Text has different look from one text box to the next on same page issue
Hi,
I'm in the process of creating a new site that contains quite a bit of text from a book I wrote. I've taken the text from the original source, put it into text editor and made it into plain text. From there, I've pasted it into the iWeb text boxes and adjusted the text look (font is Arial, justified alignment). When viewing it in IE (probably others?), one block of text looks different than others.
http://www.goaheadtakethewheel.com/Test13.html
I've verified that the font size and other options are all the same on iWeb. For the life of me I can't seem to figure this out. The only way I can think of possibly resolving this is to re-type each section from scratch. Given that there are about 75 wordy pages...UGGGG!
Any suggestions or ideas? Thanks for your time and help!!
Dave Gran
You could first try deleting your iweb preference file <com.apple.iWeb.plist> it is in your Library/preference folder.
To create a new domain file, first save your current file in a safe place, such as an external hard drive, burn to a CD, etc. By default it is in your User/Library/Application Support/iWeb folder. All your work is in this file, keep it safely backed up, if you lose this file you lose all your work, you can't restore from the published web site. When you get this file saved safely off your computer and open iWeb it will create a new empty domain. Once you have the new file created you can bring the old file back to the computer. You can put them side by side in any folder (give them different names so one won't replace the other) At this point you can double click the domain file itself to open iWeb. You could try cut and paste between the two domains. I'm not sure this will solve the problem but you could try it on one page, publish to a local folder and see if it helps. Sounds like a lot of work.
Which ever domain file was last used is the one iWeb will subsequently open unless you double click the actual domain file to open iWeb. Be careful and good luck.
David
Similar Messages
-
Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC
This is planned to be fixed in the next release.
-
how do I get an object to rotate as it moves up and down or left and right from one time key to the next ?
I'm partial to this series:
After Effects basics tutorials by Andrew Devis
The subject matter is very clearly-defined by topic.
And AE shouldn't up & quit on you... but you haven't breathed a word about your system or your AE version. Please share. -
How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09? I understand that I should not have a page break mid paragraph but that is what I want.
Hi stephanie,
These are unrelated questions/statements.
Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
Regards,
Barry -
I don't seem to be able to move from one simple keynote slide to the next.
I just have text on each - like notes for a presentation.Howdy tommmy,
To go to the next slide in a Keynote for iOS presentation, tap on the screen with one finger. See this article for information about gestures in Keynote -
Keynote for iOS (iPad): Touchscreen basics for Keynote
Tap
Using one finger, quickly and firmly touch the screen and then lift your finger. Use this gesture to select an object or activate a button. You also use this gesture to advance to the next slide when playing a presentation.
Thanks for using Apple Support Communities.
Best,
Brett L -
How do I move from one Keynote slide to the next in ios8
I don't seem to be able to move from one simple keynote slide to the next.
I just have text on each - like notes for a presentation.Howdy tommmy,
To go to the next slide in a Keynote for iOS presentation, tap on the screen with one finger. See this article for information about gestures in Keynote -
Keynote for iOS (iPad): Touchscreen basics for Keynote
Tap
Using one finger, quickly and firmly touch the screen and then lift your finger. Use this gesture to select an object or activate a button. You also use this gesture to advance to the next slide when playing a presentation.
Thanks for using Apple Support Communities.
Best,
Brett L -
How to copy line items from one expense report to the next
I travel to the same project/destination every week so in PR05, I was able to just copy the previous expense report for the new week and edit the expense values. Now, when I book travel, the air line booking starts a new expense report entry.
Is there a way to copy the employee-paid expenses to the GetThere-generated trip entry expense report, i.e. just copy the line items from one expense report to another that already exists. I guess that would be a merge function.Hi Tom,
Here are two alternative solutions:
Alternative 1:
If you copy the expense report before you book the services (flight, hotel …)
in GetThere, then the airline or hotel bookings will not start a new expense
report but will be assigned to the copied expense report.
Alternative 2:
This alternative is a bit laborious.
Shift the start date and end date of the expense
report that was automatically created by
your flight booking for next week (e.g. Calendar Week (CW) 47) to the week after next week (e.g. CW 48).
Copy the expense report of the previous week (e.g.
46)
Afterwards open the expense report that you
moved to CW 48 and click on the tab strip itinerary
Now assign the bookings (flight, hotel …) to the
expense report of CW 47 by clicking on the button assign to existing trip
Later delete the expense report in CW 48
Get back to me if you have any questions concerning the alternatives outlined
above.
Note:
These solution alternatives are only available for customes using HTML5 UIs. -
Can Apple TV fade from one music title to the next?
Playing my mysic with iTunes I can set it to fade softly from one title to the next, without pausing between the tracks.
I can't find this setting in my new Apple TV and the Apple TV seems unaffected by my settings in my iTunes. How can I tell my Apple TV to behave like I want?Thank's a lot for your quick answer.
I hope though, this feature will be implemented via software update sometime. -
I created a gapless album by joining the tracks on a disc in a multiple disc audiobook. I want my classic Ipod to turn off after it finishes an album but it continues on to the next disc (album) in the audiobook automatically. When it finishes the multiple discs contained in the compilation of one album it continues to the next audiobook. This is great when listening to the audiobook in a car while driving, but not when I use the Ipod to put me to sleep at night. Why does it do this?
Did you put the library on the external drive, or just the media folder. See this migrate iTunes library post for the way this ought to be done and recovery tips for when it is no longer possible.
tt2 -
ITunes skips from one radio station to the next one
I listen to radio stations via iTunes while I work. After an hour or so, the station skips to the next one in the list. What's going on?
Hi Tom,
Here are two alternative solutions:
Alternative 1:
If you copy the expense report before you book the services (flight, hotel …)
in GetThere, then the airline or hotel bookings will not start a new expense
report but will be assigned to the copied expense report.
Alternative 2:
This alternative is a bit laborious.
Shift the start date and end date of the expense
report that was automatically created by
your flight booking for next week (e.g. Calendar Week (CW) 47) to the week after next week (e.g. CW 48).
Copy the expense report of the previous week (e.g.
46)
Afterwards open the expense report that you
moved to CW 48 and click on the tab strip itinerary
Now assign the bookings (flight, hotel …) to the
expense report of CW 47 by clicking on the button assign to existing trip
Later delete the expense report in CW 48
Get back to me if you have any questions concerning the alternatives outlined
above.
Note:
These solution alternatives are only available for customes using HTML5 UIs. -
How do I move from one GUI screen to the next using J2SE?
Hi, How do I move to another screen (JFrame) from an existing screen (JFrame) using a JButton as the trigger?
There are hundreds of ways to do this, this one is
just a rather simple aproach
public void show(SomeType myParameter){
... do some work for preparing the Dialog for diplaying ...
this.setVisible(true);and use this instead of the call to
frame2.setVisible(true)Spieler -
Cant access serviceability from one CUCM server to the next
If I log into my pub and serviceability, I try to access my other subs. I keep getting an error when trying to access the other servers from the drop down list. Although, everything is replicating throughout the cluster, I can log into another CUCM and only use serviceability for that one server also.
Im going to do a reset tonight on the cluster. the logs are clean and clear on RTMT on all servers. It's very odd. I thought maybe a security password would be wrong, but there are no errors anywhere on any server in the cluster.Hi,
there is a bug associated to this issue
Unified Serviceability Tools can not connect to other nodes
CSCud67438
Description
Symptom:
Cisco Unified Serviceability pages Tools -> Service Activation or Control Center Feature or Network Services can not connect to other nodes in the cluster.When another node is selected the Status indicates Connection to the Server cannot be established (Unknown Error)
Conditions:
CCMService Tomcat logs indicates the following error message when attempting to connect to other nodes in the cluster,
{http://xml.apache.org/axis/}stackTrace:javax.net.ssl.SSLException: Certificate not verified.
Workaround:
We have the following workarounds
- Accessing SUB serviceability pages directly
- Restarting tomcat on PUB ( once ) after the upgradeFor SNMP configuration where same Community string needs to be added or modified on all nodes, again using a Subscriber node instead of the Publisher also seems to work in this case.
regds,
aman -
Passing table values from one webdypro screen to the next in BPM flow
Hi,
I have a BPM scenario where in User 1 will be entering data on a java webdynpro view in the form of a table. The user 1 should be able to edit contents of the table.
These set of values in the table from User 1 needs to be passed to User 2 through BPM. The User 2 should be able to read the values edited by User 1 in the table.
Please could you suggest how we could map the table attribute?
With respect to Context Elements, I have a Node created for the table. But, the data doesnot seem to pass from User 1 to User 2.
Any suggestions on this would be extemely helpful.
Thank You.Hi,
Please follow the below mentioned steps:
Create a Human Activity containing the task(WebDynpro Task) to edit the table values.
Create a data context of type (Context of the table node used in the Webdynpro task).
Map the output of the human activity to the input of the data context.
Create another human activity that contains the task to read the values of task1
Assign this task to User 2
Map the output of data context with the input of the second human activity.
Regards,
Gayathri -
Does anyone know the shortcut for this action?
Hi,
You can try '''Alt''' + '''Tab'''.
[https://support.mozilla.org/en-US/kb/Keyboard+shortcuts?s=keyboard+shortcuts Keyboard Shortcuts] -
I have an Ipad 2. My wife has an Ipad mini. When we plug in to Itunes (at different times) it synchs the apps from one Ipad on to the other. We don't want this. I have uncheked the box for Automatically synch apps, but it still does this.
How do I get Itues to see each Ipad as a separate item, and not try to keep them "equal" as far as apps installed?Remove the apps from iTunes with your device connected. You can basically deselect the apps that you don't want on each device. We have three IOS devices on one AppleID and they don't all have the same apps.
Maybe you are looking for
-
IPhone 4S iOS 7 not syncing - stuck on "determining apps to sync"
Hello all: My upgrade to iOS 7 started out smoothly enough, but now I have a problem. When I attempt to sync via USB, I get to step 3, "Determining apps to sync," and the sync doesn't go any further. I've tried it a couple of times now, and my curren
-
Airport extreme connection problem after adding computer to network
just added new imac to my network and for some reason my older imac {dome desktop} seems to have stopped recognizing the AEBS. the older imac was hooked up to the AEBS by ethernet and when i moved it across the room it fails to read the AEBS. I had i
-
Problem with opening a chm file in java.
Hi all, I m having an application in which i need to open a chm file from some gui interface. I m using the following code for that... Process theProcess =Runtime.getRuntime().exec("hh.exe RWXml.chm"); it is working fine on my machine. But when i dep
-
How do I manually change the order of songs in a playlist?
What am I missing?
-
Widescreen has black bars top and bottom
Imported a widescreen DV file into FCP5, rendered it, looks widescreen in the canvas but has black bars which are always exported. But I want to end up with a DVD that is full screen/widescreen when viewed on a widescreen TV or LCD monitor. How to ge