Text ID for documents

Hi,
we define Text ID for documents in OB56 & OBT8.
how to use and what is benifit of using it?
Regards,
Pankaj

Hi Praisty,
Thanks for the reply.
the solution you provided is not happening in my case like:
i have define following setting:
in OB56: Text ID: 0000 (only for Swaziland) 0100 to 0999
in OBT8: Text ID: 0001 Correspondence
In f-02, I am able use "=" for "0000" which is defined in OB56 and trange is when i use "0001" , I got error message "No standard text found".
I think what we define in OBT8 is Document Header text, but i don't know how to use it.
Please currect me if i m wrong.
Regards,
Pankaj

Similar Messages

Do you know how to change the Text Object for Billing Document?

Hi,
If you execute Transaction VOTX or VOTXn it will take you to Text Determination. The Billing Doc & Sales Document both has the VBBK as Text Object for me and is it like that for all.
I need to change the Text Object to VBRK for Billing Doc, which is the ideal because I am using the Function Module READ_TEXT to retrieve text. This work perfectly for Sales Document which has VBBK as Text Object, but does not work for Billing Doc where it through as error message saying Text 0020000021 ID 0002 language EN not found.
Thank You
Kishan

Hi kishan,
For updating these text you can use FM 'SAVE_TEXT'.
As for your problem, to get the parameter you need, go to the billing document, go to the text, and display it in plain page mode.
Then you do 'GO TO' -> 'HEADER', and a pop-up window open with the parameters you need Obect type, ID, Name, ...
Regards,
Erwan.

Post long text for document line item via FI-GL Inbound IDoc

Hi guru,
I am trying post extension ZFIDCP02 linked basic type FIDCCP02 and message type FIDCC2 IDoc in R/3 (4.6c) via IBM Websphere (Inbound IDoc),
I am use inbound function module IDOC_INPUT_FIDCC2 and activate exit 008 (EXIT_SAPLF050_008) and exit 002 (EXIT_SAPLF050_002),
In the extension ZFIDCP02 and under E1FISEG, I am add my segment ZITEXT include field TDSPRAS, TDID, TDOBJECT, TDLINE.
I am send ZFIDCP02 IDoc via IBM Websphere no error but all field TDSPRAS, TDID, TDOBJECT, TDLINE in my segment ZITEXT not post in FI-GL.
How can I post long text for document line item (ZITEXT) in FI-GL ?.
and I'm mean post ZITEXT to bank statement via IDOC.
Please throw light on this and may be I 'm want solution or example ABAP code for exit 002 (EXIT_SAPLF050_002).
Thanks in advance,
Akkapong Pirachai
CAT Telecom
Edited by: Akkapong Pirachai on Aug 20, 2008 7:40 AM

Close question because long time for answer.

Text determination for billing document

pls tell me text determination for billing document.pls tell me each and every phace for text determination for header billing document;
when am creting text determination am getting so many problems,
i saw in text form in header text,but i didnot get it in out put invoice,
pl send each and every phace of the text determinations,if possible send screen shots for text determination,
its urjunt

hi
1) T-code VOTXN ,for the text object Customer>Sales and distribution>click the Text types-->create your 4 digit Text ID
2) Come back to initial screen of this t-code and again selct the text object Customer-->Sales and distribution and click change. Select the text procedure and double click on the Text IDs in text procedure.Here you create a new sequence and select the 4 digit Text ID you have created initialy.
3)Asign the Text procedure which you have selected in step2 and double click onText procedure assignment .Here you assign the Text ID to the Customer Accout group.
4) In the customer master,sales area tab>Extras menu>text,Select the text which you have created now and enter text into it. and save.
The text which you have created now ,can be used for multiple purpose(Ex.sales order,delivery,billing,pricing,inforecords,legal). for example in this case, You just want to display this text during sales order processing,then proceed as follows,
5)T-code VOTXN ,for the text object Sales document>Header>click the Text types-->create your 4 digit Text ID.
6) Come back to initial screen of this t-code and again selct the text object Sales document-->Header and click change. Select the access sequence and create new acces sequence(This access sequence is similar to that of in Pricing).Select this acces sequence and double click the access sequence for text ids.Here in the first column this is Serial no.second column is text object(This is the area from which text has to be refer.In our case we have created the customer Text object for sales and distribution area,so i.e.KNVV) and the next column is Text id,This is the id which we have created at customer text object for sales and distribution initialy,at step 1). The next column is partner function,it will identify for which parter this text has defined.Next 2columns are Languages(if you want to define for all langugage or specififed language),next column is for specified languge for partner function.if you have any requirement to be fulfilled you can create those requirements in the next columns or else leave blank,save and come back to text proceudure.id.
7)Select the text procedure(for ex.01-Sales header) and double click on the Text IDs in text procedure.Create new entries Fill in the sequence and the text id which we have created for sales document-header(in step 5).There is a small check box in the 3rd column which is used whether the text should be refered or copied(this is used if you want to modify the text during the sales order processing or just dispaly the originail text as it is),next column is whether the text should be displayed while creating or it is not obligatory, last column is acces s sequce,this is nothign but the sequence which we have created in step 6) and save.
8)in the final step assign the text proceudre id to the particualre sales order.

It used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be.

I downloaded the pages application, to be used like " word", but I can't get if I can use it also to revise documents ....so as to make corrections and they appear on the text. thanks for the help

I downloaded the "pages" application, to be used like " word", but I don't know if I can use it also to revise documents ....so as to make corrections and they appear on the text. thanks for the help

tatarapido wrote:
I downloaded the "pages" application, to be used like " word", but I don't know if I can use it also to revise documents ....so as to make corrections and they appear on the text. thanks for the help
Why repeat the question in the description area? That provides no more information than just leaving the description area blank.
Yes you can edit documents in Pages. What can you not figure out that you want to do? Have you transfered a document to the iPad and opened it in Pages and tried to edit it?

Where to find out Text for document storage for HR Objects in E-Recruitment

Hi,
In E-Recruitment
1.For table HRP5121,there are some fields which store numeric values but points to a text in the document storage for HR Objects. Where can we find out the description for the text ?
2.Similarly for Resume attachment is there any way where we can find out where the resume or other documents are stored
For pt 1 Requirement is to create a report

If i am not wrong, resume attached would be stored in tables TOAHR and SDOKCONT1, and attached document can be accessed through PB30 --> Extras

Text Box in DOCUMENTS Tab when creating a Contract

Hi
I'm using SRM 5 , when creating a Contract(GOA), the minute you select the Documents Tab , the text box for internal note is already open, and it fills up the top portion of the screen. This does not allow you to save( or to put your contract either on hold, or to Release.) You cannot select any of those options as the text box covers the entire top area, the only option available is to click on "back to inital screen".
When you select this option you loose all your work,and it takes you to the initial screen.
I cannot find the note which has to be applied , please assist.
Thanks
T.

Hi,
Kindly review the following note:
1067625 - ITS TextEdit: Control overlaps other screen elements
This note should resolve this issue,
Kind Regards,
Lisa

ExtendScript: Get all text from a document

Hi all.
I have the following task: I need to translate a document into another language using ExtendScript. So, as "input" I have a document with a text/graphics/tables/etc. in Language_1 and a "somehow-separated file", which will contain data about translation into the Language_2. E.g.:
Some_text_in_language_1     Some_text_in_language_2
Some_other_text_in_language_1     Some_other_text_in_language_2
To get the source text from the document, I've tried to use this:
var pgf = doc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;
while(pgf.ObjectValid()){
     var test = pgf.GetText(Constants.FTI_String);
     var text, str;
     text = "";
     for (var i=0; i < test.len ; i +=1)
          var str=test[i] .sdata.replace(/^\s+|\s+$/g, '') ;
          text = text + str;
          PrintTextItem (test[i]);
     pgf = pgf.NextPgfInFlow;
But with this, I can only access the regular text in the document (e.g. the text in tables remains untougched). Is there any way I can the all textual data from specified document? Or maybe, the full list of controls, which can contain it, to iterate throught them and extract it one-by-one? Or maybe there's a better way to solve this problem?
Thanks in advance! Any advice would be greatly appreciated.

There is another way to loop through ALL paragraphs in a document, regardless whether they are in a table or in the main text flow. You can use the FirstPgfInDoc property of the document and loop through all Pgf objects using the NextPgfInDoc property of the Pgf until you reach an invalid object. Note that this also includes all paragraphs in the master and reference pages, so it might be useful to check where the Pgf is located (on a body page or not). There is a script on this forum that does that - I believe it was created and posted by Rick Quatro.
Working your way through the main text flow does not guarantee that you have all the visible text in the doc. There may be multiple flows and there may also be text frames that are placed inside anchored frames. Those text frames are not contained directly in the main flow of the document.
Good luck with your scripting
Jang

Document line item text in Clearing document

Dear All,
Document line item text
My client want the vendor invoice line item text(BSIK-SGTXT) to be captured in the corresponding clearing document line item text field(BSAK-SGTXT).
(i.e) The vendor invoice and its payment clearing document should have the same text in the document line item text filed.
According to me i can use a substition rule and a user exit to assign the values. but here comes a problem* i have one clearing document against 3 to 4 vendor invoice documents* so my programming logic has got stucked here? like which vendor invoice line item text the clearing document should pick up?
is there any other enhancements possible or can some one help me with the programming logic to be applied here.
Thank you
Regards,
Vasanth D

like which vendor invoice line item text the clearing document should pick up?
is there any other enhancements possible or can some one help me with the programming logic to be applied here
Why don't you discuss the issue with your client? As you said, if you pay 5 invoices in a single run, the payment document item text can't carry all of those texts unless you use the long text. What is the reason for the requirement? Perhaps there's another solution.

How do I make multiple text bold, for example scene headings or character names?

How do I make multiple text bold, for example scene headings or character names?

You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny

HT2506 In pages how can I link text within the document? I can find a bookmark option and links only allows me to link to a web page

Hi all,
This is my first time using this discussion site! Any help would be great, as I am getting very frustrated with pages!
What I am trying to do is link text at the bottom of a document to a page at the beginning of the document. I can't find a bookmark option adn when I clink insert link it only provides an options to link to a web page. Help! thanks

Bookmarks are missing (sadly) and with them, the ability to create an in document link.
I was looking for this feature in a Table of Contents. When you assign a 'style' to text in a document, you can Insert > Table of Contents. Then Pages will keep the TOC updated and you'll be able to 'link' from the page number in the TOC. (Not much help though, for the OP)

Tcode FV50: How to find long text in FI Document line item Before Saving.

Hi,
How to find long text in FI Document line item.
During Parking of the FI document through Tcode FV50 i m giving the some text in the long text not in the text field.
I would like to validate the Long Text Before Saving in user exit "U300" under the "Sunstitution" .
Please anybody can be help me out where exactly this long text is going to be stored or in which internal table or memory id.
Please give me the answer as soon as possible .
Note:- Read_Text function module is not useful. Because Read_text useful after saving document.

Hi Amit,
In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
Just try to explore in your system how the other validations are maintained.
After you are done with all your code, you have to run the regeneration program RGUGBR00.
Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS & TRACE PROG. GENERATE CALLS .
Hope this make your doubt clear.
Regards
Abhii

Master Text Frame for Page Heading

Hello, I am new to indesign and using CS4. Sorry if this is a newbie question.
I am creating a pdf digital presentation and laying it out. I want to create a consistent header on each page in the top left corner and ensure it is in the exact same location on each page. I also want to make sure the text size, font, and color is consistent on each page. Most importantly, if I need to change anything, lets say a font, I want to only do it in one place and not do it on all 20 pages in my document.
My understanding is to add a text frame to the master page. However, how do I edit the text on each page and not have it show on my cover page which is page 1 of my document?
Thanks!!!!

Create a text frame on the master page (make it wide enough and deep enough for the longest heading)
Insert some generic text like "Heading"
Give it a paragraph style
Adjust the paragraph style to your liking
Go to each page you want to change, and CTRL SHIFT (cmd shift on mac) and double click the "Heading"
Change the text to what you want it to look like.
To alter the text colour/font etc. for all of them - adjust the paragraph style
To edit the text style for each heading so they look different in terms of colour etc. - just change the Character Colour via the swatches.
if you do this, then any changes to the Paragraph style should follow through on all pages - except where you've perhaps changed the character colour (or any other hand-adjusted changes to the text.
Also - if you move the Text Frame on the master page they should all move on the corresponding pages, provided you haven't moved them by hand on the actual pages.

Text Area for long text not appearing properly for BBP_POC_DISPLAY Service

Hi,
In our development we have added additional Icon at ITS in Process PO transaction and onclicking that icon Web dynpro AB screen called with the Purchase Order No of selected row .(SRM 5.0)
There is one more icon in Web dynpro screen on click of that Purchase order service open in ITS with display mode .This is achieved with service BBP_POC_DISPLAY from Web Dynpro-AB.
This is also working ok only the issue is in Document tab of PO The Text Area for long text appear at Top .This functionality is working fine with BBP_POC service from ITS .
Has anybody faced this kind of issue ?
Thanks,
SMS

Hi SMS,
I am unsure of the additional component you are talking about. In general, issues with text area misplacing, is solved by note 1067625. May be you can check it.
thanks,
Ashwin

Text ID for documents

Similar Messages

Maybe you are looking for