
In correct work items you always (sure!) have correctly set image tags.
<img style="width:665px;" src="?FileNameGuid=06686f67-9fe1-4a73-8ed3-98b00a20e3e6&FileName=temp1429775841167.png">
<img height=204 style="width:352px;height:166px;" src="?FileNameGuid=06686f67-9fe1-4a73-8ed3-98b00a20e3e6&FileName=temp1429775841167.png">
Within web access it then looks like the following when you click into work item field:
I can't reproduce the behavior. Might it be due to different web browsers (as far as I know IE, Chrome and Firefox are used)?

Hi Robin,
Thanks for your post.
What’s the version of your TFS and VS?
According your description, it seems the image HTML text not stored correctly in TFS database for that work items. If you paste the image the same ‘issue’ work item’s Description field again, the image can shows correctly in this same
work item?
Do you mean this issue only happened when you paste image to work item field in TFS Web Access? If you paste image to work item field using VS, all the work items are correctly?
To resolve this issue, I need to reproduce it in my TFS Server environment, please try to filter out how this issue will happen in work item field in your TFS Server environment.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Connectivity with SQL server getting lost

Hi,
When the SQL database is restarted, the connection of the web application gets lost and the tomcat has to be restarted manually in order to reset connection with the database. Please let me know if there is a way by which the connection can be re-establised without manually restarting the tomcat.
Thanks and regards
Lipi

I am using oracle 11gR1 on windows 2003.
This is my initaccessdb.ora(Path HS/ADMIN)
HS_FDS_CONNECT_INFO = ACCESSDB
HS_FDS_TRACE_LEVEL = OFF
Listner File
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = APPSERVER)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=PLSExtProc)
(ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1)
(PROGRAM=extproc)
     (SID_DESC =
     (SID_NAME = accessdb)
(ORACLE_HOME = E:\app\Administrator\product\11.1.0\db_1)
(PROGRAM = ACCESSDB)
     (ENVS=LD_LIBRARY_PATH=D:\)
TNSNAME.ORA
ORCL =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.0.14)(PORT = 1521))
     (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME= ORCL)
ACCESSDB =
(DESCRIPTION=
     (ADDRESS =(PROTOCOL = TCP)(HOST=172.16.0.14)(PORT=1521))
          (CONNECT_DATA =
          (SERVICE_NAME=ACCESSDB))
               (HS = OK)
I successfully completed all steps as mentioned in your sending links documents but when i test my dblink query it gives the error message
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> conn ahmed
Enter password:
Connected.
SQL> drop database link test;
Database link dropped.
SQL> create database link test using 'ACCESSDB';
Database link created.
SQL> SELECT * FROM EMPLOYEE@TEST;
SELECT * FROM EMPLOYEE@TEST
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from TEST
Note: Please tell me that should i install ODBC driver ("Microsoft Access Driver *.mdb).If this should be installed then i have done correctly.
Thanks

How do I use the Verizon Service & Protection app to locate my phone if it gets lost?

The Verizon Support & Protection app (VZ Protect) is installed on my phone and is supposed to help me if my phone is lost or stolen by allowing me to find it on a map, lock it, erase my data from it, etc. But I found it nearly impossible to figure out what I should do in the event that actually did get lost or stolen.
I logged into my My Verizon account from my computer (which is probably what I would do if I lost my phone), but unfortunately there isn't anything on the site to help a person who has actually lost their phone or had it stolen to quickly and easily locate it. Most of the links I found were only promoting Verizon's services and the app, but nothing on how to use it.
I tried searching for things I might type if I had actually lost my phone (like, "missing phone", "stolen phone", "find lost phone"). I had to go into the "How to Use Guide: Verizon Support & Protection" page, which I was only able to find on the Verizon Support & Protection FAQs page), in order to find a link that told me I had to go to the Verizon Support & Protection App website to use this service.
There really should be something more obvious right on the My Verizon site.

Purchase a replacement remote.
The remote is required for configuring the ATV and setting up the remote app on iDevices.

Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Hyperlinks from other placed indd documents or pdfs getting lost after export to PDF

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

Text gets Lost

Similar Messages

Maybe you are looking for