Text getting jumbled

i have a vendor working on a mac through an online system where she enters info into a webform then prints the entire thing to pdf. i have about 100 other vendors who do this with no issues, but all are on pc's, although i dont think the OS is the problem. whenever i try to edit a pdf printed down from this persons webform and then edit it for my business the text gets jumbled at various stages. It can happen when saving, copying something from one page to another, putting any text in at all. I dont notice the jumble right away but when i move to another page from the one i was editing, then i see the issues. Acrobat is completely updated working on windows 7 64 bit that is completely up to date as well. we are using IE8,9 and the most recent version of Firefox to test but this happens on every machine we try. Can anyone help?

Nope,
If I understand - there is a fillable pdf hosted online, or there is a webased submission which is funneling the data into a pdf.
That pdf has a default font assinged for the fields.
If this is the case, this might be better posted to the Acrobat Forms Forum
http://forums.adobe.com/community/acrobat/forms
wondergoat77 wrote:
online system where she enters info into a webform then prints the entire thing to pdf
That print engine may be able to embedd the fonts complete. Change the "Subset when fonts used is less than" to 0%

Similar Messages

Text gets jumbled up after publishing.

After publishing my text gets illegable. Sentences are written over each other. Mabybe my texts are too long. Some pieces are ok but at the end of the text trouble starts.

Perhaps check in iWeb that you don't have text boxes that are overlapping each other. This can be a cause. Also, if you know that you have a long piece of text to publish, just use one text box rather than a few. This makes more sense and it is less likely that any box will overlap.

Text and table structure getting jumbled up in the smartform output

Hi all ,
While viewing the print preview of a smartform output , i am facing a strange issue.
The hardcoded text is getting jumbled up .For eg:"As soon as possible" becomes " as possible . soon as"
The structure of the table is also getting reversed.That is the table is now getting displayed with the last couloum first.The data in the table is also coming in the reverse order.
While executing the smartform directly , the layout is coming in the proper order.But while executing this through a transaction (FINT) , this issue is coming up.The print program is a standard program.
I have tried deleting the window , copying it to a new smartform etc.I have also tried in different systems to check whether if it is an issue with the system.
If anyone has faced a similar issue , please let me know how to solve it.Thanks a lot in advance.
Regards,
Rashmi

Hi
Please check the Printout rather the print Preview. and also check the Structure/table entries also that u printing and also if u r using template, then check the assignment 1 of 1 , etc to the texts.
surya

Check printing: Amount in words is getting jumbled

Hi,
I have a problem in displaying amount in words in check.
I am getting the amount in words through functuion module SPELL_AMOUNT correctly,i.e,(for example,110,002 ) ONE HUNDRED TEN THOUSAND TWO.
After getting the amount,i am concatenating the words 'ONLY' amount 'RIYALS'.In program it is concatenated correctly.Expected output is RIYALS ONE HUNDRED TEN THOUSAND ONLY.
But when seen on screen,the words are getting jumbled.
It is getting displayed as TWO RIYALS ONLY ONE HUNDRED TEN THOUSAND.
(Note: My form is in arabic,since i want to display vendor name in arabic,and rest of the check in english).
Please help me with some solution.
Thanks & Regards
Seshagiri.

Hi Dishant,
Sorry for the delay.I am pasting the code below:
Code in print program:
Global data:
data: gv_riyals(6) value 'RIYALS', "RIYALS
      gv_only(4) value 'ONLY',
      gv_halalas(7) value 'HALALAS',
      gv_and(3) value 'AND'.
Local data:
        data: lw_dummy(25),
              lw_fraction(2),   "for fraction part of amount in HALALAS
              lw_integer type i.
        if spell-decimal is initial.
          clear: spell-decimal, dg_100.
        else.
           lw_integer = spell-decimal / 10.
           lw_fraction = lw_integer.
           concatenate '(' lw_fraction '/100)'
                   into lw_dummy. " SEPARATED BY space.
           condense lw_dummy.
           clear dg_100.
           dg_100 = lw_dummy.
        if not spell-word is initial.
          condense spell-word.
          gv_spell_word(50) = spell-word. "Amount in RIYALS
        endif.
     endif.
          call function 'WRITE_FORM'
            exporting
              window = 'PAY_DOC'
              element = 'PAY_DOC'
            exceptions
              window = 1
              element = 2.
          if sy-subrc eq 2 and
            ( err_element-fname ne t042e-zforn
            or err_element-fenst ne 'PAY_DOC'
            or err_element-elemt ne 'PAY_DOC' ).
            err_element-fname = t042e-zforn.
            err_element-fenst = 'PAY_DOC'.
            err_element-elemt = 'PAY_DOC'.
            err_element-text = text_530.
*--Code in the script:
/: IF &DG_100& EQ ' '
L1 &gv_only(C)&,,&gv_riyals(C)&,,&spell-word&
/: ELSE
L1 &gv_riyals(C)&,,&gv_spell_word(C)&
L1 &gv_only(C)&,,&gv_halalas(C)&,,&dg_100(C)&,,&gv_and(C)&
/: ENDIF
Thanks & Regards
Seshagiri.

Text getting cut off when printing to PDF from Excel

Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:20:28 -0700
From: [email protected]
To: [email protected]
Subject: Text getting cut off when printing to PDF from Excel
Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy
>

When I type my text gets highlighted and then deleted.

I am having a problem with typing. When I type fast my text gets highlighted and then deleted or typed over. Im not sure what is wrong. I think it is either a trackpad or keyboard. Any help be great!!

The trackpad on the MB and MBP have a larger surface with more sensors than on previous laptops. As a result, when we type we have other fingers, thumbs etc. making contact with the trackpad and the trackpad receives input we don't intend. It happens to me quite often. So I hit Command + Z to undo and reposition the cursor. We need to train ourselves so that we keep our hands, palms, thumbs or other unnecessary body parts away from the trackpad while typing.
cornelius

When I transfer songs from Camera Roll to Shared Album, photos get jumbled. Why and how to fix?

I've placed anywhere from 5-250 photos into the shared album at a time, and every time they get jumbled in no order whatsoever. Could you please advise? Thanks!

iPhone User Guide (For iOS 6 Software)

PR Short text getting copied to the Item text

Hi All,
I have a scenario in which i need the PR short text getting copied to the Item text while creating a PR. Please let me know if there are any settings for the same.
Thanks,

PR short text you mean line item short text field beside material is getting copied?, in such cases make sure that Item text copying rule. from where its getting copied from SPRO>Material Management> purchasing>PR>Texts for Purchase Requisitions >Define Copying Rules.
regards,
qsm sap

Text getting cutoff in a varchar2

I am running Reports 6.0.8.24.0 32 bit on Oracle 9i.
I am having a problem with a large varchar2 field not staying within the layout, on the right hand side of the layout.
The text gets cutoff on the right side. On the preview it all looks ok, but on paper 1 to 4 letters are cutoff.
I have tried 4 different laser printers and an inkjet printer, but all have the same result.
I have played around with fonts and font size with limited success, but still cutting off text.
Is there a best font and font size for a varchar2 field within Oracle reports?
I have played around with the margins with limited success, but still text getting cutoff.
I have tried changing the elasticity settings and layout size, but no change with text getting cutoff.
The varchar2 receives its text from a MS word document. I have a button trigger that opens the MS word document and kicks off a macro in MS word.
The macro in MS word does a select and copy of the needed text. The trigger then closes MS word and paste into the varchar2 field.
The varchar2 is size 4000.
(I wish MS word had a character for soft returns, then this would have been fixed months ago.)
Thank you,

I think I have found the answer on my own.
I developed my own algorithim for when the word wrap occurs.
See code below.
I added this code to the button trigger on my Oracle Form the copies in the text from MS Word.
tmp_file := :query_recv_accessions.diag_summary; --get the text from the field on the form
string_length := LENGTH(tmp_file);
clear_field; -- clear :query_recv_accessions.diag_summary
current_char := SUBSTR(tmp_file, current_pos, 1);
WHILE current_char IS NOT NULL
LOOP
IF current_char = lf THEN --lf is a variable that contans the ascii value for a line feed. if a line feed is found then resest the character count to zero.
     char_count := 0;
ELSE
     IF current_char = ' ' THEN
     last_space_pos := current_pos; -- remember the position most recent space
     END IF;
     char_count := char_count + 1;
     IF char_count = 102 THEN --102 is as many characters that will fit on the paper across.
     tmp_file := substr(tmp_file, 1, last_space_pos)||lf||substr(tmp_file, last_space_pos + 1, string_length - last_space_pos); --insert a line feed
     current_pos := last_space_pos;
     char_count := 0;
     END IF;
END IF;
     current_pos := current_pos + 1;
current_char := SUBSTR(tmp_file, current_pos, 1);
END LOOP;
:query_recv_accessions.diag_summary := tmp_file;

Long Text getting truncated in IW32

We are using BAPI_ALM_ORDER_MAINTAIN to createa orders with long text.
When reviewing the long text in the Office integration screen, We can see that all text is there.
If, a user modifies the long text in the long text window of IW32, any text that does not display is lost when the order is saved
If a user modifies teh long text in the office integartion screen, no text is lost.
Any help on the cause and how to prevent this would be appreciated.
Scott

hi ,
thanx for the reply,
text gets truncated in print preview itself.
i put breakpoint in se38 and in sapscript.
in se38 the variable shows full text, but in sapscript, it gets truncated.
coding in sapscript
/:           POSITION WINDOW
/:           POSITION XORIGIN '-0.5' CH YORIGIN '-0.10' LN
/:           SIZE WIDTH '+0.3' CH HEIGHT +0.85 LN
/:           BOX HEIGHT '9.0' LN FRAME 10 TW
/:           PERFORM PO_TEXT_DISP IN PROGRAM ZTEST_DRIVER
/:           USING &EKKO-EBELN&
/:           CHANGING &PO_TEXT&
/:           ENDPERFORM
/:           IF &PO_TEXT& NE ''
S7           &PO_TEXT&
/:           ELSE
/:           ENDIF
regards
senthil

Text getting squished on convert to button

Hi,
Im trying to make some buttons. Ive made a primitive rectangle and a text object with rosewood std font. Then I put the text over the rectangle the rectangle is a little bigger ussualy about a pixel more in width and height than the text in size.
The problem is when I do convert to symbol(Button) the text gets all squished, I have no idea why.
Anyone know what is going on?
Thanks

Not sure I understand I need it to be a button nnot a movieclip because Im going to use it as a button an need the differenet states (up,down,over)

Blocks of text getting scrambled...

At times when I'm on the net with my MBP
and I two-finger scroll through
message boards, large blocks of text get
moved around and scrambled like a mixed up
Rubik's Cube.
Anyone else experiencing this on their MBP?
Is it a fault of the video card or the intel version of safari?

Yes, it happens to me too. I posted a thread about this and didn't get many responders. It isn't just Safari--I had issues with the included Comic Life application leaving artifacts on the screen as well. It is most likely an issue with the driver for the video card, and is fixable via a software rev whenever Apple gets around to it. There isn't much you can do in the mean time.

Text gets cut off when exported to PDF

When I export my report to PDF some of my text gets cut off where it would meet the right edge of the text box by 1 or 2 letters.
This only happens when I export to PDF through my web application or when I export it throught the Report Manager URL
If I export it on my local copy of SSRS then it shows up fine without the text getting cut off

Hi,
You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
Please mark this post as Answered if this post helps to solve your query.

Bug with part of text getting chopped off?

I've been getting this on and off... the last letter of some text gets chopped vertically.
Take a look at the last letter of "PORTFOLIO" and "ABOUTUS" here.

Tried them as readability and animation... they are actually worse as readability.
The strange thing is, each letter is an MC, so the two S's in ServiceS are actually the same MC as the S in aboutuS, yet its only the latter mentioned that is bugged.

Text getting cut,while generating the pdf dynamically.

Hi All,
I have a Text Box ,which has a text of ard 19 lines of Font:Arial Narrow and Size:9 in pdf.(Height:131.02pt and width:755.266pt of the text box)
Also I have same in the xdp.
When i dynamically generate pdf using Adobe Document Services(ADS),the text gets cut and the Font also changes.
Kindly help me out.
Thanks and Regards,
Vishal Doshi.

It looks like unexpected font fallback happened. Do you have "Arial Narrow" on the machine running ADS or do you specify forcing font substitution?
Henry

Text getting jumbled

Similar Messages

Maybe you are looking for