Text has moved off screen

whole program shifted substantially to the right and off my screen.

Hi Abhishek,
Thanks for your help, that is odd that it's fine on your machine!!
I've just upgraded my machine to OS X Yosemite and have the latest Chrome, but still shows the same problem.
Would there be something in settings, I don't have another machine to test it on.
Any ideas?
Many thanks
Darren

Similar Messages

  • Text, going from off screen right to off screen left

    using the basic type text button I want to type in a word and make it come from off screen right across the screen and off left.
    I can see every perameter in there apart from that one. I can change fonts, colurs, tranparency, but I want to use the key frmaes to go to off screen right move across the screen dead hgorizontal and finsih off screen left.
    Now I have done this by moving mouse to canvas and dragging it there.
    The problem is with htat is I may not be at the exact same horizontal value on the left sice ( finish ) as I was from the start ( begin ) so it might travel up hill slighly.
    Why is there not a right to left slider that I can use that makse sure that I dont mess with other values,
    So how can I do this very simple move easier please?
    regards
    Daz

    First, you're going to get better quality using the boris text 3d rather than the plain text option.
    But working the way you are, you can simply double click on your clip in the timeline, open the motion tab in the viewer and adjust the numeric value for the vertical position to match for each keyframe beginning to end. For best quality, use a whole number for the vertical position. I suspect that a little work with the manuals will help you here.
    Using boris text 3d and the controls tab (rather than the text generator you've been using), will give you better quality as each frame of text is generated for optimum quality (technically, the boris text is vector generated rather than bitmapped).

  • Layers Moving Off Screen When I click Around

    Hi everyone, I am experiencing an annoying issue with Photoshop CS5 12.0.4. In my normal and quick workflow I notice that at random times when I am in and out of the layers and onto the canvas, sometimes layers go sailing off screen eventhough I am not moving them. Its as if PS is tracking my movements off screen and just blasting the layers all around. I saw the problems last week sometime on the forum, but I can't seem to find the thread again. Anyone have any clue what the heck could be causing this?
    Running windows 7 x64, PS x64, I also have a Logoitech G9X high res mouse.

    Do you mean that the entire image pans out of sight, or further than you wanted it to?    It sounds like the flick pan feature that came in with CS4.  You hold down the space bar to pan, flick the screen with the left mouse button, and it keeps on going.  Is that what you mean? If yes, then left click the screen to stop the pan.
    Hmmm...  Reading your post again, I am getting the impression that you know your way round the app, and it is nothing so simple.

  • Zooming text out starting off screen

    Hi all,
    I'm trying to recreate the Star Wars title sequence and have no problem with the scrolling text, but I'm being dumb with the actul logo zooming out.
    I'm aiming to start with text zoomed right in so that some of the text is off screen. And then set it to zoom out so it is readable. But Changing the scale of the text to be zoomed in and part off screen just means that when I zoom out the edges are clipped and it zooms out the visible part of the text.
    Please point out where I'm missing the obvious!
    Thanks!!

    When you create a new title, it gives you a chance to size it. The default in a fairly standard HD sequence looks like this:
    Just add a zero to each value. That ought to give you plenty of room to work! (Edit: I just noticed it resized it for me!)

  • Text has moved in Google Chrome, but fine in Safari and Firefox?

    Hi,
    A client pointed out to me the other day that when they went onto my site using Google Chrome the Intro text
    had moved down but when viewed using Safari or Firefox it was fine.
    Does anybody happen to know why it has done this?
    www.segmentdesign.co.uk
    Many thanks
    Darren

    Hi Abhishek,
    Thanks for your help, that is odd that it's fine on your machine!!
    I've just upgraded my machine to OS X Yosemite and have the latest Chrome, but still shows the same problem.
    Would there be something in settings, I don't have another machine to test it on.
    Any ideas?
    Many thanks
    Darren

  • Om Mac 10.8 firefox window keeps moving off screen without me touching anything so I cant accomplish anything.

    I cant use firefox. It slides by itself of screen and I need to go to dock to bring it back. It happens every few minutes and sometimes even more frequently. While is off screen I am able to enter information into it. So it satays open but invisible

    Are you accidentally hitting the F11 key? That will cause any open window to slide off the screen.

  • Photoshop Window on Mac Keeps Moving Off Screen

    I've recently purchased a second monitor (27" Apple Display) for my Macbook Air. Everything is great, except photoshop doesn't want to stay put. When I move it into the screen, it immediately jumps back out of view. I've had some luck with it staying put if I make the window much smaller, but that defeats the purpose of having a giant display. I've tried clearing all settings while launching photoshop, it has had no effect.
    I'm using a 2013 Macbook Air 2013 running Yosemite 10.10.2. It's connected to the latest model Apple 27" display via thunderbolt. Photoshop is the only app playing up.
    I took a quick video so you can see what's going on.

    To the moderator who deleted this post, here it is my submission again with the only redactions I think could be even remotely expected:
    No, I am not "having a rough day", it's only 3:00AM here in California, I had a great day yesterday, I've had plenty of sleep so far tonight, and I'm going back to bed in few minutes. I'm just fine.
    As always in the forums, if you don't like an answer, you're always entitled to your money back: $0.00.
    All I had typed was "Ouch!" until you requested an elaboration.  It was that passive aggressive, insolent retort of yours that slightly annoyed me, nothing else.
    I couldn't care less about how you use your computers and I didn't ask you about it.  You could have saved yourself all the verbiage in your last post in its entirety.  Who cares?  It brings nothing to the discussion and I highly doubt it aides other forum users.
    You were the one requesting input not I, and you are the one with the computer issue, not I.
    I now see that you are not brand new to the forums, Mr. Zero Points, so the following clarification and reminder in the form of boilerplate text should not even be necessary.
    BOILERPLATE TEXT extracted from the FAQ:
    https://forums.adobe.com/thread/375816?tstart=0
    Do not be abusive or aggressive in your tone.
    An aggressive, demanding, accusatory or abusive sounding post will often evoke an aggressive or abusive and unhelpful reply.
    Remember, you are not addressing Adobe here in the user forums.  You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions. 
    [emphasis added]

  • Page stuck off screen

    While working in elements 11 organizer move page up and it moved off screen now can't get to top to move back.

    See if this solves the issiue:
    http://barbarabrundage.com/2014/07/16/stuck-windows-in-pse-on-a-mac/

  • My ipod has a black screen with a loading symbol (its moving) i cant turn it off or plug it into itunes its been like this for about 3.5 hours. i need help!!!

    my ipod has a black screen with a loading symbol (its moving) i cant turn it off or plug it into itunes its been like this for about 3.5 hours. i tried to do a system reset it after a glitched download. but while it was reseting it got stuck ot a black loading screen.
                                                                                               PLEASE HELP ME !!!!!!!!

    The article helped me a bit but it doesnt help me totally because the buttons dont work and i cannot connect to itunes (itunes does not sense my ipod when plugged in) so im thinking to just let the battery uncharge...
                                                                 but when it went down i was fully charged
                                                                                  (im very unpatient)

  • My MacBook Pro Retina's Bluetooth chipset unknown/odd login message on the login screen states Login Window Authentication Login window Name edit text has keyboard focus. In addition, the login screen is not remembering me

    I have been experiencing several issues with my MacBook Pro Retina mid 2012. My MBPR is scheduled to go into the depot. However, I am wondering if anyone may be able to shed light on a few issues as this is the third "official" time my MBPR is going back for service ("one depot" trip; "one authorized" dealer; several in-store visits).
    My Bluetooth is stating that the Bluetooth Chipset is Unknown (0). I also have had Bluetooth Preferences mysteriously change on me. In addition, while Bluetooth is off there are two serial modems turning on. I have turned them off, but they continue to pop up.
    In addition, when I log in, my MBPR is not remembering me and my login name is not appearing on the slate-gray screen. The name and password are blank and the following message appears in the lower left hand corner. "login window authentication login window Name edit text has keyboard focus."  As a side note, I am the only user. The login issue is a recent occurrence as we just totally wiped it again via a Command + R, and I don't believe I have an accessibility setting set to anything that would cause this, but wanted to check.
    Should I be concerned here? Has anyone else had issues like this? I don't want to worry if I don't have to. I have had so many issues over the course of nine months. 5-6 wipes. Airport card replaced and I am about to pull my hair out if my MBPR doesn't come back worldly like clock work this time. I just can't send my days trying to get a $2300 product to work for me any longer. No idea what is wrong with it, but it is driving me insane. Cross your fingers for me and any guidance you have or thoughts would be welcomed. Thank you. EMM

    A few more issues...
    In Console, the following is greyed out:
    User and Diagnostic reports
    Com.apple.launchd.peruser.0
    Com.apple.launchd.peruser.88
    Com.apple.launchd.peruser.89
    Com.apple.launchd.peruser.92
    Com.apple.launchd.peruser.97
    Com.apple.launchd.peruser.200
    Com.apple.launchd.peruser.201
    Com.apple.launchd.peruser.202
    Com.apple.launchd.peruser.212
    *[user logs are accessible]
    Krb5kdc
    Radius
    My guest files are locked, but again I am the administrator of MBPR.
    I am worried about a keystroke logged or at least, trying to rule it out.
    Also:
    Mdworker32(225) [and other mdworker numbers] are sandboxing; stating deny Mach-lookup
    Com.apple.Powermanagement.control, etc. long attachment with those files with version: ??? (???).
    Postinstall: removing applications/Microsoft Office 2011/Microsoft Outlook.app
    WARNINGS in Console include:
    [NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 19.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction] instead.
    There are a ton of other warnings. Before I go through this again, can someone tell me if this is normal (all of it -- above too); or if these are symptoms is a keystroke logger or hardware issues? 
    I ask because originally, when my computer went in for diagnostics (more than once), Apple stated the hardware was fine (other than Airport Card -- finally). However, if I've done 5-6 total wipes; created new users; do not have sharing set-up; have not played around in Terminal; and am up-to-date with versions -- and various issues KEEP COMING BACK -- I am left wondering if a keystroke logger would be possible here?!? I thought maybe a faulty logic board, but why would diagnostics be okay, then? Not trying to be hyperbole, just desperate.
    Please help me rule keystroke logger out or at least, tell me so I know, so I can take appropriate action. If you think it could be the logic board with symptoms above, that would be a great too.
    All I want to do is use the computer as intended, but I can't seem to get a real answer, so after nine months -- I am turning to the communities to see if anyone -- anyone at all -- can help. The last thing I can do is have the MBPR come back from the depot and the same thing occur. Any guidance or advice would be so gratefully appreciated.

  • Window Goes Off-Screen When Mouse arrow Is Moved To Upper Right Hand Corner

    It seems like this happened recently. When the mouse is moved and pointed to the upper right hand corner of the screen everything displayed goes off-screen to the right and left sides. The edge of the window is shown on the right side and a shadow on the left side- when I click on those everything pops back on-screen. I have a bad habit of moving my mouse quickly and this has become annoying.
    I thought it may have been a "Hot Corner" but I checked and this feature is not enabled(in Expose/Dashboard)
    How do I disable this feature?
    Thank you in advance.
    Steve

    Hello Steve:
    It definitely sounds like the hot corner "all windows" is enabled. There is a preference file that needs to be trashed, but I cannot figure out which one (no help to you).
    Be sure that none of the hot corners are enabled and then restart.
    You might also try resetting PRAM (although I do not think that will do anything).
    Barry

  • HT4097 Ipad screen has  moving lines on it and is unresponsive

    I have the 3rd generation Ipad with iOS 6 on it. I was using it yesterday when i closed my case, and left it for about 10 minuets. When i came back and opened my case, the screen was completley messed up! It has moving lines all over the screen that are a mixture of white, and grey. then it has an even darker moving pixel going across top top of my Ipad, about one inch from the top to be exact. the Ipad will lock and unlock using the top button, but thats all it does. The ipad will also not power off easily. The only thing close to it turing off was when i did a hard shut down and held the home button and the lock button at the same time, but after the screen turns off and i let go of the buttons, the ipad turns back on and goes back to the same lines everywhere.
    I purchased the ipad about 3 months ago and this is the first problem i have had. I have NEVER dropped it and the case i use is an Apple smart cover that uses a magnet to stay connected to the Ipad. I have also tried putting it in recovery mode and wiping my Ipad but have had no luck with any change. Please someone help me and figure out what i need to do.

    I hope someone can help as I have the same problem with my iPad!

  • How do I use serial port read and show text, but not have it scroll off screen?

    I am new-ish/returning amateur user of Labview and I am trying to edit the example VI "Advanced serial write and read VI" that is part of dev suite 2012.  I need to use the string box to show ALL text received from serial port, always appending and only rolls off screen when more real data arrives at serial port. 
    What is actually happening is as more bytes (or no bytes AT ALL!) arrive during read time, current text rolls off the string box.  Even when 0 bytes are received, screen is blanked out.  I am not very familiar with functions locations and even worse at understanding obscure references to functions, so please keep replies very basic so I can follow.
    Just to be clear, I need the string window to behave like hyperterm does-always shows data and it is not pushed out of window arbitrarily.
    Thanks,
    Steve  
    Solved!
    Go to Solution.

    OK- lets start back at the beginning.  I have a few questions...
    WHy does incoming txt get placed at top of txt box and then scroll up?  why would it make more sense to input at the bottom and scroll toward the top.  I have created this huge txt box that appears to be impossible to use.
    I have attached example of txt boxes I have tried, and pic of VI I have edited.  Bad marks for uglyness....
    Attachments:
    Capture_VI.JPG ‏117 KB
    Capture_VI2.JPG ‏133 KB

  • How would I be able to pull up all of the text messages tat were in my phone over the course of 2 years and back them up to my computer since my phone has a broken screen and can no longer read the mesages.

    How would I be able to pull up all of the text messages tat were in my phone over the course of 2 years and back them up to my computer since my phone has a broken screen and can no longer read the mesages.

    If the messages are stored on the device and you can power the device up you can use the application posted at https://community.verizonwireless.com/thread/770529  , the application has a screen capture option and you can use the screen as a guide to install MyBackup from Market or a number of backup apps from Market and then you can run the applications and backup data to your SD Card to restore to the replacement device.

  • My Iphone 4 has a cracked screen and has made it impossible for me to unlock my pin. I an giving the phone to a friend but want to know if there is a way I can ensure all my data is wiped off it before I do. Can anyone help?

    My Iphone 4 has a cracked screen and has made it impossible for me to unlock my pin. I an giving the phone to a friend but want to know if there is a way I can ensure all my data is wiped off it before I do. Can anyone help? I have upgraded to a iPhone 5 so Im not sure if the old one would have automatically wiped the old phone. I have lots of emails and messages I wouldnt want peo

    Have you synced this phone, with iTunes, while the passcode was enabled? If so, plug it in, iTunes running, & hit the Restore button on the Summary Pane. This will also erase the phone.
    However, if you have not synced, while the passcode was enabled, you will not be able to do this without first enereting the passcode. If that's the case, try recovery mode:
    http://support.apple.com/kb/HT1808

Maybe you are looking for